SCHEDULE MRP RUN POST PP/DS RUN

Dear All,
How can i link a backgroung job in ECC 6.0 for a MRP RUN, subsequently to PP/DS run in SCM 5.0 so that i can plan NON-APO componnets.
Suggest me a method so that the backgroung job gets automatically triggered once the PP/DS run fininshes.
Thanx in advance.
Regards
AMRISH KUMAR

Hi AMRISH
As far as I know, there is no way to trigger ECC MRP from APO PP/DS side.
I think the easyest way is control PP/DS job and MRP job by using JOB scheduler. I think you use ECC6.0 and SCM5.0.In this case, you can use REDWOOD Cronacle with free liscense.
This job schedule enable you to use event base job control.
So you can trigger ECC MRP after finishing SCM PPDS MRP from this scheduler.
For more detail information, Please check following URL
http://www.redwood.com/en/solutions-for-sap-customers
And SAP Note 991684 and 895253
Best Regards
Keiji

Similar Messages

Scheduled MRP run were cancelled automatically

hi guys!
i have scheduled MRP run in MDBT with variant MRP1,then when i run it,it was released but others have been cancelled automatically by the system.why?
kindly advise.
thanks,
crimson

http://www.sap-basis-abap.com/pp/mrp-run-exception-description.htm
http://www.sap-basis-abap.com/pp/problem-in-the-mrp-run.htm
Check this links may be helpful.
Regards
Ravi

Scheduled MRP run were cancelled automatically after released a new one

hi guys,
I've scheduled MRP run but when i realeased it, the previous schedule has been canceled automatically. Why is this happen?
Kindly advise.
thanks,
crimson.

http://www.sap-basis-abap.com/pp/mrp-run-exception-description.htm
http://www.sap-basis-abap.com/pp/problem-in-the-mrp-run.htm
Check this links may be helpful.
Regards
Ravi

Scheduled MRP run.

we are running MRP as a batch job every day. my clientss requirement is to know all the purchase requisitions and planned orders generated against that particular MRP rup. is there any way to get this particular information.

Hi
For purchase requisition check in the t-code ME5A and for planned orders in CO41. It also depends on your business process how you configure the MRP parameters I mean whether to generate the requistion or planned orders.
Also you can check in the tables EBAN and PLAF with status indicator which shows whether they are generated manually or automatically through MRP run..
Regards,
Patil

Order of delivery schedule line counter at schedule agreements from MRP run

Currently we are using schedule agreements for our long term external suppliers, but we are facing a problem with the order of new delivery schedule lines created during MRP run.
Because of master data settings like, lot size, rounding value, plan delivery time and planning time fence to set as firm new requirements, multiple schedule lines are created with no order for schedule line counter.
Does anyone is aware of a BADI, user exit or customizing control to have this schedule line counter in order?
Thank you
Daniel Guillen
IT
Skyworks Inc.

Hi,
Pls put this query in SD fourms and get immly help because this is technical fourms.
Anil

The delivery schedule lines don't get created automatically on MRP run.

Hi All,
The delivery schedule lines don't get created automatically on MRP run for subcontracting material. I have maintained source list as follow eg.
Valid from | Valid to | Vendor | Porg | PPI | Agreement | Item | Fix | MRP | MRP area
02.11.2009 | 31.12.2999| XYZ | XY01| |AA0000XYZE |10 | X |2 | ABC
Could you please help me about this issue
Thanks in advance.

Hi Amit,
Please ensure the value of Special procurement key in the MRP2 view for the material. It should be maintained as 30 - subcontracting.
Thanks and Regards,

Schedule lines are not coming for HALB after MRP run

Dear All,
I am not getting schedule line after mrp run, inspite of all required setting only purchase requisitions are coming.
Material type is HALB and involve a subcontracting process (30). For raw material I am getting the schedule line but in the case of HALB, it is not coming.
Pls let me know if I am missing something and guide me further on this.
Thanks & Regards
Kundan Kumar

Hi,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.

Schedule Lines are not getting generated after MRP run.

Hi,
I have an issue where a SA exists for the parent material with item category L (subcontracting). The parent material has a valid BOM and some sub components as well. I see in CS03 that BOM is fine with validity dates for the parent material. A valid source list also exists for the parent material where SA is present as the source of supply with MRP indicator as 2. Now when i run MRP for the parent material using MD02 (NETCH), with indicators as below:
Create pur.req. 2
Schedule lines 3
Create MRP list 1
Planning mode 1
i don't see any schedule lines in MD04. Instead it creates a PR that too without any source of supply.
In master data for the parent material MRP type is PD with Procurement type F and special procurement key 30. I have checked and every thing seems to be fine still MRP run doesn't create schedule lines.
Any help is appreciated. I can give more info if required.
Thanks.

Dear Rakesh,
Scheduling agreement:An outline agreement against which materials are procured at a series of
predefined points in time over a certain period.
1.For this you have to first use ME31L for creating scheduling agreement and then ME38 for maintaining scheduling agreemnet
schedule.
2.Ensure in the source list after maintaining the material,vendor combination the setting for MRP relevancy is set to 2 - Record
relevant to MRP,Schedule line generated automatically.
Moreover you have to use value 3 for delivery schedule line which is one of the MRP control parameter while taking MRP run.
So for the materials for which scheduling agreement exists,schedule lines will be generated.
Check and revert back.
Regards
Mangalraj.S

Schedule lines are not coming after MRP run for HALB material

Dear All,
I am not getting schedule line after mrp run, inspite of all required setting only purchase requisitions are coming.
Material type is HALB and involve a subcontracting process (30). For raw material I am getting the schedule line but in the case of HALB, it is not coming.
Pls let me know if I am missing something and guide me further on this.
Thanks & Regards
Kundan Kumar

Dear All,
I am closing this thread. As the vendor mentioned in scheduling agreement is not a subcontracting vendor. Its a individual vendor.
Thanks for all the reply.
Thanks & Regards'
Kundan Kumar

Schedule lines not generated after MRP run

Dear All,
I am trying to create Schedule lines through MRP run , but instead system creates MRP element PRqRel and its PurRqs when i check in MD04 , the following are the prerequisite i done before MRP run , but still Schedule lines are not generating.
1.activated checkbox source list in material master.,Procurement type is F, MRP type PD , lot size MB , marked JIT Scheduling indicator as 1 in Pur view of material master , no MRP group is used in our process.
2.Maintained Inforecord.
3.Maintained source list for the material and marked MRP relevant as 2. Validity also checked.
4. Quota arrangement for this vendor only.
5. Created New scheduling agreement.
6. Material is not sent for subcontracting.
7. Ran MD02 with following parameters ,
Processing key NETCH Net Change in Total Horizon
Create purchase req. 1 Purchase requisitions in opening period
Delivery schedules 3 Schedule lines
Create MRP list 1 MRP list
Planning mode 3 Adapt planning data (normal mode)
Please let me know if i am missing something
Thanks in Advance
Benny

Hi,
Please check the below links...
Schedule Lines not getting created in MRP
Schedule Lines not generated for MRP Type PD
Kuber

Scheduling agreement MRP run

Hi All,
We use Scheduling agreements for purchasing spare parts. The nightly MRP run checks the warehouse requirements and creates delivery schedule line to scheduling agreement.
Now the MRP run creates unnecessary delivery schedule lines to scheduling agreement if the earlier created delivery schedule line's delivery date has been changed manually.
Today the MRP run finds requirement for article XYZ and creates the delivery schedule line, where delivery date is 2.9.2008 (determined from articles basic data).
The Vendor confirms the delivery date as 3.10.2008 and the purchaser changes manually (transaction ME38) the delivery date to delivery schedule line accordingly and prints the created message.
The next MRP run creates new delivery schedule line, where delivery date is again 2.9.2008.
After that there are two open delivery schedule lines for article XYZ with delivery dates 3.10.2008 and 2.9.2008.
Why the MRP run does not notice the existing delivery schedule line with the new delivery date 3.10.2008?

issue resolved

Schedule lines are not getting generated during MRP Run

Schedule lines are not getting generated during MRP Run. I have maiantained source list for the material with proper validity date and also maintained scheduling agreement . MRP relevvant Indicator , I have marked - 2 which means -Record relevant to MRP. Sched. lines generated automatically.
Still I am not able to get schedule lines and instead of that *Purchase Requisitions* are getting generated.
Can any one help me and suggest me what to be done in this case .
Thanks & Regards ,
Nirmalya

Dear,
Welcome to SDN,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.
Regards,
R.Brahmankar

How system will generate schedule line for PO after MRP run.

Dear Experts,
                             i have updated MPS in MD61, the period indicator was M (monthly), after MRP run, system generating schedule lines on daily basis for Scheduling Agreement(ME38), i want schedule lines   on mpnthly basis, how to achive this,
thanks in advance.
regards
rajakarthik

Hi
1. Are you maintaining any Planning time fence period for MPS- No
2. What is the PIR qty you maintained in MD61:
                                                                                i.) FG01 is having BOM child part RM01.
                          To produce 1 nos of FG01 , I need 1 nos of RM01
ii.) i maintained FG01 in MD61 with PIR Qty 5000. in MD61,Planning period is M and planning hirizon1- jan10To 31-Jan10
       ii.) i maintained lot size:Monthly lot size for RM01.
       iii.) there is no stock available for both RM01 and FG01.
3. After MRP how much qty is get planned on what date-
     i)   planned order created for FG01 in co41 with qty-5000 nos.
     ii) in ME38, schedule line created for RM01, on 01-01-2010, with 5000 nos, currently Category of Delivery Date
field is D and delivery date is   01-01-2010, but i want Category of Delivery Date should be M and delivery date should be 01.2010.
thanks
raja

MRP Run error " Schedule Lines not generating properly"

Hi Folks,
I am facing a typical issue with MRP Run.
Every time when I am running the MRP for a particular material I have made settings such that Schedule lines to be generated by maintaining the Source list and MRP relevancy as 2 in source list. Also I have fixed the vendor. Now my problem is I am getting Schedule lines for first run and Combination of Purchase requests and Schedule lines or only PRs for the next MRP run.. This is keep on repeating in such as way that the planning is shifting as said above for subsequent MRP Run.
Note that the initial settings during MD02 remain same for all run.
I want only schedule lines to be generated but not PR.
Pls advise and provide input where the wrong might be.
Quick responce would be appreciated.
Regards
Shash

Dear shash,
Check with What are the MRP control Parameters values which you are using for the MRP run.
In MD02, For Deleivery schedules run with value 3 - That's - Schedule lines.
The other options are 1 No schedule lines
2 Schedule lines in the opening period.
check with this & revert back.
Regards
Mangalraj.S

Automatic creation of Schedule line after MRP RUN

Hi,
Till now we are using only PO for placing orders to vendor, now we want to use the functionality of scheduling agrement, so that after MRP run, we can get automatic schedule line creation, for this , what are settings required, how system create the automatic schedule lines based on which criteria, second thing while creating on eschedule agrement i found that the conditon which i can add for a vednor in ME21N that all condition are not coming while creating schedule agrement even my vendor is same for PO and Schedule agrement, so what are the setting required for this.
regards,
zafar

Hi
1.In material master purchasing view data auto PO is to be flagged.If scheduling agreemet with release documentation.
Then flag JIT indicator 1.
2.maintain MRP views in material master
3.In source list for fix vendor,source list usage 2 is to be maintained.
4.Vendor master purchasing data auto PO indicator is to be flagged.
5.Then when you run MRP automatically schedule lines are generated.
For JIT and forecasting maintain creaton profile in OMUP transction.
Assign the creation profile in scheduling agreement.

SCHEDULE MRP RUN POST PP/DS RUN

Similar Messages

Maybe you are looking for