SCEP going out to the internet after being migrated to SCCM 2012 and saturating facility MPLS.

I was unaware of the fact that SCEP was gonig out to the internet to pull down 120 megs worth of data each time a client is migrated. I'm trying to determine the easiest or best way to avoid this. I've done some research and it looks like bundeling the SCEP
policy with the migration package might work. I also saw some tool that you can use to add a SCEP update rollup to the package. Ultimately if i could just get the exact URL the clients are going out to our networking team could apply QoS to this URL. Unfortunately
though it appears in the MPCMDRUN.log to go to go.microsoft.com/fwlink, but on the networking side in pathview i seen the client ends up going to Akamai.
I'm assuming MS offloads their web traffic to Akamai and that first link is redirected, if that is even the right link. Does anyone know a way i can prevent this while still getting the client up to date. This entire time I thought the clients would pull
what they needed from the SCCM 2012 env. I'm using ADR to push the definitions and that seems to be working fine except for 2 situations. One a client is migrated, or 2 the client comes online after being offline for more than 7 days and goes out.
Either way if someone could provide me with the URL for throttling or a better method for deploying I would be very grateful. So far we've migrated about 8 thousand clients and have about another 10 thousand to go. The majority of the clients have local
pull DPs, and if further details of my infrastructure would be helpful please just let me know.
Thanks,
-KR

Jorgen,
I appreciate you pointing out the setting and that has helped partially and I was able to track down the URL that is being used by the clients for QoS by networking. Now management has pushed back with why are the clients going to the internet at all. I
can understand why. If were deploying all the patches why can't the clients pull their SCEP engine from the SUP/WSUS server. I see it finding it in the MPCMDRUN.Log file but it still goes out to Microsoft to pull the 120 meg file. Do i not have any other options
for pushing the engine to the clients, if ADR is working for current clients what am i missing. I'm sure its something obvious, but my migration is on hold up until I can keep the clients from going to the internet for their new engine and deltas.
Any help you could provide i would very much appreciate. Thanks again Jorgen.
-Sam Kachar

Similar Messages

Can not reconect to the internet after being abroad.

I have been abroad and on my return can't reconect to the internet with my Ipad
even though my main computer can conect to btinternet.

You should probably reset your network setttings
Settings>General>Reset>Reset Network Settings

Even though my wi-fi is up and available my mac seems to take it off the list after being idle for a while and does not auto re log on no matter how many times i enter it in preferences

Every time my Mac has been idle for a while and i go to mail or safari they fail as the network has been deselected even though it is on .My Touch never has a problem just my iMac I put the details back in and apply them and lock it , if i stay on for hours and hours no problem but if i leave for a while when i get back the network is not selected in the list … it is there just not ticked … the lock is still on and an ADMIN password required to change it is ticked .
HELP this is so…so… anoying .

Every time my Mac has been idle for a while and i go to mail or safari they fail as the network has been deselected even though it is on .My Touch never has a problem just my iMac I put the details back in and apply them and lock it , if i stay on for hours and hours no problem but if i leave for a while when i get back the network is not selected in the list … it is there just not ticked … the lock is still on and an ADMIN password required to change it is ticked .
HELP this is so…so… anoying .

After ios5 upgrade cant get out to the internet via wireless, it wont get past our Smart Filter (web filter)

I just upgraded my 3GS to IOS5, and now at work when i am connected to our WiFi I can no longer get out to the internet.
A little back story on how it worked prior to ios5:
I would connect via wireless, and then load Safari and type in a webpage I wanted to go to. A pop up box would come up, to authenticate me on our Web filter server (Running Smartfilter), I woudl enter my regular Active Directory username and Password and boom, i could then surf to my hearts content.
After the upgrade, I connect to the wireless, load Safari, type in the webpage i want to go to, and the progress bar moves abotu 3mm and then stops, I never get the smart filter prompt.
I have tried a full reset on the phone, forget network, reset all network settings, I even tried putting in the IP address of the smart filter box as a proxy and still it doesnt work. I have gone to smartfilters website to see if anyone else has posted there, or if there was a clue as to why it doesnt work, but nothing so far.
anyone else having this problem? any ideas?
If it wasnt broken, why would apple mess with it! a LOT of companies run smartfilter as well as other web filters. I thought apple was trying to seduce corporate customers, and so far a lot of poeple are dissapointed that they cant get to the internet.
tha
nks in advance for any assistance.
j

I am having the same problem. The issue also occurs with Safari on Mac OS 10.7. I work for a school and I am sure that other schools are using smartfilter too.

I am unable to synch my iPhone to my laptopI have tried to carry out software updates - I get a message saying that the updates could not be completed as I am not connected to the internet - despite being connected to the internet!

I am unable to synch my iPhone to my laptopI have tried to carry out software updates - I get a message saying that the updates could not be completed as I am not connected to the internet - despite being connected to the internet!

What OS on your Mac?
What iOS on your phone??

Addresses exist in local AD/Exchange environment; possible to send to those addresses internally and have them route out to the internet?

Short story; Company A acquires Company B. B is still using their external mail system for a period of time before transititioning to A's email. After B moves to A's mail server, they will continue to receive mail to their legacy addresses/domains
(companyb.com) for a period of time. B already has objects defined in A with a companya.com SMTP address. Is it possible to prestage B's objects with their legacy SMTP addresses, while at the same time allowing users from A to send messages
to B's legacy SMTP addresses and have it route out to the internet and not to B's local mailbox?
I realize that Exchange is first going to determine if the address is local, and if so deliver it, which is what is happening. But is there a rule/exception that can bypass that such that @companyb.com will go out a send connector even if the address
exists locally?

I realize that Exchange is first going to determine if the address is local, and if so deliver it, which is what is happening. But is there a rule/exception that can bypass that such that @companyb.com will go out a send connector even if the address
exists locally?
No. If the exact SMTP address exists in the org, it will never leave the Exchange org when sent from an authenticated user.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Connected to the network, but can't get out to the Internet

Here’s my problem… After my previous router died, I recently installed a Netgear wireless router (WGT624NA) with 128-bit WEP security, and created a new wireless network. My Powerbook G4 found the network, and I was able to put in my WEP password, and everything seemed to work fine … for a while. In the last couple of days, I can’t get to any Internet sites.
I’m connected to the wireless network fine, with a strong signal level, and I seem to be able to Ping out. But when I try to go to (any) Internet site on Safari, I now get “Safari can’t connect to the server”. I’ve gone through the Network Setup Assistant, put in the correct WEP code, and after hitting “continue” from the “You’re now ready to try connecting… “ screen, get “Unable to establish a network connection”.
I seem to be connected, but can’t get out. Help.
Powerbook G4 Mac OS X (10.3.9)

Hi there,
A UPS (Uninterruptible power supply) is a battery back up, so if you power goes out you can finish up what you're working on and shut down normally.
I had a similar incident this week, power went out all computers, modem and router went out. After power was restored all started up fine and looked good. Wireless router showed I was connected to the internet but could not surf any site. I had changed my email account password several weeks earlier (email account provided by my ISP) and did not think this had anything to do my boradband connection, but I was wrong.
To make a long story short, I had to update the password as it related to my broadband connection. The connection was there, it just did not recognize my new password because I had changed it... If you control the account and you've changed any passwords associated with account yu will have to update or your landlord will have to update... make sense?
Rick
iMac G5 iSight 20" - 30G iPOD in Slimming Black - Mac OS X (10.4.7) - HP Pav 15" WS and Toshiba Sat 17" WS LP's - Canon 20D & A620

Firefox disconnects from the internet after a while

Hi,
i have the latest version of firefox and in the recent days i have been experiencing a very annoying issue. My computer is on and connected to the internet for many hours a day. This has never been a problem so far but now i have noticed Firefox suddenly becomes unable to connect to the internet after a while of being on. No page will finish loading no matter how long i wait.
I try by closing and reopening Firefox and I get an error saying Firefox is still running and that i need to close it and when i close that error then i get another error saying it was unable to load my profile. I close that and reopen Firefox which at the beginning works normal again but after 3 or 4 minutes it disconnects again. I repeat the whole process and i still get the same results until i restart my computer.
No other programs have this problems only Firefox. What can i do?
Thank you.

Boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware

I have taken all measures to clear my iPad but still getting kicked out of the internet and sent to my home page. What next?

I have taken all recommended measures to clear my iPad Air but, I still get kicked out of the internet. Problem seems to be more frequent as time passes

I don't know what you mean by "all recommended measures."
Please tell me that it has NEVER been jailbroke. If that's the case, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

I cannot connect to the internet after switching providers. I've changed the email address associated with the new account but am sure there is something else I need to change. Can anyone help me?

I cannot connect to the internet after switching providers. I've changed the email address associated with the new account but am sure there is something else I need to change.   I have also changed the apple information as well including user name and password. Can anyone help me? (This is an ipad question).

Apple ID: Changing your Apple ID
http://support.apple.com/kb/ht5621
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796?viewlocale=en_US&locale=en_US
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
iOS: Changing the signed-in iTunes Store Apple ID Account
http://support.apple.com/kb/ht1311
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Motion Tracking An Object That Goes Out Of The Sceen?

Hi i am quite new to after effects i have only been using it for a few months im using after effects cs4,here is my problem i am trying to track a picture frame but when the picture goes out of the scene,the motion tracking path just goes crazy. It works great when the picture frame is in the scene
example
the camera is pointing straight at the picture frame, works perfect, but when the camera turns right , and the picture frame is no longer in the scene, my track path just goes wrong.
How do i stop this?
Do i have to make a seperate motion tracking null object? or is it something to do with backwards tracking?
Any help on this would be great i have serched youtube,adobe for the answer but i cannot find it anywhere
Thanks
Mike

Yes, that's just how it is. AE has no way of knowing where those markers might be and even tracking points separately and in segments can only take you so far. You'll have much better luck trying such things with mochaAE, which comes with the main program. IUt assumes that all points would be part of a plane. If even that isn't enough, then probably 3D matchmoving tools like SynthEyes are your only option...
Mylenium

Everytime I close out of the internet and go back in, I have to reinstall firefox, why?

I use to have firefox on my computer and then all of a sudden it was gone. This happened about a month ago. I reinstalled 3.6 version for my online classes and everytime I close out of the internet I loose firefox. I have to go to my downloads and reinstall it. Is there a way to fix this?

If you want to change the layout to be more like Firefox 3.6, you can do so. Firefox 9.0.1 is the current version and Firefox 10 will replace it at the end of January 2012. The only other version of Firefox that is currently supported and updated is Firefox 3.6.25, '''but support for the Firefox 3.6 version is likely to end soon'''.
To change newer Firefox versions to look more like Firefox 3.6.x:
*See --> https://support.mozilla.org/en-US/kb/common-questions-after-upgrading-firefox-36
*See --> http://www.computertechtips.net/64/make-firefox-4-look-like-ff-3-6/
*See --> http://blog.fligtar.com/2011/01/16/how-to-customize-firefox-4s-ui/
*See --> '''''Firefox 3 Theme for Firefox 4+''''': https://addons.mozilla.org/en-US/firefox/addon/firefox-3-theme-for-firefox/
**Add color home, back/forward and other buttons (like Firefox 3) to the Navigation Toolbar in place of the gray buttons in Firefox 4+
**See: http://ffaddons.game-point.net/ff3ff4/
*Also see: http://support.mozilla.org/en-US/kb/How+to+customize+the+toolbar
Firefox 3.6.25 (supported/updated only for a short time):
*Download --> https://www.mozilla.org/en-US/firefox/all-older.html
*See --> http://kb.mozillazine.org/Go_back_to_an_old_version_of_Firefox
*For a smoother downgrade transition --> http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
*You also might want to see:
**http://support.mozilla.org/en-US/kb/Backing+up+your+information
**http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''

Audio goes out on my Air after I unplug my headphones.

Audio goes out on my Air after I unplug my headphones. Reset did not fix it.

Hi johnfan1939,
Although this article specifically mentions the iPhone, many of the steps apply for the iPad as well.
iPhone: No sound or distorted sound from speaker
Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:Restart the iPhone.Restart the iPhone.
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved, please contact Apple Support.
Best Regards,
Nubz

[SOLVED] Failed to access the Internet after disabling networkmanager

How can I get access to the Internet after networkmanager is down? I disabled the networkmanager and uncommented the static IP settings I used to use and reboot, but I'm still unable to get access to the Internet. (Failed to ping 8.8.8.8, which means the problem isn't DNS.)
Here's how this happened:
I used to get access to the Internet on my ArchLinux machine by setting up a static IP address in /etc/rc.conf. This worked fine. Then one day I needed to do something difficult without a networkmanager, so I installed the network-manager-applet via pacman, which worked fine as well, until one day after I ran pacman -Syu and rebooted, many programs, including the network-manager-applet are unable to work, saying the system is missing libpng14.so. My workstation was connected to a wireless connection at that time (the same one before my last pacman -Syu and reboot), and I tried to run pacman -Syu again and the network seemed to still be working. So I didn't take it as a big problem at that time.
But now, after I brought it to work (where I connect to the Internet via a wired network and a static IP), I found myself unable to get access again to the Internet, even after I removed networkmanager from the DAEMONS in rc.conf, and uncommented the static IP settings that used to work. And It's not DNS problems since I'm unable to ping 8.8.8.8 or any other known IPs directly (it says destination host is unreachable).
Here's my rc.conf files, the IP address and gateway stuff couldn't be wrong so hope you don't mind I use something like XX.XX.XX.XX instead:
LOCALE="en-US.UTF-8"
DAEMON-LOCALE="no"
HARDWARECLOCK="localtime"
TIMEZONE="Asia/Shanghai"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
MODULES=(wl)
UDEV_TIMEOUT=30
USEDMRAID="no"
USEBTRFS="no"
USELVM="no"
HOSTNAME="lastland"
interface=eth0
address=XX.XX.XX.XX
netmask=255.255.255.0
broadcast=XX.XX.XX.255
gateway=XX.XX.XX.XX
NETWORK_PERSIST="no"
DAEMONS = (syslog-ng network crond dbus kdm alsa)
Last edited by lastland (2012-02-08 15:39:10)

ewaller wrote:
It would be helpful if you could share the output of ip addr
It might show the data you have obfuscated, so either check it to see if it is rational, obfuscate the bits you don't want to share, or trust us
Of course, if the address starts with 10, 172, or 192, it does not really matter if you share it with us as it is a private network address anyway.
Also, the output if ip route will be helpful. Also, can you ping the address you think is the address of your machine from your own machine?
edit: typo
Oh thank you for the hint! The ip addr command really helps me figure out that my eth0 MAC address is not the right one. Though I don't know how it happens, I succeed to get back to the Internet and reply this post via my ArchLinux workstation. Thank you!

My time capsule loses connection to the internet after a short amount of time. It works for 1-2 minutes then stops, any suggestions?

I just replaced a generation 1 time capsule with the brand new 3TB TC version. I connected it and did all of the restarts and even called apple and spent over and hour and we simply couldnt figure it out. Right when the devices (modem and router) are done re-booting I receive green lights in airport utility on both the base stattion TC and the internet. The internet is screaming fast and I am able to go to new websites. Then after just a couple minutes (1-2) the internet light switches from green to amber and I drop my connection. I feel like I have tried everything but it keeps losing the connection. Any suggestions?

Exactly what modem are you using?
And what mode is the TC running in and how is it connected and what mode does it work in?

SCEP going out to the internet after being migrated to SCCM 2012 and saturating facility MPLS.

Similar Messages

Maybe you are looking for