Schedule a part of webi report to excel
Hi
I have a requirement , where i have multiple report tabs in a webi document and i want to schedule a particular tab to excel excluding the other tabs while scheduling
Is it possible in BO 4.1?
Any suggestions or Work arounds?
Thanks
Dinesh.P
Hi Amit
steps
create a publication
go to format section
select a particular report tab as you want
Regards,
Jeet
Similar Messages
-
Cells merge issue when extracting webi report in excel format
Hi Experts,
We have some WEBI reports in BO XI 3.1.
The reports have header where we are showing report name and some values which user selects in prompt.
Now the issue is that when we save our webi report in excel format, many cells get merge.
I have read many post on scn which suggest some solutions like changing the autofit width option to no and aligning the header width with colums.
Tried both the option but no success.
Is there any other way to achieve this.
Thanks in advance,
Regards,
RishabhHi,
We managed to find the workaround for this merge cell issue.
Sharing it might be helpful for someone.
- Align the report name and other block in report in such a way that the ends are in line with the end point of any column. The only limitation is that when applying pivot to the excel output we neet to click on any of the ccolumn so that excel identify the data set.
- Second workaround is to break the webi document in two parts report1 will contain the report name and the block to show the prompt values selected by the user where as report2 will contain the table withactual data. The only limitation with this workaround is that when exporting the repot output to excel we will get two tabs in the excel sheet one containing the prompt values and secont tab containing the actual data.
Regards,
RS -
Broad casting Webi report in excel format to different users email ids
Hello,
Seriously looking for the help, please help with the solution for below scenario.
We have a requirement to schedule broadcasting of Webi reports to users email in excel format from infoview. But our concern is how the system takes care of authorizations of users when we broadcast the report to their mail id as excel file.
For example we have one webi report for Finance and there are thousands of users for each department, cost centre etcu2026so how to broadcast the same webi report in excel to different users with only data they have authorized to see. We have committed to client that we can do this with out much massive overhead, please advise what is the easiest way to achieve this. I read something like this can be done using authorization profiles in CMS but creating those many profiles and mapping them to relevant authorizations is not possible as there are thousands of users with different authorization levels. And Client is expecting this broadcasting need to be done automatically with out every time manual intervention.
Looking forward for the prompt reply.
Thanks,
Gani.Please use the Dynmanic Recipients functionality of the Publication.
For this we need to do follow steps.
1) Create the WebI Report that needs to be published(Broadcasted)
2) create Deski/webi report which contains the user details and email id's for publishing main report.
3) Map the properties of souce report with Dynamic Recipient report.
Please refer the user guide for more inforamtion.This helps you in avoiding manual creation of profiles in CMC.
Regards,
Siva
Edited by: Nallamala siva on Jun 13, 2011 8:17 AM -
Down load webi report in excel with images
Post Author: anshubit
CA Forum: WebIntelligence Reporting
Hello Everybody,
I am facing issue in downloading webi report in excel with images.
I am not getting any image in the wei report which are there in ANY part of it . like header, body and footer, but the download for pdf is working fine.
I am using BO XI R2 webi and i need download only to excel with images as per the user requirements.
Please let us know the work around if any.
Regards,
Anshuman KumarHi,
I too had similar issue with Excel report.
Had a discussion with BO tech support, they said it is an issue with Business Objects and it can be fixed in future versions.
Thanks
Phani -
Unable to save webi report in excel format
Hi All,
I have a question. I recently upgrsded my internet explorer from IE 7 to IE 8.
Previously, i was able to save webi reports in excel format without any issues.Even after upgrading to IE version8, i was able to save webi reoprts to excel without any issues for 2 weeks.
Suddenly I am unable to save Webi reports in excel format now.When I select the Save to my computer as Excel option the saving dialog box appears and hangs forever.
Can someone please advise me on this??
Please hel as it is very urgent.Hi All,
Trying to replicate WEBI Excel Download issue.
Operating system : Windows 7
Internet Explorer : IE8 Version 8.0.7600.16385CO.
Jre Version : 1.6_ greater than 1.8 version.
If anybody having above specifications in your machines Please try to save a webi reports to excel format and send me the results. -
Exporting Web Report to Excel - SAPBW_DOWNLOAD
When exporting a web report to excel it uses the embedded SAPBW_DOWNLOAD template. Is it possible to use and assign a seperate template like the one I'm currently using for Workbooks.
--KALHi,
I don't understand what do you mean here. Do you mean we could not reduce size in the first time? We have exactly the same problem and the file size is about 20-40 MB. This size is too big to download by end user. It's excel file with .xls extension. When I open it by Excel and then try to Save As, it try to save as Web Page with *.htm extension. If I resave as a Excel Workbook format, the size is reduced to 3-4 MB. My question is the same as the other folk, how do I save it as Excel format with proper size the first time?
Thanks,
Yujun -
Company Logo went off while exporting WebI Report to Excel in BO4.1
Dear All,
I am working on BO 4.1.
When I am trying to export the WebI Report to Excel, I am not able to see Company logo, had this feature been added in BO 4.1 or not yet?
If available please guide me on how to get this logo in Excel?
Best Regards,
SonalHi Sonal Neema,
Check the below link this will help you to resolved your issue.
http://scn.sap.com/thread/3286244
Regards,
Anish -
Problem in Exporting Webi Report to Excel
Hi,
I have developed a WEBI report in BOBJ 4.1 SP1 on top of IDT Universe and applied Drill Down analysis.
While exporting the WEBI Report to Excel, I'm getting Images in the place of columns where there is no data.
However, images are not getting in the columns where we have data.
Please suggest as this will help me a lot.
Thanks & Regads,
Prasad.Hi,
1) Check if there is any conditional formatting applied.
2) Check in the fomat cell --> Appearance . -
Exporting a web report to Excel
Hi,
When I export a web report to Excel, it works fine. when I resave the same file as .xls file, the excel file size is reduced drastically (less than 1/10).
Why is this happening? Any way to reduce the file size in the first stage, that is down loading to Excel from web.
Thanks
UnniHi,
I don't understand what do you mean here. Do you mean we could not reduce size in the first time? We have exactly the same problem and the file size is about 20-40 MB. This size is too big to download by end user. It's excel file with .xls extension. When I open it by Excel and then try to Save As, it try to save as Web Page with *.htm extension. If I resave as a Excel Workbook format, the size is reduced to 3-4 MB. My question is the same as the other folk, how do I save it as Excel format with proper size the first time?
Thanks,
Yujun -
Generating webi report from excel sheet.
Hi to all.
can I generate the web intelligence report by excel sheets in info view,if yes how can I generate them or any alternative solution exist to this..
please reply
thanks in advanceHi Rajat,
Starting from BOXI R3.0 version, Rich client is used for accessing WebI reports other than Infoview. i.e. Similar to Desk top intelligence, it can be installed in any local machine and using it we can access WebI reports.
If you don't have Rich client then install it in your pc, then start creating WebI reports from excel using Rich client.
Navigation: Open rich client -> select local source(browse to your doucment i.e excel sheet) -> select required tab in excel(for the report) -> ok
Cheers,
Suresh Aluri.
Edited by: Suresh Babu Aluri on Feb 1, 2010 9:52 PM -
Mimes in "Print Web Report with Excel"
Hi all,
i am using the "How to.." Paper to implement the functionality for Printing Web Reports with Excel. I also Modify the Table during the rendering with the Modify Table Interface to set some mimes instead of inidcators in one column. The Export
into Excel Works Fine but after saving that Report in Excel, and reopen it i have
to confirm a Security Dialog / re-login . I think this is because of the mimes which refer to the WAS.
Now my Question :
Is it possible to get a result ( Exported Report into Excel with MIMES ) and avoid
a re login. I mean, to export the Mimes also.
Many Thanks in advance for your Help.
Best Regards
Ali TouzlatziHi Prakash,
Thank you so much for your reply.
I looked for LRSR_XLS_EXPORTF01 under program, I found the program but when I clicked into it, it prompt "there is no object list for INCLUDEs"
We have the export as excel implemented for sure. Do you think someone changed the name, or this name cannot be changed. I am new to ABAP too, but I am a programmer. Can you guide me the best way to trace this program?
Again, I appreciate you help. -
Downloading web reports to excel
When down loading a BW web report to excel using the right click enhanced menu - download to MS excel we sometimes get asked to log onto the BW server again, this doesn't happen on all web reports only some. Why is this, is that a setting we can change so we can turn this off??
we are running BW 3.5When down loading a BW web report to excel using the right click enhanced menu - download to MS excel we sometimes get asked to log onto the BW server again, this doesn't happen on all web reports only some. Why is this, is that a setting we can change so we can turn this off??
we are running BW 3.5 -
Dear BW people,
I tried to use the solution of Tobias Kaufmann to print web reports by means of Excel. When I apply this way of working to my report on BW 3.5, it works just fine. ut... when I do exactly the same on <b>BW 3.10</b> no Excel file is generated (though the HTML report refreshes).
I tried to search a reason for this in debugging mode several times and for several hours and I discussed this issue with colleagues but without any result. Anybody with experience on this topic on a BW 3.10 server? If so, did this work and were some modifications necessary?
Thank you very much!
Best regards,
BartIt seems that the two notes in the requirements part is necessary for our BW3.10.
Still I still have three issues regarding the page setup of a printed Excel sheet. After spending a LOT of time, I was able to solve the problems... Is there a OfficeHTML-BW expert ?
1° I would like to put filter values in the header of each printed paper. The How To document uses this parameter in the @page section:
mso-header-data:"&L&0022Arial,Fett0022&12&G&C&0022Arial,Fett0022&14<&[REPTXTLG]> und
<&[DATAPROVIDER_1/REPTXTLG]>";
Is there a way to replace the queryname () by filter values?
2° On the first page the table has columnheaders (normal), but on the second page these headers are not repeated.
3° Even when I remove the <x:FitWidth>1</x:FitWidth>
<x:FitHeight>2</x:FitHeight> and the use <x:scale>100</x:scale>, the result of the report is ALWAYS printed (fit to) 1 page. Ofcourse the texts are way to small. How can I make sure the report is printed in a normal way?
I hope someone can answer at least one of my issues.
Thanks in advance!
Best regards,
Bart -
Repeating row texts when exporting web report to Excel
Dear all,
When exporting a web report (including a structure/hierarchy) to Excel (via the 'export to excel button), the row texts (e.g. balance sheet texts) appear twice (column A and B)in the Excel result.
When using the web context menu 'Export to Excel' this issue does not occur.
I am using a BW 3.5 system which has been upgraded to support pack 16.
I assume it is the combination of the structure and the 'export to excel' functionality that does not match up, because when I switch off the hierarchy functionality in the web report query properties, the export to excel does not give me any problems.
Does anyone know how to solve this issue?
Thanks in advance,
Arjan.Did you write that software, COTS package called Medgate?
If not then ask that company for support. No one here would know how to fix it. They are using the CR RDC report engine.
Thank you
Don -
Scheduling Error occurred with WebI Reports on SAP BO Edge BI XI 3.1 STD
Hello..
I'm using SAP BO Edge BI XI 3.1 STD.
When I schedule the webI Report on Infoview..
Everytime, it failed..
And setting the date for scheduling, it is needed to reset the data by calendar( ie. 2009. 07. 20. -> 2009.07.20.)
What is the reason of failing schedule in WebI report?
I know it was a bug on BOE XI 3.1 and had fixed with FP 1.x.
But SAP BO Edge BI XI 3.1 has no FP yet...
How can I solve this?
We must use the schedule on WebI reports for start production service on Aug...
Please let me know...
Regards..
Edited by: Choi Min Il on Jul 21, 2009 9:18 AMThans for reply...
The error message is as follows..
Object could not be scheduled within the specified time interval.
Thanks...
Maybe you are looking for
-
I have a one year old Macbook Air 13. I have a brand new 22" external monitor. In turning the Macbook and monitor on, the monitor displays very well, but within a few minutes it begins this incessant blinking (temporary black out of the screen that
-
How to I get Adobe Reader XI to accept links made with Adobe Acrobat XI without asking each time?
-
Problem in implements ADF Faces: Detecting and handling user session expiry
Hello everybody I´m trying to implement a method to handle user session expiry as explained by frank nimphius in his blog. http://thepeninsulasedge.com/frank_nimphius/2007/08/22/adf-faces-detecting-and-handling-user-session-expiry/ I have implemented
-
How to Grow as a Freelancer in Oracle ERP space in next 2/3 Years
Hello Team, Can any one advise - How to Grow as a Freelancer in Oracle ERP space in next 2/3 Years? Which track is best?P2P/OTC/PTM?? Rgds, Rad
-
Hi There How can i read the font color (CMYK values) used on a specik character in a textbox. I have tried using IDrawingStyle (optained from IComposeScanner) and used the style->GetColorUID(kTrue), but i cant get a IColorData interface on this UID.