Scenario Message not created

Hi,
I am doing File to IDOC scenario. The source file
adaptor is showing "Functioning" in "CC Monitoring"..
But in Message Monitoring the Message is not created.?
thx
Mukharji.

Hi Mukharji,
Use this link and check the log of your FILE adapter.
http://<host>:5<nn>00/AdapterFramework/monitor/adaptermonitor.jsp
Mickael

Similar Messages

** File to IDoc scenario - IDoc not created in target system

Hi friends,
We are doing File to IDoc scenario. We made required setting in both application as well as XI system. While test the scenario, the file is picked up and successfully processed in SXMB_MONI, but the inbound IDoc is not created in target system. What could be the problem?
We are using DEBMAS message type DEBMAS06 IDoc type. We checked the following.
1) SM59 - Connections are OK both application and XI system
2) IDX1 - In XI System, we have assigned SAP<R/3> port.
3) IDX2 - IDoc is imported.
4) In ID - Sender File - Business Service - Adapter-Specific Identifier - Logical System name is given.
5) In application system. - Partner Profile maintained correctly.
6) SM58 - There is no error.
So, what could be the reason ?
Kindly reply, friends,
Thanking you.
Kind Regards,
Jeg P.

Hi,
Check all the steps ..
File to IDOC
Do these configurations in R/3 and in XI...
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
Thanks,
Satya

Partner function copied from PO to Outb.del. but output message not created

Hello Gurus,
As the copy of the partner function from the PO to the Outbound Delivery is not supported in standard, I have activated userexit_save_document_prepare (MV50AFZ1) where I can add the other partner roles out of the purchase order into table XVBPA (VN). Thanks to this exit, the partner function VN is correctly added in the Outbound Delivery.
My issue is the following this partner function should create an output message using the partner function VN but this one is not created during the Outbound delivery creation. But if I go to the VL02N and just save the Outbound delivery again (without change) now the output is correctly created and processed.
Does someone of you know the reason why the output message for partner VN is not triggered at the Delivery Creation but
after the manual save?
Kind regards
Chris

I have just explained this in Copy partner from PO to inbound delivery

Service Message not created in 4.6c

Hi all
We are using SLM 3.2. I am facing problem in creating support message from satellite system (4.6c) it returns the following error:
Error in local message system: Function module
"/SAPSMOSS/06_CREATE_R3_NOTIFIC" n Message was not created
Kindly give me the solution
Thanks.

Our satellite system configuration is:
Basis support package level is 27 (release 46C)
ST-PI Release 1.00_46C level 0000
Entries of BCOS_CUST are:
column1         column2     column3     column4          column5
OSS_MSG     S          SLM     CUST31H          1.0
Any suggestion

Classic Scenario PO not creating, only PR

Hi,
I'm using SRM 5.0, in classic scenario to R/3 4.6C. My Shopping Carts to R/3 are complete, but is not creating a PO. It creates a PR. If i run, ME57, assign and process, PR is already assigned a Fixed vendor, and PO is created without any further data being added. (Vendor, price, etc)
I'm confident my number ranges and Doc Type settings are correct.
In SRM customising, my 'Define Objects in BE Sys, has vaild P.Group, Cat Id, R/3 Source sys, Always external and PO if item data complete'.
When I trace RFC, RSRFCTRC, it is calling BAPI_REQUISITION_CREATE. Not BAPI_PO_CREATE1. Vendor master, set to auto create PO, not using material masters. Mat group and Vendor replicated from R/3 to SRM. Tax is calculated in R/3.
Any help appreciated. Is there a FM in SRM to test why its not creating a PO?
regards Adam

Hi
Couple of reasons might be possible ->
1) Try de-activating all the Custom BADI Implementations using SE19 Transaction (name starting with Y or Z) in SRM System for the time being, and then try out again.
Seems to be some BADI - BBP_TARGET_OBJECTS
BBP_TARGET_OBJTYPE might be over-riding the back-end documents creation.
2) Incase above step, does not help, Try creating a PO or PR directly into R/3 system (using ME21N or ME51N Transactions with the Document typeused in SRM), with the same data that is passed in the RFC call (you traced earlier) then see, what is happening in that case ?
Do let me know.
Regards
- Atul

HTTP to RFC scenario (Message not coming to PI)

Hi PI Gurus,
I got one HTTP to RFC scenario. Its working fine in production. where as it is not working in QA sys.
Messages are not coming to PI (SXMB_MONI). Is anything is missed in SICF or SMICM.
Thanks,
Krishna

Hi,
How you are testing the interface.........if you are sending the message from HTTP client web page then check the error message in same web page.
for reference check below link.
http://www.****************/Tutorials/XI/HTTP/RFC.htm
HTTP client code.
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/66dadc6e-0a01-0010-9ea9-bb6d8ca48cc8
Regards,
Phani

Extended classic scenario PO not created

Hi Guys,
Hope someone could give me some hints on this.
This is an isolated case.System works fine for all other shopping cart except for below case.
The shopping cart approved and suppose to create the PO. I could see the PO number generated in BBP_PD for the shopping cart. But the PO not exist in neither in SRM or R3. The status for followon document created is active. There is no any error in transfer reported in BBP_PD for the shopping cart.
I tried to resend the the shopping cart using bbp_pd_sc_transfer but it does not solve the issue.
How could I re-trigger the PO creation and update the PO to R3 again.
Thanks in advance.
Mike.

Try TXN SW01 for the business object BUS2121 and the Shopping Cart number; create a instance and ' execute the method 'Set Released'; this must create a PO if not you need to inform your technical team this error, as it might be a technical error and you can simulate this scenario from SW01.
Please reward point if useful.
Thanks
Kasee Palaniappan

ME41 - Output message not created

Dear all,
I must send RFQ by mail. I have used the same configuration of message as purchase order (that works fine).
In RFQ I have this problem: it doesn't create the message. If I see messages screen, I don't see the line with my message.
If I go in 'determination analisys' I see that the output is found!
Help me, please.
Marianna

Have you maintained condition entry in MN01 ?for Rfq.
If not maintain the condition record to trigger automatically.Check the condition is green in determination analysis.If it is not green then you have to maintain condition record in MN01 as per access sequence

Extended Classic Scenario does not create backend PO

We have SRM 5.0 SP 11 with ECC 6.0 backend (only one comp code, one plant and couple storage locations in the plant). I am configuring extended classic in there with the Org structure having Local Purchasing Org/ Local Purchasing Groups and the ECC Purchasing Org/ ECC Purchasing Groups.
It appears I am missing something; the system creates a Local PO just fine, however, dont see any signs of the system attempting to create a PO in the ECC system (no runtime errors or logs in either system).
In fact, my shopping cart does not show any value for Location (although the Org has the ECC location assigned to the user).
Any help is highly appreciated. Thx.
Raja

ECC 6.0 is ERP_2.0 and not R/3_4.70.
also check the resp org unit consistency with BBP_BP_OM_INTEGRATE
with the option all object types.
if I am not mistaken there are some FMs to push the copt again
like
BBP_PD_PO_transfer
(pl check the syntax... don't have system)
also check on "bachend prgp responcible" for yr ECS settings
also check the logic if you have implemented
BADI control ECS
BR
Dinesh

EDI message not created because ALE_SERIAL_CHANNEL_GET fails / table TBD56

Dear experts,
I am trying to create an Idoc in SAP ECC 6.0. To my knowledge, all EDI/Idoc settings have been done correctly but for some reason the Idoc is not being created.
Functionmodule ALE_SERIAL_CHANNEL_GET returns an error; it can not find an entry in TBD56.
Where (which transaction) do I have to fill settings so this table is being filled?
Thanks in advance,
William

Hi Isaac,
Please create Bapi using your repective Progamme and try to give the Resepective conditions related to pricing from XML file.as you are saying you are doing this for testing.hope aware that while creation of BAPI if the certain condition are not matching or if the data is incomlepte you will get this kind of errors.
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Error in Trace Level: could not create BPE proxy for message, no XML objec

Hi
We are doing a scenario of File to RFC using BPM and I am getting this errror in Tcode SXMB_MONI.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No object type found for this message; check the activation of the corresponding process</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
And getting this error in Trace level
could not create BPE proxy for message, no XML object definition found for message EB32BB50610A11DC9648001321CB837D
Why this error occurs?
What could be in error?
Thanks in advance
Regards
Sami Qureshi

Hi Sami,
Check if thse threads can help u,
Error in BPE Adapter
BPM - BPE_ADAPTER errors
BPE Adapter Error
Exeception during execution error
***********Reward points if helpfull************

Getting error message "Could not create work area" when I open Bridge CC.

I am getting an error message "Could not create work area" when I open Bridge CC.
I have reset my workspace. I have closed and opened Bridge CC. I have deleted the !!-$$$AdobeOutputModule.workspace file in /Library/Application Support/Adobe/Bridge CC/Workspaces folder.
I am not an expert computer user, so please explain in detailed steps like I am 5 years old. Thanks in advance for any help.

I am experiencing the same problem!
My mac is OS X Yosemite (10.10.1), Photoshop CC 2014.2.1, Bridge CC 6.1.0.115 and Camera Raw 8.7.0.309

Account document not created Message no. VF062 for the pricing procedure

When I tried to create an invoice I came across this problem of Account document not created Message no. VF062.
I created a pricing procedure with base price,BED,EDU CESS,HIGH EDU CESS ,VAT,CST.
Condtion record was set for each pricing condtion type.
Sale order>delivery->invoice
When invoice was stored i get the message accounting document not created.
After that i changed the condtion class of (BED,EDU CESS,HIGH EDU CESS ,VAT,CST.) from D-tax to B-price.Now the invoice is stored without the messag(accounting document not created).What will be the problem associated with this

i changed the condtion class of (BED,EDU CESS,HIGH
EDU CESS ,VAT,CST.) from D-tax to B-price
Whaterver condition types you have with condition class as D, I am sure, you should have assigned some Account Keys in your Pricing Procedure. Ensure that those Account Keys are appearing in OB40 as otherwise, you will face this issue.
G. Lakshmipathi

FCN Document not created for SO : Message SY499-Urgent

While Saving delivery or doing PGI or while processing billing document i am getting below info message.
"FCN Document not created for SO " Message SY499.
I dont know why this message started coming now. I have added my country in VI49 settings. I wonder that due to that this message is coming.
I dont want this message to come whiel delevery processing. Pl. let me know how can this be possible.
Regards,
Vijay

Hello Sheila,
sorry - my first answer was in mistake - Status K means:
"The transaction is processed using payment cards. The order, however, does not contain valid authorization.
This problem occurs in billing documents for follow-up deliveries."
Could you check this ? Last way would be to set a breakpoint into the FM 'RV_ACCOUNTING_DOCUMENT_CREATE'
and trigger this via VF02 -> Release to accounting.
Regards Wolfgang

Empty File Handling : Do Not Create Message

Hi,
I have set this option in Sender CC - file.
Parameters --> Processing.
I dont want to pass file to reciever , when file is empty.
Will the above option "Do Not Create Message" do the trick.
OR do i need to choose something else??
-santosh.

Santosh,
Yes. The trick will work for empty file handling.
When your incoming file is empty then will be no xml message posted to IE and hence receiver will not get any message.
FYI: Also you can use skip empty files which will do the same but here the files will remain in your source directory.
Regards,
Prasanthi.

Scenario Message not created

Similar Messages

Maybe you are looking for