Scenario is HTTP to db. In HTTP client, when Sender is Business Component, Pi is getting data successfully but when Business system is used as sender Pi is not getting any message in sxi monitor. Please help
Scenario is HTTP to db. In HTTP client, when Sender is Business Component, Pi is getting data successfully but when Business system is used as sender Pi is not getting any message in sxi monitor. Please help
Hi Ankita,
Try to trace at ICM level, Go to smicm transaction
Set level to 3.
Later send your request. Finally trace the request in:
When you have seen the log, check if any exception is raised with your request or the request and share it here.
Regards.
Similar Messages
-
I do a movie whith iMovie. I finalize the project and I pass it to iDvd. Then I do a little menu and I burn my DVD. When I play my DVD on a computer or in my TV it ALWAYS begins directly with the movie and not with the menu... PLEASE HELP!!!!
Go to the Map mode in your iDVD project and make sure the blue bin at the left is empty. That's where you drag slideshows to if you want the DVD to open immediately to that slideshow and bypass the menu.
Click to view full size
If there is an item in there drag it out.
OT -
For the last month or so my icloud won't back up, it keeps telling me that there is too much storage and I need to delete some data. But I have deleted between 3-400 photos and it is still saying the same, can anyone please help
If they were deleted from your camera roll that should have resulted in a corresponding decrease in the estimated size of your next backup.
If it's still saying that you don't have enough storage to back up, read through this article: http://support.apple.com/kb/ht4847. It provides some suggestions for reducing your iCloud storage, such as deleting unneeded email.
The other area to look at is your text messages. These are included in the backup. If you have lots of photos and videos attached to your messages, that can significantly increase the size of your backup. If that's the case, deleting these may make a big difference. -
Query Prepared Statement Does NOT Return ANY Values !URGENT! PLEASE HELP...
Hi,
Please help me in the following.I'm desperate...
I'm using PreparedStatement to do multiple queries in the same Table of a Database(ACCESS).
The rows of the Table look i.e like this :
(TABLE NAME == PERSONS)
PERSON_INDEX__TIME_PERIOD_________SPORT
1_______________1________________Basketball
1_______________2________________Football
1_______________3________________Tennis
2_______________1________________Something
I populate my PreparedStatement using something like :
java.sql.PreparedStatement st = con.createPreparedStatement("SELECT SPORT FROM PERSONS WHERE PERSON_INDEX=? AND TIME_PERIOD=?");
Now, when I do something like :
try
st.setInt(1,1);
st.setInt(2,1);
st.addBatch();
}catch(SQLException e){}
st.executeQuery();
ResultSet results = st.getResultSet();
while ( results.next() )
System.out.println("->"+results.getString("SPORT"));
I trully get as output :
->BasketBall
But when I populate it some more :
try
st.setInt(1,1);
st.setInt(2,1);
st.addBatch();
//***Query some more***
st.setInt(1,1);
st.setInt(2,2);
st.addBatch();
}catch(SQLException e){}
... and I execute I DON'T GET :
->BasketBall
->Football
but NOTHING!!! - the ResultSet HAS NO ROWS
This thing is driving me mad.
Can you please help me out?
Please post the code if neccessary...There is something wrong in your understanding of batching the statements. Basically you will add either update or insert or delete statements to your batch.
If you add a select statement, it will throw 'java.sql.BatchUpdateException: invalid batch command'. And moreover 'st.executeBatch()' is the method you need to invoke.
If you don't execute the batch using 'executeBatch()' method then, it must throw the exception,
'java.sql.SQLException: error occurred during batching: batch must be either executed or cleared'.
You need to rework on your code, I believe.
Sudha -
I have a 5th Gen iPod Touch. I went in iMessage to save videos that were sent to me in my camera roll. The videos do not appear in my camera roll but my memory keeps on going down. I do not know how to solve the problem. I do not want to restore my iPod but I want to get my memory back. Please Help ME
Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
Come back with the results.
An "other" larger tha about 1 1/2 usually indicates that the "other" includes corrupted files.
First try:
"First you go settings/general/usage/music/then left swipe over music and press delete and you would think it deletes your music but it doesn't instead it deletes your other but make sure your ipod is connected to a computer while doing this"
as recommended by:
How do I get rid of "other" storage: Apple Support Communities
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software -
Bluetooth did not detect any Bluetooth device even iPhone please help me
I have iPhone 4 my Bluetooth did not detect any Bluetooth
Device even iPhone so I can not transfer any data to other iPhone
Please help meThat is correct.
This has never been a feature of iphone.
Sorry.
Bluetooth is supported for stereo headsets/speakers, telephone headsets/handsfree devices, some keyboards, some peer-to-peer apps from the apps store, tethering where provided by the carrier.
Other than these, it will not connect to another phone/device/computer/etc. -
Need to know how to get it back to its original Download Stack. Previous answers to this questionin Apple Support just don't make any sense to me. I'd appreciate explicit directions on how to restore this feature. Currently it's just a Download folder... must have accidently poofed it away.
Help!And if what WZZZ suggests doesn't work (and hopefully it will) move the file name below to the desktop, log out or restart and the Dock preferences with its defaults should be recreated. You'll need to re-configure it as you like it:
com.apple.dock.plist
It's located: in Finder hold the Alt/Option key and from the Go menu select Library>Preferences.
If it fixes things, delete the file on your desktop. -
screen is off and black. Won't turn on. trief charging but still won't work. its like it's dead but it was fully charged when it just turned off.
Try a reboot press & hold down power button & menu button hold both down and wait for
the Apple Logo this may take upto 20 seconds then see if iPhones comes on
if not take to Apple store.
bsydd uk -
My office just bought me an iMac and I absolutely need to hook up a second monitor but there is no DVI connection on it, just a Thunderbolt. What do I do? Please help ASAP!!! The imac is a 21.5" and they also already bought an HD 21.5 ASUS LCD monitor to attach to it. I'm really trying to make this setup work but this is becoming a nightmare. Any suggestions? I looked up different VGA adapters but the only options for this would be a usb-vga connection which doesn't work on macs. Can anyone tell me if this new Thunderbolt connection will work in some way? Thanks
Using the Thunderbolt port attach a Mini-display to DVI so long as the Asus display is equipped and capable, otherwise Mini-display to VGA will also work. The Thunderbolt port is ahead devices which are not yet available to take advantage of the increased capacity in speed. Until the devices and connection cables are available, just use the port as a Mini-display port.
-
My iphone will not sync to itunes. It will connect to the computer but will not show up anywhere in itunes. PLEASE HELP!!
Hey there Kellee,
It sounds like the device drivers for your iPhone are working in Windows, but the phone is not showing in iTunes. You should be able to get that showing again with the steps in this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Start with these three steps, and there are more in the article if you need them.
1. Update iTunes
Check that you have the latest version of iTunes installed on your computer. In iTunes, select "Check for updates" in the Help menu.
2. Check the USB cable
Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
USB cables that are bundled with third-party products or accessories might support only charging those products (and not transmitting data) or they might work only with the product with which they were sold. Using one of these cables to sync could cause issues. If you are using a third-party case, such as an extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
3. Verify that Apple Mobile Device Support is installed
iOS devices require Apple Mobile Device Support, which should be automatically installed with iTunes. To verify whether it is installed, follow the steps appropriate for your Windows operating system below.
Windows XP: Click Start and choose Control Panel. Open the "Add or Remove Programs" control panel and verify that Apple Mobile Device Support is visible in the list of currently installed programs.
Windows Vista and Windows 7: Click Start and choose Control Panel. Click "Uninstall a program" (or if using Windows Vista's Classic View of the Control Panel, click "Programs and Features"). Verify that Apple Mobile Device Support is visible in the list of currently installed programs.
Windows 8: Move the cursor to the upper right corner, click the magnifying glass, type Control Panel,and press Return. Click "Uninstall a program". Verify that Apple Mobile Device Support is visible in the list of currently installed programs.
If Apple Mobile Device Support is not listed, remove iTunes, QuickTime, Apple Software Update, Apple Application Support, and then reinstall iTunes. Follow the steps appropriate for your Windows operating system below:
Reinstall iTunes for Windows XP
Reinstall iTunes for Windows Vista, Windows 7, or Windows 8
If after reinstalling iTunes Apple Mobile Device Support is still not installed, follow steps in Trouble installing iTunes or QuickTime for Windows.
Thank you for using Apple Support Communities.
Regards,
Sterling -
I live in Nepal. I can access for the first time at the time of using itunes. There isnt option of NONE in the payment mode.Please Help Me Out !
AshimPoudel wrote:
I have problem still. Is this payment important to create a free apple ID???
Not sure what you are asking...
Apple ID FAQs
http://support.apple.com/kb/HE37 -
Hello any time an email come and open it with firefox i can not translate it in to greek i can not find where is this option too. please help me and thank you very much
in the next link http://translate.google.gr/?hl=el&tab=wT copy and paste the text you want to translate in greek.
thank you -
HT5312 I do not remember the security answer apple ID.Please help.Thanks you!
I do not remember the security answer apple ID.Please help.Thanks you!
If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then steps 1 to 5 on the page that you posted from should let you reset them : go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account, then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use -
I received a replacement iPad. On my original iPad I had dozens of books and PDF's. I completely backed up my original iPad. The categories of my iBook files transferred but NOT the actual PDF and Books. Please help.
Are the PDFs and ibooks on your computer's iTunes ? If so then you should be able to re-sync them, if not then you can re-download ibooks for free as long as they are still available in the store and you use the same iTunes account as you originally used to buy them : http://support.apple.com/kb/HT2519 . The backup doesn't contain the contents of the ibooks app, so for them to be restored to the device they needed to be in your iTunes library.
-
my apple id have been blocked an i do not remember the identity or security question please help what can i do?
If your account is disabled you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
You might then need to log out of your account on your iPhone and iPad by tapping on your id in Settings > iTunes & App Storeand then log back in so as to 'refresh' the account on it.
For your security questions, if you have a rescue email address (which is not the same thing as an alternate email address) on your account then the steps half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address then you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699 (you can also try this link if you can't get your account enabled via the above)
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use
Maybe you are looking for
-
I have almost 1200 contacts in my Outlook, all of which were assigned to a Category, so I could look people up by that Category. Almost 900 of the Category assignments are now blank. I am a recent iPhone user. When I had my BlackBerry, you could see
-
After upgrading to 3.6.9 firfox will not bookmark some pages, once would not load, has twice atomatically re-installed 3.6.2. Upgraded again to 3.6.10 had have same problem with bookmarking
-
Creating Bookmark in Publisher
I have to create a report with Bi Publisher that shows on the left the bookmarks when it's outputted in PDF format. I created a template with a table of content and I added <?convert-to-bookmark?> but the result was that I had the bookmarks but they
-
my ipad mini was stolen. it is showing in icloud as offline. i did not install the i0S7 update. with that being said, is it possible for my info to have been erased ?
-
(COMPUTEX2014) First look~MSI Gaming Notebooks launch
The biggest PC festival will open its door from 3rd,June to 7th June, 2014 at NANGKANG Exhibition hall Let's take a look at the MSI notebook booth to check out if any special here. 4 monitors output of GT60 2PE Dominator 3k version Kaveri APU: FX-760