Schd. for delivery quantity in MMBE - Vl09

Dear
We had one sales order which was having 375 quantity to be delivered. Also the same stock was available in the plant, storage location and batch. So we created delivery order through vl01n. Then for some reason we need reversed that delivery order, so reverse that through Vl09.
And then we changed the quantity to 1 from 375, so we can use it somewhere else.
But now I am creating new sales order with 375 quantity it is not picking in schedule lines. When I check the stock in MMBE it is showing as Unrestricted stock as 375 and schd, for delivery is 375.
In MB5B it is showing that document is revered through vl09 and balance stock is 375, I have also check that there is no open order for that material.
Please help me to resolve this issue.
Thanks in advance,
Sachin

MMBE is not a good t.code check the details. Check using t.code MD04/CO06 to see the stocks/allocation to sales orders/deliveries. Also check by removing the storage location at the sales order line item. If all looks OK, and still the system does not confirm the quantities, then run program SDRQCR21 in SA38 and check again.
Regards,

Similar Messages

  • MMBE Schd. for Delivery

    Hi All,
    Can anyone tell me what determines whether stock appears in the Schd. for Delivery column on MMBE.
    I have a material 1007490 that has stock on a delivery but I can not see that stock in MMBE, while I have another material 1024620 where the stock that is on a delivery does appear in the Schd. for Delivery column on MMBE.
    Many thanks for any help,
    Colm

    I have created an example in our QAS system using the material 1007490 (which is the one not working in our PRD system)
    In QAS, the delivery date is the 17th of Aug while in PRD the delivery date is the 30th of Aug.
    Both materials are setup exactly the same and the sales orders and delivery are setup the same.
    "Schedule for Delivery is after you do a SO or DO and after availability check is done, goods are reserved and are supposed to be delivered to the customer. Especially in a Make to Order u will find SO number against the stock booked. That is basically schedule for delivery."
    When I created my example in QAS there was no availability selection screen. Is there anything else that I should be comparing?
    Many thanks for all your help,
    Colm

  • Block picking from unrestricted use stock when it is in schd. for delivery

    Dear Experts,
    I have 50 units in unrestricted use stock of particular material for a storage location in the plant.  I have made two outbound deliveries for this material.  When I pick 50 units of this material, these 50 units i can see in schd. for delivery and in unrestricted use stock also I can see 50 units  in MMBE.  Now, 50 units are in unrestricted use stock, once again i will be able to do picking of another 50 units of this material from the same storage location. (there is physical variation in stock.)  Now, when i will do pgi for one outbound delivery, the stock from unrestricted use will be debited and system not allow to do pgi for another outbound delivery.  (we don't want to allong negative stock).  Is there any way to block picking of the stock which are in schd. for delivery.  Thanks in advance.

    Maybe you should set proper availability check for your deliveries / materials.
    SPRO > SD > Basic Functions > Availability Check and Transfer of Requirements > Availability Check > Availability Check with ATP Logic or Against Planning
    Here you can carry out of your setings.
    E.g.
    .. > Carry Out Control For Availability Check (transaction OVZ9)
    Here you should set for proper checking group / checking rule combination > "Include deliveries" (V_441V-VBBLP) field should be set.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/93/744b51546011d1a7020000e829fd11/frameset.htm
    Regards,
    Csaba

  • Scheduled for delivery quantity shouldnt be transffered to another plant

    dear all,
    we have a case in which we need to prevent scheduled for delivery quantity from being transferred to another plant.
    the problem is that when creating a sales order and a delivery, and before the PGI,, the system allows moving the quantitity to another plant. and this causes a problem when trying to create a PGI ...
    any suggestions please

    in the checking rule ( if stk transfer, you can get it from OLME> purchase order > create stock transport order ) incude reservations, deliveriies and sales order.
    in assign del type and checking rule, you can find the checking rule used

  • Batch is not captured in MMBE as Schd. for Delivery?

    Hi SD Experts
    Particular batch stock is not captured in MMBE as scheduled for delivery after creating the Outbound delivery.
    Kindly provide some inputs.
    Thanks/Karthik

    Hi
    Thanks for your inputs
    I have tried my best but nothing worked out.
    Development it is working fine and even production system for the same material other batches or working fine.
    Compared the batches but nothing wrong in it.
    Due to this issue batch stock is showing as available stock for other deliveries to pick.
    Planning to apply OSS notes.
    Thanks/Karthik

  • Find the table name for Delivery quantity in production order

    Hi,
    Pls can you tell me what is table name for delivered quantity field in General tab for that production order number.
    With Regards,
    P.Arunkumar.

    Hi
    You can find it GR qty via following 2 Tables.
    Table AFPO Order item
    Field WEMNG - Gr Qty
              Or
    Table AUFM
    Field SHKZG (Debit Credit Indicator ) Select Debit Indicator - S
    Field KZBEW Movement type ind.- Selct F Goods movement for production order.
    Regards,
    Dhaval

  • Table for Reserved quantity in MMBE.

    Hi All,
    In transaction code MMBE, there is field 'Reseved stock'
    Please let me know SAP table& field for it..
    Best Regards,
    Shailendra

    Hi,
    You can take this from RESB table and field name BDMNG.
    MMBE displays the reservation requirement in Reserved field.
    Regards,
    Sunny

  • Scheduling Agreement delivery quantity mismatch

    hi all SD Gurus,
    I've a scheduling agreement with a schedule line for 10 units. when i go for delivery delivery quantity is taken as 351 (as available quantity 694 - scheduled for delivery quantity 343). how can i get exact delivery quantity in delivery.
    also can u guide me for JIT scheduling agreement concepts???
    thanks in adv.
    amol
    Message was edited by: Chittaranjan Nivargi

    For R/3 4.6C see link below
    Ron
    http://help.sap.com/saphelp_46c/helpdata/en/78/2085347860ea35e10000009b38f83b/frameset.htm

  • Difference between open quantity and delivery quantity

    Hi all,
    Please anybody explain me the difference between open quantity and delivery quantity My question is both are same in the value or different I need to report these 2 fields based on date.
    open quantity is available in table vbbe
    delivery quantity available in table lips.
    for open quantity i have one select statement.
    for delivery quantity i have another select statement.
    i want to club these 2 fields into a single report.
    please clarify my doubt.
    regards
    chandu

    Hi,
    Open quantity is nothing but the quantity which we have at the DAY starts.
    Delivered quantity means which was delivered on that DAY.
    So Opening qty - Delivered qty = Closing qty for a DAY.
    Again this Closing qty will be the Opening qty for next DAY.
    I think based on POSNR u need to club both the quantity in single report.
    select vbeln posnr matnr omeng mbdat into itab from VBBE where....
    select vbeln posnr matnr lfimg mbdat into itab1 from lips where....
    loop at itab.
    read table itab1 with key....
    move:....to itab2.
    endloop.
    Thanks.
    I hope this will help you.
    Message was edited by: Deepak333 k
    Message was edited by: Deepak333 k

  • Scheduled for Delivery in MMBE

    Hi All,
    After creating delivery note against STO, the delivery note quantity is not getting updated under the columen "Scheduled for Delivery" in MMBE.   What could be reason.  Kindly suggest.
    Regards
    Alexandro
    Edited by: Alexandro fozters on Nov 11, 2009 12:56 PM

    Hi Alexandro,
    As far as Repleinshment Delivery PGI  is concerned, the stock can be seen only under Stock in Transit ( if two step is activated ) or it will be shown in the Receiving plant ( if one step is in use ).
    Thanks & Regards,

  • NEED VL02N VL09 USER-EXIT FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER

    I NEED VL02N VL09 USER-EXITS FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER POSITIONS.
    F.X: IF POST QUANTITY 10, BUT PURCHASE ORDER POSITION QUANTITY 30, I NEED AT ANY CASE TO SET DELIVERY COMPLETE INDICATOR FOR RELEVANT OUTBOUND DELIVERY AN P. ORDER POSITIONS.
    THANKS/

    Hi Malka,
    It's possible set the system to mark automatically the delivery completed indicator.
    First you need to set the under delivery and over delivery tolerances.You do this in customizing:
    Materials Management under Purchasing -> Material Master -> Define Purchasing Value Keys.
    Once you set this, you can insert this value keys on Material Master Record for the materials.
    When you create the PO with a material with this value keys set the system will check the under delivery and over delivery set on customizing.
    In customizing you also have the option to let the system mark automatically the delivery indicator based on delivery tolerances set.
    In Customizing for Inventory Management and Physical Inventory under Goods Receipt -> Set Delivery Completed Indicator, you can determine for each plant whether the system automatically sets the delivery completed indicator for delivery quantities within the underdelivery and overdelivery tolerances.
    You can test setting the under delivery for 0 (with a warning message) and see if the system will only mark delivery complete only for over delivery.
    You can also work with the following Badi: MB_GOODSMOVEMENT_DCI. This Badi also allows custom logic for setting the delivery completed indicator in a PO item.
    Message: M7 433 (The "delivery completed" indicator is set for the purchase order item)
    Regards,
    Rodrigo

  • Remove Sched.for delivery from MMBE

    Hi Experts,
    We had a delivery document right before PGI but user decided to delete all items. Delivery was saved with no items.
    Now, In the stock overview(MMBE) we are seeing a certain quantity of a material under 'scheduled for delivery'.
    This quantity is not related to any document sales order or delivery note, i have checked VL06p for that batch number and there are none.
    I have checked MD04 but our availability check is 02, so even if i have the quantity as a requirement for this day i have no detail of where it is reserved
    i have run SDRQCR21 program but there is no results for any material.
    do you have any ideas as to where this issue might be coming from or how to solve it??

    Please recheck your delivery whether End user properly deleted it or either just go through VLO3N -Outbound delivery  enter the delivery number & hit enter or go through VA03 T-Code enter the Order no - & go to Environment - Display document flow  & check here you might get the whether delivery document number is properly deleted or not & also determine were you having excess quantity before deleting delivery documents.
    Thx
    Kamlesh

  • Can't change quantity when copy from Sale order for Delivery

    Hi all!
    Can i use authorization for can't change quantity when copy from Sale order for Delivery.

    Tien,
    Approval will not work when you have mutiple rows of data.  You would have to work with SP Transaction Notification
    There has been threads before on the forum on the same topics.
    Block the Quantity in Sales Delivery
    Approval Procedure for chaning quantity in Delivery Document
    Suda

  • Error message for over delivery quantity in case of batch split.

    Hi All,
    System is throwing error message if I try to to enter delivery quantity more than target quantity(order quantity) in case of standard process which is ok but in case of batch split when split line created (9000001 for line 10) and if go to item level in line item 900001 and enter delivery quantity more than target quantity system is giving only information message, still line item 10 is giving error message but line 9000001 giving only information message, user want this to be a error massege as well. Delivery item category for all the line items is same and status B is assigned to over delivery in item category. Is there any standard way of achieving this or do we need any modification, if yes then what user exit need to use.  
    I searched alot about this in last three days but found only one thread which is unanswered, please provide your valuable suggestions. If this problem is discussed already and solved please provide me the link to that thread as I could't find any.
    Thanks,
    Davinder

    Hi
    Still line item 10 is giving error message but line 9000001 giving only information message, user want this to be a error massage as well.
    I think it you can possible to change the Information message as Warning message.
    Please  go to SE91 put the Message Class XX (Ex:V1) there And in No. field enter the message number (Ex: If message no V1293 enter the number as 293)
    AND
    go for
    where used in then select only Program >ok then Program will come select the Program > double click, you will l find the message with the Description.
    Now with help of ABAP with just comment on these both the messages. Afterwards you will get the Error message.
    Hope this will helps you
    Dasaradha

  • Change in delivery quantity for batch managed items.

    30.09.2010
    Hi friends,
    We have activated batch management. During delivery after the batch is determined and if i want to change the delivery quantity say for example from 50 to 30 then first i have to go and adjust the quantity in the batches to toal 30  and then come back and change the delivery quantity from 50 to 30.
    After searching the forum i have found  user exits, but other than the user exits is there a standard configuration wheren if i change the delivery quantity the quantity is adjusted in the batches.   Please advise.
    Regards,
    Udaynath.

    Udaynath
    Did you try working with the batch strategy config?
    Try working with fields a) Over Del allowed, and b) Qty proposal.
    Path: SPRO/IMG/Logistics - General/Batch Management/Batch Determination and Batch Check/Strategy Types/Define Sales and Distribution Strategy Types
    Hope this helps. Let me know.

Maybe you are looking for

  • Adobe Bridge CS 4 missing file properties

    I'm working with photoshop files (CS 4) and a few seem to have dropped some of the metadata from the file properties in the bridge browser. Dimensions, Resolution, Bit depth, and Color Mode are missing, and the Color Space is listed as Untagged, even

  • ABAP-query going in infinite loop

    Hello all, I have one on abap-query in which i am displaying data for delivery details that is table LIKP and LIPS. In this query i also have some code to get the sale order details from the  the delivery details. I have also used one FM module in th

  • Netflix on Charge

    Can't seem to find an Netflix app on the Market. Is it supported on the Charge?

  • CASH DESK RECEIPT PRINTING

    hie gurus im getting an error 'Enter at least one business partner' when i try and print a cash desk receipt n transaction FPCJ. this is the upgrade system im testing however i compared it with the previous one and all forms and payment programs seem

  • How is the com.sap.runtime.logon.par implemented?

    Hi all I want to make some changes to the logon.par file such that if the user authentication fails, I have to fire a custom RFC to check if the user exists in that backend system. First of all, I have no clue about how I am going to implement this.