Schedule Power ON/OFF & CALL BLACKLISTING or Auto ...

Please, Enable the feature of call black listing or auto call reject, and the facility of schedule power ON/OFF.
also kindly make the camera flashlight work as torchlight.in adual sim phone..""::::::

Does it just go black, or does it appear to power down, like "powering down, pres any key to stop".
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Lenovo A328 - Scheduled Power On and Off

I got my A328 recently and I used the scheduled power on and off to have my phone to power off at midnight and turned on at 7am in the morning everyday.
While the power off works perfectly, but I found that power on got problem. Some days it just didn't powered on as scheduled.
Can anyone help me out? Thanks in advanced!

The button at the top is actually the sleep / wake button. To power the device off completely (something you need not do except maybe during takeoff and landing), press and hold the sleep / wake button for approzimately 5 seconds then follow the on screen directions.
Just pressing and releasing the sleep / wake button turns off the screen and puts the iOS device in sleep mode.

HT201412 My iphone 4s Doesn't respond or power on/off !!!!!!

My iphone 4s Doesn't respond or power on/off, The screen is like if it is turned off, no voice no nothing, but when I call it from another phone it doesnt say that it is off, I hear ringing but my iphone is dead with no voice or light or anything,
This happened to me before the iphone battery was 20% and after 5 min this happend, I connected it to the charger for more than half an hour but even the red battery light that indicate the recharging process didn't came up, after 3 hours when I gave up and was going to find someone to fix it I put on the charger for the last time and it WORKED so I thought maybe that was something with the battery and no problem, Than was 2 months ago, It happened again this morning I found the same thing and tried everything but nothing works .. after 3 or 4 hrs it worked again,
What is wrong with my iphone? it's new I bought it 4 months ago, never falls on the ground as I take very good care of it, what should I do?
The problem is that I Live in Kuwait, and when I searched for apple support in Kuwait I found nothing, What Do u guys think the problem is? what should I do about it ?

Maxitrol_phd wrote:
Isn't this Apples's official forum? I mean 2 days, 49 reviews but no response? What is going on?
No, it is not Apple's official forum. It is a user to user forum. If no user knows the solution then no one will post an answer. Likewise if no one understands your question.

Printer offline no lights on panel power on/off button however UV scanner lit so power to printer

Can any one please help/advise on nsolution if any. My HP Officejet J6410 All-in-One has stopped working.
None of the keys on the panel are lit including the power on/off button however there is power to the printer as the
UV light is illuminated when I switch the mains on, when I switch the mains power off the lights all flash.
I have tried using the HP troubleshooter eventually this stops with error code 0x03c010b.
Thanks

@mikej1, Welcome to the HP Forums
I understand your Officejet J6410 is not fully powering up, and you have caught the printer showing an error code. I hope to help you with some information, some steps to try and my own suggestions.
What comes to my mind when reading through your issue would be that there could be a power problem with the printer, or the printer itself could have a printhead failure, ink system failure, or a general printer failure. To attempt to work on these issues, I would suggest trying the power related guide first, and then try making a copy from the front of the printer if the power will remain on without an error message or code.
When you are going through these steps, and come to resetting the printer, it's best to make sure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power.
HP Printers - The HP Printer Does Not Turn On or Respond When the Power Button is Pressed
If the steps do not help to improve the symptoms at all, consider giving us a call directly to inquire about your printer options with HP, such as a new printer, replacement, or trade in.
If you do see some improvement, I'd like you to tell me what happened and we can go from there depending on the results!
If you're feeling thankful for my efforts to help you, click the "thumbs up" below to send me a "thank you"!
Here is our contact information if you decide to reach us directly:
Reach our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Photosmart C8180 Power On/Off Itself

The printer started turning itself on when everything was off, and putting on quite a light show. I unplugged it at both ends several times, waited several minutes and then it went through many gyrations of on/off, an error message BA07AF30 or similar sometimes appeared. I finally got it to going after removing/resinstalling all the print cartridges; then, in the middle of a printing a page the power turned off/on. What should I try to get it working normally again?

Throw it in the river and purchase a different brand. I have the same problem with 3 of them. I spent an hour on the phone and paid for nothing. The tech people just down a check list and did the same thing I did before calling tech support. I purchased 4 of them about 15 months ago and within the last three weeks 3 of them will not shut off, they just turn on and off and on and off and never stop..............great product until warranty ran out.........Canon here I come...

My Sony TV power turns off and back on during a Sk...

LS,
My Sony TV power turns off and back on during a Skype call... Is this a known issue...?
Bassam

Try a reset or restore

My iphone froze last nite and i was unable to exit the app i was on, it then switched the screen off as if it was not in use, now i am unable to open my iphone or switch it off, calls are still comin thro as phone is vibrating but im unable to answer

my iphone froze last nite and i was unable to exit the app i was on, it then switched the screen off as if it was not in use, now i am unable to open my iphone or switch it off, calls are still comin thro as phone is vibrating but im unable to answer as cant activate the screen?????
pls help

See Here for > Frozen or unresponsive iPhone
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430
More Info here...
https://discussions.apple.com/message/19521062

Profile 1 = INACTIVE, Radio power mode = OFF

Hi everyone,
I've been struggling this for a moment, and i can't figure it out how to resolve this in turning on the radio power mode. Help pls? Thank you very much.
sh cellular 0/0/0 radio
Radio power mode = OFF, Reason = Unknown
Current Band = None, Channel Number = 0
Current RSSI = -0 dBm
Band Selected = not selected due to invalid band mask

These is the model. It supports 3G network and i used it for backup connection. But in my queries i saw that my cellular interface has the status stating "radio power off". Now, how will i keep that on? Thanks.
CISCO2911-SEC/K9
Cisco 2911 Security Bundle w/SEC license PAK
NAME: "CISCO2911/K9 chassis", DESCR: "CISCO2911/K9 chassis"
PID: CISCO2911/K9 , VID: V05 , SN: FGL1548143Y
NAME: "WAN Interface Card - HWIC Serial 2T on Slot 0 SubSlot 0", DESCR: "WAN Int
erface Card - HWIC Serial 2T"
PID: HWIC-2T , VID: V04 , SN: FOC15426LRB
NAME: "3G WWAN HWIC-HSPA/UMTS/EDGE/GPRS-850/900/1800/1900/2100MHz on Slot 0 SubS
lot 1", DESCR: "3G WWAN HWIC-HSPA/UMTS/EDGE/GPRS-850/900/1800/1900/2100MHz"
PID: HWIC-3G-HSPA , VID: V02 , SN: FOC15463A9E
NAME: "Modem 0 on Cellular0/1/0", DESCR: "Sierra Wireless MC8790"
PID: MC8790 , VID: 1.0, SN: 011955005170891
NAME: "4 Port FE Switch on Slot 0 SubSlot 2", DESCR: "4 Port FE Switch"
PID: HWIC-4ESW , VID: V01 , SN: FOC15440ZJ6
NAME: "WIC/VIC/HWIC 2 Power Daughter Card", DESCR: "4-Port HWIC-ESW Power Daught
er Card"
PID: 800-IL-PM-4 , VID: V03 , SN: FOC15436Y6W
NAME: "C2911 AC-POE Power Supply", DESCR: "C2911 AC-POE Power Supply"
PID: PWR-2911-POE , VID: V01 , SN: AZS153700P7

IPad won't print wireless since power went off and on yesterday, but will print wirelessly from laptop. What do I do?

iPad says my printer is off line ( since power went off and on yesterday. My laptop prints wireless though so I am wondering how to get my IPad back to printing?

Restart your printer and router by removing power to them for 30 seconds.

Iphone 4 and how to turn off calling/phone

My mom got a new phone and said i cluld have her old one using it as an Ipod touch. It is already set up as a new iphone but I don't know how to turn off calling forever. how do i turn off calling??

If the SIM card in the phone is disabled, you will not be able to use it as a phone.

Regarding bdc , how to handle records when power is off

hi experts
whenever i update the records by session method suppose after 100
records power is off, then how i can handle the records now.
this is frequently asked me .
please replay.
thanks
subhasis.

put the power on again, and go to transaction SM35 and search for your session.
regards,
Hans
Please reward all helpful answers !!!!!

When is SAP XI 3.0 scheduled to go off of support?

Hi Experts,
Please point When is SAP XI 3.0 scheduled to go off of support ?
as we are suggesting to upgrade XI 3.0 to PI 7.1
Thanks in Advance,
MK

Hi Experts,
I have checked the SAP Netweaver 2004 PAM in SAP market place, which says that mainstream maintainence end date of SAP Netweaver 2004 is 30.03.2010.
will that applies to SAP XI 3.0 as well, as it is a part of SAP Netweaver 2004.
Please advice .
Thanks,
MK

Error PWRCYCLE: Card in module 7, is being power cycled off

I have Cisco IDM version 6.1(2)E3.This IDM is module type which once with core switch.The problem its when each time want access GUI use https://10.x.x.x out error 443 and I forced reset ips use command line. When I show log at core switch found PWRCYCLE: Card in module 7, is being power cycled off (Module note responding to Keep Alive polling).
Any body help me...

The PWRCYCLE log entry in your switch is expected when you reset you sensor. A sensor reset will reload the sensor taking it off the power bus and putting it back on. This results in several switch log messages about the sensor on slot 7.
Your GUI access problem is a different matter. Search this forum for the symptoms you are experiencing. There have been many working solutions to GUI problems posted here.

My iPad mini is locked due to the "no backup in past 2 weeks message." I can't power it off or get rid of this message. HELP!

My iPad mini is locked due to the "no backup in past 2 weeks message." I can't power it off or get rid of this message. HELP!

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

My sister spoiled water into my macbook pro and the power went off in two seconds. I took off the cover and dried the water with tissues. Still it doesnt work. What do i do?

My sister spoiled water into my macbook pro and the power went off in two seconds. I took off the cover and dried the water with tissues. Still it doesnt work. What do i do?

Do you mean when the water was spilled on it, it shut down? That would indicate a major internal short occured.
Really, I'd say you need to take it into Apple or an Apple authorized repair center and get it looked at. Odds are you've got a significantly damaged device that will require professional repair and parts replacement to get working again.

Schedule Power ON/OFF & CALL BLACKLISTING or Auto ...

Similar Messages

Maybe you are looking for