Schedule possible to turn on/off the radio/WIFI transmission?

I want to know whether it's possible to set-up a schedule to turn on/off the radio/WIFI transmission for the Airport TimeCapsule?
For example: WIFI (radio) is turned off every evening at 23:00 hour and turned on again at 07:00 in the morning

Yes, it is there is in the setup.
Go to the network tab
Click on Enable Access Control and then Time Access Control which will open a second menu page.
Remember if you want an off time like 11pm and on time at 7am it is a different day.
So you set off from 11-11.59pm and 12.01-7am next day.
A 10sec google ..
http://9to5mac.com/2013/10/06/how-to-set-time-limits-on-your-wi-fi-network-using -airport-utility/
https://discussions.apple.com/message/22836329#22836329

Similar Messages

  • My phone don't charge without turning off the radio signal on the phone.

    My phone do not hold a charge unless I turn off the radio on the phone or remove the sim card. Prior to this it while charging a black plug used to replace the lightening bolt on the battery symbol. However, while the radio is off the plug do not appear. Please advise.

    Hello seanjontt
    Welcome to BlackBerry Support Forums
    Are you sure that the battery is good enough or have you tried to use another Good BlackBerry battery , if not then try to arrange a fully charged battery and test it on your device , it will reveal if the problem is within your device or the Battery itself.
    Try it and let us know.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Turn off the radio in access connection

    I am going to deploy AccessConnection 5.33 on XP to a number of clients and I want to turn off the radio with a vbscript when users log off. I have heard that this can be done in the registry but I haven't found the correct key.
    (I don't want to use Fn+F5 to do this)
    Does anyone know what reg.key to use?

    I don't know about the registry or any vbscript but there is one option in the access connection setting that say turn off all wireless connection when the user log off....
    it's under the advanced screen, global setup (or whatever is called; i'm using chinese) and the third checkbox under the network tab...give that a try...might need to do that as admin to apply to all user?
    maybe that's what are you looking for or a good place to start?

  • Since updating my Iphone to ios 8, my hands free in the car (Radiosat) is not working correctly.  The phone pairs ok with car, and my phone is recognised but then it cuts off the radio and says that I'm in a call, I can't cancel the call or do anyth

    Since updating my Iphone to ios 8, my hands free in the car (Radiosat) is not working correctly.  The phone pairs ok with car, and my phone is recognised but then it cuts off the radio and says that I'm in a call, I can't cancel the call or do anything.  I have taken my car to my local dealer but they say the Radiosat is working ok?

    Hello there stidhambr15,
    I was researching the issue you are having and recommend a couple of things. First it might be a good idea to reset the device following iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting found here http://support.apple.com/kb/ht1430
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't quite get the device going again, I recommend restoring the device.
    iTunes: Restoring iOS software
    http://support.apple.com/kb/ht1414
    Might even be a good idea to turn off the phone, reseat the SIM card, and turn it back on.
    iPhone and iPad: How to remove the SIM card
    http://support.apple.com/kb/ht5163
    iPhone 4 (GSM model)
    iPhone 4S
    Cheers,
    Sterling

  • TS1587 Hello, I downloaded an ntfs systemfile from tuxera and used it to convert a usb stick, my imac froze a while after so I turned it off the on and now I have blue vertical lines on boot up and the a white screen with lots of tine blue symbols, need h

    Hello, I downloaded an ntfs systemfile from tuxera and used it to convert a usb stick so I could put more than the fat32 4gb on, my Imac froze a while after so I turned it off the on and now I have blue vertical lines on boot up and the a white screen with lots of tine blue symbols after, mouse pointer moves but thats about it.
    Have used R and cmd to get a menu up but once I choose one of the four options my mouse is rendered useless and I cant get any further, have downloaded, to another usb stick recovery disk assisstant and am trying to use that in conjunction with the lion option on the previously mentioned screen, computer was responding really slowly and has now frozen on the terms of software license agreement (maybe the last hurdle!) can anyone pleeeeeease help!!!!!??????

    It's likely that the boot drive is failing, or that there's some other hardware fault. Run the Apple Hardware Test.
    Intel-based Macs: Using Apple Hardware Test
    Even if the test is negative, you should make a "Genius" appointment at an Apple Store to have the machine tested more thoroughly.

  • HT201401 cannot open the menu and cannot even turn it off, the white apple image is displayed on the screen. how can i get into the menu?

    cannot open the menu and cannot even turn it off, the white apple image is displayed on the screen. how can i get into the menu?

    Hold down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple logo appears - ignore the red slider.

  • I have a macbook pro 15 retina - when ever I connect to bluetooth speaker, I get this loud noise coming from the speaker - if I turn bluetooth off, the noise is now coming from the macbook speakers

    I have a macbook pro 15 retina - when ever I connect to bluetooth speaker, I get this loud noise coming from the speaker - if I turn bluetooth off, the noise is now coming from the macbook speakers & stays until i restart.

    Hi John. Thanks for that input. At Step 6, after clicking "Next" I get a window telling me my OS version is unsupported and the installation may not complete. I am prompted to go to Canon's web site to "Check Latest Info".
    I've had this window on previous attempts and from Canon's web site I downloaded two drivers as follows
    - ICA Driver V4.0.0
    - Canon IJ Network Tool V4.5.0
    I'm not sure if these are the correct / complete drivers I need for this install or not.
    I continue to follow all the steps. At step 9 I click "Wireless Set Up using USB" amd get a License Agreement (a little different than instructions)
    I click "Agree" and it goes to a Setup window with two progress bars showing the installation. I've not been prompted to connect the USB?
    After the Setup window is done, I am then prompted to connect the printer via USB. I connect the printer and click on "Redetect". It is not detected.
    I then try following the Canon on screen instructions for connecting to the wireless LAN amd enter the password. It searches and indicates "Connecting" on the window, but it never connects and the blue light just blinks
    So, at this point I am stuck??
    Thanks
    Stephen

  • Need to Turn it OFF  the Notification used by the AIA Common Error Handler.

    Hi All,
    My requirement is to turn it off the Notifcation send by the AIA common Error Handler, when the error occurs in the AIA ecosystem.
    Error Handling framework given by AIA does the Notification and Logging feature. In my case I need only the logging, but not the Notification. Notification has to be turned off for a time and has to be turned on when it is required.
    1) I can acheive this by removeing the email account file (ie. ns_email.xml) from the server directory and can be replaced at the time when required,but this needs the restart of the Server.
    Any Idea how to turn it off the notification and turn it on when required ?
    Thanks,
    Ashok.

    Hi Rohit,
    Thanks for your reply.
    Is there any way to turn it off the Notification, because if we retire the ReadJMSNotification Service all the error message are stayed in the Topic and we have to manually drain the message from topic.
    And one more thing is how the error messages are published to that AIA.AIA_Error_Topic.
    Thanks,
    Ashok.

  • I have an unknown message on my iMac telling me to turn it off, the computer has also frozen apart from that massage

    i have an unknown message on my iMac telling me to turn it off, the computer has also frozen apart from that massage?

    Sounds like a kernel panic.
    What is a Kernel Panic?
    http://support.apple.com/kb/TS3742
    and  http://support.apple.com/kb/TS1892?viewlocale=en_US
    http://developer.apple.com/mac/library/technotes/tn2002/tn2063.html
    More details here:
    http://www.thexlab.com/faqs/kernelpanics.html
    Useful articles on how to avoid and eliminate kernel panics here:
    http://reviews.cnet.com/8301-13727_7-10344626-263.html?tag=mfiredir
    http://www.macworld.com/article/2027201/how-to-troubleshoot-a-kernel-panic.html# tk.nl_mwhelp

  • Can you turn shuffle off the ipod shuffle 4th gen?

    can you turn shuffle off the ipod shuffle 4th gen?

    Mellerris123 wrote:
    can you turn shuffle off the ipod shuffle 4th gen?
    Yes.
    Power switch.
    1st notch is Off.
    2nd notch is play in order.
    3rd notch is play shuffled.

  • After my computer has been asleep and I touch my trackpad, it wakes enough to show my icon but not enough to acknowledge my keyboard or trackpad so I can type a password.  It seems the only way to make it work it to turn it off the back button.

    After my computer has been asleep and I touch my trackpad, it wakes enough to show my icon but not enough to acknowledge my keyboard or trackpad so I can type a password.  It seems the only way to make it work it to turn it off the back button.

    The reason, I included the annotation that I'd upgraded my Itunes, (On my Computer) is B/C in many forums - the very first question, *HELPERS* ask, is. "Do you have the latest version of Itunes downloaded on your computer." I wanted to knock out any obvious replies.
    Now-  "DO YOU have any idea,"... how your UNHELPFUL remarks, do absolutely nothing but hurt others that might not have the EXPERIENCE you have? How do you expect people to know things without asking questions? Whew! RUDE!!
    Message was edited by: Apple I0S Help Team

  • Cannot turn shuffle off the Ipod feature

    My music keeps shuffling on my iPhone 4.  What is the deal here?  How can I turn it off when I set it so it wouldnt shuffle to begin with.

    Mellerris123 wrote:
    can you turn shuffle off the ipod shuffle 4th gen?
    Yes.
    Power switch.
    1st notch is Off.
    2nd notch is play in order.
    3rd notch is play shuffled.

  • A day ago, my phone was freaking out, saying all these apps had stopped working, so I turned off and immediately after turning it off the dual core screen with the red M came up and wont turn back on-

    A day ago, my phone was freaking out, saying all these apps had stopped working, so I turned off and immediately after turning it off the dual core screen with the red M came up and wont turn back on…

    http://www.verizonwireless.com/support/knowledge-base-26502/
    Above if battery pull/soft reset doesn't help. If it's boot looped may need new equipment

  • No IP address, everytime I'm close to my mums mac running off the same wifi, it's giving me this error. I can trouble shoot for about 3 mins and fix it, but it just keeps happening and I need a permanent fix for it. Any help?

    No IP address, everytime I'm close to my mums mac running off the same wifi, it's giving me this error. I can trouble shoot for about 3 mins and fix it, but it just keeps happening and I need a permanent fix for it. Any help?

    this is what you need to do to exclude everything apart from desktop.
    on time machine preferences, click on Options
    click plus sign, on the new window, click macintosh HD
    do a Control + A then deselect users then click okay
    go to options again, plus sign, go to users, control +A then deselect your user account
    go to options again, plus sign, go to your user account, control + A, deselect desktop
    start the back up.

  • Does anyone know how to switch off the internal wifi test use a wifi dongle at a usb input?

    HI
    I am having problems connecting to wifi with a new Mac.
    I have tried all kinds of things like shifting and monitoring my router's channel.
    Short of using a power cube or crawling under the house and running a cable I have decided perhaps to use a Netgear wifi dongle.
    I would like to switch off the internal wifi and allow the external device to connect.
    With a new machine I really don't see why I have to do this.
    Incidentally all my old devices have no problems with the wifi signal.
    Cheers
    Jack

    Thanks for the suggestions.
    Yes I have done all that was suggested on that site.
    i have also been in contact with Apple Care.
    I have also reset the router firmware.
    I downloaded a piece of software called inSSIDer and checked out other wifi channels in the area. I moved my preferred channel to another ones that looked better however that is back on auto now and the router seems to be picking up channel 6 which is the best one and scores the most points.
    I use a netgear wifi dongle on my 'smart' tv and was thinking of using that however I am beginning to thisk that 'powerline' products may be the answer.
    The Mac is only two weeks old and I seem to be messing about with the wifi connection most of the time.
    I actually cleaned the whole disk and reinstalled the operating system earlier this week.
    Desperate or what!
    Sometimes I think I should just return it but I like to solve problems and will keep going for a while before I lose patience.
    Jack 

Maybe you are looking for

  • HT202213 how do i install a second ipod on one laptop and have it sync with only my music

    I have my son's ipod on my laptop and when he plugged it in it auto sync and made all the changes to music, games, etc.  I recently purchased an ipod for myself and went and purchased some songs.  However it downloaded the songs into my son's playlis

  • Schedule Manager SCMA

    Dear All, Is there any way to schedule the sub task after completion of a task automatically in schedule manager SCMA??as we execute the step one by one, so once the job is comepleted it should automatically trigger the step assign to that task. How

  • Need User Name/userid from Portal in WebDynpro Java application

    Hi All, I am using my Webdynpro for Java application as a iveiw in Enterprise portal. I want to get the Username/userid for the portal. how can we get that? Regards, Puneet Aggarwal

  • Exception in thread "main" java.lang.Error: Unresolved compilation problem

    The following code:      public boolean find(MusbachJ_Person person,BstNode node)           //p.l(person);p.l(node.intData);           if(node.intData.compareTo(person)==0)                return true;           if( node.leftNode != null ) find(person

  • Quicktime won't finish install on Windows 7

    I'm running Quicktime 7.7.1 on Windows 7 Pro. Everytime QT 7.7.4 is offered to me by Apple update I try to install it but it never completes for "reason unknown."  It suggests that I download and install manually, but that also always fails "unsucces