Schedule Lines getting combined in a sales order

Can some body tell me that is this a standard functionality of SAP that old schedule lines for which deliveries are created on previous weeks roll upto single schedule lines after certain time. I have a sales order for which different number of quantities got confirmed at different time and got delivered at various time in a span of 4 months but there is only one schedule line for them. Can someone help me in explaining this behaviour.

Hi Nithin,
When the the delivery is created for the full quantity of the schedule line, these schedule line is now irrelevent in the sales order The delivery now holds the requirement. As the delivery quantitiy is not fixed to any schedule line, the confirmed qty and
delivered qty gets moved to the requested schedule line during rescheduling. This is standard behaviour.
This behaviou can be changed by using modificaton note 833272. This notes changes the standard behaviour so that the fully referenced schedule lines are scheduled according to the rules defined in Customizing.
Also , Please review note 547508 point 2 for information.
Thanks
Amber

Similar Messages

I want to pick up Schedule line Delivery date based on Sales Order of Mater

Hi Experts,
I have one scenario like,
I want to pick up Schedule line Delivery date based on Sales Order of Material.
For example :
Go to va03
Give the order no
Press the enter
Double click on material.
Go to Schedule line Tab
Then we can find out the Delivery date .
I want to pick up the that Delivery date. Could you please help on that.
Thanks,
Amjad.

Hi,
schedule line dates are available in VBEP.
VBEP-VBELN = sales order number.
VBEP-EDATU = schedule line date.
REgards,
Raghavendra

Unable to enter multiple Schedule lines for BOM material in Sales Order

Hi All,
We have a Sales Order where in which we cannot add additional schedule lines for BOM material.
The schedule lines are greyed out, user was able to add schedule lines earlier.
I have checked all assignments in VOV6, VOV7 and everything seems to be fine and no changes have been made to item category being used.
Please provide a solution for this.
PFB link in which similar situation posted in this community but the final resolution method is not discussed.
http://scn.sap.com/message/13201504#13201504
Regards,
Samiksh

Hi Samiksh,
Pls check for that particular customer, only complete delivery allowed(c) is set in the CMR or CMIR. If so, you can't enter multiple schedule lines for that customer.. it would be grayed out in the sales order schedule lines except confirmed line.
or check the problematic sales order at item level shipping tab if the par del/item is set to 'C'
With regards
S.Siva

Confirmed quantity on the schedule line tab is 0 in Sales Order Screen?

Hi,
I created a sales order but the Confirmed quantity field on the schedule line tab is 0 .
There is unrestricted stock present in the plant also.
I am not able to do delivery because of it.So,please let me know if I need to check anything.
Regards
Nicky Samtani

I checked the avaliability screen and it shows me 3 columns
Received/Req Quantity = 15.386
Confirmed = 0
ATP Quantity = 0.
Does that mean that There is no stock avaliable for my SO and if it is then why Received/Req Quantity = 15.386 is coming.
Also is there any way I can get rid of this error by putting some more stock in the plant or anything on similar lines?

Delivery dates in schedule lines is not changing in sales order

Dear all,
delivery dates in schedule lines on line item in sales order is not changing.delivery dates are different in schedule line of partial qtys.i have to do same delivery date on all schedule lines.
Regards,
Praveen

Hi Praveen
1. Schedule Line dates can be changed manually or by doing an availability check only.
2. In case if you change the delivery date in the header it will not change automatically in the line item level.
3. You need to do it manually only.
kindly let me know more details.
reg
dsk

Schedule line getting created for material whose stocks are maintained

Hi Friends,
I am having an unusual problem of schedule line getting created for material whose stocks are there in the system. I have created an SO for some material, and all the material is having sufficient qty in the system but still the system is generating schedule line.
Can someone please advice what could be the problem and the solution to it.
Regards,
Wasim.

Hello Wasim,
- In TCode MM02, Check Scheduling in MRP2 Tab of Material master (if MRP is active.)
- In Tcode OVZ9 - AvC control, for your Availability check maintain (eg. 02) in material & Checking Rule:A-SD order.
Whether Check availability without replenishment lead time is unchecked, as this Indicates whether, during the availability check, the system checks the replenishment lead time. So, Items for which the delivery date falls within the replenishment lead time, but for which there is no inventory, are confirmed for delivery after the replenishment lead time. In the case of items for which the delivery date falls after the end of the replenishment lead time, the system assumes that everything can be confirmed.
Thanks & Regards
JP

Billing date at line item level in a sales order

HI!
Can anyone let me know the significance of billing date being present at the line item level in a sales order?
And why does it get changed as per the Requested delivery date if the Prop. Pricing date in the maintanenece of sales doc type is set as 'A'?
Can it be different for different line items?

Hello Asha,
Can anyone let me know the significance of billing date being
present at the line item level in a sales order ???
The comprehensive information is available at SAP technical help(F1) for the "BILLING DATE" field at Sales Order line item level...Before raising these type of questions, i would urge to conduct initiate analysis and then post at SDN forum if you are unable to find out answers...For your quick reference, i have extracted the same description for Billing date from SAP techincal help (F1) and pasted below.
Billing date for billing index and printout
+The date on which the billing is processed and booked for
accounting purposes.+
Use
+You can use the billing date as one of the selection criteria
when you process billing documents collectively.+
Procedure
+If invoice dates are defined for the customer, the system proposes
the billing date from the invoice date calendar. If no invoice dates are
agreed, then the actual goods issue date is formed on the basis of
delivery related billing. In order related billing, the billing date of the
order forms the basis of the billing date.+
+If you are billing services, the system proposes the date of services
rendered. You can change the date manually in the sales document.+
+If you are using a billing plan to bill a project, the system can propose
billing dates for the billing plan on the basis of planned or actual dates
in the corresponding milestone.+
+In a billing plan for a maintenance or rental contract, you can specify rules
by which the system determines billing dates on the basis of other dates in the contract.+
Regards,
Sarthak

How to get Changed fields in Sales order to create a report

Dear Gurus,
How to get the log from sales order for the change of particular field.
In my scenario, If an user remove the delivery block from sales order I want to capture the date on which this delivery block
is removed and by whom (User)?
I know that I can get the log of change but can I get in the form of field updates because further I want to use that date and user name to create a report.
I hope u got my query. Please reply soon that I can create a report.
Thanks in advance.
regards,
Sanjay

Hi
You can use the table CDPOS for tracking the changes at the Table level with the Sales order number
or Else you can also use AUT10 transaction to track the logs/chanages with START DATE, END DATE and the Transaction code in your case it is VA02
Please check and revert back
regards,
santosh

Is there any FM or BAPI to get list of all sales orders

Hello all,
I have the requirement like below.
Is there any FM if i Pass Drawing document no, type,part,revision level which gives
the output list as.
1) all sales orders, where the above drawing document no is attached to the materials
and these materials are used as one of the lower level components in the Sales order BOM,
I need to show all those sales orders along with SO number,item,Material,Plant and BOM Item no,
2)all sales orders, where the above drawing document no is attached to the materials
and the same material is one of the item in sales order.
3)all sales orders, where the above drawing document no is used as one of the component in Sales order BOm's
Addition of 1,2,3 will be the o/p.
are there any FM or BAPI to get the above list.
Basically the above report is concatenation of report outputs of t-code CSD5 and CS15.
Awaiting reply.
Thanks.

Hi venkatesh,
You can use the BAPI
BAPISDORDER_GETDETAILEDLIST
to get list of all sales orders.
Here is a lik which provides you BAPI'S regarding everything.
[http://www.saptechies.com/sap-bapi-list/]
Hope this will help you.
Regards,
Pavan.

To Get the list of sales orders for a Business partner in CRM.

Hi all
Is there any Function module or BAPI to get the Sales orders for a Business partner in CRM. I know there is a BAPI to get the list of sales orders for a customer in ECC, but I donu2019t know how to get the list of sales orders for a Business Partner in CRM.
Can anybody tell me if there is an inbuilt function module or BAPI available?
If not how can I pick the sales orders of a business partner in CRM? Between which tables should I apply a join and write SELECT statement to get list of sales orders for a business partner in CRM.

Hi Jessica,
Try CRM function module CRM_BUPA_READ_ORDER_OBJECTS.
You'll get a table with the documents associated to that partner, where you can work on.
Kind regards.

Want to get a popup when sales order is created or saved

hi all ,
I want to get a popup when sales order is created or saved .Is there any user exit for the same?
thanks in advance ,
Naval bhatt

Hi,
try this.
Go to the include MV45AFZZ of Sales Order Main program SAPMV45A
and find the correct exit in that and write the User exit code after saving the document FORM USEREXIT_SAVE_DOCUMENT_PREPARE or
FORM USEREXIT_SAVE_DOCUMENT by calling/writing the
fun module POP_UP_TO_CONFIRM.
Regards,
Anji
Message was edited by:
Anji Reddy Vangala

Can't get my 3rd Party Sales Order to create the PO automatically...

I'm trying to get the 3rd Party Sales Order process to work and I would like it to create the PO automatically (it is already creating the requisition without issue). I have:
i) Set the Auto PO on the Item Category
ii) Set the ALE paramenters asociated with the Sales Org definition
iii) Set the Auto PO on the Vendor Master
iv) Set the Auto PO flag on the Purchasing tab of my NLAG material
v) Created a Vendor Info record
BUT I still don't get a PO being created automatically .... can anyone see where the problem may be?
Thanks.

Hi Dennis - I really appreciate the feedback but I started this thread with ....
I'm trying to get the 3rd Party Sales Order process to work and I would like it to create the PO automatically (it is already creating the requisition without issue). I have:
i) Set the Auto PO on the Item Category
ii) Set the ALE paramenters asociated with the Sales Org definition
iii) Set the Auto PO on the Vendor Master
iv) Set the Auto PO flag on the Purchasing tab of my NLAG material
v) Created a Vendor Info record
BUT I still don't get a PO being created automatically .... can anyone see where the problem may be?
I have since confirmed that I can trigger a PO creation by running ME59N BUT the PO is not created automatically when I save the sales order despite what the help text on the item category implies.
I think I have already done every you have suggested and even a little more, or maybe I'm missing something? Do I need to do something with ALE - turn something on perhaps? Have you actiually seen this functionality working? I'd love to hear from someone who has.
Regards.
Patrick

User-Exit after saving VA01 to get the number of Sales Order.

Hi everyone,
I hope you all fine!
I really need your help to get a user-exit or BADI for the VA01 transaction, because after pushing the save button I need to get the number of sales order, so I can create a header text, but to use a Function Module to do that, I need the sales order first.
I hope You can help me with this.
Thanks for your time.
Regards,

Hi,
      Goto se38 ,
    1. Enter prog. name "MV45AFZZ"
    2. Choose "Enhance" from application tool bar,
    3. Edit>Enhanc.Operations>Show implicit Enhance...
    4.Right click>Enhancement Impliment> Create....,Before that,you have to choose which subroutine is suitable for your scenario...then you can code it .
   Also,try this user exit -->"V45E0001"
I hope ,it will help you...
<<=< Sharing Knowlede is a way to Innovative >>=>
By,
Yoga

Sales Order Schedule Lines getting updated

Hi,
In my system when I am changing the delivery date of 'AB' confirmation in the Purchase order Item level confirmations, the corresponding Sales Order' schedule line is also getting updated with the delivery date.
So, my question is is this a standard SAP functionality or this fuctionality has been implemented through BADI, Exits etc.
Regards,
Rachit

Rachit,
This is standard SAP behavior. In 3rd party sale process, the changes done to PO (qty, dates) are updated automatically in the sales order.
TW

Sales Order Schedule line not populating in the Production order

Queation: Is there a way to tell the system to look at the sales order, line item AND schedule line. It is displayed in MD04 but it doesn't carry over to the Production Order. We are a MTO and this information is relevant in a number of ways.
Please Help.

Vickie,
If you are using MTO scenario then when you run the MRP for the material, it will create a planned order for that sales order based on the dates calculated from the sales order schedule line (Shipping tab)...
So now when you convert the planned order to production order, all the sales order details will get copied.
try and revert back.
Swapnil

Schedule Lines getting combined in a sales order

Similar Messages

Maybe you are looking for