Schedule Lines are not getting generated after MRP run.

Hi,
I have an issue where a SA exists for the parent material with item category L (subcontracting). The parent material has a valid BOM and some sub components as well. I see in CS03 that BOM is fine with validity dates for the parent material. A valid source list also exists for the parent material where SA is present as the source of supply with MRP indicator as 2. Now when i run MRP for the parent material using MD02 (NETCH), with indicators as below:
Create pur.req.  2
Schedule lines   3
Create MRP list  1
Planning mode   1
i don't see any schedule lines in MD04. Instead it creates a PR that too without any source of supply.
In master data for the parent material MRP type is PD with Procurement type F and special procurement key 30. I have checked and every thing seems to be fine still MRP run doesn't create schedule lines.
Any help is appreciated. I can give more info if required.
Thanks.

Dear Rakesh,
Scheduling agreement:An outline agreement against which materials are procured at a series of
predefined points in time over a certain period.
1.For this you have to first use ME31L for creating scheduling agreement and then ME38 for maintaining scheduling agreemnet
schedule.
2.Ensure in the source list after maintaining the material,vendor combination the setting for MRP relevancy is set to 2 - Record
relevant to MRP,Schedule line generated automatically.
Moreover you have to use value 3 for delivery schedule line which is one of the MRP control parameter while taking MRP run.
So for the materials for which scheduling agreement exists,schedule lines will be generated.
Check and revert back.
Regards
Mangalraj.S

Similar Messages

  • Schedule lines are not getting generated during MRP Run

    Schedule lines are not getting generated during MRP Run. I have maiantained source list for the material with proper validity date and also maintained scheduling agreement . MRP relevvant Indicator , I have marked - 2 which means -Record relevant to MRP. Sched. lines generated automatically.
    Still I am not able to get schedule lines and instead of that *Purchase Requisitions* are getting generated.
    Can any one help me and suggest me what to be done in this case .
    Thanks & Regards ,
    Nirmalya

    Dear,
    Welcome to SDN,
    In transaction OMDT you have to enable the indicator create schedule lines
    In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
    Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
    If u run MRP properly u will get schedule lines automatically in ME38.
    Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.
    Regards,
    R.Brahmankar

  • Schedule lines are not getting generated through MRP

    Hello Experts,
    While running MRP, we observed that the system is creating PR instead of schedule lines, although all the necessary prerequistes to generate schedule lines through MRP are maintained. For e.g.
    1. MRP Schedule line relevant indicator '2' is maintained in the Source List.
    2. Sch. Agreement dates and Source List validity dates are same.etc...
    Further after some analysis, we observed that if we change the source list validity from date to some back date then system is creating correct schedule lines.
    Example: Material M1; Planned delivery time 7 days; GR processing time 5 days; MRP Type PD; Lot Size WB;
    SA validity dates - 07.09.2011 to 31.12.2011
    Source List validity dates - 07.09.2011 to 31.12.2011
    If MRP run on 12.09.2011 and source list dates are retain same as mentioned above, system creates the PR.
    If MRP run on 12.09.2011 and source list dates changes to 05.09.2011 to 31.12.2011, system creates the schedule lines.
    Could you please let us know, why the system behave like this?

    Dear,
    Welcome to SDN,
    In transaction OMDT you have to enable the indicator create schedule lines
    In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
    Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
    If u run MRP properly u will get schedule lines automatically in ME38.
    Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.
    Regards,
    R.Brahmankar

  • PR,s not getting generated after MRP run

    Dear All,
    I'm running MRP through MD51 for WBS element where RM's are attached to WBS.
    It is MTO scenario where no stocks of RM's are maintained. I have checked all relevant settings of Masters.
    After running MRP through MD51, system is not proposing PR's for RM's but when i run the MRP for independent FG (MD02 & MD03) system is proposing PR's.
    Please suggest & help.
    Thanks in Advance.
    Shaiz

    Little confused on your statement
    System is not proposing PR's for RM's but when i run the MRP for independent FG (MD02 & MD03) system is proposing PR's.
    I would like to Know, whether the FG is attached with WBS or RM?

  • Schedule lines are not getting confirmed even though stock is there

    HI,
    i want to discuiss one sensitive issues which is a simple one.
    my schedule lines is not getting confirmed even stock is there at sales order.
    there is no delivery block.
    there is no minimum stock level.
    there is no credit check for that.
    there is stock of 2 EA in that plant and storage location, but stock is not getting confirmed at sales order level or transaction level.
    even stock is there it is going to avaliability check overview screen and giving stock confirmation after 12 days.
    even i checked all the dates.............but its of no use.
    what to do ?
    after testing all the possible options i am taking help from
    please help me in this regard,
    regards,
    balajit

    Hi
    you need to check the following.....
    First check the Factory calander of your plant whethear some holidays or not
    Second most importantly you have to check which stretagy group is assigned  in the material . whethear it is make to order or make to stock. change it as make to stock.
    "What happened if material stretagy group is make to order then from sales order system generate requirement of that material against that particular stock, that time system do not consider the unrestricted stock and not confirm schedule line."
    Regards
    Shambhu Sarkar

  • Demand not getting generated on MRP run.

    Hi All ,
    We have an trouble ticket. For a particular sales order , the user has run the MRP , but no planned order is generated . So she cannot convert the planned order to production order .
    When she tries to create a production order with T-code CO01 , She gets the error message ," Sales order does not allow Make to Order production"
    Diagnosis :- Sales order entered is not to be included in Make to Order Production.
    System response:- Account assignment can only be carried out with sales order created with requirement type for Make to Order production.
    Please note :- We have many other production orders running for the same material in the same plants for different sales order . There is no problem with them except this sales order.
    Following are the details for the material :-
    Planning strategy:- 25
    Procurement type :- E
    Kindly advise  . Thanking you.
    Kind Regards
    Ayaz A Khan

    Dear,
    Are you getting Message no. 61155?
    In particular, the above-mentioned error messages are displayed  if a planned order is not  assigned to a sales order but the sales order number or the sales order item is not yet known when the account assignment data of the planned order is checked.
    Check the requirement type in sale order and account assigment.
    Create a production order with T-code CO08 with reference to sales order.
    Then please refer this link,
    Sales order does not allow make-to-order production

  • Schedule lines not generated after MRP run

    Dear All,
    I am trying to create Schedule lines through MRP run , but instead system creates MRP element PRqRel  and its PurRqs when i check in MD04 ,  the following are the prerequisite i done before MRP run , but still Schedule lines are not generating.
    1.activated checkbox source list in material master.,Procurement type is F, MRP type PD , lot size MB , marked JIT  Scheduling indicator as 1 in Pur view of material master , no MRP group is used in our process.
    2.Maintained Inforecord.
    3.Maintained source list for the material and marked MRP relevant as 2. Validity also checked.
    4. Quota arrangement for this vendor only.
    5. Created New scheduling agreement.
    6. Material is not sent for subcontracting.
    7. Ran  MD02 with following parameters ,
    Processing key NETCH Net Change in Total Horizon
    Create purchase req. 1 Purchase requisitions in opening period
    Delivery schedules 3 Schedule lines
    Create MRP list 1 MRP list
    Planning mode 3 Adapt planning data (normal mode)
    Please let me know if i am missing something
    Thanks in Advance
    Benny

    Hi,
    Please check the below links...
    Schedule Lines not getting created in MRP
    Schedule Lines not generated for MRP Type PD
    Kuber

  • Schedule lines are not generating properly in MD04

    Hello All,
    I have a issue in MD04, in which schedule line for Schedule agreement is not getting generated on the same day as sales order is created (09.05.2014). But Schedule line is getting created in different date. Because of which i am creating schedule lines manually at required dates. 
    Note: I have attached screen shot of MD04
    Kindly help me to overcome this issue.
    Regards,
    Manoj  

    Hello Manoj
    Please observe that there are rescheduling exception messages and rescheduling dates for your scheduling agreements. It generally happens when you have sales orders in the past and you don't allow "start in the past" for replenishment proposals generated by MRP.
    Go to the customizing transaction OPPQ and change the customizing "start in the past". After that, run MRP again for your material and the schedule line dates should match the sales order. Please observe that firmed schedule lines wont't be changed.
    BR
    Caetano

  • Proposals are not getting generated for BOM items in MD50

    Hi Gurus,
    I have maintained strategy 50 in MRP for header material , Item category gp as LUMF & maintained consumption parameters in material master .
    For dependent requirements i have maintained BOM for production & sales usage, Strategy is blank as it is customer specific component , Item category gp is NORM , individual requirements i.e 1 in MRP 4 view.
    MRP type is PD in both materials.
    When i run a MRP thru' MD50 after getting customer order.
    it is not planning my dependent requirements i.e. proposals are not getting generated for dependent requirements (BOM materials).
    Please let me know the solution.
    Thanx in advance
    Regards,
    Nagraj Vasmate

    try to use strategy 20

  • Schedule lines are not in sink for PO

    Hello Everyone,
    We are using ECS.
    So we create PO in SRM with some schedule lines and transfer it to the ECC system.
    But sometimes the schedule lines are not in sink on both the sides because buyer update the schedule lines on SRM side.
    So we need to check that is schedule lines in SRM and Basic quantity in SRM are same or not?
    So is there any OSS note to check this?
    Regards,
    Khushbu.

    Hi,
    In transaction OMDT you have to enable the indicator create schedule lines
    In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
    Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
    If u run MRP properly u will get schedule lines automatically in ME38.
    Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.

  • Early Watch Reports are not getting generated.

    Hi Experts,
    I'm new to Solution Manager.
    We were getting EWA report regularly till last month in solution manager.
    But for the past one month the reports are not getting generated and I'm getting the following error message.
    Kindly help
    The data for this session is overdue. Data has not yet been transferred from the associated satellite system.
    Go to the Service Data Control Center (transaction SDCCN) in the satellite system and check why the data has not been sent.
    Typical sources of errors are:
    The RFC connection for the SAP Solution Manager system is not working.
    The 'Task Processor' background job, which collects the session data, has been changed.
    Problems arose while data was being collected (see the detail log for the task that collects the session data).
    A periodic 'SDCC Maintenance Package' task has not been scheduled to check whether your SAP Solution Manager system requests session data.
    Session number: 1000000000704
    Thanks,
    Shanahas

    Hi,
    The maintanance package is getting executed everyday. However, it is throwing some error.
    I have checked the RFC connection and they are working fine.
    Here with I'm attaching part of the log i got for the maintance package error.
    Pls help
    Maintenance Package completed
    > Maximum number of retries reached ( 0003 )
    Updating license data completed from destination SM_SOMCLNT100_BACK [Maintenance Package]
    Error updating license data from destination SM_SOMCLNT100_BACK [Maintenance Package]
    Retrieval of license data failed from destination SM_SOMCLNT100_BACK
    > ( AGS_MK_GET_MAINT_KEYS )
    > Function module for retrieval of license data not available on Solution Manager
    Updating license data started from destination SM_SOMCLNT100_BACK [Maintenance Package]
    Error refreshing service definitions from destination SM_SOMCLNT100_BACK
    > Password logon no longer possible - too many failed attempts
    > error reading function module interface BDL_DO_SESSION_REFRESH_NEW from SM_SOMCLNT100_BACK
    > Re-entry after error
    Refresh of service definitions started from destination SM_SOMCLNT100_BACK [Maintenance Package]
    Refresh sessions from destination SM_SOMCLNT100_BACK finished [Maintenance Package]
    > Sessions cannot be refreshed from destination SM_SOMCLNT100_BACK ( SOM , 0020312095 )
    > Password logon no longer possible - too many failed attempts
    > error reading function module interface DSWP_API_SESSIONLIST_GET from SM_SOMCLNT100_BACK
    Refresh sessions from destination SM_SOMCLNT100_BACK started [Maintenance Package]
    Refresh sessions from destination SDCC_OSS finished [Maintenance Package]
    > Sessions are up to date
    Refresh sessions from destination SDCC_OSS started [Maintenance Package]
    > Not due, due every 7 day(s), last successful run 10.07.2011 21:20:24
    Delete old session and log data :
    Maintenance Package started
    Thanks,
    Shanahas

  • Nohup.log files are not getting generated correctly

    hai,
    im a weblogic administrator. Here is my problem in weblogic. My partner has complained that nohup.logs are not getting generated properly. Like for every 5 mins a new nohup .log file is getting generated. But almost 4 to 5 logs are of 0 size and after that the 6 log file is very hug ( around MB). And the status of the managed servers is in FAILED state. When i checked the nohup logs, i can see "E297: Write Error In Swap File" and also the below error. But when i checked the disk space it is only 30 % full. Please suggest me something that can help me in this. Why is this behavior in the nohup.logs? have anyone faced anythign like this? Please help me.
    But after the recycle everything is fine. But i want to know what went wrong and why it got recovered after the recycle.
    <Feb 11, 2010 7:43:59 AM CST> <Error> <HTTP> <BEA-101246> <Error occurred while flushing HTTP log file for the Web server: wl38_managed1
    java.io.IOException: Disk quota exceeded.
    java.io.IOException: Disk quota exceeded
    at java.io.FileOutputStream.writeBytes([BII)V(FileOutputStream.java:???)
    at java.io.FileOutputStream.write(FileOutputStream.java:260)
    at com.wily.introscope.agent.probe.io.ManagedFileOutputStream.write(ManagedFileOutputStream.java:423)
    at weblogic.utils.io.DoubleBufferedOutputStream.flushBuffer(DoubleBufferedOutputStream.java:58)
    at weblogic.utils.io.DoubleBufferedOutputStream.flush(DoubleBufferedOutputStream.java:157)
    at weblogic.servlet.logging.LogManagerHttp$FlushLogStreamTrigger.trigger(LogManagerHttp.java:522)
    at weblogic.time.common.internal.ScheduledTrigger.run(ScheduledTrigger.java:243)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
    at weblogic.time.common.internal.ScheduledTrigger.executeLocally(ScheduledTrigger.java:229)
    at weblogic.time.common.internal.ScheduledTrigger.execute(ScheduledTrigger.java:223)
    at weblogic.time.server.ScheduledTrigger.execute(ScheduledTrigger.java:50)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)

    according to error message, your partition size have not enough disk space from where you are running nohup command. check with df -kh.

  • Application logs are not getting generated in OIM 9.1.0.2

    Hi guys,
    We have created schedulers in OIM using OIM api to create,modify and delete the users.All our schedulers working fine.and we are able to do all the opeartions quite some time back.But we are facing an issue where the logs not getting generated when we run the schedulers.But while creating/modifying/deleting users from OIM webconsole we are gettinng the logs.Any help would be appreciated.
    Thanks,
    Pavan.

    Have you configured the logger in your ljava class as well as log.properties of OIM

  • Schedule lines are not coming for HALB after MRP run

    Dear All,
    I am not getting schedule line after mrp run, inspite of all required setting only purchase requisitions are coming.
    Material type is HALB and involve a subcontracting process (30). For raw material I am getting the schedule line but in the case of HALB, it is not coming.
    Pls let me know if I am missing something and guide me further on this.
    Thanks & Regards
    Kundan Kumar

    Hi,
    In transaction OMDT you have to enable the indicator create schedule lines
    In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
    Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
    If u run MRP properly u will get schedule lines automatically in ME38.
    Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.

  • Schedule lines are not coming after MRP run for HALB material

    Dear All,
    I am not getting schedule line after mrp run, inspite of all required setting only purchase requisitions are coming.
    Material type is HALB and involve a subcontracting process (30). For raw material I am getting the schedule line but in the case of HALB, it is not coming.
    Pls let me know if I am missing something and guide me further on this.
    Thanks & Regards
    Kundan Kumar

    Dear All,
    I am closing this thread. As the vendor mentioned in scheduling agreement is not a subcontracting vendor. Its a individual vendor.
    Thanks for all the reply.
    Thanks & Regards'
    Kundan Kumar

Maybe you are looking for

  • FTP'ing the BI Publisher report

    if i ftp'ing the report from BI Publisher will that report save in the Database? if i do the normal scheduling(to email's) of that report from publisher will that report first save in database then deliver to scheduling emails? Edited by: user1225547

  • Install oracle 9i on linux server

    Hi, I must install oracle 9.2.0.7 on linux server but when i run runinstaller i have this errors: $ ./runInstaller $ Initializing Java Virtual Machine from /tmp/OraInstall2006-09-20_01-52-01PM/jre/bin/java. Please wait... Error occurred during initia

  • How to bring Job Posting tab page in Requisition Maintenance?

    Hi All, I want to know how to bring the Job Posting tab page in Requisition Maintenance? As SAP help document says, before creating Job Posting you should create the corresponding requisition. I can able to create the requisition as a requisition man

  • Where are Flash CS4 settings saved?

    Anyone know where Flash CS4 settings are saved [folder location]? Such as keyboard settings, preferences, commands, etc.? I want to be able to back them up and copy them to another PC. Thanks.

  • SECATT in ecc6

    Dear Experts, While creating SECATT (after completing recording....during parameterization), i am facing an error.... Screen Simulation : Wrong screen ID for simulator Data. plz guide .. Thanks DM