Schedule line, delivered quantity disappeared

We have a sales order with four line items. All are the same material, except the quantities and prices are different. On several of these positions we have had (partial) deliveries. When we check the schedule lines we can clearly see which quantity already has been delivered for that particular line.
Except for item line 20. We have already delivered and invoiced 15.000 pieces, but this is not displayed in the linking schedule line. The total line item quantitiy is 52.500 pieces and this is the quantity we see in the schedule line (already confirmed).
I have check SAP note 717627 and the following is stated there:
A partial delivery is already created for a request item.
If you now set a delivery block at schedule line level, the sent quantity (VSMNG) is no longer assigned to the delivery-blocked schedule line.
The sent quantity may no longer be able to be assigned to a schedule line, because there is no longer a schedule line open at the time of delivery.
This system behavior is standard and intentional.
In R/3 there is no fixed assignment between the delivery and the order schedule line. The assignment is determined dynamically and depends on the delivery-relevance of the schedule line.
If the delivery block is then removed again, a new assignment of the quantities delivered is performed for order schedule lines.
And:
This is intentional, standard behavior.
Could this relate to the problems I am facing?
Message was edited by:
Jan Laros

I have not presented my problem to them. It is ofcourse possible that this SAP note is not applicable for my problem, but I noticed the first paragraphs as relevant.
The problem now seems solved by the way. An order desk/planning empoyees has changed the order quantity and the confirmed quantity to 15.000 pieces. So this line is now fully delivered. Th edelivered quantity is now stated in the schedule line.

Similar Messages

Collectively schedule line with quantity

Dear all
How to see collectively schedule line with quantity in SAP
Rgds

It can be seen if you have created a scheduling agreement, where in you have JIT schedule and normal Forecasting schedule lines.

Schedule lines - Confirmed quantity issue

Hi
I have a make to order material which is purchased from a vendor. A purchase requistion is automatically created every time it is quoted in a sales order.
In a particular case, I had 1 such material which was not in inventory and which could be used while delivering a particular sales order. I posted goods reciept using movement type 501 - E and received it as a part of sales order stock.
Now when I go to the schedule lines screen in the sales order, it shows confirmed quantity as '0' (See screen shot below) and therefore I am not able to deliver this sales order.
[http://i41.tinypic.com/wwgjt4.jpg]
Availability check is configured as in the following screen shot
[http://i44.tinypic.com/290swwg.jpg]
How can I get a confirmed quantity of 1 in the schedule line. Why is not SAP recognizing 1 in sales order stock?
Please help me with this issue.
Regards,
Ketan

Ketan,
The config is acceptable.
SAP generally does not let you enter confirmation quantities manually.
This issue is that you have said you have RELEVANT (sales order relevant) stock on hand, and you cannot get a confirmation.
Now you are saying when you do the ATP check, it does 'nothing'. I am going to assume that you have already checked that the item of the sales order is not rejected.
Normally, during an ATP check, you should have gotten a proposal screen, which will show that 0 or more pieces are available for confirmation. If only zero is available, the system only will give you an icon on this proposal screen which says 'Continue'. You still should get this screen! Since you haven't gotten this screen, There is probably one of three things wrong. Either you have something missing in ATP config, or you have an authorization issue, or you have a userexit that is interfering with the ATP check.
SD ATP settings and config is not simple, and neither is debugging a userexit. This is not an MM issue, this is SD. Consult with your SD team to determine your next step. Or, if you have no SD resource, you should probably repost this message on an SD forum.
Regards,
DB49

Delivery quantity is greater than schedule line confirmation quantity (sales order)

I am creating a sales order with 30 Mt. I confirmed 10 Mt (partial confirmation and based credit block) in schedule line Now I am going to create the delivery system automatic taking 10 Mt but when I am going to change the delivery means when I increase the delivery quantity (20 Mt) then system allowing to do the further process.
As per my understanding system should not allow to increase the delivery quantity m ore the sales confirm quantity.
Please suggest how I can restrict.
Thanks & Regards
Sujit

Thanks for your reply, As you suggest "B" is there. But its not working. For ref. screen shot is attached.
For reference I am providing some more details:
=> We are using "Make to order" process. After creation of sales order we assign the stock to sales order using T-code MB1B , Movement type 412E,
=> Auto credit check applicable
=> Confirmed quantity in schedule line based on credit limit.(Auto credit check at Sales order level)
=> Avail. Check is 02 and check. rule is "AE" .
Thanks and Regards
Sujit

Maintain delivery Schedule line with quantity 0

Hello,
Do you know is it somehow possible to enter 0 quantity to ME38 manually.
If I try to do it, the system does not show the line.
Regards,
jaana

Hi,
Our customer want to see also those weeks when there is no reuired quantities and also they have sometimes needs to change existing quantity let say 10000 kg to be 0. If I now change this 10000 kg to be zero the line will be disappeared from the screen. This requirement is also for the reason that all these lines will be shown on the supplier web and our customer wants to see same kind of screen in the SAP than it is in the Supplier Web.
Regards,
jaana

Schedule lines - commited quantity

Hi experts,
in our system we have sales orders with purchase requisition and purchase order (procured externally). Every vendor have planned delivery time in days (XK03 Purchasing data)
when i make a sales order, the system include weekend days in delivery time calculation. It's possible to exclude weekend from delivery time calculation?
Example:
i create a sales order at 26.05.2011.
material should be procured externally from vendor 10000; vendor 10000 has 4 days for planned delivery time.
system should propose 01.06.2011 as commited quantity ; without weekend
but now, in our system, SAP propose 30.05.2011 as commited quantity date.
It's possible to exclude weekend from delivery time calculation?
thank you.

Hello
Take use of
- Planned Deliv. Time
- Planning calendar
in your material master - MRP2 Tab
Thanks & Regards
JP

CRM Schedule Line Item Quantity

Hi Friends!
I need a help , I want to know where the Quantity field is stored in which table,
I came to know while giving F1 help
<b>Field : QUANTITY
Table name : CRMT_7350_SALES_UI (but this one is structure)
Data element : CRMT_SCHEDLIN_QUAN</b>
I want to know the Table name any body can help me this out please.
Thankyou,
vikram.c

Hi Vikram,
Check out table CRMD_SCHEDLIN in QUANTITY field. you need to provide item guid from CRMD_ORDERADM_I table.
Siva

ME38 Schedule lines not reduced with GR

Hello,
I have an issue where schedule lines in ME38 are not being reduced when a GR is being made. We are using inbound deliveries (LA) when we receive. The on hand gets updated and the MRP reduced gets updated, but ME38 does not. This leaves a schedule that is invalid and when it is sent to the vendor it has schedule lines that are not valid.
Any ideas?

Hi David,
When you Do inbound delivery, is only an advance shipping notification /confirmation for the material.
After the goods arrives, goods receipt has to be posted against this inbound delivery only after which the stock of material will be increased in MMBE, in the schedule lines "delivered quantity" gets updated.
Let me know if you need further information.
Regards,
Maheshwari

How to link Invoice Quantity and Confirmed quantity in schedule line

Hello,
I'm working for a report in BW. The user want to compare the invoice quantity to the confirmed quantity in schedule line for a sales order.
I can't find any table linking these two fields.
Could you help?
Thanks a lot
Jeannie

Ashish,
When we link these two tables by Sales Order Number / Item, we would take following result:
Sales Order    /     Itme     /     Schedule line     /    confirmed quantity   /     actual billed quantity
1                  /      10        /      1                     /    3                            /              5
1                /         10      /       2                    /     2                            /             5
But in fact, for Sales order/itm 1/10, we have only 5 PC billed, not 10.
When billed 5 PC, I want to despatch it to the Schedule line as 3, 2.
Regards,
Jeannie

Schedule Line and Delivery....

Hi Experts,
When I use VA02/3 to diplay a sales order, I select a line item.
I double click the line item, and click the 'schedule line' tab.
In some cases I may have 2,3 or 4 schedule lines...whatever. On the line when a delivery has been made it displays 'delivered qty'.
So shcd line 1 might be 2...shcd line 1 might be 3...BUT which delivery corresponds specifically to each one of the schedule lines?
In my report...I can read vbap, vbep etc and get the sales item data.
I can read VBFA and get the subsequent deliveries. No wehere on LIPS does it reference the schedule line detail i.e. the ETENR which the delivery relates to. The only cross reference is back to the sales order itself.
Yusuf.
Message was edited by:
YUSUF BHORI

Hi Yusuf,
In the Predecssor tab of the Delivery , you will find the Sales Order Doc and item number You can track this link in VBFA ( something that u already have done).
As the standard transaction itself track up to the Sales Order line item only ( note that while creating a delivery u only mention Sales Order , Item ( optional)).
So I dont think it will be possible to line Delivery with the Schedule line delivery quantity.

Open Quantities / relation between Sales Schedule LInes and Doc flow tables

Hi Experts,
I got a requirement, in which I hv to develop a report for the Open quantities for sales order items. fine.
I ssue is that, in the report I hv to show at Schedule line level i.e. VBEP.
So, by pulling the records from VBEP depending on the seldction criteria, I hv to pull the MATCHING record from VBFA for Post Goods Issue.
Then, I hv to implememnt the follwoing formula,
Open Quantity = VBEP, say Schedule line 1 quantity -(mnus) first saved corresponding Order, Item Quantitity-RFMNG in VBFA for PGI type
As we know, VBEP is at Schedule line lvel, where as VBFA is ITEM level!!
So, pls. let me know that,
1 - Is really, we can develop the MATCH btwn VBEP and VBFA tbls, I mean, always, the data will be correctly pulled?
2 - If so, Is the folllwoing statement is OK?
LOOP AT IT_VBFA WHERE VBELV = IT_VBEP-VBELN and POSNV = IT_VBEP-POSNR and ERDAT LE IT_VBEP-MBDAT
3 - Any other good statement for my requirement?
Looks like, functional guy is also NOT much idea, here.
Thanx

no reply

VL01N does not to pick Sales order schedule line quantities

Hi,
I need to get Sales order schedule line quantities into VL01N when creating a Delivery document. Currently irrespective of the schedule line size quantity the existing stock quantity is picked into VL01N.
Is there anyway to get this done? doe it require a user exit modification or cna this be done via IMG.
Thanks & Rgds,
Pradeep
Edited by: PRADEEP GUNAWARDANA on Aug 1, 2009 5:06 PM

Hi DB49,
Thanks for responding.
Let me clarify, the schedule line item i meant was, in my case this is an AFS scenario were we maintain size wise quantities.
My issue being for example;
Sales order line item 10 - Qty 1000 (sizes S - 250, M - 500, L - 250)
Stock created in excess of this requirement, so size S - 1000, M - 1000, L - 1000 in stock
In VL01N, when creating the DN for line item 10, it picks the Quantities in stock (which is 1000 each) ... instead of limiting it to the Sales order quantities of sizes S - 250, M - 500, L - 250.
Hope this is clear ... please advice.
Thanks,
Pradeep

Change the schedule line committed qty in PO items using ME_PROCESS_PO_CUST

Dear Experts,
I want to make the PO item schedule line committed quantity MNG02 field to zero, for this purpose I wrote the logic as below.
but its not changing the committed quantity to zero. Please advice me.
method IF_EX_ME_PROCESS_PO_CUST~PROCESS_ITEM.
DATA: lwa_po_header TYPE REF TO if_purchase_order_mm,
        lwa_mepoheader TYPE mepoheader,
        lwa_mepoitem TYPE mepoitem,
        lwa_mepoitemx TYPE mepoitemx,
        lwa_ekko TYPE ekko,
        lwa_ekpo TYPE ekpo,
        lwa_ekpv TYPE ekpv,
        lwa_eket TYPE eket,
        tp_minqty TYPE min_qty,
        tp_clabs TYPE labst,
        tp_kosch TYPE kosch,
        tp_werks TYPE werks_d,
        tp_tdid type tdid,
        ta_textlines type MMPUR_T_TEXTLINES,
        lwa_textlines LIKE LINE OF ta_textlines,
        lwa_minstk TYPE zminstk.
DATA: schedules TYPE PURCHASE_ORDER_SCHEDULES,
        schedule LIKE LINE OF schedules,
        lwa_schedule TYPE meposchedule,
        tp_mtvfp TYPE mtvfp,
        tp_avqty TYPE BSTMG,
        tp_minqty1 TYPE BSTMG.
if sy-tcode = 'ME21N'.
Get PO Header data
    lwa_po_header = im_item->get_header( ).
    lwa_mepoheader = lwa_po_header->get_data( ).
    MOVE-CORRESPONDING lwa_mepoheader TO lwa_ekko.
Get PO Item data
    lwa_mepoitem = im_item->get_data( ).
    MOVE-CORRESPONDING lwa_mepoitem TO lwa_ekpo.
*-> Get schedule line data
              CALL METHOD im_item->get_schedules
                RECEIVING
                  re_schedules = schedules.
              LOOP AT schedules INTO schedule.
                CALL METHOD schedule-schedule->get_data
                  RECEIVING
                    re_data = lwa_schedule.
*-> Change Committed quantity
                lwa_schedule-mng02 = 0.
                CALL METHOD schedule-schedule->set_data
                  EXPORTING
                    im_data = lwa_schedule.
              ENDLOOP.
                CALL METHOD im_item->set_data
                  EXPORTING
                    im_data = lwa_mepoitem.
    ENDIF.
endmethod.

Hi Siddu,
Please finf enclosed with the suedo code.
DATA: LS_MEPOITEM TYPE MEPOITEM,
            LS_OBJ TYPE REF TO IF_PURCHASE_ORDER_MM,
            LS_MEPOHEADER TYPE MEPOHEADER.
*IM_ITEM is ur importing parameter
in order to get the item details :
LS_MEPOITEM = IM_ITEM->GET_DATA( ).
*In order to get the current document type
LS_OBJ = IM_ITEM->GET_HEADER( ).
LS_MEPOHEADER = LS_OBJ->GET_DATA( ).
Now you have your document type in LS_MEPOHEADER-bsart ...
IF LS_MEPOHEADER-bsart ... = ur custom doc type .
*Set the return item = 'X'.
LS_MEPOITEM-RETPO = 'X'.
    CALL METHOD IM_ITEM->SET_DATA
      EXPORTING
        IM_DATA = LS_MEPOITEM.
ENDIF.
Hope this helps you,,,
Regards,
Deepak.

In which tables deleted schedule lines are stored

Hi All,
I want to know in which tables deleted schedule lines in VA02 VA32 are stored.
How to get the deleted Schedule line item quantity.Please give me reply as early as possible.
Thanks,
Saritha

Hi Saritha,
As my understanding there is no table to store the deleted schedule line data.
You have to identify badi or user-exit before deleting the schedule lines data in the VA02 program and in that exit you have to write the code to populate the deleted schedule line data in to your own custom tables(you have to create custom tables).I have used the same method for deleted deliveries.
In sap CDHDR /CDPOS contains only changed data but not deleted data.
Thanks,
shyla

Bapi or FM or other way to get Schedule lines

Hi All,
Is there any BAPI or FM which can give the schedule lines and quantity as output for given input of Customer, Material, Requested date, Requested quantity, Plant.It would be very helpful if you give any other way to get the above details.
Thanks in Advance,
Raj.

Hi Anji,
We are having a requirement like fetch schedule lines and quantity for given Customer, Material, Requested date, Requested quantity, Plant and then update the schedule lines & quantity of a different plant.
Its not taking from sales order.If you can give any suggestion it would be very useful.
Thanks.
Raj.

Schedule line, delivered quantity disappeared

Similar Messages

Maybe you are looking for