Schedule a report with the system date imbeded in the file name

Hello,
Could anyone tell me how I can schedule a crystal report with the system date imbedded in the file name (FileNameYYYYMMDD) through BOE? When I scheduled the report through BOE, I gave a file name and selected Attach Date Time, but the file name is coming out slightly differently and with the time imbedded as well (FileNameYYYY-MM-DD-HH-MN I think). Is there a way to change the default system date time format in BOE so that the date stamp comes out the way we want it?
Thanks!

%SI_STARTTIME% will add the time the report ran too.
Adding onlt the date will necessarily have to be done via the appropriate SDK.

Similar Messages

Config sync:error: Folder is no longer part of the system data source or the folder not found

This is the message I am getting when i try to configure synchronization through intellisync in all functions. Any ideas?
Folder is no longer part of the system data source or the folder not found
JT

jtwilcox wrote:
Mail account is MAPI
XP
Outlook 2007
thanks for your help so far!
JT
Hi...
Based upon the folder error, my guess is the Desktop Manager is having difficulty determining your default mail client. I am not sure why but it is easy enough to redo a profile in Outlook just to test this. (Control Panel / Mail)
Of course, I would backup my PST file prior to doing this and then create a new profile and import the PST file into the new profile. Once the profile is running and tested ok, I would again go to the Control Panel / Mail and set the default profile to point to the newly created profile. Then run the Desktop Manager and see what happens....
H.
+++++++++++++++++++++++++++++++++++++++++++++++++
If successful in helping you, please give me kudos in my post.
Please mark the post that solved it for you!
Thank you!
Best Regards
hmeister

How to remove the system data details from the overview tab in crmd_order?

Hi All,
How to remove the system data details from the overview tab in crmd_order?

Hi,
It is a standard functionality. Those information will be very useful when you send a message to SAP.
If you still want to remove them, raise an OSS message.
Regards,
Rajesh Kumar

Display the system date automatically in the parameter at runtime

Post Author: sandeepsanadi
CA Forum: Crystal Reports
Hi,
While running a report, I want to display the current system date as a default date in the "From Date" parameter, without selecting the current date from the calendar.
Please let me know if someone knows how to get this.
Thanks in anticipation.
Sandeep

Post Author: sandeepsanadi
CA Forum: Crystal Reports
No.... This does not work. We had tried this before putting our question on the forum, but does not work.

Want to shedule a report in background with current system date

Dear All,
I want to schedule a report which is having date parameters in the selection screen.
What i want is that , every time in the schedulling period the report should run in current system date only with a variant.
Would it be possible.
Thanks in Advance.
With Regards
Shantanu

Yes possible by 2 ways.
I) This way you can use the current date dynamically
Go to your variants in change mode,
1. Check the box 'Selection Variable' for date.
2. Click on selection variables
3. Choose 'D' for dynamic date calc
4. Choose current date and save.
II)Default it in code
Default sy-datum for the selection variable.
Hope this helps.

In sm30, when save, how to fill the table with the system data in the table

Hi all, in SM30, we have user name and time fields, when we create record, after we click the SAVE button, it will automatically fill the fields with the system data, how can we realize it?

Hi ,
Do like this.
1. Go to SE11 -> give your table name and press on change button .
2.Go to Menu->Utilities-> Table Maintainance Generator , then it will take you another screen .
3.Assign Functin group if already have one , other wise create function group and assign
4.Go to Menu->Environment->Modification->Events , again it will take you to another screen
5.Click on new entries
->Now press F4 in T column . Select<u> "01" - Before saving the data in the database</u> and in form routinue give any name of the routinue like "SAVE_USER_DATA" and press enter then u can see an editor symbol in next column click on that it will take you ABAP editor there type this code .
ztable-username = sy-uname.
ztable-createtime = sy-uziet.
check and activate the code .
With this your job will be complete . Now while entering data just leave columns blank , they will insert corresponding username and time
Don't forget award points if it helps you.
Regards,
Raghav

Schedule Monthly Reports with Dynamic Dates, but also allow Ad-Hoc Running

Post Author: Dan-Mica
CA Forum: General
I am trying to find a way to schedule a report that has an as_of_date, and a start and end date.
When running monthly it will be scheduled to run on the 11th of each month. The as of date will be the 10th of the month. The start date will be the first day of the year and the end date will be the last day of the previous month.
I have written the report using date functions to calculate the correct dates, and this can be scheduled.
Now the users are asking to be able to run ad-hoc versions of the report and choose the dates that they use.
What I don't know how to do is to schedule the job to run monthly as above, but also allow the users to choose the start and end dates and as of dates for the report?
Besides writting two versions of the reports is there another way to do this???
Thanks for the help....

Hi,
U can use Infoset Query for report in HR. T-Codes are SQ03, SQ02 AND SQ01. By SQ03 create user group. then SQ02 -infoset and by SQ01 create reports.
try this. it works.
Regards
Nas

Registering with the WebEx Data Center and the Cisco WebEx Node Management System

Dear guys, ...
Please help,
i want to implement to webex node ASR1000, i have read in "Configuring the Cisco Webex Node for ASR 100.pdf", there is prerequisites to implement it, that is "Registering with the WebEx Data Center and the Cisco WebEx Node Management System"
Can someone tell how to "Registering with the WebEx Data Center and the Cisco WebEx Node Management System"
Are there any step by step documentation to "Registering with the WebEx Data Center and the Cisco WebEx Node Management System"?
Thank you
BR

You should have received a PAK Key with your order. Go to Cisco licensing and enter the PAK Key as this will start the process. Once the PAK Key is validated a screen will be displayed to enter your request for ASR 100 integration. It normally takes a few days to a couple of weeks to get the information back from WebEx needed to configure your ASR.
If you did not get a PAK Key contact your WebEx rep to get the process started to integrate your ASR to your WebEx site.
Hope this helps
John

HOW to schedule a report with Bi Pulisher

Hi,
im trying to schedule a report with bip , the report already exist and it' s OK, but when i schedule it and enter the nessary input data, no output is displayed, what can I do to generate a weekly report in local folder, i don't want to add dilevery destination??
thanks for your help

is there anyone can help me?

How to get the date starting from 1 to the current date from the system dat

Dear all,
Please tell me how to get the date starting from 1 based on the system date
and it should come with respect of time also.
example.
suppose today is 6 Dec, 2006
so ABAP report should find the 1 dec. 2006.
Please help me as soon as possible.
Regards,

concatenate sy-datum0(2) '01' sy-datum4(4) into v_firstdate.
or yo ucan use the fm:
HR_JP_MONTH_BEGIN_END_DATE
usage:
    call function 'HR_JP_MONTH_BEGIN_END_DATE'
         exporting
              iv_date             = sy-datum
         importing
              ev_month_begin_date = gv_begda
              ev_month_end_date   = gv_endda.
Regards,
Ravi
Message was edited by:
        Ravi Kanth Talagana

Conditional Scheduling of report with Prompt values

Hi All,
My requirement is that I select some values in the dashboard prompt and get the report. Is there any methodlogy to schedule that report with having data in report according to
set prompt values on the fly that is dynamically.
We can a link below the report to schedule it but how can we pass the condition parameters? Please help.

Hi Kishore,
Thanks very much for the reply. It answers one part of the question.
I am thinking to put a text property or button below the report and is it possible to attach the report values with current prompt selection and the request is attached to the in delivery content section which means user need not pick up the delivery content only he has to schedule current report only by clicking the link or button? Can I have script for that.
To make it simple If I am the user I would like to see following:
1. I go to dashboard page and select the prompt and get the report result.
2. I have link or button below to schedule.
3. I press the button I go to delivers section.
4. I have current report attached to the delivery content with default selection or current selection.
5. I modify other parameters and schedule.
Please help me.

The system could not calculate the fiscal year start or finish date message

While running the transaction FMO1 and FMOA in funds management we have confronted with the following problem.
Message no. FI 500
The system could not calculate the fiscal year start or finish date.
WE are using year dependent fiscal year and are implementing Funds Management for the first time.
SAP Version 4.0 B
Priority Urgent
For the same problem in Version 4.5 and 4.6 there is a note number 213713 available on service.sap.com.

No, there is no bug.
Those activities that have asterisks (Stars) next to their start or finish dates (despite having no constraints) have "External Early Start" or "External Late Finish" dates, respectively, assigned to them. These dates get imported with XER and represent links to activities of those projects that are not in your database but in the external database where the XER originated from.
To remove, filter out all such activities (with stars) and delete their "External" dates. However, be aware that Start or Finish dates of such activities might change if you delete theire External dates. If getting rid of asterisks does alter your schedule, ask the person who sent you the XER to confirm start/finish dates of all such (starred) activiites.
Cheers

Cannot install AIR application when the system date is set beyond 10/31/2017

I created a native time-stamped installer for an AIR application. While testing the installer with different system dates, I noticed that the installer does not work when the system date is set beyond 10/31/2017. I tested the same with a self-signed certificate as well as a Verisign certificate and found the behaviour to be consistent. Why does the installer stop working after this date?

Thanks very much for keeping this issue alive.
Let me restate the issue:
We have a AIR 2.0.4.13090 sidecar application. Installing the application for the very first time seems to work. Any uninstall or update after that runs into issues on the problematic Windows 7 64 bit machine. The installer logs all point the finger to Windows Installer having problems writing to the temp directory.
We've gone through many, many things trying to resolve this, including resetting administrative access to the temp directory and flushing the temp directory out entirely. I'm reporting this news secondhand, so it's not possible for me to directly relate the exact measures taken, step-by-step. The ONLY thing that reliably worked for running and installing updates on this AIR application was the following:
1) Create a new administrative level user.
2) Log in with that user.
3) Disable firewalls.
4) Run the updater.
5) Log back in as normal user, delete temporary user.
if the user account created in step 1 is not deleted in step 5 and is used to attempt a further update or uninstall, it will fail. This seems to tell me that AIR is able to utilize the temp folder via Windows Installer correctly only once. After that, it dirties this directory somehow and is unable to use/write to it, and subsequent uninstalls/updates fail with error 0.
Again, the failure all show msi issues writing to the temp directory. They result in an "Error 0" alert dialog in AIR.

N82 Self change the system date!!!

Hi to all....let's get to the problem at once....
my Nokia N82 was working flawlessly with the v30 firmware BUT when I upgraded to v31 it started to change the system date!!!!! I've search for a parameter in the menus but .... no such parameter...) it adds 2 days in the system date in many occasions.... I thing this is a mega-bug.... please tell me if anyone else have this problem.

I'm having the same issue, after upgrading firmware to v31.0.016 the system date "jumps" two days forward every morning if I set a workday-alarm and then switch off the phone. After the alarm rings I turn on the phone and it shows the correct date, but a few minutes later it jumps 2 days forward.
Because of this bug all of the services connected with system date (agenda, calendar, alarm, memo, reminder, calls register, ...) don't work correctly and are almost unuseful unless you manually correct the system date every morning.
I'm not going to leave the phone on (not even in offline mode) all night long as a workaround, because I paid lots of money for a working smartphone, and it's not working correctly now.
I reported the issue to Nokia, I'll let you know if they will suggest any solution.

Crystal Report with text(csv) data file, can we set it as input parameter?

Hi,
I am a new user of Crystal Reports 2008.
I have created a report with charts in it. The input data comes from a csv text file.
Can I set the name of this text file as an input parameter?
as I need to generate 44 similar reports with different text filenames(and data)?
Thank you.
Regards

Brian,
Thanks much.
I did exactly what you said.
Just to see any change, I first gave a bad report file name just to see if I am accidentally pointing to a different file,
but I got an error saying report not found.
Then I renamed my original datafile name and generated a report and it still generated one without giving an error.
Then I also gave a junk name to the logoninfo and printed that name, the new name was assigned to logoninfo, but the code did not error out.
It ended up generating the report.
Now here is what I think is happening,
1) The save data in report option seems to be still on even though I have turned it off in 2 locations
a) file -> Report Options
b) file -> Options -> Reporting tab.
2) For some reason the logoninfo is getting ignored as well.
Since I did not see any answers yesterday I posted a link to this thread on the .Net forum
Crystal Report with text(csv) data file, can we set it as input param? C#
and Ludek Uher says that I am connecting to the text file via a DAO database engine and so need to use the same code for changing the text file as for changing an Access database.
But the link he gave me tells me to try the same thing that we have been trying..
Here is my plan,
1) I will first try and find out why my save data with report option is still on ( but it shows off in Crystal ).
2) why is LogonInfo getting ignored.
Meanwhile any suggestions from anyone are welcome.

Schedule a report with the system date imbeded in the file name

Similar Messages

Maybe you are looking for