Schedule Info package in background

Hi,
When I schedule my info package in background mode, it should schedule the job with my BW back ground user .
BW user is the back ground user in mysystem. But my Process Overview shows that it is scheduled as Dialogue there by utiling my dialogue processers.
Kindly let me know the reason behind it.
Regards,
Ahmed

Ok, for bi7, this is the way it works...
when you run an IP in background it will execute a dialog process on the BW side. this process is needed to execute (send the outbound messages) the background job on the R/3 part (with the BW remote user)... in prior releases a background job was also running on the BW side as long as the R/3 load was running, but with the bi7 adaptations it takes less place on bw side, hence performance has improved...
M.

Similar Messages

Problem while scheduling info package using HR datasource.

hi experts,
while scheduling the info package i am getting the following error.
Delete init. request
REQU_D340A67OSEQ9A6Q2B20X9SIOM before running
init. again with same selection
I think by deleting the setup it will work...
am i right or is there any other solution for this problem..
please reply soon.
its too urgent.
thanks n regards.
uday shankar.

Hi,
You are correct there is no setup table concept in HR extractors.
But there is a cache. Usually HR extractions will be full load. But it also supports delta. There is no setup table concept in HR.Once you perform your init (with or without Data transfer your delta path is set and delta will follow else can go for Full loads alone. It will extract data from the relevant tables like generic extractors. The data will be filtered based on the selection parameters.
Except for payroll and time management rest all sub-functional areas supports only full load.
In case of full loads, old data needs to be deleted to avoid duplicated records in the target.
Auditing Information Technical name: 0HR_PY_PP_1
http://help.sap.com/saphelp_nw70/helpdata/EN/c7/532d7835db9a41b744aea58ed699ed/frameset.htm
Delta Update
This DataSource supports delta updates. The source system fills table HRMS_BIW_PPDELTA with the date and time of the first data transfer (initialization) and the date and time of all subsequent data transfers. This information enables the system to perform a delta transfer. It only selects posting runs with the above statuses whose last changed on date is after the date in table HRMS_BIW_PPDELTA.
If you use DataSources 0HR_PY_PP_2 (Posting Documents) and 0HR_PY_PP_1 (Auditing Information), you must transfer data to BW from both DataSources using the same selection criteria.
Also
http://help.sap.com/saphelp_nw04/helpdata/en/2a/77eb3cad744026e10000000a11405a/frameset.htm
https://websmp201.sap-ag.de/~sapdownload/011000358700004478862001E
/people/swapna.gollakota/blog/2008/01/14/one-stage-stop-to-know-all-about-bw-extractors-part1
step by step
https://websmp201.sap-ag.de/~sapdownload/011000358700004478862001E
HR extraction:
The HR module enables customers to effectively manage information about the people in their organization, and to integrate that information with other SAP modules and external systems
HR broadly has the following modules:
PA (Personnel Administration) and Organization Management
Personnel Development
Payroll Accounting
Time Management
Compensation
Benefits
Training and Events
The Personnel Administration (PA) sub module helps employers to track employee master data, work schedules, salary and benefits information. Personnel Development (PD) functionality focuses on employees' skills, qualifications and career plans. Finally, the Time Evaluation and Payroll sub modules process attendance and absences, gross salary and tax calculations, and payments to employees and third-party vendors
HR delivers a rich set of business content objects that covers all HR sub-functional areas.
How the data extraction happens:
Before getting into how the data gets populated into HR info cube
Let's understand the term info type
"An info type is a collection of logical and/or business-related characteristics of an object or person"
Here the data will be extracted from an info type (PA, PD, time management etc) and for few other applications it is from the cluster tables (Payroll, compensation etc.)
HR is basically master data centric because it is always related to people related Info Objects, such as Employee, Person. In most of the cases HR master data is defined as Time Dependent to enable historical evaluation. HR R/3 system records a specific period of validity for each Info type.
Procedure to extract the HR data:
Activate Data Sources in the Source system (R/3)
Replicate Data Sources in BW system:
Activate business contents in BW.
Populate HR cubes with data by scheduling info packages.
Note: Master Data should be loaded first
Except for payroll and time management rest all sub-functional areas supports only full load.
In case of full loads, old data needs to be deleted to avoid duplicated records in the target.
Check the below links for more information
Technical Considerations in Global SAP BW/HR Implementations
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/505351fe-ec8c-2910-c5b5-a43bbf53f6fc
BW/HR Implementation
https://websmp201.sap-ag.de/~sapdownload/011000358700004478862001E
Hope this helps.
Thanks,
JituK

Scheduling Info packages

Hello Guru's,
Please help me in one issue in the scheduling the infopackages with variables,
My requirement is actually there are actual 17 companies, so the while scheduing the infopackage they want a selection screen for entering the values for data selection.
Thanks in Advance
Kumar

Hello Vallese,
Thanks for the prompt reply, actually we were having in the same way as u said, 17 diffrent info packages for 17 diffrent companies, but the user insisting that he wants a single infopackage, and while scheduling that, he wants a Pop-up-screen so that he can select the company fisical year..etc, so he is asking for variables, please let me know how to handle it,
Thanks Once again,
Kumar

Scheduling from info package

Hi,
I want to scheule a load at later time today from the infopackage.I created one info package with background job,in the scheduling options I have given date and time.I would like to confirm whether it works?
Could some one clarify this?
Thanks
Manish

After specifying the scheduling option, did you execute(pressed 'start') it, or just saved it?
If you pressed 'start', it will run it at the specified time. To check this, you can see a job in 'released' status with that start time, you can see that in SM37.

)How can we schedule the info package daily run at 6 AM, with out useing in

Hi
   Can any one explain 1) what is information broadcasting &how can we use this.
2)What are the settings we have to do when we use the charts in WAD's
3)How can we schedule the info package daily run at 6 AM, with out useing in process chains
Thanks
Bharath

Hi,
Information broadcaster :
      you can precalculate and distribute(thru mail) the query, workbook and webtemplate through online link or html file to the receipents (users).
have a look at the below link.
     http://help.sap.com/saphelp_nw04/helpdata/en/3a/0e044017355c0ce10000000a1550b0/frameset.htm
Infopackage scheduling:
     you can schedule the infopackage daily at your desired time .In the schedule tab ,select the start later in background and in the scheduling option give the date and time and give the period values as daily.
Regards,
Siva.

Error in Scheduling INIT Info package

Hi All,
We have a standard extractor in CRM which we have replicated to our BW system. We also had transfer rules ready as a part of the BI content, but were present as 3.x data flows. So, we migrated the 3.x data flow to 7 successfully and finally created an INIT info package since the data source was meant for delta extraction. Now, when i schedule my INIT info package, i get an error saying that "Job was terminated in the source system". I also traced this issue in the source system and i found that there was a run time error which says
Runtime error - OBJECTS_OBJREF_NOT_ASSIGNED_NO
"An exception occurred that is explained in detail below. The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not caught in procedure "CRM_BW_CMG_LINKS_INIT" "(FUNCTION)", nor was it propagated by a RAISING clause.
Either the reference was never set or it was set to 'NULL' using the CLEAR statement."
Can anybody help me out with this? What shud i do now?

Hi Sandeep,
Thanks for the useful pointer. Can u throw some more light on this? What exactly does it mean when you say, "Replication of the connection object"? Does it refer to the replication of the Data source or is it something else?

Message while scheduling INIT info-package

Hi Experts,
I can not see anything in monitor and not able to schedule init info-package? any help - appreciated.
Init. select. for field name currently running in request REQU_D8T0NXQ3ITUM8UYN4LOKZEUNE
Message no. RSM1070
Diagnosis
Init. selection for field name with the 'From value' and the 'To-value' , is currently running in request REQU_D8T0NXQ3ITUM8UYN4LOKZEUNE.
Procedure
Wait until the init. selection is completed; check the load status in the Monitor.

Thanks Luis... deleting previous req from scheduler was right option. but now I am getting abap dump...
at code -
if l_rfclogsys <> p_logsys.
message x000.
in function rssm_call_rsar_data_request_1.
It seems l_rfclogsys and p_logsys differs... not sure why this situation, may be the way system connection (source) is defined.

How to Schedule the info package groups?

Hi,
To scheudle the info package group is it enough to shcedule at infopackage group level or do I need to schedule each info pcakages?

Hi ,
You can execute at Group level.
Plz find teh steps for creation and sheduling of IP Group,
1. GO to Adminsitrator workbench RSA1 > Infosources
2. Create your infopackage do not select option but select data load
immediately get out of infopackage prior to going to step 3
3. Click on icon show infopackage groups
(icons are update tree, monitor, display node log, search in subtree,
legend, and show infopackage groups)
4. This will create another window. Now you can create your infopackage
groups. Right Click on folder (infopackage group)
enter long description name, go back to your infopackage and pull it
to the infopackage group
(it's a drag and drop to long description name you just created and
remember it will be on the bottom of the list most likely)
5. Click on infopackage group and its time to select which on to run
first and time your going to schedule it.
INFOPACKAGE
a. Execute package should have a check mark without it itwon't run.
b. Start Sequence (depends on which one you want to run
first for my example its) 1
c. Selection exists (is created when you pull youinfopackage to group)
d. Maintain infopackage is a pencil and will take you therefrom hereInfopackage is your name from the infopackage you pulledover
e. Data type (is created when you pull your infopackage togroup)
Check whether contents was updated without errors beforeyou start next request
(I highly recommend you check this because if will stopyour process if a infopackage fails)
f. Delay until the start of the next request (not necessaryto check)
g. Technical name
Schedule
Selection Options: Immediate (now)Date time (preselected time) if youcheck period and period valueshere it can be run eachday or specific dayAfter job
After event At operation mode
Regards
Marasa.

Info Package-Schedule Jobs in Back ground

Hi,
I want to schedule a job in back ground,I can find that option under schedule tab in the infopackage,
But there is a similar data flow for different data targets when i checked the info package
The column-Job Name Prefix/Sufic is filled with some value
what exactly Job Name Prefix/Sufix will do
Thanks

Hi
Thanks for the info provided,But u misunderstood my question
I want to know what exactly the function of Job name prefix/sufix
in the schedule
Thanks

ABAP routing in info package

Hi All,
I have a requirement where about 1000 document numbers are to be used in the info package. I can wite an abap routine at the info package. Since there are many documents numbers, can I create an info object and load the numbers in it and use a simple select on the info object and compare it with the document no inside the abap routine. Though I have the idea I have not done anything like this before. Does anyone know how I can use l_t_range internal table with many individual document numbers?
Example code will be appreciated.
Thanks,
Alex.

Hi Alex,
I used the following code to upload from a TXT file to the infopackage selection criteria.
Note ": This does not work in Background as GUI UPLOAD does not work in background, so you will not be able to schedule it in a processchain.
data: l_idx like sy-tabix.
          read table l_t_range with key
               fieldname = 'MATERIAL'.
          l_idx = sy-tabix.
          modify l_t_range index l_idx.
          p_subrc = 0.
DATA s_line(18) TYPE N.
DATA t_line LIKE STANDARD TABLE OF s_line.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                      = 'C:\input2.txt'
      filetype                      = 'ASC'
HAS_FIELD_SEPARATOR           = ' '
HEADER_LENGTH                 = 0
      read_by_line                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
IMPORTING
FILELENGTH                    =
HEADER                        =
    TABLES
      data_tab                      = t_line
   EXCEPTIONS
     file_open_error               = 1
     file_read_error               = 2
     no_batch                      = 3
     gui_refuse_filetransfer       = 4
     invalid_type                  = 5
     no_authority                  = 6
     unknown_error                 = 7
     bad_data_format               = 8
     header_not_allowed            = 9
     separator_not_allowed         = 10
     header_too_long               = 11
     unknown_dp_error              = 12
     access_denied                 = 13
     dp_out_of_memory              = 14
     disk_full                     = 15
     dp_timeout                    = 16
     OTHERS                        = 17
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
l_t_range-sign = 'I'.
l_t_range-option = 'EQ'.
LOOP AT t_line INTO s_line.
    l_t_range-low = s_line.
    IF sy-tabix = 1.
      MODIFY l_t_range INDEX l_idx.
    ELSE.
      APPEND l_t_range.
    ENDIF.
ENDLOOP.
If you already have the document numbers, I guess it is easier to load it from a text file instead of creating an Infoobj.
You might need to change the declaration to suit your requirement.
The following piece to be changed as required
DATA s_line(18) TYPE N.
DATA t_line LIKE STANDARD TABLE OF s_line.
Cheers,
Praveen.

Creating Info-Package Groups

Hi All,
We are running a Job through Process chain. But due to some bug it is taking 4 Hrs to complete. We tried executing the Info-Packages manually. It completed with in 30 Mins. So we are planning to create IP group to trigger that Job instead of through Process chain.
Can you please explain how to create the Info Package Group and how to include info packeges in to the IP Group.
After creating IP group we have to schedule a Job to trigger this IP group which inturn triggers the Info packages.
If possible please explain the steps for the above process.
Million of thanks in advance.
Regards,
Reddi.

Hi,
Procedure to create InfoPackage Group
Go to InfoSource tree in modeling of the Administrator Workbench and choose in the standard toolbar of the right area of the screen Show InfoPackage Group.
On the right-hand side of the screen, you will see the InfoPackage group tree.
Highlight a node of the InfoPackage group tree and create a new InfoPackage group using the context menu (right mouse click). This is always inserted underneath the highlighted node.
Select an InfoPackage (in the InfoSource tree in the middle area of the screen) that you want to transfer to the InfoPackage group and move it into the InfoPackage group you want by using drag & drop.
You can assign as many InfoPackages as you like to an InfoPackage group.
InfoPackages with the same selection conditions, same assignment for combination of InfoSource / DataSource / source system, same data type (transaction data or master data), and same data target cannot be assigned to the same InfoPackage group.
Alternatively to the above procedure, you can also create an InfoPackage group in the monitoring view of the Administrator Workbench. However, in this view it is not possible to insert InfoPackages into the InfoPackage Group.
You have created an InfoPackage group and have inserted InfoPackages into the InfoPackage group. You can now
Scheduling an InfoPackage Group
Choose Show InfoPackage Groups in the InfoSource tree of the Administrator Workbench Modeling, or choose the InfoPackages view in Monitoring of the AWB.
Select an InfoPackage group from the InfoPackage group tree and choose Schedule.
You arrive in the scheduler (InfoPackage group maintenance) with the InfoPackages and Scheduling tab pages.
Select the InfoPackages you want to load.
By default, all InfoPackages are selected.
On the tab page InfoPackages, number the InfoPackages that are assigned to the group according to the sequence in which the loading process is to be carried out.
For the InfoPackages, select whether you want the monitor to run a check during the data update to see if the first request from the list has been completely and correctly processed. Only then will the request for which this indicator has been set be processed.
Define a fixed delay of one minute for the individual InfoPackages. The delay represents the wait time until the next request is carried out.
Schedule the InfoPackage group in the background.
-Shreya

******Creation of a loading selection for cube in info package level

Hi,
when we are scheduling the info package(Infp package name is like XYZ),we want to load past 6 months data from the current date(INFO OBJECT(0CREATEDON) BETWEEN (Sy-Datum - 6 months TO Sy-Datum),in the selection tab in schedule i want to write the abap routine (type 6).please can any one have this type of code please sedn to me asap.
this is very urgent.delivery is tomorrow.
Regards
lekha

hi Lekha,
try
data: l_idx like sy-tabix,
l_month(6) type c,
l_dtlast6month like sy-datum.
read table l_t_range with key
iobjnm = '0CREATEDON'.
l_idx = sy-tabix.
DELETE l_t_range
WHERE iobjnm = '0CREATEDON'.
L_t_RANGE-SIGN = 'I'.
L_t_RANGE-OPTION = 'EQ'.
if not work, try
L_t_RANGE-OPTION = 'BT'.
BT = between
current month
concatenate sy-datum3(2) sy-datum0(4) into l_month.
L_t_RANGE-HIGH = l_month.
last 6 month
clear l_month.
l_dtlast6month = sy-datum - 180.
concatenate l_dtlast6month4(2) l_dtlast6month0(4) into l_month.
L_t_RANGE-LOW = l_month.
append l_t_range.
modify l_t_range index l_idx.
p_subrc = 0.
$$ end of routine - insert your code only before this line -
endform.
Re: routine as selection in infopackage
Re: routine as a selection in infopackage 2. Paolo Siniscalco and A.H.P
Re: abap routine

Steps to create Info Packages in BI 7.0

Please Give Steps top create new Info packages in BI7.0

Hi,
Steps to create Generic data source:
If you want to extract the data from MM table in BI Please follow the below steps.
1) Create a view on that table By going in to se11( Do this for future purpose, no need of joining conditon as of now why because view is containing only one table at this juncture)
2) Go to RSO2, create generic data source based on view and designate this datasource under mm application component, it helps to replicate easily from the source system in BI side.
3) While Creating datasource make sure that field selections and selection criteria for fields.
4)Assign it to a package(specified by the team) for transportation purpose. Make sure the dependencies also will be going through request other wise the request may fail.
5) Replicate the generic datasource in BI System(by going in to the mm appln comp under r/3 source system)
6) After replication do create info package, transformations and dtp also.
7) Trigger the Info package and then DTP.
now data will be there in your data target in BI system
Steps to create standard data source
1> Go to RSA5 ,Select what data source u want , CLICK Transferstructure.
2> After dooing this u can see the structure in RSA6 , if u want to do any customozation by adding extra fields u can do it her , if not no need.
3> go to RSA3 and check if the structure is pulling data or not .
BW SIDE
4> Select Source system ->Replicate data source
5> create Transfer rules , update rules and cube and u are done
6> u can create a infopackage and schedule ur data load into the cube or ods.
Hope this helps you
Regards,
Rakesh

Data selection in info package using ABAP routine.

Hi,
when we are scheduling the info package(Infp package name is like XYZ),we want to load past 6 months data from the current date(INFO OBJECT(0CREATEDON) BETWEEN (Sy-Datum - 6 months TO Sy-Datum),in the selection tab in schedule i want to write the abap routine (type 6).please can any one have this type of code please sedn to me asap.
this is very urgent.delivery is tomorrow.

hi Lekha,
try following code.
seems you post the same question twice, one posting is sufficient. and please don't forget to reward helpful answers.
data: l_idx like sy-tabix.
read table l_t_range with key
iobjnm = '0CREATEDON'.
l_idx = sy-tabix.
DELETE l_t_range
WHERE iobjnm = '0CREATEDON'.
L_t_RANGE-SIGN = 'I'.
L_t_RANGE-OPTION = 'EQ'.
if not work, try
L_t_RANGE-OPTION = 'BT'.
BT = between
last 6 month
L_t_RANGE-LOW = sy-datum - 180.
current date
L_t_RANGE-HIGH = sy-datum.
append l_t_range.
modify l_t_range index l_idx.
p_subrc = 0.
$$ end of routine - insert your code only before this line -
endform.

Info Package-'Repair Full Request'

Hello,
In the info package o the scheduler menu there is an option 'Repair full request' what is this for.Could you please give when i can use this option
Thanks

Hello
How r u ?
very important regarding deltas.
Regarding updating data in the enhanced fields
Data can be loaded to a data target even if the data target already contains data from an init load or delta for this DataSource/ source system combination and has overlapping selection criteria.
This option is very useful when doing a full load to an ODS. If you don't mark a full load as Repair when loading to an ODS, you will not be able to do an Init for it.
refer this:
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a65dce07211d2acb80000e829fbfe/content.htm
Best Regards....
Sankar Kumar
+91 98403 47141

Schedule Info package in background

Similar Messages

Maybe you are looking for