Schedule agreement-JIT and creation profile (are necessary to maintain)

Hi Friends ,
I am doing schedule line agreement in this way.
1) Create SA agrement -ME31L
2) Maintain schedule lines -ME38
3) MIGO-
4)MIRO
That is working.
A ) But then why it is necessary to maintain in material master under purchasing tab- JIT
and
B) in vendor master -Creation profile
Please can u explain me A and B
Regards,
Mahesh.

Hi Mahesh,
Maintaining JIT in material master is necessary only if you wish to Use JIT scheduling agreement schedule lines, if you are fine with only FRC schedule line, then you don't need to update this field. This is a control on the material level, like you know if a certain material can't be managed on a JIT level then you will not use it, so JIT agreements can't be created for it.
I don't feel Creation Profile is mandatory for vendor master, because you can opt to enter the creation profile in the Scheduling agreement additional data. Creation profile basically has a lot of control function, here isthe abstract from SAP Help
The creation profile determines:
    Which event triggers the creation of a scheduling agreement release (changes involving the lines of the overall schedule and/or the reaching of the next transmission date)
    How the delivery dates are shown (aggregation and release horizon)
    Whether Backlogs and Immediate Requirements are determined and shown in the scheduling agreement (SA) release
    Whether a tolerance check is carried out for SA releases that are created due to changes to the overall delivery schedule in the system
Regards
Chandra Shekhar

Similar Messages

How in scheduling agreement GR and payment is done

how in scheduling agreement the GR and payment is done or on what basis payment is done?

Hi Rajkiran,
Delivery dates and quantities are part of the purchase order terms.
As soon as GR is made, vendor account is credited.
In MIRO (LIV), vendor is paid depending upon, delivery date, price matched and quality approves the item.
Cycle in case of scheduling agreement is the same as standard purchase order.
Best Regards,
Subha
Pls grant me points if found the above info useful

Scheduling agreement JIT

Hello Experts
If Scheduling agreement is released JIT does still able to release before after the delivery date ? any restriction.
JIT is only for customer to notify the delivery date or on time ? or else back our own system also get restricted ?
thanks
MM

JIT is short term requirement and should be released well before delivery date as agreed with supplier.
[JIT|http://help.sap.com/SAPHELP_470/helpdata/EN/75/ee0fb555c811d189900000e8322d00/content.htm]
Edited by: Karthik on Aug 15, 2011 11:10 AM

Schedule agreement,PO and MIRO

Hi All,
Kindly let me know where do we maintain the settings for copying price,etc from PO or schedule agreement to MIRO
*Locked - same question is asked here:
price diff in schdl agreement and MIRO
May be unlocked after clarification*
Edited by: Csaba Szommer on Mar 31, 2011 10:52 AM

Hi,
Please could you elaborate your requirement?
Do you want to know how the Price will flow in MIRO??
Whenever you create PO system fetch the values for that combination of material & vendor through Access sequence which is assigned in the condition type such as PBOO.
Each condition will have valid condition record in the table which system pickup put in PO.
When you are doing MIRO with reference to either Delivery note or PO system fetch all the condition values in to MIRO screen which as SAP standard setting & behavior
If any values which is not appearing while you are doing MIRO, please check for that condition type
Rg

Scheduling agreements with time-independent cond are not supported - Error

Hi All
Processing IDOC IDOC_INPUT_PURSAG_CREATE for schedule agreements.
the BAPI BAPI_SAG_CREATE is being called internally to create schdule agreements.
I am using this BADI ME_PROCESS_OUT_CUS to update the field EKKO-STAKO for time dependent condition.
I need to update the value EKKO-STAKO = 'X' inorder to get IDOC posted.
The value 'X' which I update in this class is not getting populated in the subsequent include LMEOUTP07.
I am using this class IF_EX_ME_PROCESS_OUT_CUST~OPEN to update the field EKKO-STAKO. This is the class which is getting triggered before the below mentioned error code.
Pgm Code:
    IF l_context->header_new->header-stako IS INITIAL.
system supports documents with master conditions only!
      mmpur_message_forced 'E' 'MEOUT' '019'
                      l_context->header_new->header-bsart '' '' ''.
      re_valid = mmpur_rule_invalid.
    ENDIF.
It wld be helpful if anyone suggest to update this field.
Thanks in Advance

That's interesting. I bet that helps other Safari users!

Scheduling Agreement JIT / Forecast calculating wrong

Hello experts,
I´m with a problem with JIT / Forecast.
The forecast are calculating wrong values. For example:
Cumulative quantity calculated: 584
JIT schedule:
DATE             TIME         Order Quantity       Cml. released quantity        Open Quantity
06.01.2012     00:00     32          32
10.01.2012     00:00     352          384
13.01.2012     00:00     128          512
17.01.2012     00:00     88          600              16
Forecast schedule
DATE             TIME         Order Quantity       Cml. released quantity        Open Quantity
20.01.2012     00:00     112          112
24.01.2012     00:00     224          336
27.01.2012     00:00     128          464
31.01.2012     00:00     200          664
The values of forecast are calculating by Cumulative quantity calculated that is 584 and I dont have any Open Quantity and in this case I need to have Open Quantity in Forecast.
The forecast must not be calculated by the amount in transit
Help me.
Tks
LFC

Hi ashish
Check the planning delivery schedule tab and go to item data -> delivery schedule header and check wheather any proper information has been filled or not
Regards
Srinath

Document date and creation date are diffrence

dear all,
please tell me the why are the document date and created on date.
like customer code is created on 12.11.2011.
but sales order created on 12.10.2010.
what is the diffirence of above the issue.
please solve the problem.
rajiv kumar

Hi,
The absic difference is,
Document Created Date: The date on which the document was created by the user in SAP.
Billing Date: The date on which the invoice was created. For example, the user maybe entering the invoicein SAP on 1st december. But in reality the invoice was issued on 30th Nov. Due to some holiday or some reason the user was not able to create on 30th nov and creates it on1st dec. So he makes the invoice date as 30th nov and the document creation date would be 1st dec by default.
Let me know if this explanation is still not clear.
Regards,
Rohan Gudavalli.

Camera Profiles and Lens Profiles are missing in ACR 8.2.

Yesterday I tried to install a new update for CS CC, but it failed. Then I uninstalled the app completely, and installed it again.
When I opened ACR 8.2 I found out that there were no Camera profiles and LensProfiles (as it used to be before). Instead of usual Camera Profile was Matrix. There were no Lens Profiles in Photoshop Lens Corrections either.
The folder C/.../App Data/Roaming/Adobe/CameraRaw/LensProfilesDefault was also empty.
I reinstalled the application a couple times with the same result.
How can I fix the problem?
Regards, Yulia

Well, C:\ProgramData\Adobe\CameraRaw\CameraProfiles\Adobe Standard is also completely empty.

The mobile and tv profiles are not supported

Some how from the Adobe Air site I had the impression that Adobe was focussed on HTML5 + CSS + JavaScript for the mobile market. I have a simple HTML5/CSS/JS code that only needs 2 Flash objects to play an .flv and another to play a simple .swf annimation. I wonder if I can package that code with the Air SDK to reach the mobile market and desktops?
But then I read the subject disclaimer in the fine print of this doc. Creating your first HTML-based AIR application with the AIR SDK
So will my code that uses HTML5/CSS/JS and 2 swf's built with Flash Pro 8 work with the AIR SDK to reach ios and Android devices??
If not can I put the code inside of another adobe tool to package it for mobiles and deskstops? What tool(s)?
Oh, I do need to record some voice, too.
Many thanks!

As long as you have a Superdrive or an external burner/drive, burning, watching, installing, etc. from CD or DVD will work just fine. And so will sharing.

Creation Profile In SA (Sceduling Agreement)

Hello Gurus,
How do i make the field "Release Creation Profile" of a SA mandatory.
Field name is EKPO-ABUEB.
I could not fined under as recomended by sap documentation.
Sap documentation is as follows.
"SAP recommends defining the Creation profile field as a mandatory-entry field (in Customizing for Purchasing: Scheduling Agreement ® Define Screen Layout at Document Level)"
Best Regards,
Itzik Eshed

hello,
There is no such functionality for "define screen layout"...
Release creation profiles are maintained here and shd check the settings here:
SPRO> MM-> Purchasing --> Schedule agreement --> Maint. rel. creation profile for the shc. agre w. rel. doc...
Pls check..
Hope it helps..
Regards
Priyanka.P

SCHEDULING AGREEMENT AND SCHEDULING LINE CREATION

Hello Guys,
I trying creating a scheduling agreement(SA) for vendor & material combination.
I have created a Scheduling agreement in ME31L then maintained in ME38.
In ME38 i have also mentioned the delivery date. when i am checking EKKO for Purchasing document , its created with the delivery date specified.
My question is how to create a schedule line ? Do we need to maintain a source list of that material, plant and vendor.
If we have the source list maintained, then what is the next step after SA is created and maintained.
Do we need to do MIGO? because i tested by creating one SA in ME31L and maintained in ME38. I mentioned the delivery date as today and when i checked EKKO table the Purchasing document is created.
Do i need to create a Purchase Order?
If no then do i need to do MIGO? If i need to do MIGO, for what reference do i need to do MIGO???
My client never maintained a Scheduling agreement, they want the scheduled lines to be created and sent to vendor and we need to receive the goods on specified delivery date.
Help will be appreciated.
Thanks.

Hi,
You need to make a distinction between the scheduling agreement (ME31L/ME32L) and the delivery schedule creation (ME38/ME84)
With ME31L you create the scheduling agreement. In the scheduling agreement which is created for a vendor you maintain the parts that you will order at this vendor, the target quantity that you will order over a certain period and the price.
In ME38 you use the scheduling agreement number that is created with ME31L to create schedule lines (manually). These schedule lines consist of a date and an quantity. This is the data that needs to be transmitted to the vendor and against which the vendor is shipping the ordered materials.
Once the vendor ships the materials you post the goods receipt in Migo against the scheduling agreement number.
That is the basic working of the scheduling agreement and the delivery schedule.
Now some remarks.
You need to set-up the required output conditions for transmitting the data to the vendor either via print, fax, email or EDI.
You can do this manually in each scheduling agreement and each release but typically you maintain the output condition records.
For scheduling agreement contract (ME31L) you use transaction MN07.
For the delivery schedule (ME38/ME84) you use transaction MN10.
In order for you to be able to post the goods receipt the delivery schedule needs to have been transmitted otherwise you will get a message that not requirement are found when trying to post goods receipt.
Also the goods receipt can only be posted if the requirements are valid on the day that you are performing MIGO. This means if you would post GR today then the open requirements in the scheduling agreement need to be for today or already from previous dates. The system will not allow you to post GR for quantities that are only due tomorrow (if this is required a user exit needs to be set-up).
If you want schedule lines created via MRP then you need to set-up a source list using ME01. You have to make sure that the MRP key is set to 2 in orer for the system to generate schedule lines and you also have to make sure that you have the correct MRP parameters set-up.
You can use ME84 to transmit the delivery schedule lines generated by MRP if no changes are required. With the ME84 you can transmit multiple releases at once, however this transaction can not be used to make manual changes to the MRP proposal.
The scheduling agreement offers lot's more possibilities but the above should get you going with the basics.
Hope this will help you on your way.

Next JIT schedule date in Schedule Agreement

H, This is reg JIT - in Schedule Agreements
JIT schedules are created to day 10.02.2010 ..
In Creation profile for JIT, 'Changed or next date' is given & 'Weekly trans' option is chosen
I could see system calculated 'Next JIT sched' date as 15.02.2010 [Next week monday] , it is as expected
I created JIT today and i am not able to release today itself as part of testing solution. Even in production environment cant i release on same day of JIT schedules creation? why so ?
Help Says only those scheduling agreement items with respect to which the creation date is earlier than the current date are chosen for release generation."

I found the issue ...
output message for JIT was an issue
when i see JIT out message type properties for this message, Print parameters field was set to blanck
When i chenged to Purchase Group, it worked ..
Can some one help me what effect it had in generating message, before that message was green but i was not able to genertae JIT schedules

Creation profile based schedule lines

Dear all,
I release the Forcasting schedules based on the creation profile assign to the Scheduling agreement (Lpa)
In the creation profiel i have maintained the Aggegation horizon as 0-60 (days), 60-90(weeks) and 60-999 (months).
after release when i checked the schedules the aggegation is not properly.
how system caculated the the aggegation whether it consider the working day only or calender days
2. what is mean by creation indicator -R ( real time) B - mrp driven

Hi,
It depends upon the Planning Calendar specified in Creation profile customization.
R- Realtime means using ME38
MRP driven is self explanatory and are created by MRP when the source is fixed in sourcelist and MRP indicator maintained.
Hope this helps.

BAPI_SAG_CREATE error part profile ME366 in Scheduling Agreement

Hi All,
We are using BAPI_SAG_CREATE to create Scheduling agreement. In which we are getting an error ' #Following mandatory roles missing in partner maintenance: PI" i.e. error # ME 366.
Details are as below -
1) This error is related to Partner function and determination.
2) We can have more than one Invoice presented Vendor i.e. PI attached to Vendor VN.
3) If ONLY one Invoice presented Vendor i.e. PI attached to Vendor VN , then BAPI is working fine and new SA is getting created. We did not find any issue with it.
4) If more than Invoice presented Vendor i.e. PI attached to Vendor VN, then BAPI is giving the said error.
5) Seems there is an issue and BAPI is not able to get / pass correct Invoice presented Vendor i.e. PI.
We have checked, config is OK and everything works fine when only one Invoice presented Vendor i.e. PI attached to Vendor VN. So do not see any issue with config or any other setting.
Request you to please let us know, if you had similar issue in past. Please let us know, if you know any OSS notes or any kind of solutions.
Thanks and regards,
Rajesh Raj

Hi,
I think this is related to master data and the configuration. Check for Shipping data for the material
Also check with your functional team.
Please check the below links:
Not possible to determine shipping data for material
STO - Not possible to Determine Shipping Data for Material.
Shiva

Scheduling Agreements and Purchase Contracts in SAP APO

Hi
We are currently working on a SCM 5.0 trialbox and we don't have access to any R/3 environment.
Is it possible to create Scheduling Agreements/Purchase Contracts in APO ? If not then is there any way to upload the data using a flat file ?
Best Regards
Mitesh

Hi Mitesh,
You cannot create Contracts, Purchasing Inforecords and Scheduling Agreements in APO since these are all R/3 Master Data objects. These when CIFed to APO will create External Procurement Relationships of different types 1, 2 and 3.
Moreover automatically Transportation Lanes will get created corresponding to these Procurement Relationships. In APO the relevant master data is Transportation Lanes and not the Scheduling Agreements/ Purchase Inforecords / Contracts.
Hope this clarifies.
Thanks,
somnath

Schedule agreement-JIT and creation profile (are necessary to maintain)

Similar Messages

Maybe you are looking for