SCEP definitions do not update on Secondary site server

Issue: Win 2008R2 server - Secondary site server - SCEP is installed, but it cannot find/download/install any virus definitions. When attempting to hit "update" within the SCEP console, it returns no results. When attempting to
check online for Win Updates via control panel, no virus def updates are found (but 11 different updates are found for .NET and other things).
The error that is thrown in the Windows Updates log when attempting to update through the SCEP console is Error: 0x80248014. http://support.microsoft.com/kb/2832355/en-us Although this
applies to Windows 8, I still checked the settings per the article. My settings check out okay.
No error is thrown when attempting to check for updates via Windows Update in the control panel. It finds 11 available updates (none of which are SCEP related), and displays them properly.
This server has the CCM2012 client installed, and the Anti-Malware policy has been successfully applied. We have a separate Anti-Malware policy that is applied only to our SCCM site servers. The policy indicates that all virus defs are to be
obtained from Microsoft online Update. Our primary site server does not display this problem. It is updating automatically with no issues.
It is possible to manually download and apply the latest virus definitions by visiting the MS virus defs site and running the manual update installer. I have only done this to ensure that the virus defs are somewhat current.
Steps taken: I have removed SCEP and re-installed it. I have also attempted the Windows Update "Fix-it" found here.
http://support.microsoft.com/kb/971058
Error 0x80248014 persists when attempting an update through the SCEP console, and no SCEP related updates are found by Microsoft online Update.
Any suggestions on what I might try next?

Thank you for the reply.
Well, the issue with this secondary site server isn't 100% fixed, but your line of questions pushed me in a direction that allowed me to put a Band-Aid on it. That said, it is updating the virus defs - although not exactly as it should be. But,
this is good enough for me now.
To answer some of your questions that seem relevant. This is a fairly new SCCM setup. Our implementation of SCCM currently is not configured to handle any Software Updates yet. We still rely on a separate WSUS server in our environment for all
WinUpdates (including SCEP/FEP). With that in mind, the Anti-Malware policy that is applied to both SCCM servers use the following 2 locations in order for obtaining SCEP updates:
1) MS online Updates 2)WSUS
As mentioned previously, the secondary site never detected updates via SCEP console or WinUpdates via Control Panel. But this did not explain why it could not retrieve from WSUS.
A quick look at our WSUS setup shows that auto-approval is configured for all of our workstations, but not our servers. I corrected this within WSUS - Forced GPUpdate on the site server - ran wuauclt /detectnow on the site server - Now, the virus defs
were found and could be installed. (I'll have to wait a little while to see if it continues to update automatically as it should)
So, as I mentioned above - the big problem of not updating at all is corrected, however the issue still remains "why are no updates found from MS Updates online?"
At this point - I don't know, but as long as it updates in some fashion, I'm good with that.

Similar Messages

Package Not deploying to secondary Site

Dears,
I have 1 primary site and 2 secondary site servers configured. I distributed software update and One Java installation (Bat file) to all 3 servers, its getting installed for clients which are reporting to primary server & in one secondary server but
the packages are not getting downloaded to 3rd server which is acting as secondary site server. I checked Bits, redistributed packages but no luck. Kindly help what to troubleshoot in this case.
Regards,
Anil Suthar

Jeff,
Thank you for reply.
This is resolved after changing secondary DP setting, "Allow Clients to connect anonymously".
When i checked ccmmessaging.log i found "security context failed due to Integrated Windows Authentication failure". Dont know why, but after enabling above settings issue got resolved..

Slider timing is not updating on my site

Slider timing is not updating on my site. I have changed the js, but there has been no change. I have refreshed, viewed on different browsers and even looked on a completely different computer.

Try to sign out of your account "Settings > iTunes & App Stores" then sign back in and activate automatic downloads again as well as iTunes Match (if you are a subscriber)

TS4006 It will not update. Just sits in my App Store and freezes . I have a iPhone 4S with the latest software.

It will not update. Just sits in my App Store and freezes . I have a iPhone 4S with the latest software.

If it's freezing when you try to update apps, try force-closing the App Store app. From your home screen, double-tap the home button, locate App Store in the list on the bottom, tap an hold it until it wiggles, tap to close it, tap the home button again. Try updating again...any difference?

Uninstalling Secondary Site Server through SW Delivery fails

We have migrated to SCCM2012
and now need to uninstall our
SCCM 2007 Secondary Siteserver.
Since we have 300 Secondary Site Server
in the Hirarchy, the uninstall
of the software must be distributed.
We have to create a task sequence,
in which the following steps are
performed:
Put the server in the SCOM
Maintenance Mode
Stop SCCM services SMS_SITE_COMPONENT_MANAGER
and SMS_EXECUTIVE
Uninstalling the Secondary Siteserver with the
Command "{install path} \setup.exe /deinstall"
Cleanup of folders and files that are left
Restarting the Server
Take server out of the SCOM
Maintenance Mode
The uninstallation works well on all Windows Server 2008 R2 Server. But not on the Windows Server 2003. There we get errors "Failed to open key Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00\SMSTS"
and "MP name must be set in an environment variable" and "Fatal error is returned in execution of the action (Uninstall Secondary Site). The system cannot find the file specified. (Error: 80070002; Source: Windows)".
After this errors, the Task Sequence Deployment aborts.
Has anybody a solution for this situation?
Here is the SMSTS.Log
!--------------------------------------------------------------------------------------------! TSManager 26.02.2014 05:16:02 4392 (0x1128)
Successfully completed the action (Set TS Variable SSS_Uninstall to True) with the exit win32 code 0 TSManager 26.02.2014 05:16:02 4392 (0x1128)
Set authenticator in transport TSManager 26.02.2014 05:16:02 4392 (0x1128)
Set a global environment variable _SMSTSLastActionRetCode=0 TSManager 26.02.2014 05:16:02 4392 (0x1128)
Set a global environment variable _SMSTSLastActionSucceeded=true TSManager 26.02.2014 05:16:02 4392 (0x1128)
Clear local default environment TSManager 26.02.2014 05:16:02 4392 (0x1128)
Updated security on object K:\_SMSTaskSequence. TSManager 26.02.2014 05:16:02 4392 (0x1128)
Set a global environment variable _SMSTSNextInstructionPointer=25 TSManager 26.02.2014 05:16:02 4392 (0x1128)
Set a TS execution environment variable _SMSTSNextInstructionPointer=25 TSManager 26.02.2014 05:16:02 4392 (0x1128)
Set a global environment variable _SMSTSInstructionStackString=0 18 19 22 TSManager 26.02.2014 05:16:02 4392 (0x1128)
Set a TS execution environment variable _SMSTSInstructionStackString=0 18 19 22 TSManager 26.02.2014 05:16:02 4392 (0x1128)
Save the current environment block TSManager 26.02.2014 05:16:02 4392 (0x1128)
Start executing an instruction. Instruction name: Uninstall Secondary Site. Instruction pointer: 25 TSManager 26.02.2014 05:16:03 4392 (0x1128)
Set a global environment variable _SMSTSCurrentActionName=Uninstall Secondary Site TSManager 26.02.2014 05:16:03 4392 (0x1128)
Set a global environment variable _SMSTSNextInstructionPointer=25 TSManager 26.02.2014 05:16:03 4392 (0x1128)
Set a local default variable SMSTSDisableWow64Redirection TSManager 26.02.2014 05:16:03 4392 (0x1128)
Set a local default variable _SMSTSRunCommandLineAsUser TSManager 26.02.2014 05:16:03 4392 (0x1128)
Set a global environment variable _SMSTSLogPath=C:\WINDOWS\CCM\Logs\SMSTSLog TSManager 26.02.2014 05:16:03 4392 (0x1128)
Evaluating an AND expression TSManager 26.02.2014 05:16:03 4392 (0x1128)
Evaluating a file condition expression TSManager 26.02.2014 05:16:03 4392 (0x1128)
Expand a string: E:\Program Files\Microsoft Configuration Manager\bin\i386\smsexec.exe TSManager 26.02.2014 05:16:03 4392 (0x1128)
Expand a string: TSManager 26.02.2014 05:16:03 4392 (0x1128)
Expand a string: TSManager 26.02.2014 05:16:03 4392 (0x1128)
Expand a string: TSManager 26.02.2014 05:16:03 4392 (0x1128)
Expand a string: TSManager 26.02.2014 05:16:03 4392 (0x1128)
The condition for the action (Uninstall Secondary Site) is evaluated to be true TSManager 26.02.2014 05:16:03 4392 (0x1128)
Expand a string: smsswd.exe /run: "E:\Program Files\Microsoft Configuration Manager\bin\i386\setup.exe" /deinstall TSManager 26.02.2014 05:16:03 4392 (0x1128)
Expand a string: TSManager 26.02.2014 05:16:03 4392 (0x1128)
Start executing the command line: smsswd.exe /run: "E:\Program Files\Microsoft Configuration Manager\bin\i386\setup.exe" /deinstall TSManager 26.02.2014 05:16:03 4392 (0x1128)
!--------------------------------------------------------------------------------------------! TSManager 26.02.2014 05:16:03 4392 (0x1128)
Expand a string: WinPEandFullOS TSManager 26.02.2014 05:16:03 4392 (0x1128)
Executing command line: smsswd.exe /run: "E:\Program Files\Microsoft Configuration Manager\bin\i386\setup.exe" /deinstall TSManager 26.02.2014 05:16:03 4392 (0x1128)
[ smsswd.exe ] InstallSoftware 26.02.2014 05:16:03 11464 (0x2CC8)
PackageID = '' InstallSoftware 26.02.2014 05:16:03 11464 (0x2CC8)
BaseVar = '', ContinueOnError='' InstallSoftware 26.02.2014 05:16:03 11464 (0x2CC8)
ProgramName = '"E:\Program Files\Microsoft Configuration Manager\bin\i386\setup.exe" /deinstall' InstallSoftware 26.02.2014 05:16:03 11464 (0x2CC8)
SwdAction = '0001' InstallSoftware 26.02.2014 05:16:03 11464 (0x2CC8)
Working dir 'not set' InstallSoftware 26.02.2014 05:16:03 11464 (0x2CC8)
Executing command line: Run command line InstallSoftware 26.02.2014 05:16:03 11464 (0x2CC8)
Process completed with exit code 0 InstallSoftware 26.02.2014 05:31:19 11464 (0x2CC8)
Command line returned 0 InstallSoftware 26.02.2014 05:31:19 11464 (0x2CC8)
Process completed with exit code 0 TSManager 26.02.2014 05:31:19 4392 (0x1128)
!--------------------------------------------------------------------------------------------! TSManager 26.02.2014 05:31:19 4392 (0x1128)
Successfully completed the action (Uninstall Secondary Site) with the exit win32 code 0 TSManager 26.02.2014 05:31:19 4392 (0x1128)
Failed to open key Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00\SMSTS TSManager 26.02.2014
05:31:19 4392 (0x1128)
Failed to open key Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00\SMSTS TSManager 26.02.2014
05:31:19 4392 (0x1128)
MP name must be set in an environment variable TSManager 26.02.2014 05:31:19 4392 (0x1128)
Non fatal error 0x80004005 in sending task sequence execution status message to MP TSManager 26.02.2014 05:31:19 4392 (0x1128)
Set a global environment variable _SMSTSLastActionRetCode=0 TSManager 26.02.2014 05:31:19 4392 (0x1128)
Failed to open key Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00\SMSTS TSManager 26.02.2014
05:31:19 4392 (0x1128)
Failed to set a global environment variable _SMSTSLastActionRetCode=0.
The system cannot find the file specified. (Error: 80070002; Source: Windows) TSManager 26.02.2014 05:31:19 4392 (0x1128)
Clear local default environment TSManager 26.02.2014 05:31:19 4392 (0x1128)
TS::Execution::CCommandLineInstruction::Execute() failed with the error code 80070002 TSManager 26.02.2014 05:31:19 4392 (0x1128)
Fatal error is returned in execution of the action (Uninstall Secondary Site).
The system cannot find the file specified. (Error: 80070002; Source: Windows) TSManager 26.02.2014 05:31:19 4392 (0x1128)
An error (0x80070002) is encountered in execution of the task sequence TSManager 26.02.2014 05:31:19 4392 (0x1128)
Failed to open key Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00\SMSTS TSManager 26.02.2014
05:31:19 4392 (0x1128)
Failed to open key Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00\SMSTS TSManager 26.02.2014
05:31:19 4392 (0x1128)
MP name must be set in an environment variable TSManager 26.02.2014 05:31:19 4392 (0x1128)
Non fatal error 0x80004005 in sending task sequence execution status message to MP TSManager 26.02.2014 05:31:19 4392 (0x1128)
Failed to open key Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00\SMSTS TSManager 26.02.2014
05:31:19 4392 (0x1128)
Failed to open key Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00\SMSTS TSManager 26.02.2014
05:31:19 4392 (0x1128)
Failed to open key Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00\SMSTS TSManager 26.02.2014
05:31:19 4392 (0x1128)
Task Sequence Engine failed! Code: 80070002 TSManager 26.02.2014 05:31:19 4392 (0x1128)
**************************************************************************** TSManager 26.02.2014 05:31:19 4392 (0x1128)
Task sequence execution failed with error code 80070002 TSManager 26.02.2014 05:31:19 4392 (0x1128)
Cleaning Up. TSManager 26.02.2014 05:31:19 4392 (0x1128)
Removing Authenticator TSManager 26.02.2014 05:31:19 4392 (0x1128)
Failed to open key Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00\SMSTS TSManager 26.02.2014
05:31:19 4392 (0x1128)
Successfully unregistered Task Sequencing Environment COM Interface. TSManager 26.02.2014 05:31:19 4392 (0x1128)
Executing command line: "C:\WINDOWS\CCM\TsProgressUI.exe" /Unregister TSManager 26.02.2014 05:31:19 4392 (0x1128)
==========[ TsProgressUI started in process 12220 ]========== TsProgressUI 26.02.2014 05:31:19 7740 (0x1E3C)
Unregistering COM classes TsProgressUI 26.02.2014 05:31:19 7740 (0x1E3C)
Shutdown complete. TsProgressUI 26.02.2014 05:31:19 7740 (0x1E3C)
Process completed with exit code 0 TSManager 26.02.2014 05:31:19 4392 (0x1128)
Successfully unregistered TS Progress UI. TSManager 26.02.2014 05:31:19 4392 (0x1128)
Failed to open key Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00\SMSTS TSManager 26.02.2014
05:31:19 4392 (0x1128)
Failed to open key Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00\SMSTS TSManager 26.02.2014
05:31:19 4392 (0x1128)
Getting active request access handle TSManager 26.02.2014 05:31:19 4392 (0x1128)
Error opening HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\Task Sequence. code 80070002 TSManager 26.02.2014 05:31:19 4392 (0x1128)
Error - could not get package and program IDs. code 80070002 TSManager 26.02.2014 05:31:19 4392 (0x1128)
Failed to open the task sequence key HKLM\Software\Microsoft\SMS\Task Sequence. Error code 0x80070002 TSManager 26.02.2014 05:31:19 4392 (0x1128)
Start to cleanup TS policy TSManager 26.02.2014 05:31:19 4392 (0x1128)
End TS policy cleanup TSManager 26.02.2014 05:31:20 4392 (0x1128)
RegOpenKeyExW failed for Software\Microsoft\SMS\Task Sequence TSManager 26.02.2014 05:31:20 4392 (0x1128)
GetTsRegValue() failed. 0x80070002. TSManager 26.02.2014 05:31:20 4392 (0x1128)
End program: TSManager 26.02.2014 05:31:20 4392 (0x1128)
Error executing Task Sequence Manager service. Code 0x80070002 TSManager 26.02.2014 05:31:20 4392 (0x1128)
Sending error status message TSManager 26.02.2014 05:31:20 4392 (0x1128)
Failed to open key Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00\SMSTS TSManager 26.02.2014
05:31:20 4392 (0x1128)
Failed to open key Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00\SMSTS TSManager 26.02.2014
05:31:20 4392 (0x1128)
MP name must be set in an environment variable TSManager 26.02.2014 05:31:20 4392 (0x1128)
Non fatal error 0x80004005 in sending task sequence execution status message to MP TSManager 26.02.2014 05:31:20 4392 (0x1128)
Successfully finalized logs to SMS client log directory from C:\WINDOWS\CCM\Logs TSManager 26.02.2014 05:31:20 4392 (0x1128)
Kind regards Stefan Somogyi

Hi,
When removing a secondary site using the Delete Secondary Site Wizard, you must choose whether to delete or uninstall the secondary
site:
Deleting the site will delete all information about the site and its resources from the Configuration Manager site database at its
parent site, but it will leave the Configuration Manager secondary site installed on the secondary site computer. Select this option if you have already manually uninstalled the secondary site using Configuration Manager Setup at the secondary site computer.
When Configuration Manager 2007 sites are deleted, the deleted site information is only deleted from the deleted site's direct parent site. Site deletion
information is not propagated up the hierarchy to grandparent sites. In order to delete the site from the site database at sites above the deleted site's direct parent site, the hierarchy maintenance tool (Preinst.exe) must be run on every primary site above
the deleted site's parent primary site using the command Preinst /delsite. For more information about the hierarchy maintenance tool, see
Hierarchy Maintenance Tool (Preinst.exe).
Refer to:
How to Remove a Secondary Site Using the Configuration Manager Console
Thanks, Prabha G

Login settings will not update the local testing server files

When uploading to web server from local testing server, changing login settings in the control panel does not update the local testing server Restrict Access to page files. Causing login on website not to function.
It does however update the Connections file and the login wizard form.
What is the best way to change login settings before uploading site to web server?
Thanks
Dan

Dan - I am having the same exact problem. I'm using the restrict access and user registration and login - when attempting to use the Update Record wizard to allow users to change their password or email address, it doesn't change the record.

Replacing Secondary Site server with a new oneA

I have Secondary site running on Windows 2008 R2, but the server has some issue and i need to install a new secondary server.
The location is remote and Bandwidth a concern so i do not want all the packages to go over to the new Secondary Site /DP
Since the current Secondary site server is still alive , i want to take as much as from it .
Anyone has some suggestion on how i could accomplish this.

There's no built in way to do this in 2007; however, you should be able to use the preload package tool:
http://blogs.technet.com/b/configurationmgr/archive/2009/05/07/configmgr-2007-the-preload-package-tool-preloadpkgonsite-exe-explained.aspx . Using this tool, you can copy the pick files from the existing secondary to the new secondary site server.
Jason | http://blog.configmgrftw.com | @jasonsandys

Folder Redirection did not update to the new server

hello guys, I had migrated quite some time ago to a new server.
I thought everything works fine, basically the server functionality DNS, Replication and other stuff works fine.
But I notice that some of the workstation did not actually update its folder redirection to the new server.
Their desktop and my documents still points to the old server.
So their offline files, is becoming larger and larger.
I have some workaround but it's a lot of work. Question is, why those Win 7 workstation folder redirection did not update to the new server.
What should be the best practice? During the migration process from the old server to the new server, all workstation should be turned on?
Or any tools to update those workstation to the new server without losing their files?
Basically, just editing the registry to point to the new server will help. But it means losing their current files and whatever old stuff that is on the server will be the one that will be shown on their desktop and documents.
any inputs is greatly appreciated.
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
IT Stuff Quick Bytes

Hi biswajeetpattnaik, before migration it was Windows 2003.
Then I introduce Windows 2008.
Then I introduce a new Windows 2012.
Now Windows 2012 is the main DC.
Actually, everything is under control right now. As what I said on my first post, I manage to do some work around.
The only question I have on mind, is how on earth this thing happen.
I was assuming, that the workstation will be able to point to the new server, without any glitch since everything is working fine.
And the GPO was applying on the workstation. If I type gpresult /v on the workstation is it being applied. Even if I run GP Modelling it is also shows on the result that the folder redirection is being applied.
But to my surprise the folder redirection still points to old server, if I have not discovered it then it would be difficult if some files will get lost.
Thanks for your reply.
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
IT Stuff Quick Bytes

SCEP standalone client not updating

Hi All
I have standalone SCEP installed clients which do not reboot, however I have noticed that the clients are not updating their definitions they have been sitting there 5 days now and no updates applied.
The policy is to look at a UNC path followed by Microsoft but the client does not. The Definition Update Policy is also set to check for definitions everyone 4 hours, my understanding was if it cannot find definitions at the UNC path then it should go to
Microsoft to receive the updates. I have also set it to force a definition update if the computer is offline for more than two consecutive scheduled updates.
Any ideas please ?

How did you deploy policy for them?
Are you sure policies been applied to these endpoints?
Try change priority to first check Microsoft Update website and then UNC and see whether it makes any different or not?

Content NOT distributing to secondary sites

I've got one primary site and two secondary sites. I'm trying to push out a windows update to all my DP's and distribute them to my clients. The primary site works just fine and all clients got the update, but when I look at the deployment package
it just shows as "In Progress" for distributing the content out to the other DP's located at my secondary sites. Any idea where to look to see whats going on?
***EDIT***
When I look under the content status for it, the message says "Distribution manager instructed Scheduler and Sender to send package SP0000F to child site "Secondary Site"

Yes, when I log in to a client here at my primary site and look in Start > Run > gpedit.msc and go to Computer configuration > Administrative Tools > Windows Components > Windows Updates I can see where it says "Specify intranet Microsoft
update service location" and it shows my Primary Site server. However, if I go to that same spot on my clients at my secondary site (except for one client that is actually working correctly) it doesn't show anything in that field, it just says "Not
configured." Its almost like all my clients at my secondary site have no clue where to go for anything.
As for the WUAHandler.log it literally only has 7 entries and they are all the same, here is the entire log:
CWuaHandler::SetCategoriesForStateReportingExclusion called with E0789628-CE08-4437-BE74-2495B842F43B;E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3; for leaves and E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3;
for bundles WUAHandler
10/28/2014 2:27:56 PM 4832 (0x12E0)
CWuaHandler::SetCategoriesForStateReportingExclusion called with E0789628-CE08-4437-BE74-2495B842F43B;E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3; for leaves and E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3;
for bundles WUAHandler
10/28/2014 2:31:38 PM 1352 (0x0548)
CWuaHandler::SetCategoriesForStateReportingExclusion called with E0789628-CE08-4437-BE74-2495B842F43B;E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3; for leaves and E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3;
for bundles WUAHandler
10/28/2014 3:47:28 PM 3648 (0x0E40)
CWuaHandler::SetCategoriesForStateReportingExclusion called with E0789628-CE08-4437-BE74-2495B842F43B;E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3; for leaves and E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3;
for bundles WUAHandler
10/28/2014 4:59:05 PM 2212 (0x08A4)
CWuaHandler::SetCategoriesForStateReportingExclusion called with E0789628-CE08-4437-BE74-2495B842F43B;E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3; for leaves and E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3;
for bundles WUAHandler
10/28/2014 7:47:38 PM 924 (0x039C)
CWuaHandler::SetCategoriesForStateReportingExclusion called with E0789628-CE08-4437-BE74-2495B842F43B;E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3; for leaves and E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3;
for bundles WUAHandler
10/29/2014 12:47:26 AM 3572 (0x0DF4)
CWuaHandler::SetCategoriesForStateReportingExclusion called with E0789628-CE08-4437-BE74-2495B842F43B;E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3; for leaves and E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3;
for bundles WUAHandler
10/29/2014 5:47:35 AM 3328 (0x0D00)

SCCM 2012 :::WSUS Getcookie error blocking SCEP definition Scan and updates

Please advise me what could be reasons for this issue and how to resolve it. because of this client is not able to scan and retreive updates against SUP and SCEP Defintion is not getting updated. a few set of servers are facing
this issue. Another set of servers( sccm client is working fine against same SUPs.

That does not cause any issues IMHO. There should be another error later in the log. Also examine U*.log in %windir%\ccm\logs)
Torsten Meringer | http://www.mssccmfaq.de

SCCM 2012 R2 Secondary site server will support the DMZ Zone?

We are planning for SCCM 2012 Migration, currently we have separate Primary server in DMZ.
Kindly suggest what is the best method to deploy in the DMZ (separate primary or secondary or DP) because we have only 500 Client in DMZ.

Hi,
There is a blog talking about this error. You could try the method in the blog.
To summarise, when installing SCCM 2012 SP1 secondary site on a pre-configured SQL 2012 instance regardless which SQL edition is being used, “NT AUTHORITY\SYSTEM” account needs to be given
securityadmin and sysadmin rights. If SQL Express is used, there are few additional steps need to be carried out to configure the SQL TCP connection as documented in my previous blog:
http://blog.tyang.org/2012/04/09/installing-sccm-2012-rtm-secondary-site-using-a-pre-installed-sql-express-2008-r2-instance/
Installing SCCM 2012 SP1 Secondary Site with a Pre-Configured SQL 2012 Instance
Note:
Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Site Code for SCCM Clients installed from Secondary Site Server

Hello,
We have started the implementation of SCCM 2012 R2 at our network. We have setup a Primary site (JFO) server & pushed out the installation of SCCM clients to the local subnet. Things went fine.
We have installed a Secondary site (ATC) at a remote network. We have tested client installation in the installation wizard we specify to install the client from the Secondary server. When SCCM client installed from the Secondary server, the site
code that appears on the client in the control panel->Configuration Manager client settings is the site code of the primary site and not the secondary site.
Is this behavior is normal

Ultimately, secondary sites do *not* manage clients and so will never be assigned to the secondary site. However, do note that resources in the console that represent systems that do not have the client agent may show the site code of the secondary site
if they fall within a boundary group associated with that secondary site. This is done so that client push can be initiated from the correct site. More gory details at http://blog.configmgrftw.com/secondary-sites-and-boundary-groups/
Jason | http://blog.configmgrftw.com | @jasonsandys

Clients Not Updating After Migration from Server 10.7 to 10.8 (update to cashing server)

My school has been providing updates using Update Server on Lion. With the update to Mountain Lion Server we switched to Cashing Server for updates and I removed the WG Manager (please no lecutres on WGM, I am transitioning) setting that pointed to the Update Server. Some of my clients are not updating now. My guess is that they are still looking to my update server.
Is this an accurate diagnosis and how can I clear out this pointer?

My school has been providing updates using Update Server on Lion. With the update to Mountain Lion Server we switched to Cashing Server for updates and I removed the WG Manager (please no lecutres on WGM, I am transitioning) setting that pointed to the Update Server. Some of my clients are not updating now. My guess is that they are still looking to my update server.
Is this an accurate diagnosis and how can I clear out this pointer?

Secondary Site Server Installation ~~~SCCM 2012

Hi Guys,
While configure secondary site I'm getting below failure.
please suggest me the complete step for solving the issue.
[Failed]:A site server or site system role is already installed on the computer selected for site server installation. Remove the site or site system role from the computer, or select another computer for site server installation.

Are you trying to install a secondary site from a Configuration Manager 2012 SP1 CU2 environment?
2867422
(http://support.microsoft.com/kb/2867422/ )
FIX: Errors when you try to install or recover a secondary site in System Center 2012 Configuration Manager
If so, apply CU3 http://support.microsoft.com/kb/2882125/en-us
Tim Nilimaa | Blog: http://infoworks.tv | Twitter: @timnilimaa

SCEP definitions do not update on Secondary site server

Similar Messages

Maybe you are looking for