Schedule a job for traansaction code not for program
Hi All,
I have a TR Code for aprogram with a screen (not selection screen, not an executable program)
Can we schedule a job for SAP TR Code (not for program name);
Can you confirm this please
Iver
Dear Iver,
You intend to execute that SAP Trxn code in background. You cannot schedule a job. Did you think in background who will populate the values in the screen?
Alternatively, you can create a BDC program & schedule that program.
BR,
Suhas
Similar Messages
-
Posting limit restriction ( UpTO 10000) for T Code FB60 - for specific GL
Dear All,
Posting limit restriction ( UpTO 10000) for T Code FB60 - for specific GL
Is it Possibal ?
Any other way to stop Posting Amt more than Rs 10000 ( Ten Thousand)
In specific T Code FB60
Required urgent Help,
Your early reply / solution is expected
Regards,
S KulkarniHi,
Just go to OB28, define a validation (if you do not use one already), define one step, define the prerequisites on BSEG level of the account and define the check.
For example, you can use the validation for the following situation: You want to make sure that postings to the expense account "Telephone costs" can only be posted to the services cost center "Telephone". You can carry out the checks needed for this by using the validation.
Activities
If you want to define new validations, go through the following activities:
1. Place the cursor on a line in which company code and callup point are entered (you can enter company code and validation callup point via Edit -> New entries).
2. Afterwards select Environment -> Validation. You reach the first screen for maintaining a validation.
3. Select Validation -> Create. Enter the required name. After pressing ENTER, you come to an overview screen of the validation activities belonging to the validation.
4. Select Insert entry. On the next screen you can describe a new validation activity. You describe the check requirements and the actual check for this. The syntax to be used for this is described in the online help (F1 help) for the input fields for Requirements and Check. You can also define a message (warning or error message) which is sent if the check is not successful.
If you want to change validations which already exist, proceed as follows:
1. Place the cursor on an already existing entry and select Goto -> Validation.
2. On the next screen select Validation -> Display or Validation -> Change. After pressing ENTER, you get to the overview screen of the validation activities belonging to the validation. If you select Insert entry, you can carry out changes if necessary.
Regards,
Eli -
How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks
Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
iWork > Pages
contenant Templates > My Templates
comme il y a un dossier
iWork > Numbers
contenant Templates > My Templates
Depuis le Finder, tapez cmd + f
puis configurez la recherche comme sur cette recopie d'écran.
puis lancez la recherche.
Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
Désolé mais je ne répondrai plus avant demain.
Pour moi il est temps de dormir.
Yvan KOENIG (VALLAURIS, France) mercredi 23 janvier 2011 22:39:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community -
Table of Contents page numbers works for PDF but not for other formats
Hi,
I followed exactly was indicated here regarding creation of TOC.
http://docs.oracle.com/cd/E10415_01/doc/bi.1013/e12187/T421739T481157.htm
The page numbers generated correctly for PDF but not for RTF, HTML and XLS.
(HTML and XLS are understandably not paginated in nature but why not in RTF?)
Tried to make the simplest example work, with 2 headings each on a separate page. Doesn't work on either MSWord 2003 or 2007.
What am I doing wrong?
Regards,
Jarell
Edited by: Jarell on Jan 11, 2012 8:08 PMHi Kavipriya,
What is your email address? I have attached a file in Oracle Metalink, under SR 3-5172030861. named test_toc.rtf
You may use any xml because the template does not use any dynamic binding of values.
The template is basically 2 pages, the TOC in the 1st page. First TOC item (Heading 1) is in Page 1, and Second TOC item is in Page 2.
So the end result should be (PDF result from BI Publisher):
First TOC Item .................. 1
Second TOC Item ............. 2
But for RTF it outputs:
First TOC Item .................. 0
Second TOC Item ............. 0
And after doing Print Preview (once or twice)
First TOC Item .................. Error in Bookmark
Second TOC Item ............. Error in Bookmark
Hope this is detailed enough to illustrate the problem.
Edited by: Jarell on Jan 17, 2012 10:24 PM -
How can I view the number of tunes in the Library? The number shows for Playlists but not for the total Library.
Hello,
I apologize for submitting this question. Soon after I posted it I saw a similar question that had my answer..
Again, my bad for not looking first.
Ron Morris -
Password works for login but not for the Adobe CC Desktop application
Password works for login but not for the Adobe CC Desktop application
Please refer to http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
ou can try deleting OPM.DB from steps below and try again.
Mac OS: You can locate the OPM.db file in the \User\\Library\Application Support\Adobe\OOBE folder. To access the hidden user Library folder, see Access hidden user library files | Mac OS 10.7 Lion. - http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-f iles.html
Windows: You can locate the OPM.db file in the :\Users\\AppData\Local\Adobe\OOBE folder. To view the hidden AppData folder, see Show hidden files, folders, filename extensions | Windows XP, Vista, Windows 7. -http://helpx.adobe.com/x-productkb/global/show-hidden-files-folders-ex tensions.html
3) update to the latest version of the Creative Cloud app.
Also we would like few more details:
When has this issue started occurring, was this after installation of any specific adobe product.
On which platform are you seeing this.
Also we would like to know if after above steps this issue occurs ever again in future.
You can refer to http://forums.adobe.com/thread/1239510
Regards,
Rajshree -
I talked to your guys yesterday about installing correct version of Lightroom 5 which I legally owned, and your guy provided me a download link (different from Creative cloud account), but somehow it was for Windows version not for Mac version. I would very much like to download a Mac version, so please send my correct web link. By the way my s. number for Lightroom 5 up is [removed], and I also have s.number for 4 up and 3 full.
The latest non-CC version of LR 5 is 5.7.1 and download links are available on the Adobe Updates page:
http://www.adobe.com/downloads/updates/
Both Mac and Win links are there.
If you are asking for a LR 5 CC link, which wouldn't require a serial number, please be more clear about that. -
Creative SB0410 digital out only works for dd/dts, not for stereo or web videos...
Hi all,
Need some suggestions here.
I have an old Creative sb0410 7.1 channel card and after reading few long threads, I am able to output dd/dts via 3.5mm to rca connector.
However, the problem is I only hear sound if the video has dd or dts sound. When I play normal MP3 or youtube videos, there is no sound.
Is there a way to configure the digital out so it sends all sound to the receiver whether it's dd or dts or regular stereo?
ThanksAs a workaround, I used another 3.5mm stereo to RCA adapter on stereo LR output of sound card and hooked to a different input in my receiver.
Problem, is I have to switch input in receiver for non DTS/DD sounds.
It's disappointing that my upscaling dvd player sends all sound signals via coax but this card does not.
Isn't it supposed to send all sound signals via coax regardless whether it is DTS/DD or normal stereo/mono etc? -
POS system reports daily totals for each store, not for each cashier
Hi!
We are implementing SAP Retail (ERP 6.0 EHP4 stack 3), SAP PI (Netweaver PI 7.1 SP 8) and SAP BW (NetWeaver 7.0 ehp1 stack 4, incl BI content 704, SP 3 ) for a client. Their POS system is a 3rd party system, i.e. not SAP POS.
This issue concerns the fact that the POS system reports daily totals for each store, not for each cashier.
At my client, the daily settlements are done for each cashier. At the end of day, we will get cash drawers counted with sum of each tender (cash and checks) at the end of day. In addition, the POS system will send sum of each tender, sum of all sales and sum of different finance transactions made each day. However, this u201Ctotals messageu201D is not sent separately for each workstation, or for each cashier, but rather for each store. So we only gets the totals per store.
Questions:
i) Are the tasks available for comparing totals to the aggregates for POS transaction able to handle u201Cstore-only figuresu201D?
ii) If not, how can we adapt the tasks so they can handle u201Cstore-only figuresu201D?
iii) Can we trigger outbound tasks sending WPUUMS and WPUTAB using outbound dispatcher automatically, or must we run this as a manual task of an employee, after checking that all stores have delivered their totals?
iv) The u201Cstore-only figuresu201D does not include cashier statistics. Do we need the u201Ccashier statisticsu201D as total figures, or can we just populate the BAPI for each POS transaction with data, in order to populate BW infocubes for cashier statistics?
Thanks for any advice !
Best regards,
Oeystein EmhjellenHi Kees ...
Your profile indicates you are running Leopard v10.5.8
You need to upgrade to Snow Leopard V10.6 in order to use the App Store. This is an "upgrade", not an "update".
Make sure your Mac meets Snow Leopard's requirements here.
You must have the minimum of v10.6.6 installed in order to access the App Store.
You can purchase Snow Leopard here > Mac OS X 10.6 Snow Leopard - Apple Store -
IN REPETATIVE AREA ATTER 9 RECORDS, LOWER BORDER FOR 10 RECORD NOT FOR ALL
LOWER BORDER FOR 10 RECORD NOT FOR ALL RECORDS (remaining 9 records)
please clarify as much as possiblehi Uday
you have to tell the subject shart & sweet and give the message according to the subject elaborate and clearly.
then which area do you want to see ?
regards -
My volume controls work and getting sound for music but not for game apps. I did check settings and sound is turned on under notifications and in the app. Any help would be appreciated
Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via control centre : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't controlled via the side switch is controlled via control centre instead : http://support.apple.com/kb/HT4085 -
Disable Control Panel for users but NOT for administrators
I'm unsure why Microsoft has not yet published this information. I'm sure that sysadmins everywhere want more granular control of the control panel besides disabling for everyone or enabling for everyone, which is what it seems Microsoft wants me and
you to do, disable CP for everyone, enable it every time I log on as admin and need to use it, then disable again. Ridiculous.
I am a consultant for a large company and our partners like to take as much control as possible. I do too, for that matter. Last week I began researching how to disable the control panel for everyone except admins. I am operating under
the assumption that non-admin accounts do not need access to control panel and it's better if they don't, especially in a production environment where the terminals the users are operating are mission critical.
Finally, I found the answer. I hope this helps you because it took me 3 days to finally find it. It works. I've tested it with admin and non-admin. The great thing is, you can control any GP setting for non-admin users in this manner,
not just the Control Panel. You could disable any and all functionality not necessary for day to day operations for all your users but still maintain access to everything by logging on as an administrator.
The question is answered here
http://www.sevenforums.com/tutorials/101869-local-group-policies-apply-all-users-except-administrators.htmlDon:
Sorry for the confusion. Not sure why my link is bad and yours is good. They both appear to be identical.
The issue with executing gpedit.msc is that when you apply a setting, the setting is for all users, even administrators. If I want to disable access to the control panel, I do so for admins as well when simply executing gpedit.msc, which means if I
log in and need access to control panel, I have to enable it in GP, do the work necessary and then disable it again (if I remember) when work is complete. A bit of a drag, especially for busy admins and support techs. On the other hand, following
the instructions in the link disables control panel for all users except administrators. So if I need to work with Control Panel as an admin, I've saved the enable, disable steps and don't have to worry about remembering as well.
I hope that clarifies. Thanks for your feedback.
ok, thanks. I re-read the guide one more time and now I understand the logic - it creates a LocalGPO object, when gpedit.msc is launched in this very special way. It's kind of cool, even if rather niche. (I'm assuming that it only works for LocalGP and not
for Domain GP).
I think your original link had a trailing dot, but it's fine now.
Thanks for clarifying - even after all these years, I am still learning new things :)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
WHY FREE ITUNES PRODUCTS ARE AVAILABLE ONLY FOR USA AND NOT FOR OTHER USERS OUTSIDE USA
I am so impressed wit the welcome page saying "Join the conversation. Share tips and solutions with fellow Apple product users from all around the world."
Apple mentioned for their products users around the world but many of their free itunes products are available only for USA and not for the users from the other side of the globe?
Is this Apple a fair and customer oriented company or full of bias and Only money oriented company.
If apple could not make thier other FREE stuffs available outside US territory then better for thsi company to just sell their products in USA. its just so disgusting... If we need a certain apps (FREE APPS) available only for US based users.
If you think US users and other country users are paying the same prices for their iPad 3G/4G WIFI 64GB and iPhone 3G/4G 64 GB like hat I did having the 2 gadgets altogether but my investment ends to disgusting as the apple company cound not treat people equal then..... I want to return all this **** stuffsiTunes for Different Countries
iTunes Store: Which types of items can I buy in my country? -
Validation for tax code not to use
Dear Gurus,
i had done validation for purchase/sales tax code not use while doing transction.
Prerequisite
BKPF-BUKRS =1000
CHECK
NOT BESEG-MESKZ IN ZTAXCODE
Message
you can't use this tax code
i had done this validation for parent company code(1000) but it is giving error for our subsidiary company(3000), though the tax procedure is differnet for both the company taxinj(india) and taxusj(usa). Also the end user is making transction in company code 3000 without tax code still system give him error.
Please advice how to rectify it.
Regards,
Rajesh KHi,
As per my understanding the Tax Code is same but the Tax Procedures are different for the two Company Codes. The solution is to add Company Code 3000 also in the validation Prerequisite. With this it could work.
Regards,
Kiron Kumar T. -
X120e diagnostic BIOS message "for evaluation only. not for resale"
This is just a minor quibble, but when I enable "Diagnostic" messages in the BIOS, I get the following screen:
http://imgf.tw/717745842.JPG
I'm guessing the message "FOR EVALUATION ONLY. NOT FOR RESALE" isn't supposed to be there; at least this was this case for some past Thinkpad BIOSes (http://www-307.ibm.com/pc/support/site.wss/MIGR-59180.html).
Or do I have some super special x120e?
EDIT: My model code is 0596-CTO.
Solved!
Go to Solution.clicq,
How about marking your last post as solved so others can find it easily. Any new posts about the x120e will be helpful for diagnostics.
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Maybe you are looking for
-
error while executing script for sharepoint online (office 365) - the remote server returned an error: (503) server unavailable. I am creating many site collections reading records from sharepoint list using powershell in sharepoint online tenant (of
-
Exchange phone for different kind
I just bought the Bionic a couple days ago and I'm completely dissatisfied with the phone. Can i exchange it for a different phone like the Razr? What is the process of doing this at the store and what time frame do I have to take care of it? Reci
-
How do I get App Tabs to open on the bookmarked location rather than the last visited one?
For example, I have YouTube as an App Tab. Every time I open firefox the last think I was watching on YouTube starts playing again. I would really like to set it so the App Tabs open on whatever page I originally set them for.
-
HT4436 I wish to cancel my Icloud subscription, anyone tell me how to go about this?
I wish to cancel my I Cloud subscription, can anyone tell me how to go about this?
-
Windows 2012 R2 Deduplication Garbarge Collection eats up space
I have enabled Deduplication on a volume and it's running for a couple of weeks now. Backups are stored on this volume and dedup is doing a good job on this data (Weekly full backups + incrementals). But when the weekly garbage collection runs, it cl