SCEP2012 Remediation stauts unkown

Hi
In my scenario, we have more than 2000 servers installed with scep2012 & most of servers while checking in report it shows "Active client is at risk status" and further if I go inside of that report under Endpoint Remediation protection tab
under it Endpoint protection status:unknown . I don't know what was the exact issue can anyone help me on this.
Thyag

Hi
Also this one missed in previous thread
Failed to get the wmi query result for error = 80010105 ExternalEventAgent 26-03-2015 01:39:28 280 (0x0118)
Sent 0 state messages successfully and skipped 0 input entries. ExternalEventAgent 26-03-2015 01:39:28 280 (0x0118)
Send State Message finished. ExternalEventAgent 26-03-2015 01:39:28 280 (0x0118)
Failed to get the wmi query result for error = 800106F7 ExternalEventAgent 26-03-2015 01:39:28 280 (0x0118)
Sent 0 state messages successfully and skipped 0 input entries. ExternalEventAgent 26-03-2015 01:39:28 280 (0x0118)
Send State Message finished. ExternalEventAgent 26-03-2015 01:39:28 280 (0x0118)
Sent 0 state messages successfully and skipped 0 input entries. ExternalEventAgent 26-03-2015 01:39:29 280 (0x0118)
Send State Message finished. ExternalEventAgent 26-03-2015 01:39:29 280 (0x0118)
CExternalEventEndpoint::HandleMessage. ExternalEventAgent 26-03-2015 04:45:00 300 (0x012C)
Start to execute action for hint TestAndEnableEndpointNotification ExternalEventAgent 26-03-2015 04:45:00 300 (0x012C)
Start to test and renew notification for group: EndpointProtection ExternalEventAgent 26-03-2015 04:45:00 300 (0x012C)
Thyag

Similar Messages

ISE 1.2 - AV/AS Remediation missing vendors

Trying to create a remediation rule in ISE 1.2 patch 3 and the drop down list for the AV/AS Vendor Name is not scrollable so I am not able to select our AS/AV vendor. See picture below:

You're right. I just tested this and was able to scroll down using the down arrow on the keyboard.

Unkown failure when submitting a form to PHP web page

Hello.
I've been having a following issue when using Adobe Reader X version 10.1.3.23 and the newest version.
An error occurred during submit process. Unkown failure.
This happens when the document is receiving data from web page.
Following javascript is behind the submit button:
this.submitForm({
cURL: "http://path.to.url/index.php",
cSubmitAs: "XFDF" // the default, not needed here
In the web page there is a script that processes the data and after that it sends pdf document to the user that has submitted the form:
header('Content-type: application/pdf');
header('Content-Disposition: attachment; filename="confirmation.pdf"');
readfile('confirmation.pdf');
The problem only occurs on some computers i've tried this form. I have no idea why this is happening. Any ideas?

The submit button is in the PDF file.
http://s29.postimg.org/v5y4hmyg7/error.png

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013

I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?

I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?

Please review the options below to determine which method is best to remove the Adware installed on your computer.
The Easy, safe, effective method:
http://www.adwaremedic.com/index.php
If you are comfortable doing manual file removals use the somewhat more difficult method:
http://support.apple.com/en-us/HT203987
Also read the articles below to be more prepared for the next time there is an issue on your computer.
https://discussions.apple.com/docs/DOC-7471
https://discussions.apple.com/docs/DOC-8071

SYSTEM FAILURE로 PO STAUTS가 INPROCESS 상태시 해결방법

제품 : MFG_PO
작성날짜 : 2006-05-17
SYSTEM FAILURE로 PO STAUTS가 'INPROCESS' 상태시 해결방법
========================================================
PURPOSE
Document approval manager가 fails 되어 down 되면 PO는 IN PROCESS 상태가
된다.이 PO에 대한 available한 workflow가 없고,reprocess 하기 위해
wfretry를 시도해도 실패한다면 아래 script를 이용한다.
(Oracle Purchasing - Version: 11.5.9)
Explanation
Document approval시 발생하는 Document Approval Manager crashing은 PO의상태를 IN PROCESS로 만드는 원인이 된다.
Workflow는 완전히 처리되지 못하고 workflow activities processes와
system 안에서 "lost" 상태가 된다.
이 때 wf_item_key는 어떤 active한 workflow와도 상응하지 못하기 때문에
불필요한 상태가 되어 버린다.
System crash로 인해 session variable data를 잃어버렸기 때문에 wfretry
를 실행해도 workflow는 restart 되지 못한다.
Solution :
아래 steps에 따라 작업한다.
NOTE: 이 script는 oracle의 승인 및 review 없이 사용할 수 없으며, 예산
계정을 사용하는 경우 사용할 수 없다.
1. Please run the following sql update:
-- START OF RESET SCRIPT
set serveroutput on size 100000
DECLARE
CURSOR potoreset is
SELECT wf_item_type, wf_item_key, po_header_id, segment1,
revision_num, type_lookup_code
FROM po_headers_all
WHERE segment1 = '&PO_NUMBER '
and authorization_status IN ('IN PROCESS', 'PRE-APPROVED')
and NVL(cancel_flag, 'N') = 'N'
and NVL(closed_code, 'OPEN') != 'FINALLY_CLOSED';
CURSOR maxseq(id number, subtype po_action_history.object_sub_type_code%type) is
SELECT nvl(max(sequence_num), 0)
FROM po_action_history
WHERE object_type_code IN ('PO', 'PA')
AND object_sub_type_code = subtype
AND object_id = id
AND action_code is NULL;
CURSOR poaction(id number, subtype po_action_history.object_sub_type_code%type) is
SELECT nvl(max(sequence_num), 0)
FROM po_action_history
WHERE object_type_code IN ('PO', 'PA')
AND object_sub_type_code = subtype
AND object_id = id
AND action_code = 'SUBMIT';
submitseq po_action_history.sequence_num%type;
nullseq po_action_history.sequence_num%type;
BEGIN
dbms_output.put_line('------------------------------------');
dbms_output.put_line('Data Manipulation Scripts Disclaimer');
dbms_output.put_line('------------------------------------');
dbms_output.put_line('As always please ask customer to run the scripts on their test instance first ');
dbms_output.put_line('before applying it on production. Make sure the data is validated for ');
dbms_output.put_line('correctness and related functionality is verified after the script has been');
dbms_output.put_line('run on a test instance. Customer is responsible to authenticate and verify ');
dbms_output.put_line('correctness of data manipulation scripts.');
FOR pos in potoreset LOOP
dbms_output.put_line('Processing '||pos.type_lookup_code||' PO Number: '||pos.segment1);
dbms_output.put_line('......................................');
dbms_output.put_line('Closing Notifications...');
BEGIN
UPDATE wf_notifications set status = 'CANCELED'
WHERE notification_id in (
select ias.notification_id
from wf_item_activity_statuses ias,
wf_notifications ntf
where ias.item_type = pos.wf_item_type
and ias.item_key = pos.wf_item_key
and ntf.notification_id = ias.notification_id)
AND NVL(status, 'OPEN') = 'OPEN';
EXCEPTION
WHEN OTHERS THEN
null;
END;
dbms_output.put_line('Aborting Workflow...');
BEGIN
WF_Engine.AbortProcess(pos.wf_item_type, pos.wf_item_key);
EXCEPTION
WHEN OTHERS THEN
null;
END;
dbms_output.put_line('Updating PO Status...');
UPDATE po_headers_all
set authorization_status = decode(pos.revision_num, 0, 'INCOMPLETE','REQUIRES REAPPROVAL'),
wf_item_type = NULL,
wf_item_key = NULL,
approved_flag = decode(pos.revision_num, 0, 'N', 'R')
where po_header_id = pos.po_header_id;
OPEN maxseq(pos.po_header_id, pos.type_lookup_code);
FETCH maxseq into nullseq;
CLOSE maxseq;
OPEN poaction(pos.po_header_id, pos.type_lookup_code);
FETCH poaction into submitseq;
CLOSE poaction;
IF nullseq > submitseq THEN
dbms_output.put_line('Deleting PO Action History...');
DELETE FROM po_action_history
WHERE object_id = pos.po_header_id
AND object_type_code IN ('PO', 'PA')
AND object_sub_type_code = pos.type_lookup_code
AND sequence_num >= submitseq;
END IF;
dbms_output.put_line('Done Processing.');
dbms_output.put_line('................');
dbms_output.put_line('Please issue commit, if no errors found.');
END LOOP;
END;
-- END OF RESET SCRIPT
2. If the above sql update completes without error the please issue a
commit:
commit;
If the above sql update errors then issue a rollback:
rollback;
3. When the above sql updates are complete, then query up the purchase
order in theEnter Purchase Order form and resubmit the document for
approval.
Reference Documents
Note 297980.1

Creating parameter based on Submit Date from Remedy ITSM

I am new to creating Crystal Reports and I am using Crystal Reports XI. I am pulling information from BMC Remedy ITSM through an ODBC connection. I have created a report from HPD_Help_Desk that pulls the Incident Number, Submit Date, Submitter, Owner and Description. I am not having any problems pulling the information from the tables. The issue that I am running into is creating a new parameter field that can be used so that when the people that will be running this report can pull information based on a date range of the submit date. When the report is run, it pulls the datetime from Remedy ITSM in a mm/dd/yyyy hh:mm:ss format with AM or PM on the end. I have created a parameter named Date Range that has a static list of values. The Type of the parameter is Date Time. The Value Field is Submit_Date. I have selected true for allowing custom values and allowing range values. The objective is to have the person running the report type in the datetime range such as Start of Range Value: 11/22/2009 00:00:00AM and End of Range Value: 11/28/2009 23:59:59PM so that they get all data for Incidents created from the start of the day on the 22nd to through the end of the day on the 28th providing 1 weeks worth of data. I know selection criteria can be used to run for the previous full week, but this will not help if people want to check on historical data. When the parameter is added to the report, it requests the datetime ranges be entered in a yyyy-mm-dd hh:mm:ss format. I have entered in datetime ranges and it will not filter the data. I receive data back for all dates even outside the range requested. I have attempted to change the format of the Submit Date within the report to match what the parameter is asking for and receive the same results. Any help would be greatly appreciated. Thank you in advance.

Thank you for the feedback Carl. Again, I am new to this, so please be patient with me. I am not sure what you mean about adding the parameter to the record selection formula. I have drug the parameter field into the report so that it will prompt for parameters before running, but I do not think that is what you are talking about. Please advise.
To your question about the Submit Date field in the report, when I open up the report and I point at the field for Submit Date the popup shows HPD_Help_Desk.Submit_Date (DateTime). That being the case, I think the answer to your question is that the data type of the data being returned is DateTime. Thanks again for the assistance.

Hello, I have windows 7, Im getting msvcr80.dll error 7(windows error 126) when I tried to update my itunes. Now it won't open. Does anyone have a remedy? And when I try to uninstall it says that the file cant be found.

Hello< I have windows 7, I tried to install the new itunes version, last night 1/30/14, Im getting msvcr80.dll error 7 (windows error 126). Does anyone have a remedy for this? When I try to uninstall the ituned program it says it can't be found and to make sure I have permission to uninstall.

Same problem today. Took five times to reinstall without any error messages. I did the following:
1) Went to the C:\program files (x86)\iTunes and C:\program files\iTunes folders and moved every file ending in .dll to the desktop (even if two files in same location had the same name, just replaced)
2) Restarted computer and still got error message
3) Uninstalled all apple programs possible in the following order......itunes, apples software update, apple mobile device support, bonjour, and apple application support.....all performed using the microsoft control panel
4) put all the .dll files on the desktop in the trash and emptied (this is a step apple support did not recomment in their posted solutions but for a final try I wanted to delete everything apple).
5) Restarted computer.
6) Re-installed itunes from apple website
No error messages during re-install and was able to open shortcut in one try.

When I am NOT private browsing Firefox will not allow me to delete or change the website address in the location bar. My only remedy is to open a new window and search in google then click the link to that site through google. How can I resolve this?

Question
When I am NOT private browsing Firefox will not allow me to delete or change the website address in the location bar. My only remedy is to open a new window and search in google then click the link to that site through google. When I swap to private browsing firefox allows me to anter the website address directly into the location bar - but this is a slow [prcess to swap back and forth - also by dint of using private browsing I loose my website information.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Is there a way to restrict the number of attempts for a remediated question using advanced actions?

I have the following slides in my project:
content slide 1
content slide 2
question slide 1
question slide 2
Question slide 1 is a question about content slide 1. Question slide 2 is a question about content slide 2. I would like to restrict the total number of attempts to two for each question. If question 1 is answered incorrectly on the first attempt, the learner would be returned to content slide 1 for review. Clicking the next button will take the learner back to the missed quiz question and allow them a second attempt to answer it correctly. If they answer it incorrectly again, it is scored as incorrect and the learner is taken to question slide 2.
Can this be done or does remediation keep repeating until the learner answers the question correctly?
If that is the case, can I achieve my objective by using advanced actions? And, if so, can you provide step by step instructions on how to do this?

I think it could be possible, but giving you step-by-step instructions, sorry, that would take a lot of time. Did you use advanced actions already? My archived blog has a lot of use cases and tutorials, but I think it is not fair to ask on a forum for step-by-step instructions for each use case you want to create. The most important thing will be to make sure that the user always remains in the Quiz scope, you can use the new system variable cpInQuizScope while testing. There is no system variable for attempts on question level, only one on Quiz level, so you'll have to create a user variable to track the attempts on question level. A big problem is that when you leave a question slide, without using the remediation work flow, the attempts are considered as finished. Personally I would prefer for that reason to not use the default question slides. You could try out a combination of remediation and advanced actions, never did test that?
Lilybiri

When plugging in my ipod touch on Itunes, it says this ipod cannot be used because the Apple mobile device service is not started. What can I do to remedy this. This has just started happening suddenly

When pugging in my ipod touch on itunes, it says this ipod cannot be used because the apple mobile device service is not started. What can be done to remedy this? Up till yesterday I have not had this problem

See:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

ORA-00001: unique constraint (REMEDY.SYS_C001727

Hi: I have a simple table with a primary key (ENTRYID). All other fields are just fields with no constraints. When I try to insert records, for some records I get the above error. The table does not already have this record.
INSERT INTO REMEDY.VITALEXCEPTION (ENTRYID, CUSTID, DEVICENAME, INTERFACE, EXCEPTION, DURATION, TIME)
VALUES ('jvis2rspm01.S0/0/0_FMS:65999591 NA:3836400887 TERM:cmny83bbf/20351BDU1182798445', 'fxms', 'jvis2rspm01', 'S0/0/0_FMS:65999591 NA:3836400887 TERM:cmny83bbf/20351', 'BDU', 5476, 1182792934);
INSERT INTO REMEDY.VITALEXCEPTION (ENTRYID, CUSTID, DEVICENAME, INTERFACE, EXCEPTION, DURATION, TIME)
ERROR at line 1:
ORA-00001: unique constraint (REMEDY.SYS_C001727) violated
Could someone help.
Thanks
Ray

hi,
can you post the table structure?
I suspect that ENTRYID has lesser length than the actual value and in effect the value has been truncated for some reason.
The primary key value is too long, maybe creating a surrogate key would help.
J

Unkown error while updating to ios8 or restoring

A few days ago my Iphone 5 screen went black and would not turn on or anything but it would still vibrate and if i held down the home button the little siri sound would go off. This had happened once before a short while ago and i just let the phone die all the way then charged it and it worked fine so that's what i did this time. When it came back on this time though, it was still just black but it would also be flashing the apple logo. I tried a bunch of things that people were suggesting online and watched youtube vidoes but nothing seemed to work, also every once in a while it would go to the lock screen and i swiped and pushed home and stuff and nothing would happen it just said it was searching where it would usually say verizon. Once while the screen was doing this i held power and the home button which is what many of these youtube videos said to do and it worked, telling me to connect it to itunes for the recovery process. Once it was connected to itunes i tried to update it to ios8 and it seemed to be working at first but then it said unkown error and when i tried to restore it the same thing happened, i tried both of these multiple times with the same result. The nearest apple store is an hour away and i don't have a driver license so that's really a last resort for me, i'm hoping someone knows whats gonig on with my phone.

when it provide an unknown error it usually give an error number too

The operation cannot complete because of an unkown error while exporting to png

Adobe Illustrator CS5
Windows 7 64bit
I am getting the following error while trying to export a png
"The operation cannot complete because of an unkown error. [13]"
I tried disabling all startup items, rebooting, copying and pasting to a new document to no avail.
Please help

Here is what I tried and it worked
Save the file as pdf with the "Preserve Illustrator Editing capabilities" checked. Rename the file from .pdf to .ai
New file can now export without any problems.
Wierd. But thanks to everyone who posted

Remedy connector not working with OIM 9.1.0.2

Hi,
I am using the OIM connector, BMC Remedy User Management 9.0.4.12 with OIM 9.1.0.2 BP18 on Weblogic 10.3.2
I have followed the connecter documentation at "http://docs.oracle.com/cd/E11223_01/doc.904/e10422/deploy.htm#BGBIFBHG".
The connecter is installed successfully. The dependency files are placed in the directories as per section 2.3 of the above note. And the Communication between Remedy server and OIM is not SSL.
When I run the schedule task for “Remedy Lookup Reconciliation”, I get the error. I have checked that all the dependencies are in the correct location and the path variables are set properly:
DEBUG,29 Feb 2012 15:03:28,092,[XELLERATE.SERVER],Class/Method: SchedulerTaskLocater /removeLocalTask entered.
DEBUG,29 Feb 2012 15:03:28,092,[XELLERATE.SERVER],Class/Method: SchedulerTaskLocater /removeLocalTask left.
Exception in thread "QuartzWorkerThread-0" java.lang.NoClassDefFoundError: Could not initialize class com.remedy.arsys.api.Proxy
at com.remedy.arsys.api.DefaultProxyManager.getProxy(DefaultProxyManager.java:60)
at com.remedy.arsys.api.Util.ARSetServerPort(Util.java:1461)
at com.thortech.xl.schedule.hostAccess.ReconcileBMCLookUp.connect(Unknown Source)
at com.thortech.xl.schedule.hostAccess.ReconcileBMCLookUp.getLookUpData(Unknown Source)
at com.thortech.xl.schedule.hostAccess.ReconcileBMCLookUp.execute(Unknown Source)
at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.run(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
at org.quartz.core.JobRunShell.run(JobRunShell.java:178)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:477)
DEBUG,29 Feb 2012 15:03:56,337,[XELLERATE.SCHEDULER],Loading Scheduled task class com.thortech.xl.scheduler.core.quartz.QuartzWrapperusing ADP classloader
DEBUG,29 Feb 2012 15:03:56,337,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader entered.
Let me know if you have an idea on what maybe going wrong here..
Thanks.

As per given bug it is looking for jars which is missing
have you install connector using deployment manager?? if yes it copy required jars at target location. verify if not there copy jars in Scheduled Task folder.
Check the document if any external jars required and same put at ThirdParty folder

SCEP2012 Remediation stauts unkown

Similar Messages

Maybe you are looking for