Schedule logs to export on ACS 5.1

I'm trying to find a way to schedule our TACACS logs to export once a day in a .csv format or whatever and send to a logging server. I'm sure that this can be done, but what are the steps?

Hi,
You can export the logs to an external syslog server:
System Administration > Configuration > Log Configuration > Remote Log Targets.
The CSV files themselves are not possible to schedulle to be sent to an external destination.
HTH,
Tiago
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Similar Messages

How do i log into export pdf

how do i log into export pdf?

Hi gregb73859509,
You can log in via either the web interface at https://cloud.acrobat.com or from within Adobe Reader, by clicking the blue Sign In link in the upper-right corner. In either case, use your Adobe ID and a password, and you should be all set!
Please let us know if there's anything else we can help with!
Best,
Sara

Scheduler Log - monthly job skipped Apr Monthend

Hello - we have been using the scheduler to run
daily, weekly and monthly reports for a couple of years with no
problems. We are running MX 6.1. Apr 29th I had to stop/restart IIS
and CF. The scheduler log shows the jobs getting 'scheduled'. The
monthly report gets scheduled for May 31, skipping over Apr 30th.
The log says:
"activating2 on Tues Apr 29 09:05 2008 to run on :Sat May 31"
The Monthly scheduled task job say:
"start May 31, 2005 , recurring Monthly at 10:40pm"
any help would greatly be appreciated!! thanks

I apologize if you already solved this.. but see Metalink ID 790221.1
+*<Moderator Edit - deleted contents of MOS Doc - pl do NOT post such content - it is a violation of your Support agreement>*+

BACKGROUND JOB WAS NOT SCHEDULED/LOG FILE NOT YET GENERATED

Hello,
To generate the log report, /VIRSA/ZVFATBAK program is scheduled on hourly basis but some time report doesn't get generated and if we see the background job then it shows sucessfully finished.
If we see the maually the log report for FFID then below error message is displayed.
" BACKGROUND JOB WAS NOT SCHEDULED/LOG FILE NOT YET GENERATED"
Can anyone guide me to solve the issue.
Thanks in advance.
Best Regards,
Prashant Dubey

Hi,
once chk the status of the job by selecting that and check job status(cltr+shift_f12)
since it was periodically scheduled job there will be a RELEASED job after every active job..
so try to copy that into another job using copy option and give some new name which u have to remember...
the moment u copy u can find the same copied job in SCHEDULED status...
from here, try to run it again on hourly basis....
After copying the job u can unschedule the old released job to scheduled otherwise 2 will run at a time...
rgds,

How to disable Scheduler logging in CF10

Hi,
In the coldfusion-out.log we are seeing scheduler log entries like this:
Nov 11, 2014 20:54:14 PM Information [ajp-bio-8012-exec-127] - Starting HTTP request {URL='http://somesite.com:80/1.2?output=xml', method='get'}
Nov 11, 2014 20:54:14 PM Information [ajp-bio-8012-exec-127] - HTTP request completed {Status Code=200 ,Time taken=313 ms}
Nov 11, 2014 20:55:00 PM Information [scheduler-2] - Run Client Storage Purge
Nov 11, 2014 21:00:00 PM Information [DefaultQuartzScheduler_Worker-1] - Task default.blah triggered.
Nov 11, 2014 21:45:00 PM Information [DefaultQuartzScheduler_Worker-2] - HTTP request completed {Status Code=200 ,Time taken=773 ms}
Quite simply, how can we disable them?
We have no logging enabled for scheduling in CF10 Admin, and yet they are still generated.
Advice appreciated.

Thanks for the speedy reply, however in that page you mention I can see coldfusion-out.log but I only want to stop scheduler events being logged. How do I do that? There is a scheduler.log, but the events are not appearing in that log file; they are appearing in coldfusion-out.log. The logging is very confusing in CF10, at least to me!

Log file size on ACS 5.3

Hi,
how do i set limit on the log file size in ACS 5.3. I had the same issue with Nexus 1000v but there is a command that enables you to set log file nane and size. it is getting bulky. any advice?
thanks
Kerim

Hi,
Here is the explanation of this function:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/admin_config.html#wpxref88023
Here is some information about the file system that this is deleted from:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/logging.html#wp1052656
So if the file that you are looking at is active (probably is if you see logs from yesterday and today, it will not be deleted).
Hope this helps,
Tarik Admani
*Please rate helpful posts*

Can I schedule and email reports from ACS 5.1

I would like to receive a report daily on our TACACS activity on our network devices. I've looked thru the menus and searched some but have not found a clear way to generate such a report.
any help is appreciated.

Working with Scheduled Reports
In ACS 5.5, you can schedule reports for a future date in such a way that ACS automatically generates the report. This can be done using the scheduled reports feature available in the Monitoring and Reports web interface. This feature is available only for the for RADIUS authentication, RADIUS accounting, TACACS+ authentication, TACACS+ authorization, and TACACS+ accounting reports. ACS generates the scheduled reports based on the given time range, exports them to a .csv file, and stores them in the specified remote repository.
Previous releases of ACS allowed you to export reports and copy the .csv file to the local file system. You need to copy the exported file using the copy command to a remote location. But in ACS 5.5, you have the option to configure the remote repository to which the generated reports are exported and stored.
An email notification is sent whenever a scheduled report is generated successfully. The email notification contains the following information:
Scheduled Report Name—Name of the scheduled report.
Cause—The reason for which you have received this email or alarm notification. In this case, the notification is a scheduled report alarm.
Details—The details of the email notification.
Repository Name—Name of the remote repository where the generated reports are stored.
Repository URL—URL of the remote repository.
File Name—Name of the generated report. The format of the filename is <Name of the Scheduled Report>-<Report Type>. For instance, if the name of the scheduled report is “report1” and the report type is RADIUS_Accounting, then the filename is displayed as: report1-RADIUS_Accounting.csv
Generated on—The date and time at which the report is generated.
ACS does not generate any alarms or email notifications if a scheduled report generation fails. To know the status of the scheduled reports, go to the Monitoring Configuration > System Operations > Scheduler page and check for the status.
http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-5/user/guide/acsuserguide/viewer_reporting.html

Setting privilege level for logging into ASA through ACS

Hi!,
In my environment i implemented AAA for logging into switches, routers, asa etc through ACS which is being configured TACACS+.
I have set different privilege levels like readonly, readwrite etc into ACS. There are working fine when i try to login into switch or router.
But in ASA i am unable to restrict the privilege levels of different users.
Can someone plz guide me with ASA & ACS setting to solve this issue!!!!!

Hi!!
I tried this option. It is working fine with routers & switches. But for ASA privilege access it is not functioning.
I created 3 profiles in "Shared Profiles" & added 1 of them in Group setting & added users to this group with mentioning group authentication. This way i am able to control access to the switches & routers with proper privilege. But the same way when i tried to impolement ASA it's not happening.
Can u plz check it out...

Where is the Scheduler log file located?

I'm trying to track down and diagnose this error in my scheduling/bursting:
Error!! Could not deliver the output for Delivery channel: EMAIL. Please check the Log for error details...
But a search of my entire drive does not reveal any file with a .log extension that has been updated recently, nor do I see a reference to the location of said log file anywhere in the documentation.
Where is the log file to which this error message is referring? Running the OBIEE Suite 10.1.3.4.1 under Windows.
Thanks!

Hi Mthompson,
Look at this on how to create the log file.
http://winrichman.blogspot.com/search/label/xdodebug
am sure, you did not create the email/smtp configuration, thats why you see this error.

Event viewer filtered log not exported correctly

Hi all,
I have a very strange problem, or better, I'm missing something.
I can open the event viewer and there are many events in there (45'000). I can filter for the last 7 days and this shows me only 1925 events which is correct.
Now, if I click on SAVE FILTERED LOG FILE AS, I can save the file in XML or TXT format (or others). It's not important the format because the export is incorrect! What I mean is that once the file has been exported to a TXT or others file's format, it contains
just some events, in this case maybe 50-60 events, not more! The strange thing is that in that file I can see ONLY the events from the most recent day in the filter (right now the 14 of june).
Now the funny part: if I save THE SAME LOG as .XML, it doesn't show all the events, but more than the TXT file (in this case, it shows until the 2nd of june), but the last event on the filtered event viewer, is on 13 may.
I hope somebody can help me, and excuse me for my explanation.

Hi ripp3r,
Thank you for your post.
I test to save event log following your description with same result. When I save log to evtx format file, the log show correctly.
Then I find KB2417105 (for Windows 2008) to express that logs are truncated because the saving event log operation is not synchronized appropriately with the fetching-event operation.
When I installed the KB2417105, event log saved to txt file successful.
If your server OS is Windows 2008 R2, please install
KB981466.
If there are more inquiries on this issue, please feel free to let us know.
Regards,
Rick Tan

CRS 2k8 v1 - Scheduling report to export DAILY with a set of parameter?

Dear all,
I have a report file (AccountBalance.rpt) with 2 parameter : BranchID, CurrencyType. Belongs to BranchID , this report will display all accounts balance of this Branch.
Example :If I input BranchID : 000200, It will display all accounts balance in Sai Gon Branch.
Would you please tell me How to schedule to export this report ( to .pdf) for every Branch?
Thanks,

You may consider to use publication for this.

Hyperion Financial Reporting Studio - usage log and exporting criteria

Hello, is there a way to run a usage log for the reports that we have in Financial Reporting Studio?
In addition, can I export the report criterias? I'm looking at potentially archiving some reports we have out on the server that is not currently being used. Thanks much!!!

The FRReportSrv log file under Hyperion\logs\BIPlus gives you the report usage tracking. I am not the developer of our process and I am not techie at all, but we have a process that scans the log files, parses the log files and load it into Oracle. Then thru Oracle Apex, we develop reports to track FR usage.
I am not sure what you mean by report criterias. Do you mean, for example, if the report is not used for over 5 months, you would like to archive it? If you can create a similar report like the one I described above, then yes, it would help you to determine the idle reports, but I am not sure if you can automatically archive the reports. I think it would have to be manual, where you would use the export function on Workspace to archive your report.
Hope this helps.
Cheers,
Mehmet

GRC FF 5.1 BACKGROUND JOB WAS NOT SCHEDULED/LOG FILE NOT YET GENERATED

I've had FF installed in prod for 4 days. I just now got around to running the /VIRSA/ZVFATBAK job. However it only generates the logs for the last 24 hours. I know when you schedule the batch run to run hourly this will be resolved but I wanted to run the /VIRSA/ZVFATBAK job manually the first time because I knew it would take longer than an hour. Is there a variant I can use in SE38 to get these earlier logs generated?
thanks for your help
Dave wood

You can create your variants in SE38. It does not come up with the programs. For Spools, you can get upto 3 days of logs while for the work logs, it will be a week max. But, i think you can change the system parameters in such a way you can retrieve the logs of the jobs for more than a week.
Thanks
Sudhan Shan

When a job is scheduled log cannot be seen

Hi All,
Im working in Oracle Warehouse Builder Client & Repository 11.1.0.7.0.
We have some ETL jobs that has to be executed on a daily basis.
But when we schedule the ETL Job, we cannot see the log, i.e. step by step process of the Process Flow.
And the same appears when we manually trigger the job.
Please let me know whether there is a way i can get log file when my job is scheduled.
Thanks in advance
Regards
Prem

Hi All,
Im working in Oracle Warehouse Builder Client & Repository 11.1.0.7.0.
We have some ETL jobs that has to be executed on a daily basis.
But when we schedule the ETL Job, we cannot see the log, i.e. step by step process of the Process Flow.
And the same appears when we manually trigger the job.
Please let me know whether there is a way i can get log file when my job is scheduled.
Thanks in advance
Regards
Prem

Databases with spatial give errors in log during export

my databases export fine, but the databases that have Spatial installed show these errors in the export logs..
enterprise database v11.2.0.2 patchset 11
ORA-39127: unexpected error from call to local_str := SYS.DBMS_EXPORT_EXTENSION.GET_DOMAIN_INDEX_METADATA('PARKING_SI','I_NAVTEQ','SDO_INDEX_METHOD_10I','MDSYS',11.02.00.00.00,newblock,0)
ORA-01403: no data found
ORA-01403: no data found
ORA-06512: at "SYS.DBMS_EXPORT_EXTENSION", line 270
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_METADATA", line 6498
expdp system/******* DIRECTORY=Export DUMPFILE=OSOW.DMP LOGFILE=OSOW.LOG FULL=Y PARALLEL=4
also tried with sys as sysdba. same results

Hi,
Install the patch Patch:10402740
roblem : ORA-39127 ORA-6512 In SYS.DBMS_EXPORT_EXTENSION During Datapump Export Of Domain Indexes
Kind Regards,
Rakesh

Schedule logs to export on ACS 5.1

Similar Messages

Maybe you are looking for