Schedule line CT and WMS

hello, friends.
in a scenario without WMS, i split a sales order quantity into several schedule lines.  in one schedule line, i specify the category as CT.
all items are delivered, including the item with sked line cat CT(movement type [blank]) in a separate delivery document.  all deliveries were successfully picked, goods issue posted and collectively invoiced.
however, when i tried this approach in a make-to-order scenario with WMS, the delivery with sked line CT could not be picked (using LT03) or posted for goods issue.   the error messages i got were:
VL608  Delivery has not been completely processed by WM.
VL609  Delivery has not been putaway/picked completely
i also got an error while determining reference movement type for WM via table T156S.
hope somebody can help solve this issue.
many thanks.
jy

hello again.
oooopppsss!!!! sorry, i was able to solve it.
what i did was delete the batch split item, and manually entered the picking quantity and batch in the same line as item 10 (the main item).  goods issue can now be posted.
many thanks.
jy

Similar Messages

  • Link between schedule Line Number and Delivery

    Is there a link between Schedule line Number and Delivery number ?
    Eg. Line item 10 with quantity 100. 
    has 5 schedule lines..with 5 different delivery dates.
    1 .  quanity 40
    2.   quantity 30
    3.   quantity 20
    4.   quanity  6
    5    quantity  4
    For schedule line 1, 2 deliveries were created,
    one      with quantity 20
    another with quantity 15
    quantity 5 is still not delivered.
    also schedule lines 2,3,4 and 5 are fully delivered.
    Is there any table, FM etc in SAP which will give me the link between the schedule line and delivery number ?
    Total deliveries created : 6. - But which delivery corresponds to which schedule line ?
    Please dont tell me to look VGBEL and VGPOS.. that will just give line item number 10.. I need to get the schedule line number.
    Also, RV_SCHEDULE_CHECK_DELIVERIES --> will give me the delivered quantity against each schedule line.
    My purpose is to create an ontime delivery report .
    a report which list each schedule lines, and tell, how many shipments were late/ontime/early etc..
    and for Late ones, how many days late has to be found.
    this is where i need the delivery.
    No. Of days Late = Actual GI Date - Planned GI Date.
    Actual GI date is in the delivery.
    Any suggestions ?
    Thank you in advance.

    Hi,
    Check in the below link.
    relation between VBEP-ETENR and LIKP-VBELN
    Thanks,
    Sree.

  • Multiple schedule lines as and whhen mat is available

    Dear Friends I have a requirement where in I want schedule line to be genrated in sales order for one item as and when qty is avaliable and we run an avail check
    for ex
    There is a need for 20 bags 10 is available   after a few days so 2 schedule lines one stating del not possible n req del date and 2nd stating stating when its available the remaining 20 is ava 30 days from now .........so when its available i want that schedule line seperately ...........how do i get the third schedule line
    Right now even if 10 is avalibale it gives me 1 schedule line stating 20  20  0 (confirmed qty)
    Please let m eknw how i could get new schedule lines  as and when the mat is available
    regards
    madddy

    Of course MR Reazzudin
    well this is a ticket that i have received the customer wants schedule lines to be generated for a material automatically everytime it is in stock..currently even if there is a part of the items are aavailable it shows one schedule line with confrd qty as zero
    i mean if the order is for 10 and if 2 are ava rite now
    there should be aschedule line for 2 first and then wheneger further qty is available there is should be a new schedule line
    I myself am not very clear wit the whole process in background
    further information that i can provide is schedule line used is ZCP
    Req class and type is ZCS made to order stock.
    Thnk u for your time.

  • Availability check box at schedule line level and requirement class level

    Hi All
    What is the significance of availability check field at schedule line level and requirement type level.
    If I remove the check box at schedule line level, then there won't be any availability check carried out in the sales order, even though in requirement class it is checked. Is it for doing availability once the requirement is passed to MRP...
    In make to stock scenario, no availability check is active at schedule line level.
    scenario 1. stock is 0 in plant, when i place an order for 10 quantity, does system give any confirmed quantity on so and so date...or the confirmed quantity will be zero or as there is no availability check carried out, it confirms 10 quantity on customer requested delivery date and the time of creation of delivery, it gives an error message stating zero quantity is available. which one is correct in all the above.
    In make to order scenario, no availability check is active at schedule line level.
    order was created for 10 qty, as there is no availability check active, does the system give some date based on the lead times maintained in the material master or not?
    Regards
    Sree

    Hi sreekar
    The significance of availability check at schedule line level  is to determine weather availability check and TOR should be carried out for sales orders  or not. 
    If you remove check box at schedule line level , availability check and TOR wont be  carried out at sales order level.
    Coming to the scenario you said , make to stock , i think the availability check you are using is 01 make it 02. which is planned requirements. and stratergy group as 10. in MRP3 view in MMR. .
    as the availability check u have put 01 & stratergy group as 10 availability check doesnt carry
    coming to the scenario 2  , if the stock is 0 in plant and if you create a sales order, then the confirmed quantity should be 0 and that particular order will go to backorder processing.
    sometimes it  confirms the ordered quantity as the  confirmed qunatity, and it gives a confiremed delivery date on which the stock is confirmed , but that date is a tentative date.
    all these unconfirmed orders will go to backorders. once the qunatity is confirmed automatically , delivery date also will be done
    Coming to scenario 3 , when you create MTO order there will be availability check checked at the schedule line level. can you tell wat is the schedule line you are getting is it CP or ND?
    for schedule lines , ND - no availability check will be there , PD - availability check will be there
    Note: plz check 1st the availability check you have entered in MMR , if it  is 01 make it as 02. and then run these cycles.
    Reward points if useful and if Any queries let me know
    Regards
    Srinath
    Edited by: sri nath on Mar 21, 2008 7:53 PM

  • Schedule line category and item category

    Hi all,
    Can some body explain what is the use and differences between Schedule line category and item category?
    Where exactly they come into picture when a sales cycle is done? it would be very helpful.
    Thanks in advance.
    Manu

    Hi,
    SCHEDULE LINE CATEGORY:-
    Schedule line Category determines the Schedule lines for the Line item, it will determine whether the Item is relevant for  Delivery or not
    Transfer of Requirements are also controlled
    Availability check at the Sales order is controlled with the Indicator set at SCHEDULE LINES
    For Third Party processing, the Purchase requisition is created based on the Setting at schedule lines
    Together with the ITEM CATEGORY , the schedule lines determine whether the Transaction is Relevant for MRP or not In the Transaction code VOV5
    ITEM CATEGORY:-
    Item category is a significant part in processing the sales document
    Item category determines whether particular item is relevant for Delivery ot not,
    Whether item is relevant for the  Billing
    In Determine the Availability and TOR Item category plays an important role, for example the Availability check at DELIVERY will be taken place based on  the DELIVERY ITEM CATEGORY
    Some Fnctionalities like OUTPUT, TEXT, PARTNER, INCOMPLETION are controlled
    DIP which in the ITEM CATEGORIES is the Main Integration Between SD and PS
    Thanks,
    santosh

  • What is the direct link between Schedule Line item and Delivery line item?

    Hi SAP SD Gurus,
    The question is simple.  I would like to calculate the Open order quantity for a particular month based on the Schedule Line Date.
    I am taking all the Schedule lines falling below the running date of the month and sum up that and look for the deliveries happened for that Schedule lines.
    I am unable to link that Schedule line with that Delivery line item.
    The only link is Schedule Line Number in VBEP table which is not available in LIPS.  I would like sum up the Schdule line Quantities and Subtract the sum of the Delivery quantities which will give me the Open orders for the particular day of the month.
    Can anyone help me to link this VBEP table to LIPS table to connect the Schedule line number with the Delivery line item?
    Thanks in advance for your help..
    Augustine

    Anuj,
    I am aware of the Functional Modules. 
    I wanted to know for this Schedule Line, this is Delivery document created.
    Where in SAP through Tables it is linked?  Because, I need to source the Tables to calulate the open orders by way of external report through Business Object.
    The table link from VBEP to LIPS is not directly linked.  It is linked from Sales order line item level.  Because we are capturing all the Sales order Line tiems through the Delivery Status which is not equalled to C. But if there are partial deliveries against the Scheuld Line item level, we need to identify.  The only common joint should be Scheldule line number which is not available in LIPS.
    If we are developing report inside SAP, we can use the said Functional Modules to capture through Structures VBEPD.  Since it is a external reporting , we need to give correct tables and the joints.  Hence I am looking for any other way to solve this.
    Thanks
    Augustine Ponraj

  • Schedule Line Cat and Passing of Reqs:  Credit Hold Situation

    Business need is for orders that are on credit hold to not pass requirements to create a purchase req. after MRP is executed. I realize that this can be controlled by the Schedule Line Category. So, I would have schedule line category of “XX” on the sales order line. Is there a way for the schedule line category to be changed to a different value (which will allow the passing of requirements to MRP) after the order is released from Credit Hold? How do we get the schedule line category to change on the sales order once the order is removed from credit hold? Can this be accomplished through standard configuration?

    Hi Tom,
      You can use the reason for rejection at the item level.
      But for this you have to maintain somne configuration.Goto sprosd-sales-sales document item--define reson for rejection.
      Here for a particular reason for rejection just put tick under blc column.
      This means the order doesn't require billing.
      Now put the same reason for rejection in your item level.The status of the order would change from open to completed.
      Completed status means that there are no requirements left for this order.
      There will be no requirements in MD04 as well.
      When you want to process the order again just remove the reson for rejection and proceed.
      But there is one problem with this solution.In future if you want to find this order in VA05 ,it will not appear because the status is completed.It would be difficult to find the orders where you put the reason for rejection.
    The only way to find those orders is thru tables.
    Goto SE16 and table VBAP .field is ABGRU.
    In the selectio screen of VBAP put ABGRU and you will get all the orders.
    Reward points if it helps
    Regards
    Karan
    Message was edited by:
            Karan Bhatia

  • Schedule Line Category and Availability checks

    Hi Folks,
    A generic question.
    Wanted to know, how would availability check results influenced if only Item category and MRP type are maintained and not the scheduled line categories.
    Was trying to figure a strange Availability check behavior of non-confirmation for one item category and confirmation for another- item x location being same. The ATP checks settings are maintained and called from GATP. (not R/3 and R/3 customization is not imported too).
    Regards

    closing

  • User Exit/BADI name required for changing schedule lines (VA01 and VA02)

    Hi all,
    Please tell me an exit or badi for modifying VBEP date i.e. VBEP-EDATU which triggers for a change in any of the following fields:
    1. VBAK-KUNNR;   2. VBAK-VDATU  and   3. VBAP-WERKS
    Currently I tried using USEREXIT_MOVE_FIELD_TO_VBEP and FORM USEREXIT_CHECK_VBEP but nothing is giving me the results as desired.
    Pls help, points will b awarded for helpful ans.
    thanks
    Sangharsh

    Have a look at below link which gives details related to user exits in VA01/VA02.
    http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
    I hope it helps.
    Best Regards,
    Vibha
    *Please mark all the helpful answers

  • Using SQVI to generate report of open and released delivery schedule lines

    All,
    I'm using SQVI  to generate an excel spreadsheet for some buyers to show open released schedule lines because they are a 1 line item per scheduling agreement company.
    I used the logical database MEPOLDB instead of a table joint and pulled fields from EKKO(vendor, SA #,&purchasing group), EKPO(Material Number), EKEH(schedule line type), and EKET(delivery date, scheduled qty,previous qty).
    Does this sound like I'll get the results I want on paper as long as I use the right selection criteria, because the report I'm getting isn't quite what I expect? I am unable to identify which lines are authorized to ship vs. trade-off zone, planning, etc. in the report thus far.

    Hi Mark,
                 I have faced same requirement. I am not sure about transporting to TST and PROD. I done by this way.
    After generating SQVI program in DEV , I assigned that program  to a transaction and tested in DEV. Later i have regenarated SQVI in Production. then I assigned the generated Program to same transaction in DEV. And transported the Tcode assignment of program to Production..
    About authorization , if its not sensitive report, BASIS can restrict at transaction level.
    Regards,
    Ravi.

  • Link between Delivery and Sales Order Schedule Line

    Hi Gurus,
    I have a requirement in which i need to display quantity and amount at schedule line level and also the delivery and delivery item for each schedule line.
    For example, if there is a sales order O1 and item 10 for which we have 3 schedule lines and 3 deliveries as well say D1, D2 and D3.
    Report should be something like this
    Sales Order    Item   Schedule Line    Delivery    Del Item   Confirmed Order Qty
    O1                 10      1                       D1           10            5
    O1                 10       2                      D2            10            5
    O1                 10       3                      D3            10            4
    How can i determine that a particular delivery corresponds to which schedule line of that saler order-item?
    We have the link between delivery and sales order but is there any way that we can get the link of delivery at schedule line level?
    Please help.
    Regards,
    Gaurav

    Hi,
    I suppose you must check with SD functional consultant and the post should also be in the logistics SD forum and not BI. But I suppose there is know specific link between the schedule line of SO to the Delivery. It is more like a bucket flow for ex.
    Sale order   Item    Schedule line  qty
    SO1            Item1     Sch1            10
    SO2            Item1      Sch2           10
    Delivery Item QTy
    DO1       IT1   15
    DO2       IT1    5
    In this case qty 15 is distributed over both SO1 and SO2, and SO2 ITem1 Sch2 has link to both the DOs
    So I am not sure if you can establish a one to one link, please check with your SD consultants.
    Regards,
    Ashwin G

  • Is there a DIRECT link between SD schedule lines and delivery lines?

    Is there a direct link (db table) between schedule lines on a sales order (VBEP) and the delivery lines (LIPS)? 
    Is there a function module to retrieve the data?
    Example-
    One order line with 3 schedule lines.
    Each schedule line is for 2 units (total of 6 units).
    Three deliveries made.  1st is for 2 units, 2nd is for 1 unit (backorder), 3rd is for 3 units.
    You can use document flow (table VBFA) or examine the SD document in the delivery line (LIPS) and link the delivery line to the order line.  The schedule line already references the order line.
    I am using math to decrement the schedule lines used and make the link between VBEP and LIPS.  It works fine.  I need four records back....
    1st schedule line for 2 units uses delivery 123
    2nd schedule line for 1 unit (partial) uses delivery 124
    2nd schedule line for 1 unit (partial) uses delivery 125
    3rd schedule line for 2 units uses delivery 125
    Like I said, it works. Just wondering if I missed a more direct link.

    As far as Db link is concern , I don’t remember exactly , but 3 years before I had written a report which see Sales order schedule lines and devilry note lines against sales order.  If you see process wise…. when ever you create PO ( production order you assign some qty using 101 movement type .. and against production order you also give sales order . When you do delivery ( run seclude run ) it delivers against that material number , its movement is 601 ...
    but I remember there’s a link between these tables, VBAP,VBFA AND VBEP , LIPS ...  against every sales order you can see sales invoice ( VBRP,VBRK) and you can also see your delivery note number in document flow .
    I hope this’ll give you some guide line, as right now I can not tell you the exact business process but I remember I written a report in SD 4 years before , in which they required Delivery against production order and sales order ... One more thing you also have production order reference on delivery item number. ( field :Empst ) . I think in my project they were maintaining this field .
    Thanks

  • Link between Schedule lines and delivery quantity

    Hi all,
    At the item level in a sales order, can anyone tell me the link between schedule line data and delivered quantity.
    Schedule line data can be found in VBEP and delivery qty can be found in LIPS. But I want the link between the two. For which partcular date in the schedule line item the delivery qty is displayed.
    Thanks in advance.

    Hi Amol and Rahul,
    Actually I dont want the link between sale order and delivery, I want the link between schedule line dates and delivery qty.
    Hope I am clear.
    Thanks in advance.
    Edited by: Rajini R M on Sep 11, 2008 6:12 AM

  • Schedule Line and Delivery Link

    Hi,
    I need to get schedule line info and its related delivery info. I am unable to link schedule lines ( VBEP- ETENR) to its related delivery. Is there a way to do this ?
    Ex: Order 1, item 1 has 2 schedule lines 1 & 2  with delivery # 11 and 22.
    From VBFA I get 2 deliveries for item 1 but unable to link sch. line 1 to 11 and sch.line 2 to 22.
    SAP does this. Can anyone help on this. How does SAP provide info in doc flow of order where it links sch. line to delivery.
    Thanks !

    Hi,
    Delivered quantity at the schedule line is calculated with function module RV_SCHEDULE_CHECK_DELIVERIES. You have to feed it with document flow from sales order to delivery (FVBFA), schedule lines (FVBEP), status (FVBUP), and sales order item (FVBAP) to get the vsmng filled in FVBEP.
    Also please check the following FM.
    SD_VBEP_ARRAY_READ_VBELN
    SD_VBEP_READ_WITH_POSNR
    SD_VBEP_READ_WITH_VBELN
    SD_VBEP_SELECT
    SD_VBEP_SINGLE_READ
    It will return VSMNG value(s) in table parameter (table strucuture VBEPVB).
    Hope this will help.
    Regards,
    Ferry Lianto

  • Link between actual ship date of an item and schedule line in Sales Order

    So, we are developing a custom report that compares actual Ship Date (Goods Issue Document MKPF-BUDAT) and the date the item should've been shipped (Schedule Line Date).
    I am able to link the GI Document to Delivery Document and can then link to Sales Order Number/Item Number.  However, a line item can have multiple schedule lines.  What logic can be put in the mapping so that the correct scheduling line is picked for the GI date to be compared against?
    Example:
    Sales Order 123
    Item 10 Product X - Quantity 10
    Schedule Line 1: 11/15/2014 8 pieces
    Schedule Line 2: 12/15/2014 2 pieces
    Let's say first shipment gets delayed 2 months and ships 1/15/2015
    Due date in report should know to select 11/15/2014 to calculate that shipment was late 60 days
    Any way to link delivery document to a specific schedule line??
    Thanks!!

    Hello,
    Just did similar development for customer report. List of deliveries based on sales order number and sales order line item numbers. Sort these deliveries either with number or actual goods issue date. Compare goods issue quantity with schedule line quanity and start allocating deliveries to schedule line. For example
    Schedule line 1 - 10 MT, Schedule line 2 - 5 MT. Now you have created 3 delivery. First with 7MT, second with 5MT and third with 3MT. Your first delivery will be for first schedule line. Your second delivery is for first and second schedule line and your thrid delivery will be for second schedule line
    Regards,

Maybe you are looking for