Schedule Destination to File System

I am creating my first scheduled report in Central Management Console and have a question about the security credentials:
I have copied an existing reoccurring job from the History section
I am on the DESTINATION tab and choose FILE SYSTEM
Set to save to C:\temp folder
When I test-run the job I get the following error:
Destination disabled. [CrystalEnterprise.DiskUnmanaged]: []. Please note the
name of the job server used for your request and contact your system
administrator to make sure the specified destination is enabled. (FWB 00031)
What am I doing wrong?
Thanks for any help.
-Allen

Thanks for the follow up.
I found the setting, deep in the bowels of CAC.
This thread gave me the path for the setting:
http://scn.sap.com/thread/1660678
Thanks,
-Allen

Similar Messages

Setting Date value in File Name while scheduling report to File System

I am trying to set the file name as %SI_Name% Current Date.extension in Destination section while scheduling a crystal report to File system.
So in Use Specific Name section i have added %SI_NAME% %SI_STARTTIME%.%EXT%.
Schedule works fine for me and I get the document in the file location with name 'Title 2009-06-26-12-53-17.pdf".
But I dont want time to be printed in the title, so the title should be "Title 2009-06-26.pdf". How i can achieve this.
-Raghu

Is there any way to achieve this?
-Raghu
Edited by: Raghavendra Barekere on Jul 5, 2009 3:09 PM

Crystal Report failed scheduling onto the File System

Hi,
We have set up a Crystal report file for scheduling via file system. This report has been running fine with regards to generation all through last few months, but has started failing to generate the report at the scheduled time onto the file system from the last few days. When I checked the logs of the Instance Manager, it shows an error like this 'Unable to connect: incorrect log on parameters. Details: [Database Vendor Code: 1017 ]'.
Please note, I was able to run the report from InfoView without any issue, so I don't believe there is any issue with stored procedure/report/database connection but something else.
Can someone please provide some insights on this.
Thanks.

Hello Satish,
Is this issue specific to FileSystem location? What about default enterprise location?
When you view the reprt in InfoView, click on Refresh button to get current data. If the repot was published with Saved Data option, then you would see data in the report but it would be old one.
Above step would confirm that there is no issues with database user credentials specified with the report.
Also, open the report in Crystal Reports 2011, refresh it and publish without saved data in BI 4 repository and schedule it.
Regards,
Mahesh

Error with "File System" destination only in a Publication

Hello,
I am able to have individual reports run & refresh to a File System destination, but when I attempt to have the same reports, as part of a Publication, save to a File System destination, I receive this error in the log:
ERROR PublishingService:HandlerPool-32 BusinessObjects_PublicationAdminLog_Instance_15516 - Publication ID # 15516 - Distribution to destination CrystalEnterprise.DiskUnmanaged ... destination DLL disabled. [http://CrystalEnterprise.DiskUnmanaged ([1]/1])]: [ (FBE60013)
If I use Email instead of File System in this Publication, the Publication runs fine, no issues.
Thanks for any help.

Let's start with proper terminology
You're not sending report to unmanaged disk, you're scheduling it there.
When you use publication - you're publising it there.
2 different worflows, that use 2 different servers. Each server has to be configured for this functionality.
It is done in CMC in servers properties.
Admin guide will give you information on what each server in BO architecture is responcible for and what are the parameters that needs to be set for various workflows.

Local file system for archive destination in RAC with ASM

hi Gurus .
I need an info.
I have ASM file system in 2 node RAC.
The client does not want to use flash recovery area.
Can we use the archive destination as local file system rather than ASM.
like /xyzlog1 for archvies coming from node 1 and /xyzlog2 for archive logs coming from node 2.
Imortant thing is these two destinations are anot shared with each nodes.
OS is solaris sparc 10.
version is 10.2.0.2

There is huge space in the storage.
Pls tell me in general ho wdo you do this.
Do we take and one disk from the storage and format it with local file system and share it among the 2 nodes?
If so then that mount point will have same mount point name if we see it from other node... ..ryt
In this scenario if one instance is down then from the same shared mount point which is on the same node(down) can apply archves?Here, Earlier you are using any ASM shared location for ARCHIVES ?
if so you can add a CANDIDATE disk to your existing ARHCIVE disk group(shared).
if not from LUN's after format, I.e. candidates based on that you can create a new DISK group(shared) according to your space requirements. THen you can assign to log_archive_dest_1 for both the nodes to single shared location(disk group)

SSIS File System Task does not allow entering the destination variable

In SSIS for SQL Server 2012 (2014) I am not able to change the destination to a variable in the File System Task.
I have 2 variables for the source and destination path. I pull in a File System Task, change the source to a variable, but when I select the destination I cannot enter the destination variable. When I change destination to a variable
the dialog disappears when I try to select the variable.
http://www.screenr.com/fQKN

Hi Steve,
I have tried myself, it is working fine. Its look like something wrong with your visual studio. try to reinstall it or reset the visual studio.(http://msdn.microsoft.com/en-us/library/ms247075(v=vs.100).aspx).
If you really want to set destination values, you can set them from properties window of the task.(Right click the task and select properties or select the task and press f4).
There are properties like:
IsDestinationPathVariable (True/False)
Destination (VariableName eg: user::target)
Regards Harsh

Scheduling to File System BO4.0 without user/pass

Hello all,
I have a great deal of reports that I need to schedule to a network drive, which is mapped on the server running BO. However, I don't want to enter in a user and password on each instance. Obviously if the password changed for the account I would be screwed. I was assuming that BO would attempt to use the local account, but I'm still being forced to enter in values. Is there a setting somewhere in the CMC that I need to change?, or is there a place for me to enter in a user/pass once that can be changed without having to change every instance? I am using Enterprise authentication for the CMC if that matters at all. I attempted to enter in the user/pass in the Job Server destination, but there are multiple directories I will be sending to.
Thanks!

Hi Mike,
I would advise that you simply configure the Job Server Disk destination plugin with the drive details.
This way when scheduling you can simply ensure that the:
"Use Job Server Defaults" option is checked.
This is done like this:
To set your destination to file location
1. In the "Folders" management area of the CMC, select an object.
2. Click Actions > Schedule and access the "Destination" page.
u2022 If you are scheduling a Crystal report or object package, click Destination.
u2022 If you are scheduling a Desktop Intelligence document, click Formats and destination.
u2022 If you are scheduling a Web Intelligence document, click Formats and Destinations.
3. Select File location as the destination.
u2022 If you are scheduling a Crystal report or object package, select File Location from the Destination list.
u2022 If you are scheduling a Desktop Intelligence or Web Intelligence document, select File Location under "Output Format Details" and then click Destination Options and Settings.
4. If you are scheduling a Desktop Intelligence or Web Intelligence document, select or deselect Use the Job Server's defaults.
Note:
You can change the default Job Server settings in the "Servers" management area of the CMC. For more information, see the
BusinessObjects Enterprise Deployment and Configuration Guide.
I hope this is a very helpful answer to you.
If you have any questions please let me know.
Kind regards,
John

Moving copy of project laptop to iMac. When I try to export my laptop project to either a thumbdrive or a SD card, the export fails and says 'file system of destination volume not supported'. How to fix?

When trying to move a project from Macbook Pro laptop to iMac, the program says, 'file system of the destination volume is not supported.'
This is true for both a thumb drive and a SD card. What is the fix? Thanks

Format them OS X Extended. Aperture libraries have to be on OS X Extended formatted volumes.
Use Disk Utility. Remember when you format a drive you erase all the data that is on it. So it there is anything you want on those copy it off first.

Distribute to Multiple Locations on File System

Hi,
Is there any way to schedule a publication to multiple file system directories at the same time? When I use the "File System" destination option, it only allows for one directory. I'd like to be able to publish to multiple directories without having to create multiple publications or editing one's destination over and over again.
Thanks,
Cameron

not inside BOE, you'll have to do this outside - maybe using a cron/batch job that will copy files from one location to others
p.s.
And Why? do you need to do this is also interesting

[Forum FAQ] Schedule multiple versions of System Image Backup in Windows 8.1

As we known that there is no UI for user to configure Image backup in Windows 8.1, this is a guide for your to schedule multiple versions of System Image Backup.
Step 1: Create a task to schedule an image backup with following command:
SCHTASKS /Create /SC WEEKLY /D MON /TN WeeklyFullBackup /RL HIGHEST /ST 13:00 /TR “wbAdmin Start Backup -backupTarget:F: -include:C: -allCritical -quiet”
Step 2: Schedule a robocopy to backup the saved image with BAT file:
Please create a new folder (in this example, the new folder is e:\test2) to save your multiple copies of image backup:
Write following batch file to copy backup and rename with backup date:
*****************BAT********************
@echo off
robocopy e:\test1\ e:\test2\ test.wim
ren e:\test2\test.wim test_%date:~10,4%%date:~7,2%%date:~4,2%_%time:~0,2%%time:~3,2%.wim
NOTE: e:\test2 is my location to save multiple copies of image backup; e:\test1 is the location I create the system image backup.
This BAT can also help to rename the copy of image backup with date and time like below:
3. Set up a basic task in Task schedule:
Note: please make sure the time you configured follows the time you set for image backup in Step 1.
Action -> Create basic task (Name you task) -> Trigger (Set how often this task should be run) -> Action (Start a program) -> Under Program/script, point to your bat file you create in Step 2.b -> Finish
At the end, you can know more about SCHTASKS and Robocopy via following links:
Robocopy
http://technet.microsoft.com/en-us/library/cc733145.aspx
Schtasks
http://technet.microsoft.com/en-us/library/cc725744.aspx
Welcome to your feedbacks.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hi,
Thanks for posting in Microsoft TechNet forums.
I will try to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Regards,
Kelvin Xu
TechNet Community Support

Crystal Report Scheduling Destination Options in Infoview

Hello,
I need some information on the CR scheduling Destination Options available:
The 9 options as per my understanding are:
1. Default Enterprise Location: If you select this option, the instance is saved to the default Business Objects Enterprise location, which is the Output File Repository Server (FRS).
2. Default Inbox: If you select this option, the instance is saved to the inboxes configured on the job server.
3. Default File Location: If you select this option, the instance is saved to the unmanaged disk location configured for the job server.
4. Default FTP Server: If you select this option, the instance is saved to the FTP server configured on the job server.
5. Default Email Recipients: If you select this option the instance is emailed to the email recipients configured on the job server.
6. Specific Inbox: If you select this option you can specify whose inboxes you want to save the instance to.
7. Specific File Location: If you select this option, the instance is saved to the saved to the file location you specify here.
8. Specific FTP Server: If you select this option, you can specify which FTP server you want to save the instance to.
9. Specific Email Recipients: If you select this option, you can specify who you want to email the instance to.
Among the above 9, I have problems with Specific File Location and Specific FTP Server. Can someone please let me know how I can configure my reports to use these two destination.

Hi
If the folder is on the local machine following setting should be configured in destination for Unmanaged Disk
Username:Localmachine hostname\username
password:password of the username.
Here the username would have "Full Control" or "Modify" rights over the drive where desired folder resides and that folder.
If the folder is on the remote machine following settings should be configured in the destination tab.
Username:DomainName\DomainUsername
Password:password of DomainUsername.
DomainUsername should also have "Modify" rights over the drive and the folder.
Is the desired folder present on the SAN drive?
Regards,
Hrishikesh P

File system task error ; Access to the path " " is denied

HI All,
I have created a simple package to copy xml files from multiple source folders to destination folder.
Folder names and paths are stored in a sql table. I use execute sql taks to get folder and path names. set the restult set to full result set in the execute sql task.
Then for each loop is used to loop through each file name. File system taks is inside the for each loop. Destination vairable and source varable were created and assigned them inthe file system task.
But I am getting an error message.
[File System Task] Error: An error occurred with the following error message: "Access to the path '\\cor\Groups\DN\Share2\Servicing \RESPONSE_FILES\Services' is denied.".
But I am able to do this if i design the package to move just one file. i.e without using variables. I get the error message only when I use variables.
Can anyone tell me how to fix this please?
Thanks
shamen

How to give the access please.
Ramu Gade
Login using a sysadmin account
Go to the folder right click security and you've the option to add new account. You should give account write access if you want to copy files to folder.
see
http://technet.microsoft.com/en-in/library/bb456988.aspx
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

SSIS File System Task Move File Could not find part of the path error

Hi All,
I am getting error in production when try to move files from one folder to another folder. But on Dev environment working fine.
An error occurred with the following error message: "Could not find a part of the path 'C:\Archive\ABC.txt'
My package configuration details.
1) For Each loop Container
Prop’s:
Enumerator: For Each File Enumerator
Folder: C:\
Files: *.txt
Retrieve File name --> Fully qualified
In Tab Variable mapping: User::name --0
2) File System task
Props:
Destination Connection: c:\archive\
Overwrite destination: True
Operation: Move file
Is Source Path Variable: True
Source Variable: User::name
Please share your suggestions on this.
Regards,
Vaishu

Hi Vaishu ,
Try below links :
http://www.allaboutmssql.com/2012/09/sql-server-integration-services-rename.html
http://social.technet.microsoft.com/wiki/contents/articles/18776.ssis-move-a-folder-from-one-drive-to-another-drive-using-the-file-system-task.aspx
sathya - www.allaboutmssql.com ** Mark as answered if my post solved your problem and Vote as helpful if my post was useful **.

Read only file system

One of my Parabola installations has started to always mount the / partition read-only. I've booted into a different install on the same machine, and can mount the affected partition without problems. I've done a fsck, and run the SMART disk checks. No problems. I've touched /forcefsck so a file system check is done every time I boot, but still the partition is read-only when it finishes booting.
This is the output of 'mount':
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
sys on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
dev on /dev type devtmpfs (rw,nosuid,relatime,size=1024388k,nr_inodes=256097,mode=755)
run on /run type tmpfs (rw,nosuid,nodev,relatime,mode=755)
/dev/sdb10 on / type ext4 (ro,relatime,data=ordered)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
/dev/sdb9 on /boot type ext4 (rw,relatime,data=ordered)
/dev/sdb1 on /media/Stuff type fuseblk (rw,nosuid,nodev,noexec,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096)
binfmt on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)
This is the output of 'dmesg':
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.3-1-LIBRE (nobody@root) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Tue Oct 23 00:29:01 UYST 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-libre root=UUID=f0206707-f1ca-4bea-9eb3-c5d3713e4a4e ro resume=UUID=5b4248ba-30c3-48e5-a090-3a9c9f49d9c4 quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff8ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ff90000-0x000000007ff9dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007ff9e000-0x000000007ffcffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007ffd0000-0x000000007ffddfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer System Product Name/P5KPL-CM, BIOS 0702 08/27/2010
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7ff90 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x7ff8ffff]
[ 0.000000] [mem 0x00000000-0x7fdfffff] page 2M
[ 0.000000] [mem 0x7fe00000-0x7ff8ffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x7ff8ffff @ [mem 0x1fbfd000-0x1fffffff]
[ 0.000000] RAMDISK: [mem 0x37a10000-0x37cfffff]
[ 0.000000] ACPI: RSDP 00000000000fb6a0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000007ff90000 0003C (v01 A_M_I_ OEMRSDT 08001027 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007ff90200 00084 (v02 A_M_I_ OEMFACP 08001027 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000007ff905c0 07BFA (v01 A0968 A0968000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 000000007ff9e000 00040
[ 0.000000] ACPI: APIC 000000007ff90390 0006C (v01 A_M_I_ OEMAPIC 08001027 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000007ff90400 0003C (v01 A_M_I_ OEMMCFG 08001027 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000007ff9e040 00080 (v01 A_M_I_ AMI_OEM 08001027 MSFT 00000097)
[ 0.000000] ACPI: HPET 000000007ff981c0 00038 (v01 A_M_I_ OEMHPET 08001027 MSFT 00000097)
[ 0.000000] ACPI: GSCI 000000007ff9e0c0 02024 (v01 A_M_I_ GMCHSCI 08001027 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ff8ffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7ff8ffff]
[ 0.000000] NODE_DATA [mem 0x7ff8c000-0x7ff8ffff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7ff8ffff]
[ 0.000000] On node 0 totalpages: 524063
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8127 pages used for memmap
[ 0.000000] DMA32 zone: 511953 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] e820: [mem 0x80000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s84608 r8192 d21888 u524288
[ 0.000000] pcpu-alloc: s84608 r8192 d21888 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515866
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-libre root=UUID=f0206707-f1ca-4bea-9eb3-c5d3713e4a4e ro resume=UUID=5b4248ba-30c3-48e5-a090-3a9c9f49d9c4 quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2048780k/2096704k available (4726k kernel code, 452k absent, 47472k reserved, 4144k data, 772k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1613.131 MHz processor
[ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3227.68 BogoMIPS (lpj=5377103)
[ 0.003342] pid_max: default: 32768 minimum: 301
[ 0.003391] Security Framework initialized
[ 0.003397] AppArmor: AppArmor disabled by boot time parameter
[ 0.003643] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004961] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.005580] Mount-cache hash table entries: 256
[ 0.005927] Initializing cgroup subsys cpuacct
[ 0.005933] Initializing cgroup subsys memory
[ 0.005946] Initializing cgroup subsys devices
[ 0.005949] Initializing cgroup subsys freezer
[ 0.005951] Initializing cgroup subsys net_cls
[ 0.005953] Initializing cgroup subsys blkio
[ 0.005995] CPU: Physical Processor ID: 0
[ 0.005998] CPU: Processor Core ID: 0
[ 0.006000] mce: CPU supports 6 MCE banks
[ 0.006010] CPU0: Thermal monitoring enabled (TM2)
[ 0.006015] process: using mwait in idle threads
[ 0.006021] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift is 0xffffffff
[ 0.008169] ACPI: Core revision 20120711
[ 0.013350] ftrace: allocating 18348 entries in 72 pages
[ 0.026962] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059974] smpboot: CPU0: Intel(R) Celeron(R) CPU E1200 @ 1.60GHz stepping 0d
[ 0.059996] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.059996] perf_event_intel: PEBS disabled due to CPU errata
[ 0.059996] ... version: 2
[ 0.059996] ... bit width: 40
[ 0.059996] ... generic registers: 2
[ 0.059996] ... value mask: 000000ffffffffff
[ 0.059996] ... max period: 000000007fffffff
[ 0.059996] ... fixed-purpose events: 3
[ 0.059996] ... event mask: 0000000700000003
[ 0.083501] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.096681] smpboot: Booting Node 0, Processors #1
[ 0.109825] Brought up 2 CPUs
[ 0.109825] smpboot: Total of 2 processors activated (6455.37 BogoMIPS)
[ 0.110104] devtmpfs: initialized
[ 0.112186] PM: Registering ACPI NVS region [mem 0x7ff9e000-0x7ffcffff] (204800 bytes)
[ 0.112186] NET: Registered protocol family 16
[ 0.112186] ACPI: bus type pci registered
[ 0.112186] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.112186] PCI: not using MMCONFIG
[ 0.112186] PCI: Using configuration type 1 for base access
[ 0.113367] bio: create slab <bio-0> at 0
[ 0.113401] ACPI: Added _OSI(Module Device)
[ 0.113401] ACPI: Added _OSI(Processor Device)
[ 0.113401] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.113401] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.114233] ACPI: EC: Look up EC in DSDT
[ 0.116040] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.122816] ACPI: SSDT 000000007ffa00f0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.122816] ACPI: Dynamic OEM Table Load:
[ 0.122816] ACPI: SSDT (null) 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.122816] ACPI: SSDT 000000007ffa02d0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.122816] ACPI: Dynamic OEM Table Load:
[ 0.122816] ACPI: SSDT (null) 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.122816] ACPI: Interpreter enabled
[ 0.122816] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.122816] ACPI: Using IOAPIC for interrupt routing
[ 0.122816] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.122816] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
[ 0.136077] ACPI: No dock devices found.
[ 0.136086] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.136182] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.136328] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.136382] PCI host bridge to bus 0000:00
[ 0.136387] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
[ 0.136390] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.136394] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.136397] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.136400] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.136403] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.136406] pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff]
[ 0.136420] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.136478] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[ 0.136533] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.136587] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.136606] pci 0000:00:1b.0: reg 10: [mem 0xfe9fc000-0xfe9fffff 64bit]
[ 0.136697] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.136723] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.136803] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.136831] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.136910] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.136941] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.136986] pci 0000:00:1d.0: reg 20: [io 0xc480-0xc49f]
[ 0.137022] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.137067] pci 0000:00:1d.1: reg 20: [io 0xc800-0xc81f]
[ 0.137108] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.137153] pci 0000:00:1d.2: reg 20: [io 0xc880-0xc89f]
[ 0.137190] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.137235] pci 0000:00:1d.3: reg 20: [io 0xcc00-0xcc1f]
[ 0.137282] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.137304] pci 0000:00:1d.7: reg 10: [mem 0xfe9fbc00-0xfe9fbfff]
[ 0.137395] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.137419] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.137491] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[ 0.137581] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.137630] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.137645] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.137656] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.137667] pci 0000:00:1f.1: reg 18: [io 0x08f0-0x08f7]
[ 0.137678] pci 0000:00:1f.1: reg 1c: [io 0x08f8-0x08fb]
[ 0.137689] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
[ 0.137730] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[ 0.137747] pci 0000:00:1f.2: reg 10: [io 0xc400-0xc407]
[ 0.137757] pci 0000:00:1f.2: reg 14: [io 0xc080-0xc083]
[ 0.137767] pci 0000:00:1f.2: reg 18: [io 0xc000-0xc007]
[ 0.137777] pci 0000:00:1f.2: reg 1c: [io 0xbc00-0xbc03]
[ 0.137786] pci 0000:00:1f.2: reg 20: [io 0xb880-0xb88f]
[ 0.137827] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.137845] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.137901] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.137974] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-ff]
[ 0.137991] pci 0000:01:00.0: [1002:68f9] type 00 class 0x030000
[ 0.138008] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.138021] pci 0000:01:00.0: reg 18: [mem 0xfeac0000-0xfeadffff 64bit]
[ 0.138031] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
[ 0.138047] pci 0000:01:00.0: reg 30: [mem 0xfeaa0000-0xfeabffff pref]
[ 0.138085] pci 0000:01:00.0: supports D1 D2
[ 0.138109] pci 0000:01:00.1: [1002:aa68] type 00 class 0x040300
[ 0.138125] pci 0000:01:00.1: reg 10: [mem 0xfeafc000-0xfeafffff 64bit]
[ 0.138195] pci 0000:01:00.1: supports D1 D2
[ 0.138231] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.138236] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.138240] pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.138246] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.138291] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-ff]
[ 0.138295] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.138347] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
[ 0.138372] pci 0000:02:00.0: [1969:1026] type 00 class 0x020000
[ 0.138398] pci 0000:02:00.0: reg 10: [mem 0xfebc0000-0xfebfffff 64bit]
[ 0.138412] pci 0000:02:00.0: reg 18: [io 0xec00-0xec7f]
[ 0.138519] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.138544] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.138555] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.138560] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.138565] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.138595] pci_bus 0000:04: busn_res: [bus 04] is inserted under [bus 00-ff]
[ 0.138642] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.138654] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.138657] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.138660] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.138663] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.138666] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
[ 0.138689] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.138794] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.138867] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.138903] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.138963] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.138967] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.145009] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.145073] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
[ 0.145128] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 11 12 14 15)
[ 0.145187] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.145246] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.145306] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.145365] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.145425] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 11 12 14 15)
[ 0.146698] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.146703] vgaarb: loaded
[ 0.146705] vgaarb: bridge control possible 0000:01:00.0
[ 0.146775] PCI: Using ACPI for IRQ routing
[ 0.147301] PCI: pci_cache_line_size set to 64 bytes
[ 0.147387] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.147389] e820: reserve RAM buffer [mem 0x7ff90000-0x7fffffff]
[ 0.147545] NetLabel: Initializing
[ 0.147548] NetLabel: domain hash size = 128
[ 0.147550] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.147571] NetLabel: unlabeled traffic allowed by default
[ 0.147588] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.147593] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.147599] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.166686] Switching to clocksource hpet
[ 0.177018] pnp: PnP ACPI init
[ 0.177044] ACPI: bus type pnp registered
[ 0.177174] pnp 00:00: [bus 00-ff]
[ 0.177179] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.177182] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.177186] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.177189] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.177192] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.177195] pnp 00:00: [mem 0x80000000-0xffffffff window]
[ 0.177279] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.177295] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.177363] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.177369] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.177419] pnp 00:02: [dma 4]
[ 0.177423] pnp 00:02: [io 0x0000-0x000f]
[ 0.177426] pnp 00:02: [io 0x0081-0x0083]
[ 0.177429] pnp 00:02: [io 0x0087]
[ 0.177431] pnp 00:02: [io 0x0089-0x008b]
[ 0.177434] pnp 00:02: [io 0x008f]
[ 0.177437] pnp 00:02: [io 0x00c0-0x00df]
[ 0.177478] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.177494] pnp 00:03: [io 0x0070-0x0071]
[ 0.177508] pnp 00:03: [irq 8]
[ 0.177544] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.177557] pnp 00:04: [io 0x0061]
[ 0.177595] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.177609] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.177617] pnp 00:05: [irq 13]
[ 0.177654] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.178000] pnp 00:06: [irq 6]
[ 0.178004] pnp 00:06: [dma 2]
[ 0.178007] pnp 00:06: [io 0x03f0-0x03f5]
[ 0.178010] pnp 00:06: [io 0x03f7]
[ 0.178096] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.178501] pnp 00:07: [irq 7]
[ 0.178504] pnp 00:07: [dma 3]
[ 0.178508] pnp 00:07: [io 0x0378-0x037f]
[ 0.178511] pnp 00:07: [io 0x0778-0x077f]
[ 0.178686] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.178731] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.178735] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.178738] pnp 00:08: [io 0x0290-0x0297]
[ 0.178815] system 00:08: [io 0x0290-0x0297] has been reserved
[ 0.178821] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.178918] pnp 00:09: [io 0x0010-0x001f]
[ 0.178922] pnp 00:09: [io 0x0022-0x003f]
[ 0.178925] pnp 00:09: [io 0x0044-0x005f]
[ 0.178928] pnp 00:09: [io 0x0062-0x0063]
[ 0.178934] pnp 00:09: [io 0x0065-0x006f]
[ 0.178937] pnp 00:09: [io 0x0072-0x007f]
[ 0.178939] pnp 00:09: [io 0x0080]
[ 0.178942] pnp 00:09: [io 0x0084-0x0086]
[ 0.178945] pnp 00:09: [io 0x0088]
[ 0.178948] pnp 00:09: [io 0x008c-0x008e]
[ 0.178951] pnp 00:09: [io 0x0090-0x009f]
[ 0.178953] pnp 00:09: [io 0x00a2-0x00bf]
[ 0.178956] pnp 00:09: [io 0x00e0-0x00ef]
[ 0.178959] pnp 00:09: [io 0x04d0-0x04d1]
[ 0.178962] pnp 00:09: [io 0x0800-0x087f]
[ 0.178965] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.178968] pnp 00:09: [io 0x0480-0x04bf]
[ 0.178971] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[ 0.178974] pnp 00:09: [mem 0xfed20000-0xfed8ffff]
[ 0.179068] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.179072] system 00:09: [io 0x0800-0x087f] has been reserved
[ 0.179076] system 00:09: [io 0x0480-0x04bf] has been reserved
[ 0.179080] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.179083] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.179089] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.179173] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
[ 0.179219] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.179280] pnp 00:0b: [mem 0xffb00000-0xffbfffff]
[ 0.179284] pnp 00:0b: [mem 0xfff00000-0xffffffff]
[ 0.179332] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.179387] pnp 00:0c: [mem 0xffc00000-0xffefffff]
[ 0.179460] system 00:0c: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.179466] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.179524] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[ 0.179528] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
[ 0.179608] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.179612] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.179617] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.179660] pnp 00:0e: [io 0x0060]
[ 0.179663] pnp 00:0e: [io 0x0064]
[ 0.179673] pnp 00:0e: [irq 1]
[ 0.179734] pnp 00:0e: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.179796] pnp 00:0f: [irq 12]
[ 0.179852] pnp 00:0f: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.180166] pnp 00:10: [irq 4]
[ 0.180170] pnp 00:10: [dma 0 disabled]
[ 0.180173] pnp 00:10: [io 0x03f8-0x03ff]
[ 0.180292] pnp 00:10: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.180342] pnp 00:11: [mem 0xf0000000-0xf3ffffff]
[ 0.180427] system 00:11: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.180433] system 00:11: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.180636] pnp 00:12: [mem 0x00000000-0x0009ffff]
[ 0.180640] pnp 00:12: [mem 0x000c0000-0x000cffff]
[ 0.180643] pnp 00:12: [mem 0x000e0000-0x000fffff]
[ 0.180646] pnp 00:12: [mem 0x00100000-0x7fffffff]
[ 0.180649] pnp 00:12: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.180743] system 00:12: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.180747] system 00:12: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.180751] system 00:12: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.180754] system 00:12: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.180760] system 00:12: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.180916] pnp: PnP ACPI: found 19 devices
[ 0.180919] ACPI: ACPI bus type pnp unregistered
[ 0.188605] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.188613] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.188617] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[ 0.188628] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.188646] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.188650] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.188653] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.188657] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.188664] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
[ 0.188668] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[ 0.188673] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[ 0.188678] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.188683] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.188687] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.188693] pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.188697] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.188703] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.188707] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.188713] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
[ 0.188718] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
[ 0.188725] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.188729] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.188735] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.188740] pci 0000:00:1c.1: bridge window [mem 0x80400000-0x805fffff 64bit pref]
[ 0.188747] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 0.188784] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.188805] pci 0000:00:1e.0: setting latency timer to 64
[ 0.188810] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.188814] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.188817] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.188820] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.188824] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
[ 0.188827] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.188830] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.188833] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.188836] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.188840] pci_bus 0000:03: resource 1 [mem 0x80000000-0x801fffff]
[ 0.188843] pci_bus 0000:03: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[ 0.188846] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.188849] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.188852] pci_bus 0000:02: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[ 0.188856] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.188859] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.188862] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.188865] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.188868] pci_bus 0000:04: resource 8 [mem 0x80000000-0xffffffff]
[ 0.188916] NET: Registered protocol family 2
[ 0.189551] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.192082] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.192686] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.192758] TCP: reno registered
[ 0.192773] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.192798] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.192949] NET: Registered protocol family 1
[ 0.193147] pci 0000:01:00.0: Boot video device
[ 0.193158] PCI: CLS 32 bytes, default 64
[ 0.193230] Unpacking initramfs...
[ 0.285578] Freeing initrd memory: 3008k freed
[ 0.287514] audit: initializing netlink socket (disabled)
[ 0.287533] type=2000 audit(1351450895.286:1): initialized
[ 0.303689] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.306261] VFS: Disk quotas dquot_6.5.2
[ 0.306342] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.306570] msgmni has been set to 4007
[ 0.306904] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.306951] io scheduler noop registered
[ 0.306955] io scheduler deadline registered
[ 0.307043] io scheduler cfq registered (default)
[ 0.307215] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.307324] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.307443] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.307659] intel_idle: does not run on family 6 model 15
[ 0.307698] GHES: HEST is not enabled!
[ 0.307788] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.328340] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.349279] 00:10: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.349579] Linux agpgart interface v0.103
[ 0.349708] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.352389] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.352444] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.352607] mousedev: PS/2 mouse device common for all mice
[ 0.352700] rtc_cmos 00:03: RTC can wake from S4
[ 0.352865] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.352896] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.352913] cpuidle: using governor ladder
[ 0.352915] cpuidle: using governor menu
[ 0.353088] drop_monitor: Initializing network drop monitor service
[ 0.353195] TCP: cubic registered
[ 0.353379] NET: Registered protocol family 10
[ 0.353609] NET: Registered protocol family 17
[ 0.353626] Key type dns_resolver registered
[ 0.353965] PM: Checking hibernation image partition UUID=5b4248ba-30c3-48e5-a090-3a9c9f49d9c4
[ 0.377050] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.398600] PM: Hibernation image not present or could not be loaded.
[ 0.398629] registered taskstats version 1
[ 0.399166] rtc_cmos 00:03: setting system clock to 2012-10-28 19:01:35 UTC (1351450895)
[ 0.400807] Freeing unused kernel memory: 772k freed
[ 0.401093] Write protecting the kernel read-only data: 8192k
[ 0.407007] Freeing unused kernel memory: 1408k freed
[ 0.410355] Freeing unused kernel memory: 652k freed
[ 0.424642] systemd-udevd[42]: starting version 194
[ 0.484567] ACPI: bus type usb registered
[ 0.484613] usbcore: registered new interface driver usbfs
[ 0.484629] usbcore: registered new interface driver hub
[ 0.484994] usbcore: registered new device driver usb
[ 0.485924] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.485981] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.485987] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.485997] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.489913] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.489922] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.489951] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe9fbc00
[ 0.493550] SCSI subsystem initialized
[ 0.496118] ACPI: bus type scsi registered
[ 0.496720] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.497003] hub 1-0:1.0: USB hub found
[ 0.497013] hub 1-0:1.0: 8 ports detected
[ 0.497923] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.497967] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.497972] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.497982] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.498020] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480
[ 0.498143] libata version 3.00 loaded.
[ 0.499305] hub 2-0:1.0: USB hub found
[ 0.499317] hub 2-0:1.0: 2 ports detected
[ 0.499540] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.499547] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.499557] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.499610] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
[ 0.500253] hub 3-0:1.0: USB hub found
[ 0.500264] hub 3-0:1.0: 2 ports detected
[ 0.500442] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.500448] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.500463] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.500512] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
[ 0.500811] hub 4-0:1.0: USB hub found
[ 0.500822] hub 4-0:1.0: 2 ports detected
[ 0.501016] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.501022] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.501039] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.501090] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00
[ 0.502169] hub 5-0:1.0: USB hub found
[ 0.502179] hub 5-0:1.0: 2 ports detected
[ 0.502422] ata_piix 0000:00:1f.1: version 2.13
[ 0.502499] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.503963] scsi0 : ata_piix
[ 0.504744] scsi1 : ata_piix
[ 0.505372] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.505378] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.505429] ata_piix 0000:00:1f.2: MAP [
[ 0.505431] P0 P2 P1 P3 ]
[ 0.505484] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.507566] scsi2 : ata_piix
[ 0.508975] scsi3 : ata_piix
[ 0.509624] ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 19
[ 0.509630] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 19
[ 0.684177] ata3.00: ATA-8: WDC WD6400AAKS-00A7B2, 01.03B01, max UDMA/133
[ 0.684184] ata3.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.691230] ata3.00: configured for UDMA/133
[ 0.691417] scsi 2:0:0:0: Direct-Access ATA WDC WD6400AAKS-0 01.0 PQ: 0 ANSI: 5
[ 0.699349] sd 2:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 0.699463] sd 2:0:0:0: [sda] Write Protect is off
[ 0.699468] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.699516] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.774080] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 0.775132] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.096765] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[ 1.275214] usbcore: registered new interface driver usbhid
[ 1.275219] usbhid: USB HID core driver
[ 1.276959] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input1
[ 1.277358] hid-generic 0003:04B3:310C.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2/input0
[ 1.290145] tsc: Refined TSC clocksource calibration: 1613.217 MHz
[ 1.290153] Switching to clocksource tsc
[ 1.426263] PM: Starting manual resume from disk
[ 1.426269] PM: Hibernation image partition 8:8 present
[ 1.426271] PM: Looking for hibernation image.
[ 1.426530] PM: Image not found (code -22)
[ 1.426535] PM: Hibernation image not present or could not be loaded.
[ 1.648559] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 12.388263] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 12.459036] fuse init (API version 7.20)
[ 13.150864] Adding 1951860k swap on /dev/sda8. Priority:-1 extents:1 across:1951860k
[ 0.691798] ACPI: Invalid Power Resource to register!
[ 14.060519] synergys[417]: segfault at 0 ip 0000000000449fa9 sp 00007fff68a19a90 error 4
[ 14.060531] in synergys[400000+cb000]
(I disconnected the second hard drive in the machine to verify that it wasn't causing problems. Hence the sda / sdb discrepancy)
I've been able to mount the partitions and chroot into them, but I don't know what to do from here. Oddly, I've discovered that 'ls' doesn't output anything, although bash completion seems to work ok.
Any ideas on what I should do to get my system running again?
Thanks in advance,
Bernie

Have you read the forum rules? Asking for support for Parabola isn't going to get you very far.
https://wiki.archlinux.org/index.php/Fo … pport_ONLY

Getting XML data of SSIS Package (which is located in File System) from a query

Hi,
We have around 200 SSIS packages deployed to File System. These pacakges are being scheduled using SQL Agent job.
So, currently I have a list of all the packages and their respective File Path.
Note : **They are NOT deployed to Server**.
Now, my task is to search all the packages which has a specific connection in it.
From the below blog, I got to know we can achieve this by querying the XML data of the SSIS Package.
https://www.simple-talk.com/sql/ssis/-exploring-ssis-architecture-and-execution-history-through-scripting/.
But in the above article they are getting the XML definition of the Package from msdb(as it was deployed to server).
In my requirement, SSIS Packages are in File System. Is there any way to to get the XML definition of these packages using a query.
Please let me know if the above requirement is not clear or if any further information is required.
Thanks
Raksha

Hi Visakh & Praveen,
Thanks for the response.
@Visakh: The query provided by you gives the information about all the connection strings in the package.
@Praveen: The query in the link provided by you lists the values of all the properties of the package like MaxerrorCount, CreatorName, CreatorDate and other properties.
I think, we may have to slightly modify this query to get the connection string values
Praveen, nice to hear from you after a long time and that too in this forum !! :) Hope you are doing good.
Thanks
Raksha

Schedule Destination to File System

Similar Messages

Maybe you are looking for