Schedule Background job using transaction CATM

Hi all,
Since we cannot schedule a background job using transaction CATM, I have created a program calling the CATM transaction through batch-input.
I have done a recording and entered the coding in a Z-program. For a vendor, I have recorded time in CAT2 for multiple purchase orders.
After entering the vendor number in CATM, all the purchase orders showed up. I have clicked 'select all' and posted.
When I run the program in the background, it posts only for one purchase order.
When I  run the program in the foreground, using the Select All-button it only proceeds with the first line in my list of PO's.
How to read the whole stack and post the whole stack of purchase orders? 
Please help me out with this.
Thanks
Regards
Srinivasan Desingh
408 368 3837

Hi,
When I run the program in the background, it posts only for one purchase order.
When I  run the program in the foreground, using the Select All-button it only proceeds with the first line in my list of PO's.
See..it's a Z-program so Its difficult to answer without checking the program. But I think, you should check your BDC again from Debugging, with the help of your abaper. You will find, why its is processing only one entry.
Regards
Shishir

Similar Messages

  • Schedule background job using system variant

    Dear gurus,
    We're planning to schedule background job using system variant, for example, current fiscal year and current posting period (transaction AFAB). Is it possible? So for example, for this month, "Posting Period" value will be 6, and then next month will be 7.
    Can you tell me how to do this, if I want to set up the schedule only once?
    Thanks for your help.
    Best Regards,

    done using abap

  • How to schedule a background job using the Event concept..?

    Hi Folks,
    I have a requirement that, I need a schedule a background job.
    Once after the previous job successful only, new job should get triggered. How to go ahead with this..?
    For Eg, I am scheduling a job called ZTEST periodically for 1 minute. If the job is not get completing with in 1 minute, I dont want to start my new job. Only after the success of my old job, I want my new job to run.
    Waiting for ur replies.
    Regards,
    Savi.

    Hi,
    You can use events that have already been defined, or you can create new events for scheduling background jobs.
    If you wish to use new events, do the following to implement the event scheduling:
    Define and transport the event as a user event with transaction SM62.
    You must define only event IDs; event arguments are not defined in the R/3 System. Instead, you specify event arguments when you schedule a job to wait for an event and when you trigger the event.
    If you define a new event, you must also transport it to your production systems. The event transaction does not have a connection to the transport system. Instead, you must create a transport request for the event yourself.
    Do this to transport an event:
    Create a transport request.
    Start the editor in the transport request and enter the following:
    R3TR TABU <table name> where table name is BTCSEV for a system event ID, BTCUEV for a user event ID.
    Press F2 with the cursor on the table name to call up the screen for specifying the table entries to transport. In this screen, enter the event ID’s that you have created.
    Save and release the transport request. Ensure that it is imported into your production system(s).
    To trigger an event, add:
    – the function module BP_EVENT_RAISE to your ABAP program, or
    – the program SAPEVT to your external script, batch file, or program.
    When your programs execute these keywords, an event will be triggered in the R/3 background processing system. The event-based scheduler is started immediately. It in turn starts all jobs that were waiting upon the event, subject to normal background processing restrictions, such as the requirement that the job has been released to start.
    Schedule the jobs that are to run when your events are triggered.
    You can schedule jobs for one-time start or to be started whenever an event is triggered.
    Regards,
    Raj.

  • How to schedule the background job using current selection screen field val

    Hello Friends,
    How to schedule the background job using current selection screen field values.
    after completion of the job the spool should be sent as a mail to SAP Inbox.
    Is there any way to create the variant dynamically by reading the current selection screen values.
    Thanks,
    Ravi

    Hi,
    To get the variant details you can use teh following FM.
    'RS_VARIANT_CONTENTS'.
    Regards,
    Ankur Parab

  • Schedule Background Jobs

    Hi
    Gurus
    What is Schedule Background Jobs and whatu2019s the use of Schedule Background Jobs
    How it will worku2019s
    Please give me detail Information about Schedule Background Jobs
    Many Thanks
    Mahi

    Hello Mahi,
    The BackGround job - "Program" thats runs in SAP Server and not depend any user interface.
    like Antivirus program on your local station that runs (scaning your computer all the time)  without any user interface (becide tray Icon) and unless you going to Running Proccess on your computer you don't know that it working.
    Schedule BackGround Job its any backGround Job that you schedule to run any time you want and you can make it run recursivly.
    you can go to Transaction SM36 to schedule your Programs.
    Good Luck
    Eli Steklov
    Please Reward Points if it Helped

  • API for scheduling background jobs

    Hello friends,
    What is the API provided by R/3 to schedule background jobs, apart from the internal transactions,  sm36 ?
    regards,
    Tanmay.

    Hi,
    There are FMs to create and schedule jobs instead of manually going to transaction SM36.
    JOB_OPEN (create a job)
    JOB_SUBMIT (attach program to be scheduled and set other scheduling parameters)
    JOB_CLOSE (finally release it for use)
    Hope your question is answered...
    Regards, Tapas
    <Pls reward if useful or answered>

  • Schedule Background Job :  Remove delivery Block in Sales order

    Hi Gurus,
    I have a requirement to select all sales orders as per a condition and remove delivery block at
    VA02-> Go to -> Header -> Status
    For that I have to write a program which will be run only in background and i have to schedule background job for the same.
    I have a parameter at selection - No of records
    If no of records = 500 , I have to submit 500 jobs ie one job each for each sales order for removing delivery block.
    I need to know
    1) Which function module/bapi I can use to remove delivery block at sales order header level.
        For blocked delivery the status is 'BSTK" . to remove block i need to change status to "RSTK".
    2) How to schedule a background job for my program and how to submit one job each for each sales   order.
    Regards
    Avi.

    Hi Avi,
    Would like to seek for your advice. I am facing the same scenario too which is to delete the delivery block but is deletion of the delivery block is done in the user exit MV45AFZZ. The subroutine which needs to have the extra logic of deleting the delivery block is USEREXIT_SAVE_DOCUMENT_PREPARE.
    Need your advice on how do you solve this scenario? Thanks in advance.

  • Schedule background jobs at OS level.....

    Hi All,
    Scheduling Background Jobs at SAP Level is a very simple task. Is there any way to schedule background jobs at OS level? Please lemme ASAP....
    Thanks
    Rhishabh

    Hi Rhishabh,
    Actually we can not completely schedule background at OSLevel but we can trigger a background job which has alreadyscheduled by using sapevt tool syntax as follows.
    sapevt <event name> nr=<instance name> name=<host name>
    or we have tool like
    In unix you use crontab.
    We can use different job scheduling softwares like IBM TIVOLI software MAESTRO JOB SCHEDULING CONSOLE, Control M
    Regards,
    Kiran M

  • Schedule Background Job whenever new message WVINVE

    Hi All,
    I have following requirment:-
    Schedule Background Job with a ABAP program,
    whenever new message type WVINVE posted in SAP inbound.
    I am confused in "Event" which i select in SM36.
    Or, is there any other method to trigger a background report, whenever WVINVE03 IDOC posted in SAP system & create physical Inventory document.
    regards
    Umesh

    For triggereing a background job, when ever a message type WVINVE is posted. You need to create a
    Background Job with the the program and mark the Job Event periodic. Secondly you need to trigger that event from the Inbound processing program or Function module which processes the message type using the Function module <b>BP_EVENT_RAISE</b>. so when ever a message type is processed it will trigger the event which inturns trigger the Job.
    Hope this will Help.

  • How to schedule a job for transaction CG36, incl. variant?

    Hi all,
    When you enter transaction CG36, you need to select a User Exist (EHS_DXSDB). After that you need to define a file path.
    I would like to schedule a job for transaction: CG36 > Define User Exit: EHS_DXSDB (Import Dok-X material Safety Data Sheets) > and define a path. With transaction SE93, I found program name: RC1RIMPS (program is allowed to be job scheduled), only I can't create a Variant (to define the user exit and file path, no selectionscreen), how to create a variant?
    The following programs can't be scheduled either (as they are not of type 1 or J):
    SAPLC131
    SAPLC1EO
    SAPLC3G
    Thank you in advance!
    Kind regards,
    Roy Derks

    Hello Roy
    I am sorry. To my knowledge up to ECC 6.0 Enhancement Pack 4 there is no SAP EH&S process available there you can do what you are requesting. The "problem" is that you need to "answer" the user dialog. Therefore you can not generate/prepare a variant which could be processed as a job according to my knowledge.
    Therefore in my opinion you have this option only: prepare a copy of the transaction (or only the report) using either "Z" or "Y (customer reports). Then you need to exclude some line in the code (which gives rise to the user dialog) and prepare some customer specific coding so that the resulting report can be used in such a way that a variant is possible, but you must make sure that the process later (the real upload process) is processed too in this "job" queue. IN any case: you need to check the log of the report and this must be done by an user. Therefore an automatic process does have some "risks"
    The topic of import of reports is used in most cases during a set up of EH&S, because of mergers/acustions but not in the daily work with EH&S and there I believe that SAP does not support this demand.
    With best regards
    C.B.

  • How to cancel scheduled background job?

    Hi,
    I have used FM 'HR_START_BATCHJOB_IN_OTHER_SYS' to schedule background job.
    Some mistake has happend and this FM calling has gone to infinite loop. So, now the system is keep on generating background job. I tried looking into SM36 to stop this background job but i failed.
    Can anybody help me how to stop scheduled background job please.
    Regards,
    Mukund.

    Hi,
    Check which background process your job is  running from the Job details and inform your Basis consultant to Kill the process. If you have sm50 acess or sm66 access you can do the same.
    Regards,
    Vijay v

  • Reg Super user for schedule background Jobs

    Hi Experts,
    I have created new user copied from DDIC with the same authorization. This is for scheduling Background Jobs. Now all the standard background Jobs are running fine. After scheduling the Jobs I have changed to system user. Now for audit purpose I need SAP note to do same. Please help me to get the sap note for the same. Please respond ASAP. treat this is as high priority.
    Thanks & Regards,
    Haseem.

    HI,
    It is not necessary for user having SAP_ALL authorization under which background job is running.
    Define specific users to use for background processing. Define them as system users (non-dialog) and give them only the necessary authorizations that are needed for the executed programs
    check  http://help.sap.com/saphelp_nw04/helpdata/en/db/f6f3393bef4604e10000000a11402f/frameset.htm
    also check Note 101146 - Batch: authorization object S_BTCH_JOB, S_BTCH_NAM
    regards,
    kaushal

  • BackGround Job for Transaction VF06

    Hi Experts,
    We are having problems with the background Job for transaction VF06. We run this job every day except weekends but this job runs and takes only 0 sec without creating Invoices.
    Allthough running this transaction Manually creates Invoice with same variant.
    Kindly help me on this.
    Thanks and Regards,
    Neha Kapoor

    Hi,
    I have the seen the Log it tells:
    Date       Time     Message text                                                                 Message class Message no. Message type
    29.06.2008 22:00:48 Job started                                                                       00           516          S
    29.06.2008 22:00:48 Step 001 started (program RV60SBAT, variant SOIE AUTO BILL, user ID GGBATCH)      00           550          S
    29.06.2008 22:00:48 Job finished                                                                      00           517          S
    But Invoices are not getting created.
    Thanks and Regards,
    Neha Kapoor

  • Error in Schedule Background Job for Deadline Monitoring of swu3

    While Auto Customization swu3 i am getting error message 'Output device "" not known' in 'Schedule Background Job for Deadline Monitoring'
    Please advice what could be cause of it

    the earlier problem of background job was solved by changing the  output device assigned to user wf-batch .
    regarding the transport request :
    when i was trying to execute the step : "Schedule bakgrd for missed deadlines " MANUEL it was giving me an option of SAVE AND SCHEDULE . which was creating the transport request . but when i executed it automatically it worked fine without asking a request to me ... i don't know why )-: ... probablly we can specify a different interval then the standard of three minutes and which will be transported (it's just a guess) . i have  executed it  automatically ...
    well thanks all for u r help

  • Schedule background job programatically

    Hi,
    I want to schedule background job programatically  .
    Also, I want to specify the scheduled start time & start date .
    Please suggest .
    Moderator message - This question has been asked and answered many times before. Please search before posting.
    Edited by: Rob Burbank on Apr 16, 2009 12:27 PM

    Hi
    Please check this link
    [http://help.sap.com/saphelp_46c/helpdata/en/fa/096ee5543b11d1898e0000e8322d00/frameset.htm]
    Thanks,
    Hari

Maybe you are looking for