Scenarios for some of the Exception Aggregation
hello Experts,
Please explain some scenarios for the following Exception Aggregation:
1. Counter (value not equal to zero)
2. Counter (all values)
3. Average (value not equal to zero)
4. Average (weighted with no. of days)
5. Average (weighted with the number of workdays; factory calendar)
Thanks in advance.
Regards
Lavanya.
Hi,
check this link
http://help.sap.com/saphelp_nw70/helpdata/en/82/f2dc37f0f12313e10000009b38f8cf/frameset.htm
hope this helps you
Best regards,
Ramesh.
Similar Messages
-
Unable to Create or Extend customers for some of the co_cds
Hi Folks,
We are creating customers for some of the company codes to client org. it has number of company codes. we are able to extend customers Except Italy, Iraq and Nigeria Co_cds. The reason given is that field KNB1_QLAND is not on screen SAPMF02D 0610. This field is for With Holding Tax. Recently we have upgraded to ECC 6.0 version from R/3 4.7. what is cause to not creating customers for some regions.
Please give some needful suggestions.
Thanks
Vinay.Hi Vinay,
It looks like that in the customization "Assign withholding tax type to company code" in SPRO, subject to w/tx is selected in customer master data section. So, system is expecting the relevant informtaion. Check in Customer account group field status (T. code OBD2), the Withholding tax country field might have been set as suppressed. Check it and correct the same.
BR
Amitash -
Misuse of the exception aggregation
Hi Expert
I have a little particular need which I have of the evil to carry out. I explain you, you certainly already had it.
In my cube I have collect, sold to, orders attached to contracts and a surface of contract like this:
Surface
R1 Soldto1 Cmd1 Ctr1 10
R1 Soldto1 Cmd2 Ctr1 10
R1 Soldto1 Cmd3 Ctr1 10
R1 Soldto2 Cmd1 Ctr2 20
In my request, I would wish to have:
R1 Soldto1 10
Soldto2 20
R1 (next level aggregation) 30
I use the exception aggregation on the contract (exception average by contract) but I don't succed to have the results expected.
My query sends me the result below:
R1 Soldto1 30
Soldto2 20
R1 (next level aggregation) 50
How then I to solve this problem? Please help
Best regrads
EricHi Eric,
For your expected result, I think you should use exception aggregation Average with reference characteristic Cmd
as it is the one which differs for the three 10 values.
With this setting, R1 level should also be 30 as you expect.
If you use "Ctr" as reference characteristic, then the three Cmds get aggregated (summation) for Ctr1, that's why you get 30
like "R1 Soldto1 30".
Hope this helps.
Regards,
Patricia -
I can't seem to update my apps or make any purchases on from my account. Nothing has changed with my credit card information and for some reason the iTunes Store tells me my information is incorrect. What do I do?
Yes, it's frustrating.
I don't have my iPod with me but, as I recall, the change is done in Settings/Store. That change will apply to NEW purchases. However, be aware that all purchases are permanently associated with the Apple ID that was originally used. Generally, it's only a problem when you need to update an app. IF you do your updating from iTunes and your logged in to the "wrong" ID, you'll need to log out and back in again. It's easier from the iPod as you do not need to log out/in but you do need to know the password.
Unfortunately, you can not merge IDs nor can you transfer purchases from one ID to another. Go here to find out exactly what you have. I have the same problem so I deliberately made both passwords identical to make things slightly easier for me. -
Hi All,
I am currently trying to backup my iTunes library onto an external hard drive so that I can copy it onto my new Macbook Pro. I have been following the steps posted on the Apple website however each time I get a dialogue box stating:
'The operation cannot be completed because you do not have sufficient privileges for some of the items'.
Is this because I have items that were bought under another persons iTunes account? If so, is there a solution to this problem? Or am I doing something completely wrong?
Thanks in advance,
Sbrooks19Go through the below forum with similar issue and follow the process mentioned by "Macjack" in the beginning.
https://discussions.apple.com/thread/4499820 -
I'm trying to create a new ichat Acc because for some reason the old one is not working, so I go to Create an Apple ID and start creating a new apple ID, when I submit the Acc it tells me that my Email address is already verified for another Apple ID and thats the only email address I have... What can I do?
There is no way to consolidate iTunes accounts.
Setting up an iPhone has never required creation of a new Apple ID.
You've apparently purchased content with both Apple ID's. Sign into the device with the correct Apple ID and sync the content. -
For some reason the system is telling me my birth date is wrong when it's not and it won't let me proceed to reset my password. Can someone tell me how to get a "real" person from tech on line?
contact itunes support
-
<blockquote>Locked by Moderator as a duplicate/re-post.
Please continue the discussion in this thread: [tiki-view_forum_thread.php?comments_parentId=702631&forumId=1]
Thanks - c</blockquote>
== Issue
==
I have a problem with my bookmarks, cookies, history or settings
== Description
==
How can I get the default value of a particular preference in FireFox?.
I know I can see the default value for some of the preferences in about:config but, I need a programatic way to get the default value.
I see some that there are values for preferences in firefox.cs but I am not certain that these are being used as the default values for preferences. prefs.js in user's profile only has the updated values and not the default values.
Any help towards acheiving this programtically is greatly appreciated.
If the default values are stored in a file, kindly let me know the format in which it is stored for me to parse it programatically.
== User Agent
==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)Dear Friend,
Here when you have the callableSattement as ?=proc(?), the first ? is an output parameter. So you should register it as out parameter using registeroutparameter.
Then you can get the value from the outparameter using callablestatement.getXXX().
Try that way.
For free tral versions of JDBC Drivers go to www.Atinav.com -
For some reason the Apple ID window in iTunes and App Store now seems to suddenly have a character number constraint which prevents me using my 29 character Apple ID. As a result I am unable to enter the final few characters of my Apple ID which I have had for many years. Does anyone know what has caused this?
You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
(118441) -
I just bought a 5s and when I tried to sync it stopped saying my computer was no longer authorized for some of the items on my iphone. I went to store/authorize this computer and it said the computer was already authorized. How do I fix this?
I have the same issue. There are some suggestions to follow in the Apple support article http://support.apple.com/kb/TS1389 They didn't work for me but they may for you. My old iPhone 3S and iPad 2 syncs fine with iTunes.
-
In trying to update to Firefox 3.6.11 on an intel mac g5, I get this message: the operation cannot be completed because you do not have sufficient privileges for some of the items -- any suggestions? thanks!
You can try to repair the permissions for the Firefox application files and folders.
You can also do this:
* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data. -
I have changed my apple id on the manage my apple id page. For some reason, the id didn't change on my macbook air. My iCloud still registered my old email id and I can't get it to recognize my correct id. Any ideas? Thanks!
Hi Baem_leeds
Welcome to the Support Communities!
If you change your Apple ID you will need to sign in with the new information or password the next time you use an Apple service or feature that uses Apple ID. If you have multiple devices that use features and services that require an Apple ID, you will need to sign in again on each device.
The links below will provide additional information:
Where can I use my Apple ID?
http://support.apple.com/kb/HT5616
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
Cheers,
Judy -
I have recently dropped Earthink as me dial-up provider. I now am using Virgin Mobile Broadband2GO. I was using Safari. I am now using Yahoo! Mail Plus. It suggested I switch to Firefox. I had an older version of Firefox (2.0.0.6) and started using it. It suggested I needed to upgrade because many of the newer web sites wouldn't work well on this older version. I downloaded the newer version and proceeded with the installation and it would tell me this: '''The operation cannot be completed because you do not have sufficient privileges for some of the items.''' I have re-downloaded and tried it again two more times. I haven't a clue what that means or what to do about it.
If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox -
I need some help resizing my images on PS6. I am using a mac and have been trying to resize with same resolution and constaining proportions but for some reaseon the smaller resized image appears pizelated. Heres an image of before and after. The first image I use is a JPG 72dpi 1500px x1500px and I want to downsize it to 600x600px same res, but it keeps pixelating, this has never happened before. Any suggestions, thoughts?
thanks!I wouldn't say pixelated; more like blurry.
Like ConnectedCreative said, what steps are you using? Are you using "bicubic sharper" when resizing down? -
Hi, I have backed up 2 IMACs and one Mac Book Pro but for some reason, the 3rd IMAC come up with this problem: The backup disk image “/Volumes/Data/Anthony’s iMac.sparsebundle” could not be accessed (error -1). Why? The computer system is up to date and I have had no issue with the other computers, just this one.
Many thanks
AnthonyTry this Discussion...
https://discussions.apple.com/message/18783684#18783684
Maybe you are looking for
-
How do I get the songs from my old Mac to my new one sans iCloud?
I recently purchased a new MacBook Air and I need to know how to get the songs off of my 2007 MacBook onto my new one without use the iCloud.
-
HT5622 how do i remove my credit card information from my apple i.d permanently
i want to make sure its remove permanently from my account.
-
I am using af:table. In the af:columns I am using a h.Inputtext. Also I have placed one Edit af:command link in starting of every row. At first all the input fields are not editable.( ie I have set the readonly property to true). After click the Edit
-
Can I use icloud to share itunes audio files with others
Can I use i-cloud as a medium to share audio recordings stored in itunes, to share those recordings with others. How does that work if it's possible, is there a unique link provided to the one I am sharing the file with? Can I connect this link than
-
Doc flow linkage when adding a new line in a Billing order
Hi, I am trying to add a new line in an existing billing order using CRM_ORDER_MAINTAIN function module. This billing order was initially created from a preceding document and hence the pricing conditions flowed from that document to the line item cr