Scene Detect not functioning in Premiere Pro CS6

Hello all,
Having an issue with Scene Detect not recognizing individual scenes when I Capture HDV footage from my Canon XH series cameras. Tapes just come in as one long file rather than individual scenes. I am using CS6 on my MAC computers (OS 10.7.5 and 10.6.8).
This is baffling as I've captured many tapes from many weddings and have never experienced this problem to this point.
I did reset my cameras to default settings recently but can't seem to find anything that would indicate that causing the issue. However, it is the only change I have made unless a recent Adobe or OS update could have caused the issue?
Your help and knowledge are greatly appreciated!

Problem solved.
For anyone seeking a possible solution to this simple but incredibly aggravating issue: Make sure your camera's date and time fields are set. Premiere Pro's "Scene Detect" function uses your cameras time signature to differentiate scenes in your captured footage. No time code = no individual scene detection.
When I reset my camera to default settings I erased my time and date fields. I wasn't too worried about it as I typically use these cameras for their HD SDI capability with timecode captured via Tricaster, however this became a frustrating problem when I used the cameras for a recent wedding capture and I now have four long files rather than the intended multiple scenes I need for editing...
Hope this simple discovery makes someone's day a little easier...

Similar Messages

USB Mic not working in Premiere Pro CS6 for Mac

So I've been editing in Premiere Pro CS6 on a mac for 6 months now. I have to do a temp VO for a project and I thought I'd try the Narration feature in the mixer. For some reason my USB mic doesn't show up in the Audio Hardware so I can't pick it. The same mic shows up in the Mac Audio Settings and even shows up in Audition. I've been having to use Audition but was curious to see if anyone out there has gotten a USB mic to work in Premiere Pro on a Mac. Would be a really cool feature if it worked.
Greg Jones
D7,Inc.

Some USB mics work fine, but many do not. It can depend on the exact mic, or might require a different ASIO driver (maybe something like ASIO4All?), or different ASIO setting, to work.
Good luck,
Hunt

720p 120fps clip from GoPro Hero3 Black not recogniced by Premiere Pro CS6

Hello. My clip from Hero3 Black Gopro isn't recognized as a 120fps clip. I've read people saying that this is normal because premiere pro won't recognize them for anyone.. But it does, look at this clip:
http://youtu.be/YeHCUNH4KcM
At around second 30 it shows how it recognizes that the file is actually 120fps, in that same screen, I get that the file is 59,94fps and not 120fps and it really is.
What am I doing wrong?
Thank you.

I've created a few sample files for anyone interested. These files are straight from the camera.
Here is a 1280 x 720 at 60 fps: https://dl.dropbox.com/u/92935787/1280x720%2059fps.MP4
Here is a 1280 x 720 at 120 fps: https://dl.dropbox.com/u/92935787/1280x720%20119fps.MP4
Here is a 1280 x 960 at 100 fps: https://dl.dropbox.com/u/92935787/1280x960%20100fps.MP4
Import these into Premiere Pro CS6 or even Media Encoder CS6 or After Effects, have a look at the metadata and both of the 720p videos will show up as 60 (59.94) fps. I tried this in Premiere Pro CS5 and had the same result.

Warp Stabilization not working on Premiere Pro CS6 or After Effects CS6

I've imported a 30 second clip both on Premiere Pro and After Effects. I am using CS6. I used a Canon 600D and my footage is 23.976 and 24fps. I've tried both frames to see if it made a difference. All what happens is that it says step 1 out of 2. It finishes and tells me to analyze again. It doesn't actually make it to step 2 so my footage doesn't change and its getting frustrating. No idea what im doing wrong. HELP PLEASE?

As Rick says, it looks like you didn't update all of your software.
What version of Premiere did you have before?
What version of AE did you have before?
What version of Premiere do you have now?
What version of AE do you have now?
Exact version numbers down to the last decimal, please.
In the future, I'd suggest NOT updating in the middle of important projects.

Question: Has anyone lost multicam functionality in Premiere Pro CS6?

i've successfully done multicam sequences before but now when I try to create a multicam sequence from selected clips it does not offer "Audio" as a sync source (it's not greyed out, it's not there!)
Anyway, I marked some "In" points managed to create a multicam sequence using those. I then added that sequence to the timeline as a new sequence. All good but when I clicked the "settings" wrench in the program frame to enter "multicam mode" for a live cut, it wasn't there (multicam mode that is; all the other stuff was in the drop down menu - no room to insert an image of that in this post)

The features you're talking about are for Premiere Pro CC. CS6 doesn't have the Audio sync, and the multicam window is separate.

Speedgrade crashing and not roundtripping with Premiere Pro CS6 (NOT CC)

I am using Speedgrade CS6 (not CC). I have two questions. 1. When rendering my graded material to h.264 from Speedgrade, it crashes and the .mp4 that I get is choppy and incomplete. Also, a secondary issue is that I would like to edit in Premiere, color grade in Speedgrade and then roundtrip back to Premiere for editing and encoding. Is this possible? Please help!

Ask in the Prem/ SG forums. And just to point out an obvious flaw in your current workflow: Why would anyone render a sequence to a compressed format like H.264 after going out of the way to grade it for further editing? Makes no sense whatsoever, considering that once you edit it in Premiere and export it from there you add anorther pass of compression. Use DPX, TIFF, QT Animation or similar.
Mylenium

Prelude not sending to Premiere Pro CS6

Hi, I am running WIN7 and testing out the Prelude to PP workflow and not having very good luck.
Yesterday it seemed to allow me to right click, 'send to PP' and it would do that, today, NO.
I have tried the different routes, but all it does is open PP with no content....
other threads I searched didn't seem to provide a solution, any ideas?
Thanks!

Well, after screwing with it a little more without sucess, I have decided my workload at this point doesn't really need Prelude in the workflow... I find doing the cutting and sorting in PPro is just fine... perhaps if I end up editing larger projects, Prelude will make more sense at that time, and the problem with it losing roughcuts+clips between the two apps will be resolved by then.
Good Luck to anyone else experiencing the same issue, for now I'm unistalling Prelude.
Have a Great Weekend!

FAQ: What are the best resources for Premiere Pro CS6?

Here are high quality resources for troubleshooting and tutorials related to Premiere Pro CS6.
Premiere Pro CS6 troubleshooting articles
Issue: I'm having trouble downloading and installing Premiere Pro CS6. What do I do?Answer: See troubleshooting documents, post in the appropriate forum, or contact support.
More info: http://blogs.adobe.com/aftereffects/2013/09/troubleshooting-issues-with-downloading-and-in stalling-after-effects.html
Issue: What are the system requirements for Premiere Pro CS6?See this article: http://helpx.adobe.com/premiere-pro/system-requirements.html#Adobe%20Premiere%20Pro%20CS6% 20system%20requirements
Issue: Why won't Premiere Pro CS6 play back AVCHD media?Answer: Update to Premiere Pro CS6 (6.0.5). Previous versions of CS6 had this issue.
More info: http://blogs.adobe.com/premierepro/2013/08/premiere-pro-cs6-6-0-4-update.html
Issue: Does Premiere Pro CS6 work with OS X 10.9 (Mavericks)?Answer: Yes, make sure you update to Premiere Pro CS6 (6.0.5)
More info: http://blogs.adobe.com/premierepro/2013/10/premiere-pro-and-mac-os-x-10-9-mavericks.html
Issue: Is there a trial available for Premiere Pro CS6?Answer: Yes, subscribe to the free version of Creative Cloud, then download the trial.
Issue: I'm having unexpected behavior in Premiere Pro CS6 and want to trash preferences. How do I do that?Answer: See this blog post: http://blogs.adobe.com/genesisproject/2011/02/premiere-pro-cs5-maintenance-two-great-tips. html#more-537
Issue: I'm getting errors related to QuickTime. What do I do?Answer: See this blog post for troubleshooting items related to QuickTime: http://blogs.adobe.com/aftereffects/2011/02/troubleshooting-quicktime-errors-with-after-ef fects.html
Premiere Pro CS6 tutorials
Issue: I'm new to Premiere Pro CS6. How do I get started?Answer: See this blog post: http://blogs.adobe.com/kevinmonahan/2011/05/20/getting-started-with-adobe-premiere-pro-cs4 -cs5-cs5-5/
Issue: I'm switching to Premiere Pro CS6 from Final Cut Pro 7. Are there any tips for me?Answer: See this article by Scott Simmons on Pro Video Coalition: http://provideocoalition.com/ssimmons/story/105_adobe_premiere_pro_cs6_questions_answered
Issue: I just switched to Premiere Pro CS6 from Final Cut Pro 7. Are there any missing features between the applications?Answer: See this article: http://provideocoalition.com/ssimmons/story/10_fcp_things_fcp_editors_might_be_missing_in_ adobe_premiere_pro_cs6
Issue: Are there any good, free Premiere Pro CS6 tutorials available?Answer: See these tutorials: http://library.creativecow.net/series/Premiere-Pro-Basics-CS6--above-with-Andrew-Devis
Issue: How do I optimize Premiere Pro CS6 for best performance?Answer: See this article: https://www.video2brain.com/en/courses/after-effects-premiere-pro-performance-workshop
Issue: How do I operate the multicam function in Premiere Pro CS6?See this article: http://provideocoalition.com/ssimmons/story/working_with_multicam_in_adobe_premiere_pro_cs 6

Hi ..
GO to website www.Apache.org
down load Apache tomcat server .
install it ...
Go to sun site
c and download jsp tutorials ...
Go to
(www.coreservlets.com)download book core servlets
u can find lots of nice books supported by sun on sunwebsite ...
Now u r equipped ....
start doing everything (R &D) on server ..
Join This JSP forum and ask any thing u didnt got ..or learn or get confused..
I thing once u go through this ..it will do all what u want
Hope it helps
Best of Luck :)
regds & take care

Premiere Pro CS6 Error Message Codec Missing or unavailable?

I know there is already a thread about this... but I couldn't figure out how to add to that thread. I have been googling for like 2 hours and get this figured out! Sorry if this is a silly question, I am very new!
A videographer sent my company a hard drive with video footage he took from our event. I need to split these clips up and import them to Premiere Pro.
Here is all my info:
Premiere Pro 6.0.2 just updated about an hour ago-
Mac OS X 10.7.5
I am trying to import and edit footage a video-ographer gave my company from an event. He sent it to us on an external hard drive. I am not sure what kind of camera he used.
I have downloaded RedCode or whatever. Updated Premiere Pro.
The file type is .mov. It plays fine in Quick Time 10, but only the sound plays in Quick Time Pro 7.
The Codecs for this file are MPEG-2 AND LINEAR PCM, TIMECODE
I also need to split these clips into smaller clips before importing into Premiere Pro, the clips are all between 8-11GB, if you want to help me with that too.

I had the same issue after I re-installed both Mountain Lion and Adobe products. MOV (XDCAM) media was not reading on Premiere Pro CS6. "Codec Missing or Unavailable" kept prompting. Following ComputerNovice25 advice did not do the trick for this problem. But, I was able to fix issue by simply updating my OS. A ProApps Quicktime Codecs 1.0 was included in the update, which added the following video codecs for Quicktime-based applications:
Apple Intermediate Codec
Apple ProRes
AVC-Intra
DVCPRO HD
HDV
XDCAM HD / EX / HD422
MPEG IMX
Uncompressed 4:2:2
This update is highly recommended for all users running any MacOSX and any type of NLE.
Hope this helps.

Issue with importing H.264 files into Premiere Pro CS6

I have some AVI files that will not import into Premiere Pro CS6 (not trial version). The Gspot utility says they are H.264/MPEG-4 AVC format and that the codec is installed. I can see and play the files in Bridge but when I try to import it says “Unsupported format or damaged file”. I tried importing in CS5.5 and the file imported, however only the audio plays. Why is this happening and how can I import these files?

Premiere does not support H.264 in an avi.
You need to convert first.
See post 3: Can't get PPro to accept video file.

How to obtain Video and Non Video Serial Keys for Premiere Pro CS6

Discovered that certain codec presets (specifically the AVCHD codec) was not available for Premiere Pro CS6 installed under Creative Cloud for Enterprise.
Understand there are two different serial numbers for use in installation. One of these serial numbers is labeled "Video," and one is labeled "Non-Video.
Where are these serial numbers located? How are the serial numbers obtained?

Hello Ann,
Appreciate your reply..
Here is where some additional confusion arises (reference bottom part referring to Video Serial Keys) Adobe support said that these Video Keys are to be purchased from the reseller (which makes no sense)
Error "...a sequence that could not be opened"
So, if I understand from your replies and what I have read - it is of the belief that by de-activating and re-activating will address the issue of the missing codecs. Do you believe this to be correct as well?
Thank you

Can choose 5.1 in Audition CS6 for monitoring, but not in Premiere Pro CS6

System: Z820, Win 7 Ultimate x64
Audio: Creative SoundBlaster Recon3D PCIe, Altec Lansing 5.1 speaker system
SW: Master Collection CS6
I've been using Premiere Pro CS6 for a while now, but only for stereo video projects. I recently started working on a short film and needed 5.1 Surround Sound as well. I created a 5.1 surround track in Au, and have been able to monitor the sound and surround panning effects in Au during development. Here are the Audio and Channel Mapping settings I used to get my 5.1 to work so I could monitor it:
As can be seen, I've chosen the default MME Device Class here, and all seems well. I have 6 channels identified and mapped to the right corners. I've also confirmed my Master Track in Au is 5.1 Surround. I exported a 5.1 WAV and imported it into Pr, into a 5.1 surround session, confirming that both the track where the WAV file landed and the Master are both 6 channels (and although the order is displayed differently, the content correctly mapped from Au into Pr).
Now, my fun began. When I monitor the audio in Pr, I hear only Stereo. So, I check my channel mapping in Pr, as shown below:
As can be seen here as well, I've chosen the 'default' Premiere Pro WDM Sound. I've learned that WDM is a newer version of MME and encapsulates all the functionality of MME. I'm not sure why Au uses MME and Pr uses WDM. However, as shown, with WDM chosen, I only have 2 channels in the mapping dialog to work with, not the 6 I have (and had in Au). Nothing I can do will produce those other four channels.
As seen in the drop down captured in the above screen grab, I also have ASIO4ALL installed, but that too only shows 2 channels in both Pr and Au. Interestingly, when I hover the mouse over the speaker selection in the ASIO4ALL control panel, it only indicates there are 2 channels (but indicates that there are 6 INPUT channels). The Creative SBZ Series ASIO option is no better, providing only 2 channels.
So, I was off to check my system settings, which are all shown below:
As seen above, Windows knows there is 5.1 surround on the system, and the Test available in the bottom left dialog proves that each speaker is configured and working correctly. Audition also knows there is 5.1 available on my system and uses it correctly as described earlier. However, Pr refuses to recognize this and as a result I am unable to monitor any 5.1 surround projects on my system. If neither Au nor Pr worked, then I'd mark it down as Sound Card or Driver issues, but since one Adobe product uses the system audio correctly, and the other doesn't, it leads me to believe that it is Pr who is at fault.
So, my question is this: Why won't Pr recognize my 6 output channels like Au does?
Any advice would be appreciated.
Cheers,
Shane

ryclark, I believe you are correct in that Au uses MME while Pr uses WDM, but both MME and WDM (which, according to the Microsoft specification, encapsulates ALL of the MME capabilities, and expands on them) are 5.1 capable. I can play my export from Au as a 6 channel interleaved WAV file as well as an AC3 conversion of that same file in both VLC and Windows Media Player and get the same 5.1 channel surround sound field I do from Au.
After more research, I'm beginning to think this might be a result of the fact that Pr is 64 bit and Au is still 32 bit in CS5.5 and 6. I don't know if Au CC is 64 bit, but if it is, I'd be interested to know if what I am seeing is reproducible in the CC versions of Pr and Au (to eliminate the 64 bit vs 32 bit argument). Some have suggested that perhaps the standard SB driver is only 32 bit, although it 'supports' 64 bit supposedly, but maybe Pr just can't handle that 32 (faux 64) bit driver. A possibility.
Thanks for the read and response. Seems lots of people are in this boat together. You have recommended elsewhere to use an external audio interface, but just to do 5.1 monitoring (I don't do any live recording to my PC, this if for movie sound post/mixing) sounds pretty clunky. At the least, I think I'd need not only an external audio device with at least 6 channels out, but a receiver to take those outputs, and 6 new audio speakers to connect to that AVR. I currently use my computer's soundcard, as you know, and your standard 5.1 powered computer speaker system attached to that. Not the best, I know, but at this point, I'm just going for surround, but THX, so it is sufficient ;-).
Cheers,
Shane

Premiere Pro CS6 does not recognize USB PnP Sound device connected to iMac OSX even when activated in Audio MIDI setup. The iMac(i-7 processor,16 GB) is working with this USB device without any problem

Premiere Pro CS6 does not recognize the USB PnP Sound device in order to produce a commentary sound track. The USB device has been activated on the iMac OSX by using the Audio-MIDI-setup and is working correctly with the iMac. When opening > presets >audio hardware I can only select between >standard >out integrated > digital input integrated >microphone integrated. USB PnP is not indicated at this place.
With the built-in microphone of the iMac I can produce the commentary sound track, but I would prefer a stand alone version for better quality.
Your help is highly appreciated. Thanks in advance, Annemarie!

I'm using a Logitech Webcam Pro 9000 (which has a microphone on the side). I have several other devices plugged into separate USB slots: a keyboard, a mouse, my iPhone, and a Roland keyboard midi controller.
I've considered that maybe the webcam/mic combo is the culprit. If USB doesn't work at a constant speed, that could very well be causing the issue! The sound begins to lag badly sometimes when it's working properly, so that there's a multisecond delay between speaking and hearing my voice repeated back over the mic which is another sign that something is wrong. I've also caught it making a strange electronic sound during its "hang" time once it stops taking sound input correctly.
Maybe I should try to use line-in and forgo USB altogether then. I think I'd need a preamp and some sort of converter for that since the Mac Mini lacks a powered mic jack. I'm only a newbie musician so I've never set up such a system but it might be a better solution in the long run.
I'll check to see if it hangs before or after my computer enters suspend mode, that's a good suggestion too. Thank you for your help!

Adobe Premiere Pro CS6 classroom in a book lesson files "file format not supported" error message

Hey y'all. I have the creative Suite cloud membership and am learning Adobe Premiere Pro CS6 and have the latest update. I have an iMac, version 10.8.2 and have been going through the lessons 1-8 so far from the 'Adobe Premiere Pro CS6 Classroom in a book' with no problems. So far so good. Then, when I opened Lesson 9 project today, I realized that certain media was off line (see pic below-videos and maps) even though I had been able to open the project. I tried to see if it was a link issue but was unable to select the 'Link Media' option and the system did not give me the option to link media when opening a new project. The strange thing is that I am now able to open some lessons with everything working fine but when I try to open other lessons such as lesson 9 or 10 or 11 I notice media files offline after getting the "file format not supported" pop-up error message when attempting to open a project. It's random as some lessons I had opened previously now give this error message of file format not supported when they didn't in the past whilst others work. I have deleted all the lesson files from my hard drive and reinstalled them from the cd onto my hardrive but the issue persists. Any idea as to why all of a sudden Adobe Premiere Pro CS6 is giving the error message "File format not supported"??? when opening the lessons. I have not changed any preferences. I've included some screenshots though I don't know how much help they will be... Is anyone else running into this issue??? Can anyone help???
NEVERMIND. I FOUND OUT ON MY OWN WHAT THE ISSUE WAS AND IS NOW FIXED. YAY!

Why were you trying to link a file in the project to the project file itself? Shouldn't it be a video file or something? Like .mov .wav .avi .mp4 and not .prproj

Audio and video not synchronized when exporting from Premiere Pro CS6

Hi
We have made a project in Adobe Premiere Pro CS6 that´s intended to be exported to DVD (it´s a weeding). We are working with NTSC DV Widescreen. The exporting is 720x480
We have 2 audio lines activated and sounding on this project.
The question is:
When exporting the entire video (the entire timeline sequece) using Adobe Media Encoder to formats like H.264 (NTSC DV Widescreen)... Quick Tile Movie or AVI without compression (we tested these formats) the 2 audio channels get unsynchronized from the video. The same problem occurs if we get a direct link of the timeline from Premiere to Encore.
And Inside Premiere Preview audio is preety correct.
Does anyone here are getting such problem?
Also..can I ask another question (as I´m not expert on video production)?. What´s the best format for our purpose? Export a video to be played to DVD (we record weedings, birthdays..social events). No problem the time to export. We´d like the best quality for output.
Thank you for the help
Gustavo.

Hi John and techkid123
We have 4 cameras here. 1 is Sony model HD1000 (since it works with Mini-DV cassete we need to capture the image via Firewire). 2 cameras are Sony HD2000 (it generates *.MPEG files if I remember well). And 1 camera is a Panasonic AG-DVC7 (it generates *.MTS files)
We start a new project using the Standard NTSC Widescreen 48Khz format. When we drag to the timeline for example the MTS file...Premiere ask us if we want to Keep and Change timeline to suit the file specification. Anyway we always have 1 or 2 camera files that has a yellow line over timeline.
But I renders correct...no problem to edit...and we had no problem with Premiere CS5.5 :/
We are downloading the latest update of Premiere. I´ll make some test and publish here if the problem persist.
Thank you a lot for the help
Gustavo.

Scene Detect not functioning in Premiere Pro CS6

Similar Messages

Maybe you are looking for