Schedule adhoc query

We want to use Personal ids to record work permits. In this infotype you can enter a valid to date.
Can we create an adhoc query which can select all data where the valid to date is within the next 90 days ?
Can we schedule this adhoc query so that it runs nightly and sends the report to a given email address?

Hi,
For this you have to use background job processing and workflow..
Regards,
Kapil Kaushal

Similar Messages

Logical database in adhoc query

Hello All,
Can anyone tell me what is the logical database in adhoc query?

Hi
When you create a query , you have to select an infoset. Infoset can be considered as a source from which data is populated in the Query Fields.
Infosets are created from Transaction SQ02.
There can be four methods through which an Infoset can become a source of data:
1. Table join ( By joining two or more tables from Data dictionary)
example: Joining tables PA0001 and PA0006 on Pernr to get a one resultant dataset
2. Direct read of Basis Table ( Like PA0001 as a source for data in Infoset )
3. Logical Database ( A Pre-written Program by SAP that extract data from clusters, tables taking care of authorizations and validity periods)
Example : Logical database PNP, PNPCE (Concurrent Employement),PCH ( LDB for Personnel Development Data)
Custom Logical DBs can be created in T_Code SE-36.
4. Data Retrieval by a Program ( Custom code written by ABAP developers which will collect and process data) . This program has a corresponding Structure in data dictionary and the fields of this structure will be used in query)
Reward Points, if helpful.
Regards
Waseem Imran

Issue in adhoc Query

Dear All,
When i am running adhoc query for a particular infotype iam getting fine.
My issue is iam not getting the start and end date of the record.
can any body help me out how to get the start date and end date of each record.
Thanks in advance
Regards
Ananya.K

Hi,
If you want to add the dates to the output of the querry, While creating/editing the query, you should add feilds ENDDA and BEGDA for the infotype to get the start and end date correct.
If this does not answer your question, could you explain your query in detail?
Thanks,
Dhiraj

Problem in Adhoc Query's set operation functionality.

Hi Experts,
I am facing problem executing Adhoc Query's set operation functionality.
In Selection Tab, following operations are performed :-
Execute a query and mark it as 'Set A'.(Say Hit list = X)
Execute another query and mark it as 'Set B'.(Say Hit list = Y)
In Set operation Tab, following operations are performed :-:-
Carry out an Operations 'Set A minus Set B'.
which results in Resulting Set = Z.
Transfer the resulting set 'in hit list' and press the copy resulting set button.
In Selection Tab, Hit list is populated with Z.
And when output button is pressed, I get to see 'Y' list and not 'Z' list.
Kindly help.
Thanks.
Yogesh

Hi Experts,
I am facing problem executing Adhoc Query's set operation functionality.
In Selection Tab, following operations are performed :-
Execute a query and mark it as 'Set A'.(Say Hit list = X)
Execute another query and mark it as 'Set B'.(Say Hit list = Y)
In Set operation Tab, following operations are performed :-:-
Carry out an Operations 'Set A minus Set B'.
which results in Resulting Set = Z.
Transfer the resulting set 'in hit list' and press the copy resulting set button.
In Selection Tab, Hit list is populated with Z.
And when output button is pressed, I get to see 'Y' list and not 'Z' list.
Kindly help.
Thanks.
Yogesh

Problem in adhoc query

Hi All,
This is regarding a problem in the adhoc query.
For one adhoc query in the selection field only personnel number is there. The adhoc query selects from 0022-infotype.In this case if the reporting period is ALL, all infotype records belonging to 0022 infotype are selected. Even if the end date of the infotype record is less than the initial date of Org.assignment.
For the second adhoc query in the selction field only
personnel area is there. In this case the adhoc query doesnot select infotype record belonging to 0022 infotype
if the end date of the infotype record is less than the Org.assignment.
Can anyone explain me this strange behaviour.
Points will be rewarded.
Regards,
Aravind

Some more additional info about the problem.
Suppose in the selection screen there are 4 fields
Company code, Personnel area, Personnel sub area and Personnel number.
If you fill both Personnel subarea and personnel number,
data record belonging to education infotype but whose end date is greater than the start date of Org.assignment
infotype is not selected.
But if you fill only personnel number the same data record belonging to education infotype is shown with blank values for Org.assignment.
I tried debugging and found out that in the first case
since there is no Org. assignment record for the time period of the education infotype nothing is shown.
In the second case, it is allowed to be shown with blank values for Org.assignment.
Any explanation for this behaviour?

Additional field in adhoc query

Hi all, I need to be able to report on the IT105 subtype 0001 system ID for employees who are withdrawn from the company, however, when someone leaves their IT105 record is delimited so adhoc query will not output anything. Has anyone coded an additional field that will look at the latest record regardless of the date?
If you have, please can you share the code with me!?
Many thanks!

Hi Tanya ,
Please find the code below. It is designed for additional structure z105_last which is bassed on P0105 type.
data l_it_p0105 type standard table of p0105.
clear: l_it_p0105, z105_last.
call function 'HR_READ_SUBTYPE'
exporting
    tclas                 = 'A'
    pernr                 = peras-pernr
    infty                 = '0105'
    subty                 = '0001'
    begda                 = '18000101'
    endda                 = pn-endda
tables
    infty_tab             = l_it_p0105
exceptions
    others                = 1.
if sy-subrc = 0.
describe table l_it_p0105.
read table l_it_p0105 into z105_last index sy-tfill.
endif.
Regards,
Sergey

Blank entry in adhoc query

Hi All,
Im have created a data source with table joins T001W and T134M.
Filed MANDT has been maintained when the join condition has been established at Data source level.
Adhoc query in business rule identifies the deficiency. But some filed in the result has blank entry.
Attached the screen shot for your reference.
Can you please let me know, how to fix the blank entry issue.
Thanks
Ashok S

Hello Ashok,
In this case, you have foundation and plug-in in both systems. I assume you have set data source and business rules in GRC system, am I right?
If this is the case, you might have several problems as before SP 10 for GRC 10.0, backwards compatibility was not implemented yet. It means that you must follow SAP note 1352498 in order to synchronize your systems.
If this is not the case, have you checked these values in SCU3 in ECC system?
Best Regards,
Fernando

Can we call a function module in ADHOC query

Hi
Can we call a function module in ADHOC query if yes how.
Also we ned to know how to call a function module in SAP query.
An early responce is appreciated.
Thanks and best regards
Rajeev

Okay as far as I understand your aim is:
To fill a field in the output list with a value that is based on the current line information and calculated by a function module
So go to SQ02 and create an additional field in the InfoSet.
You can refer in the coding to the technical names you can see in the left tree window like P0000-PERNR.
More information is avaiable in the Help part look for additional field in SQ02.
Regards,
Michael

System unable to read table in Adhoc Query

Hi Experts,
I am trying to extract a report based on Infotype 0022 through Adhoc query. Even after maintaining data for IT0022 for a few employees the system is unable to read the educational details of those employees.
I am unable to trace the defect . can anybody please tell me what could be the reason. I have checked the table PA0022, there the data is been stored.
Thanks & Regards,
Smitha

Hi paul and experts
actuall im reading data from 0022 infotype . im using macro
rp_provide_from_last p0022 '11' pn-begda pn-endda.
no data found for this.
but in pa30 for that particular employee data is there.
please help me out of this.
thanks a lot

Problem with a Currency field in Adhoc Query - HR

Hi,
I have an Adhoc query that uses Custom infotype fields (Z infotype and z fields).
The currncy field also has a reference field in the infotype (of type waers).
Wehen we try to get the ouput of the Adhoc Query it gives following error:
The report cannot be generated because the internal description is invalid or incomplete, or because the selection screen is too large.
Regenerate the assigned InfoSet, and read the log. If the InfoSet is OK, make sure that at least one field is given as output.
If you used the 'Refresh' icon to start the query, use the 'Output' menu option to execute the query. This gives you a full screen display of the data.
If an output was generated, the query cannot work with actual data in the construction view. In this case, always use the 'Output' function to execute the query.
I have already tried a number of solutions:
1> Regenerate the infoset...
2> make the field as an additional field and write my own code for it (the error comes before the code as i kept a breakpoint but it stopped before that)
if i add other fields of this infoset instead of this field, then those appear in the output.
Any solutions ??
thanks in advance,
Anuj

Hi,
Is the problem not clear or no one has an answer?
Please reply with some suggestions..
Regards,
Anuj.

How to enter /559 in Adhoc query?

How can we enter Secondary wage types in Adoc query? Step by step

Hi,
You can download the Employee wise Bank Details of IT0009 or using Adhoc query
You have employee wise WT reporter
Now do a Vlookup with the Employee Wt report and the Adhoc query.
If you have problems in vlookup
pls send both the files to me on hemant.mahale capgemini com
Regards
Hemant V. Mahale

Entry date not proper in adhoc query

Hi,
Entry date field in action infotype ( in the adhoc query) always returns 00.00.0000. Whereas the standard reports brings the entry date properly (This is from prelq.hiredate). How we can bring the values into this particular field.The feature 'ENTRY' returns DATYP but data is not maintained in IT41. System should bring the hiring action date (0000 start date) as the entry date. We want to use this entry date field in the adhoc query.
Thanks in advance.
Sreeja

Hi Sreeja
Please read the following paragraph of the consulting note 508026 :
"Exception:
If the query is started with a key date selection, the query calls
function module HR_LEAVING_DATE with the key date and not with the start
and end date of the personnel action in which the key date exists. You
can use modification note 562031 to change this system response."
Please also make sure, that the corrections of note 561514 are contained in your system.
I hope that this information be useful for you.
Regards,
Jun

How to track changes in Adhoc query?

Hi all,
We have requirement for retrofitting the changes done in one Server to other, in the process the Changes in New server should not be overwritten.Currently for Adhoc queries - we're downloading from one server- loading to the New server.
Is there any way to track the changes in Adhoc query to avoid overwriting the changes.
Thanks in advance.
Harika.

Hi,
You can download the Employee wise Bank Details of IT0009 or using Adhoc query
You have employee wise WT reporter
Now do a Vlookup with the Employee Wt report and the Adhoc query.
If you have problems in vlookup
pls send both the files to me on hemant.mahale capgemini com
Regards
Hemant V. Mahale

Can we show comments in adhoc query?

Hello All,
       Can we put comments in Adhoc query?
       I have a comment icon in infotype 9903.
       I need to fetch that particular comments and show in a query output. It is not a field.
       Can we do this? If yes, then please let me know how?
Cheers,
Darshna.

I did it sometime back. A bit complicated process.
Create an infoobject, manually enter the values "keyfig1" and "keyfig2".
Include this infoobject in the filters and restrict it using a "ready for input" variable.
Now create two formula variables.
Write a customer exit such that when you select "keyfig1", first formula variable's value should be set to 1 and other one's to 0.
Then in the query create two calculated key figures, multiply both with the formula variable. Also supress column (all active value == 0).
Then it will show the key figure which you have selected.
Pravender

Book mark icon in Adhoc query?

Hi,
There is an Adhoc query created by the end user.The book mark icon available is not working but the CONTEXT MENU on any of the values is producing the book mark properly.Can just any one help me to find the solution of this?
Why BOOK MARK ICON is on

Vasu,
then there seems to be some issue with your ad-hoc template - was it modified in any way ? that could be causing this issue. If the temnplate was not modified then reactivate the same from business content and check.
The ad-hoc template depends on your BI version. Which version of BI are you on ?
Arun

Schedule adhoc query

Similar Messages

Maybe you are looking for