Scess value field is grey out in MIGO while posting rejection excise invoic

HI..
In Return delivery ,i am capturing & posting excise invoice...
The problem is while we can change the values of BED,AED,ECS but the SCESS field is coming grey out.Therefore i cannot change it.
How can we remove the grey out so that we can enter manually whatever amount we have credited.
here the print program is made considering in MIGO we can capture/post excise invoice..
plz reply fast.
Thanx & regards,
Satpal

When it is return delivery tranaction and if you don't select no excise entry system by default captures all data from original document except quantity field and hence all the fileds will be non modifiable. However it is better to select 'No Excise Entry" at the time of Return Delivery and then go for "create excise invoice for other movements" T Code "J1IS" so that you could enter all the duties correct based on the qty rejected in return delivery.
Hope it would suits you.
Cheers

Similar Messages

  • SECess field Greyed out in MIGO

    Dear All,
    I am processing for first stage delear invoice where I need to give the ED values manully.
    I have given for BED, AED, ECS. But SECess field is greyed out (non editable mode) so i am unable to give the value.
    Kindly suggest to make that field as editable so that i can give the value.
    Rgds
    Srini

    No suitable reply hence closed.

  • J1iex-duty fields are greyed out

    Dear all,
    while doing j1iex, all the excise duty fields are greyed out? The quantity field is also in grey in colour. What might be the reason? Please suggest.
    Thanks & Regards,
    AR

    Dear pankaj singh,
    My question is i havent even captured the excise invoice. I did MIGO with only part I. Then came to J1IEX and tried capturing excise invoice. There i find all the duty fields are greyed out. It might be due to some note number. Please suggest.
    Thanks & Regards,
    AR

  • Editing base value or excise duty during Posting of Excise invoice

    Hi,
    System is getting greyed out and not allowing to change the base value or Excise duty values during posting of excise invoice, where as it is allowing during capturing the excise invoice. How to change this?
    We require facility during posting. Is it possible?
    Regards,
    Sattuj

    Hi,
    Please maintain the Assessable Value in J1ID for the material and also maintain the condition records for your excise conditions such as BED, ECS & SHECess in FV11 and try.
    Thanks & Regards,

  • Profit center field is not appearing while posting of customer invoice  and

    Hi,
    profit center field is not appearing while posting of customer invoice in F-02 i was selected profit center field is optional on posting key and field status group level ................
    Can anybody tell what are all new gl Reporting list of transaction codes

    Hi,
    In the F-02 T.Code we cannot find the profit centre for customer line item. We have to attach the profit centre for the other line item i.e income gl account. Due to document splitting system will derive the profit centre and we can see the profit centre for the both line items under General Ledger view.
    Thanks,
    padmaja

  • The movement type 261 is greyed out in MIGO

    HI Experts,
    We have a scenario where we want to use the copy of movement type 261 to post goods issue against a process order. In MIGO even if I change it in the initial screen and execute, system takes only 261. System is not allowing to change it in the tab "Where". The field for mvt type in this tab is greyed out.
    But we have created a movement type to post the goods receipt which is copy of 101. This is working fine. System takes this movement type when we enter it in the initial screen and copies to the tab where.
    How to solve this issue?
    Request your expert advice.
    Regards
    Prathib

    Hi Ajit,
    Thanks for the reply. Here the issue is we wanted to use the customized movement type only for a particular type of order. For all the other order we should use 261 only.
    I dont think this can be done through standard SAP. Is there any user exit or BADI for the same?
    Please let me know.
    Thanks & Regards
    Prathib

  • Fields not greyed out in display mode in screen exit

    Hi all,
    i am working on an screen exit for CJ02 transaction. the values in the customer subscreen are getting updated in database and even it is reflecting in fields when viewed again. the problem is that in display mode (CJ03) the fields are still editable. though there is no save button, but the fields should be greyed out.
    i have tried to modify screen using LOOP AT SCREEN in the function exit provided in PBO.....but it is not picking the subscreen.
    please provide any solution as soon as possible.
    thanks in advance

    In the PBO in your screen exit:
    IF sy-tcode EQ 'CJ03'.
    LOOP AT SCREEN .
    if screen-name 'your field'
    screen-input = 0.
    screen-output = 1.
    MODIFY SCREEN.
    ENDIF.
    endif.
    what enhancement are you using?
    bye

  • Hierarchy Authorization field not greyed out in portal

    Hello Gurus,,
         I have a query,which has profit center as one of the selection variable and which has a a hierarchy on it. The Analysis authorization variable was created for the hierarchy. So it works fine in Bex Analyser,but when the same is run in portal,,, the authrozation field ( profit center) is not greyed out,but the F4 help shows just the authorized values alone ,which is good. But the issue is the enduser seems to be entering values manually,,,thereby the report runs for unauthorized values as well.
    Can someone tell me,,if this could be a bug in sap,,, the field with authorization is
    not being greyed out.,,,,,,,,is there any work around because the user wants it optional,,,,,,,
    This is on 2004S version of BW.,,,,,,,,,,,,,,can someone guide me through this.....
    Just to confirm,,only the nodes show in F4,,but is it standard functionality that the leafs doesn't show up in F4,when a leaf alone is selected as the hierarchy node in RSECADMIN................
    your help shall be rewarded,,,
    thank you in advance..
    srinu

    Hi
    Thanks for ur advice.
    I have tried what you said by activating and Deactivatin the RFC comm channel in ID but the same result.
    I have also checked the Max connections in the RFC channel.
    All in vain
    Expecting more expert suggestions
    Regards
    krishna

  • For Z Po order type - Item category field is  greyed out.

    Hi MM Experts,
    I am an ABAper working on PO creation with respect to PR( PR with account assignment N)  for Z order type . The requirement includes to update item category of PO with B , But for this Z order type both PO transaction Create/Change(ME21/ME22) the field item category has been greyed out ( Non editable). I checked the SPRO setting for this order type ( SPRO-MM->Purchasing-PO->Define Screenlayout at document level .The field item category has been made as optional.
    Please let me know why this field ( item category still showing in display mode) and How to make it as editable .I need it as editable in ME22 to implement the new requirement of updating that field with item ategory B.
    Thanks in Advance
    Pravee.

    Hi All,
    Since I was creating a PO with respect to PR - after running through all the screens the item category field was becoming non editable, But during the create in one of screen the field item category was still editable, so I updated the item category with B during the create and created the PO, I have used BDC to do the same and its working fine. Thanks for all your inputs.
    Thanks
    Pravee.

  • Group asset field is greyed out

    Hi
    I have created group assets. I given tick in group assets in SPRO for determining depreciation area and asset class. In layout, group asset field is made optional. Inspite of this in asset master, then entire tax depreciation area line is greyed out and so group asset tick is also greyed out.

    Hi,
    Suppose if you have created a group asset like XXXX.
    Now you have to enter this group asset number XXXX in the normal assets, for which you want to valuate at group asset level.
    Have you checked in AO21, for the screen layout rules 1000 and 2000, the field Group asset's field status is set to optional or not....
    For normal assets, in dep areas tab, the group asset dep area will always be greyed out. Click on that grey out field and enter the group asset number (XXXX) and SAVE.
    Note: Group asset functionality is to valuate / depreciate the assets in a dep area at a specific group asset level with an higher / lower dep rate.
    This will resolve your issue.
    Thanks,
    Srinu

  • ME57-Assign manually** fields are GREYed out**

    HI Gurus,
    When the user tries to use ME57 transaction to assign the vendor and purcahse organization by clicking on " Assign Manually" the purchase org data has been GREYed out and is not modifiable. What may be the cause for this issue? Has some user setting been maintained? or is it a GUI related issue? Please help.
    Thanks
    Shash

    Hi Shashidhar,
    I am also facing the same issue. Please let me know, how did you resolve this issue ?
    Thank you
    Rudresh

  • Issue of Text input field  in Where Tab of Migo During POST

    Hi Friend's,
    I m facing some issue In MIGO for Test Input field not showing in WHERE tabe during Display-Material  on POST it will showing during check but when i try to post it it will invisible text input field what will be issue..high preiority..
    Regard's,
    shaikh.khalid.

    ok .
    when i go migo and select GR and Purches order.after enter in below WHERE tab there is a text and input field of that when filling this i try to check it showin text and input field during check but once i press POST button and then go to where tab it not showing Text and input field both are invisible..
    1.In MIGO During GR-purchase order in Where tab Text and it’s input field are showing during CHeck tabe
    2.On POST it not showing Text Input Field both are invisible.

  • Audio greyed out after a while

    Hi all,
    Can't seem to find a definite solution to this. When I keep my iMac on for several days going in to sleep mode every time I leave it for the night I end up with a greyed out speaker icon and thus no sound.
    When going into the sound settings and changing between either 'internal speakers' and 'wavtap' it activates the icon again but still no sound. Restarting, unplugging does not help. Plugging in the headphone jack, nothing. out again. nothing.
    One time it worked changing. Now it no longer does.
    Then strangely enough when typing this message I was still using my itunes and playing a songs and suddenly during a song it suddenly started playing again. Definitely some driver issue.
    Anyone a solution that is not about restarting the PRAM?? I mean, there should be plenty of people having this. What is going on? I recently changed to mac it this bugs me a lot.
    Thanks guys.

    Hi,
    Try the following.
    Open windows Control Panel, open Windows Update, select 'View update history' in the left hand pane and then select 'Installed updates' link in the following window.
    Locate update KB2962407, right click it and select Uninstall.  When done, restart the notebook, open windows Control Panel, open Windows Update and select 'Check for updates'.  You'll see the update you just uninstalled being offered again - right click and select 'Hide Update'.
    After this you may or may not need to delete and reload the Audio driver - if you do, the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
    Recovery Manager - Windows 8.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Print out put for miro and incomming excise invoice(j1iex)

    Hi guru's
    my client need print out for miro and incoming excise invoice.Plz help me in configuring them.
    thanks
    with regards

    hi,
    Do check the NACE transaction...
    Message schema is nothing but a program which will come into action whenever there will any need of output...
    So, check your message schema...Define the output type as per your requirement...
    Condition table consist of all those Fields which will be taken into consideration, whenever you trigger the message output...and those fields will be taken into consideration for the req. output...
    Access seq. will provide you the scequence in which the fields are be read and perform an output...
    At last printer determination is main, by which you'll print output...
    hope it helps..
    Regards
    Rahul.

  • Zero BED value when posted J1IIN excise invoice from billing document

    Hi Guys,
    I created VA01, VL01N and VF01. Bed value is showing in VF03 but when I created J1IIN from billing document, BED value is zero. I checked several places like below
    a) Logistics-General > Tax on Goods Movements > India > Account Determination > Specify Excise Accounts per Excise Transaction. Here ensure that for DLFC, necessary Account names are maintained.
    b) Similarly, in the next tab, Specify G/L Accounts per Excise Transaction, ensure that for that Excise Group, relevant G/L Accounts are assigned
    c) Finally, in Business Transaction tab, select Outgoing Excise Invoices where you need to ensure that you have assigned billing type to delivery type and also the default Excise Groups and Series Groups are maintained.
    I couldn't figure it out where the problem is. Please help me where to check and what should be done for this?
    Thanks,
    Manohar.

    I maintained excise defaults for TAXINN, I am maintaining A/R BED % which is coming in billing document but not in J1IIN. When I click on simulate it is giving a popup box saying 'No defaults could be proposed for Excise utilization' and click on continue then it is giving another message saying 'Excise modvat accounts not defined for GRPO transaction and E2 excise group'. Please help me what is it?
    Thanks,
    Manohar.

Maybe you are looking for