Schedule Lines - fixed Date and Qty checkbox

Hi Experts,
When an order is placed, on the schedule line tab there is a check box for a fixed date and qty. Can this only be set manually or can it be set by customer number.
Thanks in advance.
Mike

Hi,
When the availability check will happen in that screen you can see fixed date and quantity If you check that it will automatically copied in schedule line .
If you leave the field blank, the delivery date and confirmed quantity are not fixed. If you are able to expedite either the manufacture or purchase of goods, you may be able to deliver the goods closer to the customer's original request (and sooner than the date the system confirmed).
Regards,
Krishna O

Similar Messages

  • Credit release ignores Fixed date and qty and re-schedules the line

    Hi,
    If I create an order with the following schedule:
    date                 conf qty
    24.10.2008     110
    25.11.2008     89,889
    25.12.2008     10,000
    Fixed date and qty is checked
    Save the order (its credit blocked)
    Then look back and the confirmed qty shows 0 (as expected)
    Then credit release the order in VKM1 or VKM3 and look at the schedule lines they have changed!
    24.10.2008   110
    25.11.2008   99,889
    The system realised it could deliver some earlier than my schedule.
    However the reason I checked "Fixed date and qty" is because the customer wanted the goods delivered as per the original schedule.
    When you set this indicator it protects the lines from automatic re-scheduling (trans V_V2) but it seems the credit release screen ignores the indicator
    How do we fix this?
    We confirmed the dates to our customer as per the original schedule so if we deliver them before this date the goods will be refused.
    Many thanks
    Rob

    Hi Tom,
    One down effect is that the order will not enter into the rescheduling, the system considers it irrelevant. So if you are using the rescheduling functionality and want the order to be part of it, then you should consider this.
    Michael

  • Fixed date and qty in slines

    Hi,
    In schedule lines tab page (double click on item)
    We have filed in the left hand side fixed date and fixed qty what is the imp to that filed where we maintain that setting (if I want see in configuration where can I see ..pls argnt………

    Dear Murli,
    You can see the configuration using the following path:
    SPRO> Sales and Distribution>Basic Functions>Availability Check and Transfer of Requirements>Availability Check-->Define Default Settings.
    The use of the above settings is as follows:
    For each sales area which is a combination of sales organization, distribution channel and division, you can set an indicator for fixing the date and quantity as well as a rule for transferring the results of the availability check.
    - Fixed date and quantity
    In this field, you specify for a sales area whether the delivery dates and delivery quantities confirmed after an availability check should be set.
    - Rule for transferring the availability results
    In this field, you can specify the system response to shortage for a sales area. The following responses are possible:
    The system displays the different options (for example, one-time delivery, full delivery) for selection in a dialog box.
    The system automatically chooses an option (for example, confirmation of a delivery proposal).
    Hope the above helps you.
    REWARD if it helps you!!
    Regards,
    Ajinkya

  • Calculate all days in month from schedule line delivery date for 12 mths

    Hi experts,
    I am trying to solve a problem and would appreciate any help! Im on BI7.
    The user will input a date for the schedule line delivery date via a variable.
    From this date I need to go forward 12 months exactly and display a key figure (outstanding value) by months but the first and last months must only use the days in that month i.e not the whole month if not selected by the user.
    I.e if the user types in 13.05.2008
    The display need to show (columns)
    May 08 (13th to end of May 2008)
    June 08   (All)
    July 08    (All)
    August 08    (All)
    Sept 08    (All)
    Oct 08     (All)
    Nov 08     (All)
    Dec 08    (All)
    Jan 09     (All)
    Feb 09    (All)
    Mar 09    (All)
    April 09   (All)
    May 09  (1st to 12)
    So I neen to restrict the key figure (Outstanding Value) by Schedule Line Delivery Date and display as above on a 12 month forecast basis from the day (sch line delivery daye) entered as a variable by the user.
    I also need the first month to only show the dates in the month remaining including the date entered as a variable. The last month must go up to the day before exactly a year in front.
    I have created the 12 months as a structure and can include the key figure and the schedule line delivery date. The schedule line delivery date for each period needs to be restricted. How can I do this to achieve the above?
    Thanks in advance. Will assign good points for a speedy solution.
    Best
    Steve.

    Hi,
        Check "OVLY" and "OVLZ" and If the sceduling is active for he shipping point /sales document type.  Check "OVXD" and see If the Loading time/ Pick/pack time is determined from it. If they are getting determined from shipping point check the shipping point calender in "SCAL" .If it has saturday and sunday as holidays ,then you may have to change them. And check If the customer has goods recieving hours assigned to him (In customer master unloading point). If he has only 5 working days and If he accepts only goods at 8 am in the morining then system would propose like this.Kindly please let me know If you need any more Information on this.
    Regards
    Ram Pedarla

  • Impact of Fixed date and Delivery

    Dear All,
    I can see a check box "Fixed date and Delivery" in Scheduline category" tab in the Item level of the Sales Order.
    I am not sure about the impact of this check box.
    I thought, if this check box is checked, system will allow to create delivery on this particular date only. But system allowed me to create deliveries after this date also.
    Then what is the exact use of this check box.
    Could anyone explain.
    Regards,
    Mullairaja

    Hi Raja,
    this check box is used,
    suppose you have created the sales order and then schedule line has appeared in SL tab page that means it has proposed the date of delivery date and to fix the MRP from schedule line date.
    that means if you are indirectly stating to the system that, these lines go on that date only and dont change the date of SL if RE-ATP check happens.
    balajia

  • Fixed Date and Quantity for Sales order

    We have Requested Delivery Date in our order entry page in CRM ISA. This date is transferred fine to R/3 with the sales order.
    We want to flag the "Fixed Date and Quantity" field in schedule lines of the order in R/3 when the order is replicated to R/3.
    We also want to restrict the order specific to particular organization for which the fixed date and quantity is flagged when the
    order is replicated
    Any ideas on how to achieve this?

    thanks Rajesh..But I would like to do in a sales order without doing going to any other transaction. Can I assume that this is a gap and we need to code in user exit to trigger 413 movement type.
    points are rewarded.
    regards,

  • Update Schedule line Delivery date using Bapi_po_Change

    Hi all,
    I am using Bapi_po_change to Update the Schedule line Delivery date(EKET-EINDT) for the PO based on the Item and the Schedule line.
    I am passing the PO number, Po header, Item structure, Schedule line Structure.
    But the Date is not getting updated in the Eket table.
    Please suggest.

    Hi Sukriti,
    Thanks for the Response, yes i have used the Bapi Transaction Commit Also .
    The point is I am able to Update the Statistical Delivery Date in the Same EKET table using BAPI_PO_Change .I have Checked all the Ways to update the EKET-EINDT(Delivery Date)but no Unable to do it.

  • Schedule Line Delivery Date Calculation with Transportation Scheduling

    Hi All,
    We are currently running into a problem where our Sales Order Schedule Line delivery dates are being pushed out too far into the future - because of the Calendar being used to determine the transit time.
    We have 'Delivery Scheduling' and 'Transportation Scheduling' activated for our Sales Document type
    We have Routes that are configured with a 'Transit Time' and a 'Factory Calendar'
    Order Scenario:
    'Factory Calendar' assigned to our 'Route' is setup with only one 'Workday' in a given week e.g. Wednesday
    Our 'Route' has a Transit Time of 2 days
    We create a Sales Order on Monday for a Material that is available in our Plant
    The 'Goods Issue' date is being determined correctly for the next Workday - being Wednesday
    The 'Delivery Date' is extending out over 15 days (2 Wednesdays into the future) - since it is working on 'Calendar Days' and not 'Actual Days'
    Does anyone know of a way (config or other) to only influence the 'Goods Issue' date with the 'Factory Calendar' assigned to the Route, and have the 'Delivery Date' calculated using the Transit Time on the Route and 'Actual Days' rather than Calendar days?
    All help greatly appreciated.
    Thanks,
    Ravelle<i></i>

    Hi Pathik,
    Thanks for your reply.  I have already maintained the Calendars I'm using for this business process in <SCAL> - same as <OY05>. 
    The problem I'm having though is that by assigning a Calendar directly to my route (which I doing to influence the goods issue date - using a 1 Working Day Calendar) it is also taking precedence in determining the Transit time - which in this case I don't want, as I want my Transit time to be determined using a 5 Working Day Calendar.
    I don't think this problem has a config option as a work around...I think the only possibility in this case is a development to achieve the results we need.
    Thanks,
    Ravelle

  • Schedule line item data missing in Purchase order form in ECC6.0

    Hi All,
    We are doing ECC6.0 upgradation project . I am trying to print Purchase order in ECC6.0 , all data is coming fine in PO except schedule line item data is missing.
    Same print program and form works fine in 4.7E but schedule line item data missing in ECC6.0.
    Print program is a copy of standard SAP program SAPFM06P and layoutset is a copy of MEDRUCK.
    If anyone knows if there is any OSS note for the standard print program or any solution please let me know.
    Thanks,
    Sonali.

    Resolved on own.

  • Re : schedule line item date change

    HI
        How to change schedule line item date. Default 5 days inadvance its coming. i want to change that into 8 days.
    thanks
    mani

    Hi,
    Please go to t-code VOV8,select your s.doc type and double click it.Pl check no of days in "Requested delivery date/pricing date/PO date" -Lead time in days.
    If it is 5,change it to 8.
    Schedule line date is also determined after system carry out availability check.
    thanks,
    vrajesh

  • Schedule line level data

    Hi,
    I understant that SRM could not handle schedule line level data, Can any one explain me what is schedule line level data exactly and if the current vesrion of SRM does support it?

    Hi,
    Schedule line data is handled in SUS(Supplier Self Service) one of the module of SRM since June 2002 version SRM 2.0
    You have to use Process " Plan driven Procurement with R/3 - SUS scenario.
    Schedule line data in MM R/3 is published to SUS - supplier system as Scheduling Agreement releases automatically.
    Supplier can either accept or reject a schedule line.
    In current version of SRM 5.0 many useful functions are available like automatic E mail to buyer on acknowledgment of Sc. line data by Supplier.
    Write me if you need more detailed info.

  • I want to pick up Schedule line Delivery date based on Sales Order of Mater

    Hi Experts,
    I have one scenario like,
    I want to pick up Schedule line Delivery date based on Sales Order of Material.
    For example :
    Go to va03
    Give the order no
    Press the enter
    Double click on material.
    Go to Schedule line Tab
    Then we can find out the Delivery date .
    I want to pick up the that Delivery date. Could you please help on that.
    Thanks,
    Amjad.

    Hi,
    schedule line dates are available in VBEP.
    VBEP-VBELN = sales order number.
    VBEP-EDATU = schedule line date.
    REgards,
    Raghavendra

  • Schedule line delivery date

    Hi ,
      I am creating a order (  for which Delivery Not created ) for which schedule line delivery date is alloted . Which i can check in VBEP table .
    But when extracting the data in 2Lis_12_VCSCL , the order is not coming . Is the extractor is correce or anyother way of checking ( check in rsa3 also )
    Regards
    Ankit

    Hello,
    the extractor 2LIS_12_VCSCL is correct to extract schedule lines information of a sales order. Check with your mappings.
    Regards,
    NK.A

  • KANBAN cycle - Change of Schedule line dellivery date.

    Hi,
    I have some queries in KANABAN scenario
    1) How to change the schedule line delivery date generated from KANBAN cycle.
    2)How to avoid generation of schedule lines from KANABAN if the Scheduling agreement was not released.
    regards,
    Kannaiah Naidu

    Hi,
    1.It is not possible to change the schedule lines of the Scheduling agreement with kanban indicator. Only work arround solution is to remove the kanban indicator. Then you can change the schedule line.
    2.Using user exit, during emptying of the bin check whether scheduling agreement is released on not.If not released generate error.
    Regards,
    Krishna A S V

  • Missing Parts in production Order no committed date and qty

    Hello Guru,
    May I ask your help to check our issue when we create a Production order, we got an error Order has missing parts. When check the Availability Check view, most of the components do not have committed date and qty even there are available stocks on them.
    Can you help check what went wrong and its possible solution already check OPJK and OPJJ seems we have correct set up for this.?
    I tried to check in CO09 on one component. from there there is also 0 committed qty and date. While the other component has OrdRes with 0 committed qty and date and there are some with values. Please help thanks.

    Hi Ramagari,
    OPJK
    Plant AAAA
    Ord Type: YYY1
    Avalability Check: 2 (Check availability during order release)
    Material Availability Part
    Check mat. availability when saving order (tick)
    Checking Rule : YP (PP checking rule - Production Order rel.)
    Component Check Type : ATP Check
    Release Material: 1 (User decides on release if parts are missing)
    PRT Part
    Checking Rule : 02 (Status check and inventory audit)
    PRT Release : 1 (User decides to release when there's no PRT)
    Capacity Part
    No check (tick)
    OPJJ
    Availability Check: 02 (Individ. Reqs)
    Checking Rule: 01 (Checking rule 01)
    Stocks parts:
    Include safety stocks (tick)
    Missing parts processing part:
    Checking period: GR : 0
    In/outward movements part:
    Incl. Pur Ord : X
    inlc. pur Req (tick)
    incl. dep req (tick)
    Incl. reserv (tick)
    incl. sales req (tick)
    incl deliver (tick)
    incl. ship notif (tick)
    incl rel ord reqs : X
    incl pld ord : X
    incl prd ord : X

Maybe you are looking for