SCEP 2012 Definition Updates for Linux machines thru SCCM

We have a situation where SCEP definition needs to be updated on Linux machines which don't have access to internet.
All I have read is that SCEP functions as stand alone for Linux & Mac machines. Can someone guide thru how do SCEP definitions get updated on Linux machines that are not connected to internet.

Pls check the below link
http://www.niallbrady.com/2013/02/22/how-can-i-deploy-system-center-2012-endpoint-protection-definition-updates-from-a-unc-file-shares/
Thanks, Prabha G

Similar Messages

  • SCEP 2012 definition updates makes no sense

    Hi, i´m trying to figure out how SCEP updates are working, we are evaluating SCEP on some servers and workstations at the moment and some clients have the latest updates, some have one version old, and som have even older.
    For example.
    This morning at 04:00 we had an SUP sync and a ADR was created at 04:02 with definition version 1.169.1999.0.
    Today at 10:27 one of the clients updated its definition, but to version 1.169.1904.0. Why did it choose an old update? Several clients had already updated to the .1999 version. And why so late? Our antimalware policy is set to check for updates every 1 hour.
    The computer powered on at 07:45.
    I have looked in the MPlog.log file, but it doesnt make sense either, according to one machine it updated to definition v.1.169.1258.0 mars 31. it is the latest record, but when i check SCEP gui on that machine it have updated to 1.169.2028.0 today.
    What am i missing?
    Regards Erik

    1: And with this configuration all your clients gets all definitions that MS releases during a day?
    It looks to me with that config that you will only get definitions that releases before 5AM and then if it arrives 2 more definitions that day you will not recieve them until the next day. is that correct?
    2&3: Yeah, i need to do more trouble shooting, yesterday before I went home i made sure that we used Client Notification and that the FW port was open. I set antimalware policy to: update interval: 0. Two sources (configmgr and ms update). Daily update
    check at 12 AM. And force to look outside ConfigMgr if no definitions have come within 24 hours from the last update.
    It still goes outside to update definitions from MS Update.
    I have now set "If ConfigMgr is used as a source for definition updates, clients will only update form alternative source if a definition is older than _ hours" to 720, so hopefully it will start getting updates from only ConfigMgr so i see that it
    works.
    5: The SCEP ADR is targeted to a collection that includes two other collections.
    Client collection: A query that gets all windows 8.1 workstations.
    Server collection: A query that gets group membership from Active Directory
    6: One more thing, how is it about multiple antimalware policys? we have the default policy at order 10000 and then we have an others at order 1 and 2. For server the default and the one at order 2 active. both have different definition updates entries, but
    the one i want to win is in the policy with order 2. the policy with order 2 will always win, right?

  • SCEP 2012 manual definitions update for use in OSD

    So I am setting up to deploy SCEP 2012 4.5.0216.0 during my OSD task sequence. I am following the guidelines laid out by the blog post: 
    http://blogs.technet.com/b/configmgrteam/archive/2012/04/12/operating-system-deployment-and-endpoint-protection-client-installation.aspx.  I have created a package with the scepinstall.exe, EPAMPolicy.xml, and Install.cmd. 
    Note:  I got the EPAMPolicy.xml from a client I let install SCEP the "normal way" by deploying client settings that said to install and manage the client. 
    I added to the EPAMPolicy.xml file:
    <AddValue Name="DisableUpdateOnStartupWithoutEngine" Disabled="false" Type="REG_DWORD">1</AddValue>
    Added it between:
    <AddValue Name="AuGracePeriod" Type="REG_DWORD" Disabled="false">4320</AddValue>"I ADDED THE CODE RIGHT HERE"<AddValue Name="SignatureUpdateInterval" Type="REG_DWORD" Disabled="false">8</AddValue>
    The "Install.cmd" contains:
    "%~dp0scepinstall.exe" /s /q /NoSigsUpdateAtInitialExp /policy "%~dp0EPAMPolicy.xml"
    So these things together install SCEP 2012 version 4.5.0216.0 and
    cancels any definition updates when done installing and when the service first starts up.  When the install finishes the client is RED since I cancelled all updates.  This is WORKING FINE.
    Now I have a package that contains the definition updates "mpam-fe.exe" and "nis_full.exe" as described in the linked blog.  Running the proper 32/64 version of the mpam-fe.exe effectively updates the client Anti-malware definitions
    to the version I have downloaded for that day.  The client now turns GREEN.  This is WORKING FINE.
    The part that is not working is running the Network Inspection Service definitions, "nis_full.exe".  It goes right through like it was fine when run manually, but when you check event log you see it put two errors in Event
    Log.  It also is causing my Task Sequence to fail.
    I questioned how valid the nis_full.exe was anymore since the blog post is not real new...so I found: 
    http://support.microsoft.com/kb/935934.  It is titled, "How to manually download the latest antimalware definition updates for Microsoft Forefront Client Security, Microsoft Forefront Endpoint
    Protection 2010 and Microsoft System Center 2012 Endpoint Protection".  I verified by downloading using the links given in that article that my files matched hash for hash. 
    In that article it does say if running SCEP 2012 to also install the nis_full.exe as administrator. 
    This is not working!
    Any assistance is appreciated.  Any better way to deploy SCEP during task sequence and definitions WITHOUT scanning for updates during "Install Software Updates" task or letting client go to
    internet?
    Find this post helpful? Does this post answer your question? Be sure to mark it appropriately to help others find answers to their searches.

    Using the supplied EPAMPolicy2.xml did not resolve the issue. I still get an "0x80004005" error when I try to deploy the "nis_full.exe" during my task sequence. The client and malware definitions work as intended and install successfully. The NIS definitions
    fail though.
    Snippet of my SMSTS.LOG:
    <![LOG[!--------------------------------------------------------------------------------------------!]LOG]!><time="09:37:58.886+240" date="05-30-2014" component="TSManager" context="" type="1" thread="540" file="instruction.cxx:804">
    <![LOG[Successfully completed the action (Install SCEP 2012 Anti-malware Defs) with the exit win32 code 0]LOG]!><time="09:37:58.886+240" date="05-30-2014" component="TSManager" context="" type="1" thread="540" file="instruction.cxx:830">
    <![LOG[MP server https://SCCMSRV.domain.local. Ports 80,443. CRL=false.]LOG]!><time="09:37:58.886+240" date="05-30-2014" component="TSManager" context="" type="1" thread="540" file="utils.cpp:5881">
    <![LOG[Setting authenticator]LOG]!><time="09:37:58.901+240" date="05-30-2014" component="TSManager" context="" type="1" thread="540" file="utils.cpp:5903">
    <![LOG[Set authenticator in transport]LOG]!><time="09:37:58.901+240" date="05-30-2014" component="TSManager" context="" type="0" thread="540" file="libsmsmessaging.cpp:7734">
    <![LOG[Sending StatusMessage]LOG]!><time="09:37:58.917+240" date="05-30-2014" component="TSManager" context="" type="1" thread="540" file="libsmsmessaging.cpp:4023">
    <![LOG[Setting message signatures.]LOG]!><time="09:37:58.932+240" date="05-30-2014" component="TSManager" context="" type="0" thread="540" file="libsmsmessaging.cpp:1295">
    <![LOG[Setting the authenticator.]LOG]!><time="09:37:58.932+240" date="05-30-2014" component="TSManager" context="" type="0" thread="540" file="libsmsmessaging.cpp:1325">
    <![LOG[CLibSMSMessageWinHttpTransport::Send: URL: SCCMSRV.domain.local:443 CCM_POST /ccm_system_AltAuth/request]LOG]!><time="09:37:58.932+240" date="05-30-2014" component="TSManager" context="" type="1" thread="540" file="libsmsmessaging.cpp:8604">
    <![LOG[In SSL, but with no client cert]LOG]!><time="09:37:58.932+240" date="05-30-2014" component="TSManager" context="" type="1" thread="540" file="libsmsmessaging.cpp:8738">
    <![LOG[Request was successful.]LOG]!><time="09:37:58.964+240" date="05-30-2014" component="TSManager" context="" type="0" thread="540" file="libsmsmessaging.cpp:8939">
    <![LOG[Set a global environment variable _SMSTSLastActionRetCode=0]LOG]!><time="09:37:58.964+240" date="05-30-2014" component="TSManager" context="" type="0" thread="540" file="executionenv.cxx:668">
    <![LOG[Set a global environment variable _SMSTSLastActionSucceeded=true]LOG]!><time="09:37:58.964+240" date="05-30-2014" component="TSManager" context="" type="0" thread="540" file="executionenv.cxx:668">
    <![LOG[Clear local default environment]LOG]!><time="09:37:58.964+240" date="05-30-2014" component="TSManager" context="" type="0" thread="540" file="executionenv.cxx:807">
    <![LOG[Updated security on object C:\_SMSTaskSequence.]LOG]!><time="09:37:59.026+240" date="05-30-2014" component="TSManager" context="" type="1" thread="540" file="utils.cpp:1704">
    <![LOG[Set a global environment variable _SMSTSNextInstructionPointer=15]LOG]!><time="09:37:59.026+240" date="05-30-2014" component="TSManager" context="" type="0" thread="540" file="executionenv.cxx:668">
    <![LOG[Set a TS execution environment variable _SMSTSNextInstructionPointer=15]LOG]!><time="09:37:59.026+240" date="05-30-2014" component="TSManager" context="" type="0" thread="540" file="executionenv.cxx:386">
    <![LOG[Set a global environment variable _SMSTSInstructionStackString=10 12]LOG]!><time="09:37:59.026+240" date="05-30-2014" component="TSManager" context="" type="0" thread="540" file="executionenv.cxx:668">
    <![LOG[Set a TS execution environment variable _SMSTSInstructionStackString=10 12]LOG]!><time="09:37:59.026+240" date="05-30-2014" component="TSManager" context="" type="0" thread="540" file="executionenv.cxx:414">
    <![LOG[Save the current environment block]LOG]!><time="09:37:59.026+240" date="05-30-2014" component="TSManager" context="" type="0" thread="540" file="executionenv.cxx:833">
    <![LOG[Successfully save execution state and environment to local hard disk]LOG]!><time="09:37:59.182+240" date="05-30-2014" component="TSManager" context="" type="1" thread="540" file="engine.cxx:254">
    <![LOG[Start executing an instruction. Instruction name: Install SCEP 2012 NIS Defs. Instruction pointer: 15]LOG]!><time="09:37:59.182+240" date="05-30-2014" component="TSManager" context="" type="1" thread="540" file="engine.cxx:116">
    <![LOG[Set a global environment variable _SMSTSCurrentActionName=Install SCEP 2012 NIS Defs]LOG]!><time="09:37:59.182+240" date="05-30-2014" component="TSManager" context="" type="0" thread="540" file="executionenv.cxx:668">
    <![LOG[Set a global environment variable _SMSTSNextInstructionPointer=15]LOG]!><time="09:37:59.182+240" date="05-30-2014" component="TSManager" context="" type="0" thread="540" file="executionenv.cxx:668">
    <![LOG[Set a local default variable _SMSSWDProgramName]LOG]!><time="09:37:59.197+240" date="05-30-2014" component="TSManager" context="" type="0" thread="540" file="executionenv.cxx:700">
    <![LOG[Set a global environment variable _SMSTSLogPath=C:\Windows\CCM\Logs\SMSTSLog]LOG]!><time="09:37:59.197+240" date="05-30-2014" component="TSManager" context="" type="0" thread="540" file="executionenv.cxx:668">
    <![LOG[Expand a string: smsswd.exe /pkg:PR100043 /install /basevar: /continueOnError:]LOG]!><time="09:37:59.197+240" date="05-30-2014" component="TSManager" context="" type="0" thread="540" file="executionenv.cxx:782">
    <![LOG[Expand a string: ]LOG]!><time="09:37:59.197+240" date="05-30-2014" component="TSManager" context="" type="0" thread="540" file="executionenv.cxx:782">
    <![LOG[Command line for extension .exe is "%1" %*]LOG]!><time="09:37:59.197+240" date="05-30-2014" component="TSManager" context="" type="0" thread="540" file="commandline.cpp:228">
    <![LOG[Set command line: smsswd.exe /pkg:PR100043 /install /basevar: /continueOnError:]LOG]!><time="09:37:59.197+240" date="05-30-2014" component="TSManager" context="" type="0" thread="540" file="commandline.cpp:731">
    <![LOG[Start executing the command line: smsswd.exe /pkg:PR100043 /install /basevar: /continueOnError:]LOG]!><time="09:37:59.197+240" date="05-30-2014" component="TSManager" context="" type="1" thread="540" file="instruction.cxx:722">
    <![LOG[!--------------------------------------------------------------------------------------------!]LOG]!><time="09:37:59.197+240" date="05-30-2014" component="TSManager" context="" type="1" thread="540" file="instruction.cxx:751">
    <![LOG[Expand a string: FullOS]LOG]!><time="09:37:59.197+240" date="05-30-2014" component="TSManager" context="" type="0" thread="540" file="executionenv.cxx:782">
    <![LOG[Executing command line: smsswd.exe /pkg:PR100043 /install /basevar: /continueOnError:]LOG]!><time="09:37:59.197+240" date="05-30-2014" component="TSManager" context="" type="1" thread="540" file="commandline.cpp:827">
    <![LOG[[ smsswd.exe ]]LOG]!><time="09:37:59.587+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="main.cpp:289">
    <![LOG[PackageID = 'PR100043']LOG]!><time="09:37:59.618+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="main.cpp:318">
    <![LOG[BaseVar = '', ContinueOnError='']LOG]!><time="09:37:59.618+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="main.cpp:319">
    <![LOG[ProgramName = 'Install NIS Definitions']LOG]!><time="09:37:59.618+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="main.cpp:320">
    <![LOG[SwdAction = '0002']LOG]!><time="09:37:59.618+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="main.cpp:321">
    <![LOG[GetExecRequestMgrInterface successful]LOG]!><time="09:37:59.650+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="installsoftware.cpp:187">
    <![LOG[Retrieving value from TSEnv for '_SMSTSPolicyPR100043_Install NIS Definitions']LOG]!><time="09:37:59.650+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="installsoftware.cpp:85">
    <![LOG[::DecompressBuffer(65536)]LOG]!><time="09:37:59.650+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="ccmzlib.cpp:739">
    <![LOG[Decompression (zlib) succeeded: original size 3059, uncompressed size 39008.]LOG]!><time="09:37:59.650+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="ccmzlib.cpp:651">
    <![LOG[ADV_AdvertisementID=PR120019]LOG]!><time="09:37:59.712+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="installsoftware.cpp:1151">
    <![LOG[PKG_PSF_ContainsSourceFiles=TRUE]LOG]!><time="09:37:59.712+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="installsoftware.cpp:1170">
    <![LOG[ResolveSource flags: 0x00000000]LOG]!><time="09:37:59.712+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="resolvesource.cpp:3201">
    <![LOG[SMSTSPersistContent: . The content for package PR100043 will be persisted]LOG]!><time="09:37:59.712+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="resolvesource.cpp:3212">
    <![LOG[The package PR100043 is found locally in the cache C:\_SMSTaskSequence\Packages\PR100043]LOG]!><time="09:37:59.712+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="resolvesource.cpp:3242">
    <![LOG[SMS PkgID 'PR100043' resolved to location 'C:\_SMSTaskSequence\Packages\PR100043']LOG]!><time="09:37:59.712+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="installsoftware.cpp:145">
    <![LOG[Start to compile TS policy]LOG]!><time="09:37:59.712+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="utils.cpp:3066">
    <![LOG[Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace]LOG]!><time="09:37:59.837+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="utils.cpp:3167">
    <![LOG[End TS policy compilation]LOG]!><time="09:37:59.837+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="utils.cpp:3171">
    <![LOG[getPointer()->ExecQuery( BString(L"WQL"), BString(pszQuery), lFlags, pContext, ppEnum ), HRESULT=80041017 (e:\nts_sccm_release\sms\framework\core\ccmcore\wminamespace.cpp,463)]LOG]!><time="09:37:59.837+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="wminamespace.cpp:463">
    <![LOG[Failed to query CCM_SoftwareDistribution]LOG]!><time="09:37:59.837+240" date="05-30-2014" component="InstallSoftware" context="" type="2" thread="2136" file="installsoftware.cpp:729">
    <![LOG[Get Install Directory for SMS Client]LOG]!><time="09:37:59.837+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="utils.cpp:4215">
    <![LOG[Start to evaluate TS policy with lock]LOG]!><time="09:38:00.024+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="policyutil.cpp:10966">
    <![LOG[Locked policy transaction lock successfully]LOG]!><time="09:38:00.039+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="policyutil.cpp:8021">
    <![LOG[Updating settings in \\.\root\ccm\policy\machine\actualconfig]LOG]!><time="09:38:00.039+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="policyutil.cpp:8024">
    <![LOG[RequestedConfig policy instance(s) : 437]LOG]!><time="09:38:00.086+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="policyutil.cpp:7653">
    <![LOG[Locked \\.\ROOT\ccm\Policy\Machine\RequestedConfig for source SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D} successfully]LOG]!><time="09:38:00.086+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="policyutil.cpp:7463">
    <![LOG[Namespace: \\.\ROOT\ccm\Policy\Machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D}") AND (PolicyState = "Active") AND (PolicyType = "Machine")]LOG]!><time="09:38:00.086+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="policyutil.cpp:7511">
    <![LOG[There is no ccm_policy_policy instance, skipping addition to realinst map]LOG]!><time="09:38:00.086+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="policyutil.cpp:7512">
    <![LOG[Unlocked \\.\ROOT\ccm\Policy\Machine\RequestedConfig for source SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D} successfully]LOG]!><time="09:38:00.086+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="policyutil.cpp:7660">
    <![LOG[RequestedConfig policy instance(s) : 0]LOG]!><time="09:38:00.102+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="policyutil.cpp:7653">
    <![LOG[Locked \\.\ROOT\ccm\Policy\Machine\RequestedConfig for source SMS:PR1 successfully]LOG]!><time="09:38:00.102+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="policyutil.cpp:7463">
    <![LOG[Namespace: \\.\ROOT\ccm\Policy\Machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:PR1") AND (PolicyState = "Active") AND (PolicyType = "Machine")]LOG]!><time="09:38:00.102+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="policyutil.cpp:7511">
    <![LOG[There is no ccm_policy_policy instance, skipping addition to realinst map]LOG]!><time="09:38:00.102+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="policyutil.cpp:7512">
    <![LOG[Unlocked \\.\ROOT\ccm\Policy\Machine\RequestedConfig for source SMS:PR1 successfully]LOG]!><time="09:38:00.102+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="policyutil.cpp:7660">
    <![LOG[RequestedConfig policy instance(s) : 0]LOG]!><time="09:38:00.102+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="policyutil.cpp:7653">
    <![LOG[Locked \\.\ROOT\ccm\Policy\Machine\RequestedConfig for source CcmPortal successfully]LOG]!><time="09:38:00.102+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="policyutil.cpp:7463">
    <![LOG[Namespace: \\.\ROOT\ccm\Policy\Machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmPortal") AND (PolicyState = "Active") AND (PolicyType = "Machine")]LOG]!><time="09:38:00.102+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="policyutil.cpp:7511">
    <![LOG[There is no ccm_policy_policy instance, skipping addition to realinst map]LOG]!><time="09:38:00.102+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="policyutil.cpp:7512">
    <![LOG[Unlocked \\.\ROOT\ccm\Policy\Machine\RequestedConfig for source CcmPortal successfully]LOG]!><time="09:38:00.102+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="policyutil.cpp:7660">
    <![LOG[RequestedConfig policy instance(s) : 0]LOG]!><time="09:38:00.117+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="policyutil.cpp:7653">
    <![LOG[Locked \\.\ROOT\ccm\Policy\Machine\RequestedConfig for source Local successfully]LOG]!><time="09:38:00.117+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="policyutil.cpp:7463">
    <![LOG[RequestedConfig policy instance(s) : 9]LOG]!><time="09:38:00.117+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="policyutil.cpp:7653">
    <![LOG[Unlocked \\.\ROOT\ccm\Policy\Machine\RequestedConfig for source Local successfully]LOG]!><time="09:38:00.117+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="policyutil.cpp:7660">
    <![LOG[RequestedConfig policy instance(s) : 15]LOG]!><time="09:38:00.133+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="policyutil.cpp:7653">
    <![LOG[Locked \\.\ROOT\ccm\Policy\Machine\RequestedConfig for source CcmTaskSequence successfully]LOG]!><time="09:38:00.133+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="policyutil.cpp:7463">
    <![LOG[Namespace: \\.\ROOT\ccm\Policy\Machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmTaskSequence") AND (PolicyState = "Active") AND (PolicyType = "Machine")]LOG]!><time="09:38:00.258+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="policyutil.cpp:7511">
    <![LOG[There is no ccm_policy_policy instance, skipping addition to realinst map]LOG]!><time="09:38:00.258+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="policyutil.cpp:7512">
    <![LOG[Unlocked \\.\ROOT\ccm\Policy\Machine\RequestedConfig for source CcmTaskSequence successfully]LOG]!><time="09:38:00.258+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="policyutil.cpp:7660">
    <![LOG[Total RequestedConfig policy instance(s) : 461]LOG]!><time="09:38:00.336+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="policyutil.cpp:8186">
    <![LOG[Locked ActualConfig successfully]LOG]!><time="09:38:00.336+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="policyutil.cpp:8199">
    <![LOG[New/Changed ActualConfig policy instance(s) : 1]LOG]!><time="09:38:00.382+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="policyutil.cpp:8278">
    <![LOG[[1] Added/updated setting 'ccm_softwaredistribution:adv_advertisementid=it120019:pkg_packageid=it100043:prg_programid=install nis definitions'.]LOG]!><time="09:38:00.382+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="policyutil.cpp:8307">
    <![LOG[Unlocked ActualConfig successfully]LOG]!><time="09:38:00.382+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="policyutil.cpp:8333">
    <![LOG[Unlocked policy transaction lock successfully]LOG]!><time="09:38:00.382+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="policyutil.cpp:8339">
    <![LOG[Raising event:
    instance of CCM_PolicyAgent_SettingsEvaluationComplete
    ClientID = "GUID:d69a4ca6-a93a-479d-89aa-c85113eaef67";
    DateTime = "20140530133800.382000+000";
    PolicyNamespace = "\\\\.\\root\\ccm\\policy\\machine\\actualconfig";
    ProcessID = 1084;
    ThreadID = 2136;
    ]LOG]!><time="09:38:00.382+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="event.cpp:715">
    <![LOG[Successfully submitted event to the Status Agent.]LOG]!><time="09:38:00.398+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="event.cpp:733">
    <![LOG[End TS policy evaluation]LOG]!><time="09:38:00.398+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="policyutil.cpp:10969">
    <![LOG[Policy evaluation initiated]LOG]!><time="09:38:00.398+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="utils.cpp:4253">
    <![LOG[Waiting for policy to be compiled in 'root\ccm\policy\machine' namespace ]LOG]!><time="09:38:00.398+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="installsoftware.cpp:383">
    <![LOG[Query path = 'CCM_SoftwareDistribution.ADV_AdvertisementID="PR120019",PRG_ProgramID="Install NIS Definitions",PKG_PackageID="PR100043"']LOG]!><time="09:38:00.398+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="installsoftware.cpp:414">
    <![LOG[Verified policy is compiled in 'root\ccm\policy\machine' namespace]LOG]!><time="09:38:00.445+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="installsoftware.cpp:439">
    <![LOG[content location count = 1]LOG]!><time="09:38:00.507+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="installsoftware.cpp:231">
    <![LOG[Checking if the active request handle: {66096B8A-60B8-4CC3-ABBA-D0CD624938C4} is valid.]LOG]!><time="09:38:00.507+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="utils.cpp:5052">
    <![LOG[CoCreateInstance succeeded]LOG]!><time="09:38:00.507+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="utils.cpp:5074">
    <![LOG[Active request handle: {66096B8A-60B8-4CC3-ABBA-D0CD624938C4} is valid.]LOG]!><time="09:38:00.507+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="utils.cpp:5082">
    <![LOG[Invoking Execution Manager to install software ]LOG]!><time="09:38:00.507+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="installsoftware.cpp:246">
    <![LOG[Installing software for PackageID='PR100043' ProgramID='Install NIS Definitions' AdvertID='PR120019' has started, jobID='{F528EBD4-1270-44E5-9539-5B5346BAE5A4}']LOG]!><time="09:38:00.803+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="installsoftware.cpp:268">
    <![LOG[Setting TSEnv variable 'SMSTSInstallSoftwareJobID_PR100043_PR120019_Install NIS Definitions'='{F528EBD4-1270-44E5-9539-5B5346BAE5A4}']LOG]!><time="09:38:00.803+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="installsoftware.cpp:52">
    <![LOG[Waiting for installation job to complete..]LOG]!><time="09:38:00.803+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="installsoftware.cpp:873">
    <![LOG[CompleteExecution received]LOG]!><time="09:38:03.033+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="1524" file="installsoftware.cpp:580">
    <![LOG[CompleteExecution processed]LOG]!><time="09:38:03.033+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="1524" file="installsoftware.cpp:593">
    <![LOG[Received job completion notification from Execution Manager]LOG]!><time="09:38:03.033+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="installsoftware.cpp:923">
    <![LOG[Installation completed with exit code 0x80004005]LOG]!><time="09:38:03.033+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="installsoftware.cpp:940">
    <![LOG[Installation failed with error (0x80004005)]LOG]!><time="09:38:03.033+240" date="05-30-2014" component="InstallSoftware" context="" type="3" thread="2136" file="installsoftware.cpp:967">
    <![LOG[Setting TSEnv variable 'SMSTSInstallSoftwareJobID_PR100043_PR120019_Install NIS Definitions'='']LOG]!><time="09:38:03.033+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="installsoftware.cpp:52">
    <![LOG[GetExecRequestMgrInterface successful]LOG]!><time="09:38:03.033+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="installsoftware.cpp:187">
    <![LOG[Releasing job request, jobID='{F528EBD4-1270-44E5-9539-5B5346BAE5A4}']LOG]!><time="09:38:03.033+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="installsoftware.cpp:339">
    <![LOG[Releasing of Job Request successful]LOG]!><time="09:38:03.033+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="installsoftware.cpp:348">
    <![LOG[CompleteJob successful]LOG]!><time="09:38:03.033+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="installsoftware.cpp:997">
    <![LOG[ReleaseSource() for C:\_SMSTaskSequence\Packages\PR100043.]LOG]!><time="09:38:03.033+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="resolvesource.cpp:3564">
    <![LOG[reference count 1 for the source C:\_SMSTaskSequence\Packages\PR100043 before releasing]LOG]!><time="09:38:03.033+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="resolvesource.cpp:3574">
    <![LOG[Released the resolved source C:\_SMSTaskSequence\Packages\PR100043]LOG]!><time="09:38:03.033+240" date="05-30-2014" component="InstallSoftware" context="" type="1" thread="2136" file="resolvesource.cpp:3612">
    <![LOG[pInstall->Install(sPackageID, sProgramName), HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\installsoftware\main.cpp,361)]LOG]!><time="09:38:03.033+240" date="05-30-2014" component="InstallSoftware" context="" type="0" thread="2136" file="main.cpp:361">
    <![LOG[Install Software failed, hr=0x80004005]LOG]!><time="09:38:03.033+240" date="05-30-2014" component="InstallSoftware" context="" type="3" thread="2136" file="main.cpp:361">
    <![LOG[Process completed with exit code 2147500037]LOG]!><time="09:38:03.049+240" date="05-30-2014" component="TSManager" context="" type="1" thread="540" file="commandline.cpp:1123">
    <![LOG[!--------------------------------------------------------------------------------------------!]LOG]!><time="09:38:03.049+240" date="05-30-2014" component="TSManager" context="" type="1" thread="540" file="instruction.cxx:804">
    <![LOG[Failed to run the action: Install SCEP 2012 NIS Defs.
    Unspecified error (Error: 80004005; Source: Windows)]LOG]!><time="09:38:03.049+240" date="05-30-2014" component="TSManager" context="" type="3" thread="540" file="instruction.cxx:895">
    <![LOG[MP server https://SCCMSRV.domain.local. Ports 80,443. CRL=false.]LOG]!><time="09:38:03.049+240" date="05-30-2014" component="TSManager" context="" type="1" thread="540" file="utils.cpp:5881">
    <![LOG[Setting authenticator]LOG]!><time="09:38:03.064+240" date="05-30-2014" component="TSManager" context="" type="1" thread="540" file="utils.cpp:5903">
    <![LOG[Set authenticator in transport]LOG]!><time="09:38:03.064+240" date="05-30-2014" component="TSManager" context="" type="0" thread="540" file="libsmsmessaging.cpp:7734">
    <![LOG[Sending StatusMessage]LOG]!><time="09:38:03.080+240" date="05-30-2014" component="TSManager" context="" type="1" thread="540" file="libsmsmessaging.cpp:4023">
    <![LOG[Setting message signatures.]LOG]!><time="09:38:03.096+240" date="05-30-2014" component="TSManager" context="" type="0" thread="540" file="libsmsmessaging.cpp:1295">
    <![LOG[Setting the authenticator.]LOG]!><time="09:38:03.096+240" date="05-30-2014" component="TSManager" context="" type="0" thread="540" file="libsmsmessaging.cpp:1325">
    <![LOG[CLibSMSMessageWinHttpTransport::Send: URL: SCCMSRV.domain.local:443 CCM_POST /ccm_system_AltAuth/request]LOG]!><time="09:38:03.096+240" date="05-30-2014" component="TSManager" context="" type="1" thread="540" file="libsmsmessaging.cpp:8604">
    <![LOG[In SSL, but with no client cert]LOG]!><time="09:38:03.096+240" date="05-30-2014" component="TSManager" context="" type="1" thread="540" file="libsmsmessaging.cpp:8738">
    <![LOG[Request was successful.]LOG]!><time="09:38:03.111+240" date="05-30-2014" component="TSManager" context="" type="0" thread="540" file="libsmsmessaging.cpp:8939">
    <![LOG[Set a global environment variable _SMSTSLastActionRetCode=-2147467259]LOG]!><time="09:38:03.111+240" date="05-30-2014" component="TSManager" context="" type="0" thread="540" file="executionenv.cxx:668">
    <![LOG[Set a global environment variable _SMSTSLastActionSucceeded=false]LOG]!><time="09:38:03.111+240" date="05-30-2014" component="TSManager" context="" type="0" thread="540" file="executionenv.cxx:668">
    <![LOG[Clear local default environment]LOG]!><time="09:38:03.111+240" date="05-30-2014" component="TSManager" context="" type="0" thread="540" file="executionenv.cxx:807">
    <![LOG[Let the parent group (Install Endpoint Protection) decides whether to continue execution]LOG]!><time="09:38:03.111+240" date="05-30-2014" component="TSManager" context="" type="0" thread="540" file="instruction.cxx:1004">
    <![LOG[Let the parent group (Setup Operating System) decide whether to continue execution]LOG]!><time="09:38:03.111+240" date="05-30-2014" component="TSManager" context="" type="0" thread="540" file="instruction.cxx:254">
    <![LOG[The execution of the group (Setup Operating System) has failed and the execution has been aborted. An action failed.
    Operation aborted (Error: 80004004; Source: Windows)]LOG]!><time="09:38:03.111+240" date="05-30-2014" component="TSManager" context="" type="3" thread="540" file="instruction.cxx:217">
    <![LOG[Failed to run the last action: Install SCEP 2012 NIS Defs. Execution of task sequence failed.
    Unspecified error (Error: 80004005; Source: Windows)]LOG]!><time="09:38:03.111+240" date="05-30-2014" component="TSManager" context="" type="3" thread="540" file="engine.cxx:213">
    Find this post helpful? Does this post answer your question? Be sure to mark it appropriately to help others find answers to their searches.

  • SCEP 2012 Definitions only updating 50% of servers

    Hiya,
    We have SCCM 2012 R2 installed with a SUP and use an ADR to deliver Definitions 3 times a day. We're gradually migrating servers from our existing WSUS infrastructure to SCCM for monthly patching/AV defs.
    Since 27.04.14 about half the servers (around 200) have failed to update their AV definitions and are stuck on version 1.173.658.0 (the majority, but not all). I've been comparing servers with up to date defs and those without but I can't see why they're
    not working. In C:\Windows\CCMcache I just see a folder created for 28.04.14 for the next def but no file in there.
    The non-working servers have;
    1. The same AM policies applied
    2. The same client settings applied
    3. They're in the same site/use same DP
    4. The same SCEP version (4.3.220.0)
    5. The same SCCM client (5.00.7958.1000 - SP2 client)
    6. Checked they're in the collection the ADR applies to
    7. Log files show they're pointing to SCCM server and have same GPO settings as working servers
    8. WUAgent is the same version
    I've trawled through the SCCM client logs, used MpCmdRun.exe
    -getfiles and looked through those but can't see any errors.
    Of note, the WUAHandler.log shows the last update getting installed but then subsequent scans run, complete and there are no further "Update (Missing): Definition Update for Microsoft Endpoint Protection" entries.
    Any help gratefully received!
    Thanks

    Ok still no joy unfortunately.
    Checked the CAS/ContentAccess/ContentTransferManager/DataTransferService logs on an updated server and non-updated server and the only difference I see is this on the non-updated server;
    DataTransferService.log
    QUEUE: Error restarting queued DTS job {0A28D485-63C0-4C43-B942-7ECD4BFAE938}. Code 0x87d00215
    QUEUE: Error evaluating DTS job queue. Code 0x87d00215
    Error sending callback notification for DTS job {76FF03FC-D576-4F1D-9F6E-0EB7F187A2B7}
    Comparing the WUAHandler.logs shows below;
    Working;
    Successfully completed synchronous searching of updates.
    1. Update: 0a5fbcd9-e403-44cd-9fd0-38a2a942d394, 200 BundledUpdates: 1
    Update: fa5965dd-4c94-4564-982b-6d1d1dd6e688, 200 BundledUpdates: 0
    1. Update (Missing): Definition Update for Microsoft Endpoint Protection - KB2461484 (Definition 1.173.646.0) (0a5fbcd9-e403-44cd-9fd0-38a2a942d394, 200)
    Async installation of updates started.
    Update 1 (0a5fbcd9-e403-44cd-9fd0-38a2a942d394) finished installing (0x00000000), Reboot Required? No
    Async install completed.
    Installation of updates completed.
    Non-working;
    Successfully completed synchronous searching of updates.
    1. Update: 0a5fbcd9-e403-44cd-9fd0-38a2a942d394, 200 BundledUpdates: 2
    Update: fa5965dd-4c94-4564-982b-6d1d1dd6e688, 200 BundledUpdates: 0
    Update: 484f6b32-9a1f-41b8-9044-d6da29c13279, 200 BundledUpdates: 0
    1. Update (Missing): Definition Update for Microsoft Endpoint Protection - KB2461484 (Definition 1.173.646.0) (0a5fbcd9-e403-44cd-9fd0-38a2a942d394, 200)
    Failed to find update (fa5965dd-4c94-4564-982b-6d1d1dd6e688) with binary in update collection from WUA. Continuing with download.
    Async installation of updates started.
    Update 1 (0a5fbcd9-e403-44cd-9fd0-38a2a942d394) finished installing (0x00000000), Reboot Required? No
    Async install completed. Installation of updates completed.
    I Couldn't find much on the "Failed to find update" error but from this point i don't see any "1. Update (Missing): Definition Update.." entries since 26.04.14 for the non-updating servers, but it does show the async searching and scans
    completing.
    Also, working machines have 2 or 3 folders per ADR deployment in the C:\Windows\CCMcache containing files called AM_Delta_Patch_1.173.1491.0.exe etc. but non-working ones have folders with one AM_Delta.exe and 5 or 6 empty folders with the same date.
    Was thinking i'd locate the old defs in All Software Updates but they only go back as far as defs released on 30.04.14 so am a bit stumped!
    Thanks

  • SCEP 2012 definitions not updating on few clients

    Hi!
    The SCEP 2012 definitions are not updating on few clients. It works for all other machines.
    In MPLog i can only see that Signature update on date but not a line saying Signature updated via ...
    Its not telling me where it got the updates in past and why its not updating now..
    The definitions are pushed via SCCM, WSUS and MS not unc shares.
    Which log file i should look for to get some answers why its not updating.
    Thanks

    Hi,
    You can check C:\Windows\WindowsUpdate.log file to find the related error information.
    In addition, did you configure an automatic deployment rule to deliver definition updates? If yes, I recommend you to make sure that all the clients are in the collection.
    Best regards,
    Susie

  • SCEP definition updates for clients in DMZ

    Hello,
    I do want to enable SCEP definition updates for small group of clients in DMZ (apprx 30 -40)
    I have created a separate  AD OU and SCCM collection for such computers.
    Google shows me different ways like using Definition Update Automation Tool, WSUS, scripts, shares etc, and I am quite confused for which way to adopt.
    can any one suggest me which is the best automated way?
    I do have SCCM 2012 sp1 and all win 8 cleints.
    Thanks in Advance

    You can use whathever method you prefer. All will most likely work. As there's already Configmgr in place I'd use it to do this job. ADRs (automatic deployment rules) can be used to automate this process.
    Torsten Meringer | http://www.mssccmfaq.de

  • SCEP 2012 definition source location

    Hi!
    Where i can find the exact log entry from where my client updated its last definition.
    I saw some documentation where its pointing to MPlog and in that log i need to search for "signature updated via" in the MPlog but i dont have anything like that in MYlog. I want to see if my clients updated from my internal definitions server,
    Ms site etc.
    Thanks

    Try C:\Windows\WindowsUpdate.log and search for "Definition Update for Microsoft Endpoint Protection" (or just "endpoint", for example). If it's coming from ConfigMgr, you should see something like
    Agent: Installing updates [CallerId = CcmExec
    and if it's coming directly from Microsoft, you should see the URL it's downloading from.

  • Definition Update for Windows Defender - KB2267602 (Definition 1.165.4030.0) Failed Code 80070002

    What in the world???  W8.1 Update for Windows Defender fails over and over... tried cleanup, etc.  Microsoft guys, what is the matter with this???
    Anyone?  help please if you solved this...
    Definition Update for Windows Defender - KB2267602 (Definition 1.165.4030.0)
    Installation date: ‎2/‎13/‎2014 8:40 PM
    Installation status: Failed
    Error details: Code 80070002
    Update type: Important
    Install this update to revise the definition files that are used to detect viruses, spyware, and other potentially unwanted software. Once you have installed this item, it cannot be removed.
    More information:
    http://www.microsoft.com/athome/security/spyware/software/about/overview.mspx
    Help and Support:
    http://go.microsoft.com/fwlink/?LinkId=52661
    vat

    W8.1 Update for Windows Defender fails over and over... tried cleanup, etc.
    Anyone?  help please if you solved this...
    By the time you read this, a new Definition Update is already available, and this issue should no longer be relevant. However, the simple fix is this: DECLINE the annoying update and wait for the next Definition Update to be published.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • Myth II Soulblighter updated for Linux

    Myth II: Soulblighter has finally been updated for Linux to be compatible with Windows and Mac users running the latest version. No need to stick to the old Myth II 1.3e version by Loki.
    Project Magma is proud to announce the release of Myth II 1.7.2 for Linux.
    No longer will Linux players have to resort to using Wine or booting into Windows to take advantage of the latest improvements to Myth II or to play online with other players. Instead, they can now enjoy the same native Myth II experience alongside existing Windows and Mac players of the game.
    The Linux release of Myth II 1.7.2 is fully compatible with Myth II 1.7.2 on other platforms, allowing it to run the latest plugins available on The Tain and to play online on Mariusnet.
    Download the Myth II 1.7.2 Linux Installer or the Linux Demo today. The Myth II 1.7.2 Linux installer can be used to upgrade an existing Myth II installation or to install the updated version directly using an original Myth II CD.
    Going forward, we expect future updates to the game to be released on all three platforms simultaneously.

    Myth II: Soulblighter has finally been updated for Linux to be compatible with Windows and Mac users running the latest version. No need to stick to the old Myth II 1.3e version by Loki.
    Project Magma is proud to announce the release of Myth II 1.7.2 for Linux.
    No longer will Linux players have to resort to using Wine or booting into Windows to take advantage of the latest improvements to Myth II or to play online with other players. Instead, they can now enjoy the same native Myth II experience alongside existing Windows and Mac players of the game.
    The Linux release of Myth II 1.7.2 is fully compatible with Myth II 1.7.2 on other platforms, allowing it to run the latest plugins available on The Tain and to play online on Mariusnet.
    Download the Myth II 1.7.2 Linux Installer or the Linux Demo today. The Myth II 1.7.2 Linux installer can be used to upgrade an existing Myth II installation or to install the updated version directly using an original Myth II CD.
    Going forward, we expect future updates to the game to be released on all three platforms simultaneously.

  • SCEP definition updates for clients in DMZ via UNC is not working.

    Hello,
    I have configured SCEP definition updates via UNC method for my Win 8.1 clients in DMZ and its not working.
    Script is properly associated with task scheduler and downloading definition to shared folder properly.
    Even running the mpcmdrun.exe -SignatureUpdate, gives the below error:
    C:\Program Files\Microsoft Security Client>mpcmdrun.exe -SignatureUpdate
    Signature update started . . .
    ERROR: Signature Update failed with hr=80070002
    CmdTool: Failed with hr = 0x80070002. 
    MpCmdRun: Command Line: mpcmdrun.exe  -SignatureUpdate
     Start Time: ‎Sun ‎Jul ‎06 ‎2014 11:05:09
    Start: MpSignatureUpdate()
    Update started 
    Search Started (UNC share) (Path: \\sccm\SCEP_UNC_DEFS\Updates\x64)...
    Search Completed 
    Download Started...
    Download Completed 
    Installation Started...
    Installation Completed 
    Update completed with hr: 0x80070002
    ERROR: Signature Update failed with hr=80070002
    MpCmdRun: End Time: ‎Sun ‎Jul ‎06 ‎2014 11:05:17

    Hi,
    Please check logs on the client to see whether there are any helpful information.(ScanAgent.log, Windowsupdate.log and UpdatesHandler.log)
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Wsus + Scep 2012 Defenition Updates

    Hi 
    Im using Wsus to manage Pattern file updates for my scep 2012 clients an my proplem is that most Pattern files do get applied to my machines but like today my computers had
    Pattern file (1.185.908.0)  but when I check on Microsoft website they say the latest pattern file is (1.185.926.0) so I
    synced my wsus to see if there where any new files available and it return with nothing new... so I manualy ran "mpam-feX64" and my client got update to (1.185.933.0)  so it seems that my Wsus server is missing every other updates,,
     Can it be that MS is slow to update there Wsus Store or is something wrong with my wsus.. it is configured to check for updates every hour..  I also tested to let my workstation check online for updates and the result was the same "no new pattern
    files"  
    Best Regards 
    Jon G
    Jón G Sævarsson

    Can it be that MS is slow to update there Wsus Store or is something wrong with my wsus.. it is configured to check for updates every hour..
    Configured for "every hour" is probably a bit excessive, but much more likely is that you've not properly configured your WSUS server and your WSUS clients to be able to get Definition Updates in a timely manner.
    In addition to synchronizing WSUS at least 3x daily (every 8 hours), you also need to do the following:
    Create an Automatic Approval rule for the Definition Updates update classification for the "All Computers" target group.
    Enable the policy setting "Allow Automatic Updates immediate installation".
    Set the CLIENT Detection Interval to 6 hours.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • SCEP 2012 definition flow check via client logs

    Hi!
    I am looking for some documentation that contains detail information how definitions looks in the logs when client is updating definitions.
    Thanks

    Here's a recent blog post that gives a high-level view of the Windows Update process from a ConfigMgr client's view utilizing a software update point. It's relevant to any software update, but the specific example used in the screenshots is for a SCEP definition
    update, so it might be more along the lines of what you are looking for:
    http://blogs.technet.com/b/configmgrdogs/archive/2014/06/30/configmgr-2012-windows-update-client-process.aspx
    The key log is the WindowsUpdate.log because it will show you the source of update, whether it is coming from ConfigMgr or directly from Microsoft via the Internet (for example).

  • HT1338 Software Update is not finding latest release (April 3) of Java 2012 001 Update for Mac OS X Lion 10.7.3 on iMac mid-2007 that downloaded automatically on iMac mid-2011

    Software Update is not finding latest release (April 3) of Java 2012 001 Update on my iMac mid-2007, but it downloaded it automatically on my iMac mid-2011 yesterday. Both are running Mac OS X Lion 10.7.3. When I try to download the update manually from Apple on my older iMac, it downloads okay, but when I try to open the dmg file, I get a warning message saying that opening this update may make your computer LESS secure. Do you want to proceed? (I did not).
    Why would Software Update find this update and install it automatically on one iMac and not the other, if they are both running the same version of Mac OS X Lion? I checked the installed software list on my old iMac and the Java update does not appear there. Why would this update make my old iMac less secure?

    Recall that Java is not installed as part of Lion.
    You have to install it (and are asked if you want to) when you first try to run some java stuff.
    Is it possible that the iMac 2007 does not have Java yet?
    Try this: open Terminal (from Utilities) and type java -version (exactly like that, with the space before the hyphen).
    What do you get?
    Consistent with this theory is that the dmg thing gave you the warning - installing java might make your machine less secure because java is a means for bad guys to try to do bad things to your computer.
    charlie

  • Accessing remote sybase database on unix/linux machine thru telnet

    How can i access a sybase database server thru telnet....using java code. i am writing a client for windows...Also the Sybase server is on a unix or linux machine.............please elp me out ...its urgent..

    Why do you want to access it through telenet.
    If you want to access/manipulate data in the database use JDBC with a driver for Sybase (Which you will be able to find if you do some googling)

  • LabVIEW 8.0.1 Update for Linux

    Hello,
    I just downloaded the update for LabVIEW for Linux an tried to install like it is described.
    The following output occurs:
    Installing...
    /bin/sh: /soft/natinst/lv801-update/bin/INSTALL.norpm: No such file or directory
    /bin/sh: /soft/natinst/lv801-update/bin/INSTALL.norpm: No such file or directory
    /bin/sh: /soft/natinst/lv801-update/bin/INSTALL.norpm: No such file or directory
    /bin/sh: /soft/natinst/lv801-update/bin/INSTALL.norpm: No such file or directory
    Would you like to install NI Example Finder (LabVIEW 8.0.1)? [Ynq]
    /bin/sh: /soft/natinst/lv801-update/bin/INSTALL.norpm: No such file or directory
    /bin/sh: /soft/natinst/lv801-update/bin/INSTALL.norpm: No such file or directory
    LabVIEW package installation complete.
    Launching LabVIEW Mass Compile utility.
    When I start LabVIEW after the obviously successfull Mass Compile I still see LabVIEW Version 8 (in contrast to Windows where I get 8.0.1).
    Is it possible that the file bin/INSTALL.norpm is missing in the tar archive or that something else is broken? I am running Debian GNU/Linux Sarge.
    Thanks in advance,
    Armin Herzer

    hello armin herzer,
    did you download the LabVIEW 8.0.1 update and the "lv801-linux-norpm.tar.gz"?
    if not, you can get it here lv801-linux-norpm.tar.gz.
    regards,
    robert h
    NI germany

Maybe you are looking for