Sch lines exceeded

Hello,
We are procuring a Material from third party vendor through Sch agreement. Hence during MRP run Sch lines are generated. During last week's MRP run it MRP has given a error message that "Max.9999 Schedule lines possible in Sch aggreement... item .....". When we analysed the issue and understand that there is a counter in sch agreement which counts all sch lines generated for a particular sch agreement (refer ME39) and when it reaches 9999 MRP run gives error message as above. For rectifying the error we found that following are the remedies.
1) Re-number the schedule lines in scheduling agreement
execute function
2) Aggregate the schedule lines in scheduling agreement
execute function
3) Create a new scheduling agreement item.
I wish to know steps which have to be do in order to re-number SL in SA according to solution no. 1.

Hi Taj,
Thanks for attempting to solve my problem.
I tried program RNEWNUMB in SE38. But it shows "Program RNEWNUMB does not exist". Can you please check the program name? If I made a mistake also please highlight.
Also I got an answer from SAP MM forum. Through ME85/ ME86 we can renumber the schedule line counter number.
Now tell me, how much points I need to give for your reply?
Regards,
R. Srinivasan

Similar Messages

Number of line exceeds in source file by 999 then create another IDOC

Hi
I am working on a scernario
There 3 source files and each file should may have more than 999 lines.
I need to create idoc only for 999 lines so when lines exceeds then new idoc should be created.
Can anyone tell me the resolution for the same.
Regards
Ria

Hello,
Change the FCC configuration.. as described in below.
Record set Strcture : *,999
Record Sets per message as : 1
To eliminate header : Document offset : 1
Try this by putting message protocol as file content convertion.
Thx
Subbu

Connecting the sale order sch line and delivery no

I want to find a delivery no and item no which is created for a sale order-> item no->schedule line. Is there any table which relates even sch lines. I know VBFA is the table but i want in even connecting schedule lines. If we dont have table is their any methods to find it our?

Link: http://www.sap-img.com/
Topic: Free ABAP eBook Download
SAP MM, SD, FI, PS, PP, PM, HR, System Tables
The above table represents a diagramatic presentation of how tables & fields are linbked.
Regards,
Rajesh Banka
Reward Points if helpful.

Sch line qty is "0" in "EKET" table

Dear all,
Recently, we have been migrated from ECC5.0 to ECC6.0.
While we are checking our wekly schedule lines in the table "EKET", we found some of the sch line quantities are showing as "0" eventhough quantities available in qty delivered or qty issued column with respect to the sch line no.
(In ECC5.0, if qty is available in qty dellivered or qty issued column of EKET, then schedule qty will not be "0") .
Pl suggest us if there is any note available to overcome this issue.
Regards,
M.Selvaganesh,

If it is a service PO, then your PO quantity should be only 1.
If it has more than one. Then you can enter the schedule line.
First you have to make the Qty field optional entry from field selection
OLME-Purchase Order-Define Screen Layout at Document Level-PT9F.
Make the Quantity field as optional entry.
You can see one line item comes default in PO schedule line.
Then you can copy the line item to another line item.
Select the line item and then press Schedule line split.
If your system is showing something different, then please post a screen shot.

Flex compilation error: line exceeds 32k span

Hi All,
I am trying to execute my application being developed in VC7.0 (nw04s sneak preview version) using tabbed layers. I have 3 layers and has the following UI components
1 tab/layer: input form
2 tab/layer: table control
3 tab/layer: table control
Following is the error from the source Viewer window
<b>com.myComp.myProduct.8J.Empdetailsview</b>
Error in executing a process for Flex compilation, Error: Branch between 8421 and 41193 around line 0 exceeds 32K span. If possible, please refactor this component.
(E:\usr\sap\J2E\JC01\j2ee\cluster\server0\GUIMachine_Business_Packages\empModel_18608\FLEX_COMPILATION_FOLEDR\AAD8J-generated.as:2188)
Error: Branch between 8421 and 41193 around line 0 exceeds 32K span.
Failed to compile AAD8J.mxml
PS: Initially I had a table and chart controls in my second layer (no 3rd layer then) and got the same error however, after removing the chart contrl, the app begun to run.
Now I added a 3rd layer which has one table contrl only and now the app is not working. I also have eventing between my layers..
Please help
Thanks
Sathish

Hi
The 32k issue id pretty hard to get rid of once it starts, instead of using the 3rd layer, try and create a nested iview, you can also try and use a nested iview for each layer, this is a bit more complicated to do but does seem to workaround the 32k problem.
Jarrod

BOM not copied to sch. line in Sub Contract scheduling agreement in Kanban.

Hi,
We are trying to procure material (A) via subcontract scheduling agreement document using Kanban process. This subcontract material has a valid BOM (say it has child materials B & C). We are working with 'Replenishment element for kanban' model (not JIT call).
When Kanban bins status is changed to empty, a schedule line is placed in the subcontract scheduling agreement. But when we try to view the BOM of the schedule line created (Item -> components -> overview), we dont find any child material (B&C) attached to it. Hence when Kanban bin was changed from RED to GREEN, material movement 101 takes place for parent material (A) but 543 (consumption of child materials) is not happening for child materials (B &C).
Mean while, we created some schedule lines manually in aforementioned SC sch.agreement. When we view the BOM of this manually created schedule line, we can see the child materials attached to it. Hence when bin status was changed from RED to GREEN, both 101 & 543 movements were posted.
Can anyone let us know what needs to be done so that when Kanban bin is changed to EMPTY, it places schedule line in SC sch.agreement along with its BOM (Child material) details?
Warm regards,
Saravana.

Dear Ashok,
Issue: how to make BOM field(Component Part) in PO/ SA field non editable in MM customising. After the PO is saved user can not able to edit the component field in PO or Scheduling Agrreement.
BOM field ( component Part ) is directly dependent on quantiyu of material entered. so once you change the PO quantity the component quanity wil change accordingle,
presently you can not achievev thease
but You can set the release strategy like that Po that it is not changable, doing so u r requirement willl achieve
Hope your query is resolved

PO Sch line & PO Confirmation line appearing in Due list

Hi SNC Expert,
We were working with SAP support for improving performance issues in Quick view and Alert Monitor.
We applied couple of OSS notes and moved to Production in last 1 month. Suddenly, we have started observing in the Due list (in the FTR download file) we are getting the below entries.
ORTYPENAME     ORDERID     ITMID     SDLID
Purchase Order     400699664     10                    1
PO Confirmation     400699664     10                 2 (this line is coming extra now)
In the past we use to see on the Purchase Order line in Due list.    Can you please help me address this issue. Is there any Config or setting that can ensure the Duel list has only line for Purchase Order Schedule line i.e. Request line only..
This is a Production issue , a sincere Thanks in Advance for helping.
Thx
MJ

Jay,
Here's what I feel.
When the fields you want to populate are not on the Idoc you wnat to use, check other idoc types.
If that does not help , then maybe depending on your project you might have to add additional segments with those fields ( enhance the existing orders05 ) and use user exits to populate those segments.
As far as Process code FM etc go, if you don't have the fields in that Idoc , its no use what process code you use.
Also if you do not want to enhance the Idoc type , you can figure out fields which are unsed in your idoc type and use fileds which are similar functionality.
I have used totally different fields to populte data, only make sure there is a document out there ( requirements doc. etc ) which explains the need for this and justifies using different fileds.
Best way to go is adding Z segments to your idoc.
regards

Inbound Proxy - Time linit exceeded

Hi All,
I have a JDBC-XI-R/3 scenario. ABAP proxy is used at the receiver end. My scenario is to create POs from the details present in database. For this a we use a funtion module in R/3.
The problem is there are a large number of records in the data base >100. So the data coming into proxy calls the function module. For some time I can see the msg in queue with status "Transaction Executing". All goes well till this point. But after this, I am getting the error "Time limit exceeded" in queue at R/3 side.
How to handle this. Any help is appreciated.
Thanks & Regards,
Jai Shankar.

Hi Bhavesh,
I looked into the blog. I think my scenario doesnt fit into that.
The msg is SYSFAIL in Queue Status in qRFC monitor after the error "Time limit exceeded". In XI server the msgs are with checked flag. In R/3 they are in green color indicating scheduled. All the msgs goes to scheduled status since the first msg itself is not processed sucessfully.
Appreciate your help.
Thanks & Regards,
Jai Shankar.

Confirmed quantity on sch. line erased when credit block

Hi Gurus,
I hope you can help me. I am creating a sales order on VA01, but when trying to save, it appears the incompleteness log, saying the PR position is missing.
What happen is that due to the credit block, the confirmed quantity on the schedule line has been erased.
I want to keep the credit block and do not erase the confirmed quantity. How can I do it?
Thanks in advance.

The problem was solved changing the incompleteness log for that document class.

Open quantities of a line item in one row

Hi,
i have a scenario related to open quantity for a line item for the schedule line.
i have developed a report and the data is coming perfect accordingly. Now I need to manipulate the data based on some scenario in my final table before displaying it in ALV.
A Sales Order has 5 line item (10, 20, 30, 40, 50).
10 & 20 are confirmed and their qty. on delivery is 0.
but 30, 40 and 50 are On Delivery status as they have qty still on delivery.
line item sch. line    status                 open qty    Conf qty.   On del. qty.
10             1          Confirmed            2                2             0
20         1          Confirmed            2                 2                 0
30             1          On Delivery          3                 3                 3
40         1          On Delivery          2                2                  2
50         1          On Delivery          1                1                  1
now ' If a line item has all of it's quantity on an Open Delivery only show one line in the report ( lines 30, 40, 50)'
also the data related to these line items should also be shown in one line.
I have many fields in my table, the above fields are in between the table.
Any help will be appreciated.
Thanks
Lalit
Moderator Message: Spec-dumping is not allowed.
Edited by: kishan P on Dec 10, 2010 3:17 PM

Hai
Whatever u can use the t.code in that u maintain Header text in header level in the document aslo this is very useful.
Regards
Madhu I

Scheduling Agreement - Automatic Release Individual Schedule Lines

Dear all.
I've create a "LPA" scheduling Agreement and its release type is "JIT". So, I use to ME38 to maintain the individual JIT delivery schedule lines.
The problem I have is this method requires the person to manually release each individual delivery schedule line document on the due date before GR is allowed. Hence, is there a SAP system function that can automatically release any due delivery schedule line document without having to manually track and release using ME38 each day/week/month?
Thanks.
Steven

Hello
use t.code ME84 then system release the sch.lines automatically those maintained with me38.
Laxman

Create dummy schedule line in SO using User-Exit

Hi ,
I have one requirement of adding one dummy schedule line before the normal schedule lines which gets added after ATP check in sales order.
for eg: if for line item 10, system will determine 2 schedule 1 and 2. then i want to add a dummy schedule line before 1.
so it will be like
sch line
1 - Dummy
2 - system generated schedul eline 1.
3 - system generated schedul eline 2.
Please let me know if is there any user excit or any way i can achive this?
Thanks,

HI Soni,
What is the meaning of dummy schedule line.
Regards,
Madhu.
Edited by: madhurao123 on Feb 25, 2011 5:26 AM

Calculate all days in month from schedule line delivery date for 12 mths

Hi experts,
I am trying to solve a problem and would appreciate any help! Im on BI7.
The user will input a date for the schedule line delivery date via a variable.
From this date I need to go forward 12 months exactly and display a key figure (outstanding value) by months but the first and last months must only use the days in that month i.e not the whole month if not selected by the user.
I.e if the user types in 13.05.2008
The display need to show (columns)
May 08 (13th to end of May 2008)
June 08   (All)
July 08    (All)
August 08    (All)
Sept 08    (All)
Oct 08     (All)
Nov 08     (All)
Dec 08    (All)
Jan 09     (All)
Feb 09    (All)
Mar 09    (All)
April 09   (All)
May 09 (1st to 12)
So I neen to restrict the key figure (Outstanding Value) by Schedule Line Delivery Date and display as above on a 12 month forecast basis from the day (sch line delivery daye) entered as a variable by the user.
I also need the first month to only show the dates in the month remaining including the date entered as a variable. The last month must go up to the day before exactly a year in front.
I have created the 12 months as a structure and can include the key figure and the schedule line delivery date. The schedule line delivery date for each period needs to be restricted. How can I do this to achieve the above?
Thanks in advance. Will assign good points for a speedy solution.
Best
Steve.

Hi,
    Check "OVLY" and "OVLZ" and If the sceduling is active for he shipping point /sales document type. Check "OVXD" and see If the Loading time/ Pick/pack time is determined from it. If they are getting determined from shipping point check the shipping point calender in "SCAL" .If it has saturday and sunday as holidays ,then you may have to change them. And check If the customer has goods recieving hours assigned to him (In customer master unloading point). If he has only 5 working days and If he accepts only goods at 8 am in the morining then system would propose like this.Kindly please let me know If you need any more Information on this.
Regards
Ram Pedarla

Schedule line W/O MRP

Hello All,
Can we generate automatic schedule lines for a scheduling agreement from an external system.
we don't use MRP in SAP but we use external planning system which generates Purchase requsisitions as of now, we want to generate schedule lines with out MRP for a scheduling agreement.
Can we call the same standard functional module to create schedule lines.
Your inputs are highly apreciated.
Thanks
Mittu

hi,
There are two ways by which you can create the schedule line from schedule agreement;
1. MRP
2. By directly making the schedule line with respect to the schedule agreement, using the trasaction ME21N....
When you don't want to follow the MRP, then you can go to the ME21N, make the source list as a reference, and enter the PO details, and make the Sch. lines directly....
Hope it helps....
Regards
Priyanka.P

Default category of delivery date in schedule lines

Hi,
When i enter transaction ME38, select an item and click on delivery schedule to input schedule lines,
by default i can see 'M' in field category of delivery date.
'M' is displayed in all the records, whether a sch line exists or not.
In another system of mine, when i try to enter sch lines thru ME38, by default all records show blank in category of delivery date.
I want to change the default category of delivery date as 'D' or want to keep it blank , but not 'M'.
How can i change this???
Regards,
Sneha
Points will be awarded for helpful answers *

Hi w1n,
following is the setting in my system.
EN     C     5     Calendar format
EN     D     1     Day format
EN     K     2     Planning calender
EN     M     3     MONTH FORMAT
EN     P     4     Period format
EN     W     2     Week Format
Still it is showing me M as default in all the lines.
M                 06.2008                  32      R01.06.2008
M                 06.2008                  24      R01.06.2008
M                 06.2008                  24      R01.06.2008
M
M
M
Can u pls help me out ???
Regards,

Sch lines exceeded

Similar Messages

Maybe you are looking for