Schedule lines are creating problem in PO-storage location in SAP

Hello Everyone,
We are using SRM 5.0 ECS.
We create the PO in SRM and send it to R/3 backbend system. When we maintain the schedule line in PO(SRM side),the backbend system is not maintaining the correct storage location from purchase req. And when we do not maintain the schedule line in PO(SRM side), the backbend system maintain the correct storage location from purchase req.
So here what can be the reason for this problem?
Regards,
Khushbu.

Please I need help on this.

Similar Messages

MRP schedule lines are not created by MRP

Hi !!
I have a finished product ""111-2523-64"" and in its BOM i have a semifinished product ""111-2523-64-010"" produced(Inhouse)& three raw materials .
For the Raw Materials I have made the scheduling agreement & source list with indicator ("2"" create schedule lines automatically""
Problem -: Now when I run the MRP using T-Code MD02 the system is planning the finished & semifinished product
*but no schedule lines are created for the raw materials.*
Please Guide , Itz very urgent.

Vijay , Pleae clear
I have a doubt
I am having one finished product & in its BOM i have three raw materials.
I have created the scheduling agreement for these three raw materials and source list too.
now when i run the MRp for finished product using t-code md02 the schedule lines must be generated for these three raw materials.
or
i have to run the MRP (seperately using T-Code Md01 ) for these three raw materials
Please guide , its very urgent.

Schedule Lines not created from MRP

Hi !!
I have a finished product ""111-2523-64"" and in its BOM i have a semifinished product ""111-2523-64-010"" produced(Inhouse)& three raw materials .
For the Raw Materials I have made the scheduling agreement & source list with indicator ("2"" create schedule lines automatically""
Problem -: Now when I run the MRP using T-Code MD02 the system is planning the finished & semifinished product
*but no schedule lines are created for the raw materials.*
Please Guide , Itz very urgent.
Regards
Rahul Bhardwaj
9909986406

Dear Rahul,
When u r running MRP maintain '3' for Delivery Schedules Field under MRP Control Parameters ( T Code MD02). Sheduling Agreement should be valid. If there is sufficient stock on hand compared with the requirement then system will not create any Schedule Lines. In material master of raw Materials on MRP2 view Procurement Type should be Maintained as 'F'. If u have maintained 'E' or 'X' then MRP run will not create schedule lines.
Regards
Sunil Kumar

Schedule line getting created for material whose stocks are maintained

Hi Friends,
I am having an unusual problem of schedule line getting created for material whose stocks are there in the system. I have created an SO for some material, and all the material is having sufficient qty in the system but still the system is generating schedule line.
Can someone please advice what could be the problem and the solution to it.
Regards,
Wasim.

Hello Wasim,
- In TCode MM02, Check Scheduling in MRP2 Tab of Material master (if MRP is active.)
- In Tcode OVZ9 - AvC control, for your Availability check maintain (eg. 02) in material & Checking Rule:A-SD order.
Whether Check availability without replenishment lead time is unchecked, as this Indicates whether, during the availability check, the system checks the replenishment lead time. So, Items for which the delivery date falls within the replenishment lead time, but for which there is no inventory, are confirmed for delivery after the replenishment lead time. In the case of items for which the delivery date falls after the end of the replenishment lead time, the system assumes that everything can be confirmed.
Thanks & Regards
JP

Schedule Lines are not getting generated after MRP run.

Hi,
I have an issue where a SA exists for the parent material with item category L (subcontracting). The parent material has a valid BOM and some sub components as well. I see in CS03 that BOM is fine with validity dates for the parent material. A valid source list also exists for the parent material where SA is present as the source of supply with MRP indicator as 2. Now when i run MRP for the parent material using MD02 (NETCH), with indicators as below:
Create pur.req. 2
Schedule lines 3
Create MRP list 1
Planning mode 1
i don't see any schedule lines in MD04. Instead it creates a PR that too without any source of supply.
In master data for the parent material MRP type is PD with Procurement type F and special procurement key 30. I have checked and every thing seems to be fine still MRP run doesn't create schedule lines.
Any help is appreciated. I can give more info if required.
Thanks.

Dear Rakesh,
Scheduling agreement:An outline agreement against which materials are procured at a series of
predefined points in time over a certain period.
1.For this you have to first use ME31L for creating scheduling agreement and then ME38 for maintaining scheduling agreemnet
schedule.
2.Ensure in the source list after maintaining the material,vendor combination the setting for MRP relevancy is set to 2 - Record
relevant to MRP,Schedule line generated automatically.
Moreover you have to use value 3 for delivery schedule line which is one of the MRP control parameter while taking MRP run.
So for the materials for which scheduling agreement exists,schedule lines will be generated.
Check and revert back.
Regards
Mangalraj.S

Schedule lines are not getting generated during MRP Run

Schedule lines are not getting generated during MRP Run. I have maiantained source list for the material with proper validity date and also maintained scheduling agreement . MRP relevvant Indicator , I have marked - 2 which means -Record relevant to MRP. Sched. lines generated automatically.
Still I am not able to get schedule lines and instead of that *Purchase Requisitions* are getting generated.
Can any one help me and suggest me what to be done in this case .
Thanks & Regards ,
Nirmalya

Dear,
Welcome to SDN,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.
Regards,
R.Brahmankar

Schedule lines are not in sink for PO

Hello Everyone,
We are using ECS.
So we create PO in SRM with some schedule lines and transfer it to the ECC system.
But sometimes the schedule lines are not in sink on both the sides because buyer update the schedule lines on SRM side.
So we need to check that is schedule lines in SRM and Basic quantity in SRM are same or not?
So is there any OSS note to check this?
Regards,
Khushbu.

Hi,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.

What is process through which schedule lines are cofirmed in Sales Order

What is the process through which schedule lines are cofirmed in Sales Order

Hi,
Schedule lines get confirmed on the basis of backward or forward scheduling carried out by system based on Material Availability date.
Regards
SD
Message was edited by:
Samier Danish

Replicating storage locations from SAP SRM

Dear Experts,
How to replicate the storage locations from ECC to SAP SRM? How you can restrict the selection of storage location in SAP SRM based on the plant selection? i.e. plant 1000 has three storage locations say 1001, 1002, 1003. Now, when the user selects the plant 1000 as delivery address in direct procurement scenario, then the system should allow only the three values in value help?
Thanks and regards,
Ranjan

HI Ranjan,
Did you try by removing 'Storage Locations" from Extended Attributes in PPOMA_BBP?
thanks,
Rahul Mandale

Scheduling lines are not created in mrp running

Line 1 & 2 are having same items with different schedule lines qty 250 & 275 nos. respectively. Stock was 250. System bokked stock 250 against line 1 & given proposed delivery date for line 2. In MM module, by running MRP system generated requirement only for 25 pcs.(may be it taken again stock 250 against line 2 in consideration while running MRP). This is happened in various cases.KINDLY HELP ME in solving this problem.
REGARDS,
G.V.SHIVAKKUMAR

Hi,
With my experience I will share something:
1) Do you have valid Schedule Agreement?
2) Have you entered Sch. Agreement number in source list?
3) Have you selected MRP as " 2 " in source list?
With your earlier checks, please chekc these also.
Karthik Params

Schedule lines getting created even when material is there in stock

Hi Friends,
I have configured a normal material and have sufficient stock also, but when I am creating a sakes order the system is generating schedule line for the material even when I have stocks.
Can someone please advice what could be the problem and the possible solution.
Regards,
Wasim.

Dear wasimuddin.sayed,
When you are creating sales order definitely system will create the schedule line for Confirm delivery date and delivery QTY.
that is the functionality of schedule line.
now if you don't have stock at plant level on the same date then as per availability configuration system will confirm the another schedule line on which confirm delivery date and qty will be available.
if not satisfy the answer request you to elaborate the question in detail.
Best Regards
Hanumant

Schedule line getting created even when material is in stock

Hi Friends,
I have configured a normal material and have sufficient stock also, but when I am creating a sales order the system is generating schedule line for the material even when I have stocks.
Can someone please advice what could be the problem and the possible solution.
Regards,
Wasim.

Dear wasimuddin.sayed,
When you are creating sales order definitely system will create the schedule line for Confirm delivery date and delivery QTY.
that is the functionality of schedule line.
now if you don't have stock at plant level on the same date then as per availability configuration system will confirm the another schedule line on which confirm delivery date and qty will be available.
if not satisfy the answer request you to elaborate the question in detail.
Best Regards
Hanumant

Schedule lines are not getting generated through MRP

Hello Experts,
While running MRP, we observed that the system is creating PR instead of schedule lines, although all the necessary prerequistes to generate schedule lines through MRP are maintained. For e.g.
1. MRP Schedule line relevant indicator '2' is maintained in the Source List.
2. Sch. Agreement dates and Source List validity dates are same.etc...
Further after some analysis, we observed that if we change the source list validity from date to some back date then system is creating correct schedule lines.
Example: Material M1; Planned delivery time 7 days; GR processing time 5 days; MRP Type PD; Lot Size WB;
SA validity dates - 07.09.2011 to 31.12.2011
Source List validity dates - 07.09.2011 to 31.12.2011
If MRP run on 12.09.2011 and source list dates are retain same as mentioned above, system creates the PR.
If MRP run on 12.09.2011 and source list dates changes to 05.09.2011 to 31.12.2011, system creates the schedule lines.
Could you please let us know, why the system behave like this?

Dear,
Welcome to SDN,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.
Regards,
R.Brahmankar

Automatic schedule lines not creating after MD03

HI Gurus,
When I am running MD03 system is creating Pur. Requisitions instead of Schedule lines
I am running with
NETCH
2
3
1
1
1
29102011
Data maintained
1.Material master /vendor master Auto po ticked (MRP type VB ROP 500 ,Safety stock 600, current stock 200)
2.Sch. Agreement created with LP (validity period, Qty ok)
3.Pur. Info rec maintained for vendor material for the plant.
4.Source list maintained with Vendor,scheduling agreement no ,item no, MRP indicator 2 Fixed vendor ticked
Now after Running MD03
Pur. Req created for 400 qty
but when I click on Procurement proposal manually I can select Del. Schedule and create
but system is asking Agreement no. item,qty etc (I already maintained Source list system is asking again )
Then why not system creating automatically..
Please help..
Thanks in advance

Thanks Jürgen,
It was a problem of Date ,validity period of the SA.
which I sort out any way thank you. for your input

Schedule lines are not coming for HALB after MRP run

Dear All,
I am not getting schedule line after mrp run, inspite of all required setting only purchase requisitions are coming.
Material type is HALB and involve a subcontracting process (30). For raw material I am getting the schedule line but in the case of HALB, it is not coming.
Pls let me know if I am missing something and guide me further on this.
Thanks & Regards
Kundan Kumar

Hi,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.

Schedule lines are creating problem in PO-storage location in SAP

Similar Messages

Maybe you are looking for