Schedule report at every half hour interval from 5:30 AM to 5:00 PM

Hi,
We use BOXIR2 and our client has requested to schedule a RealTime Webi report at every half hour interval from 5:30 AM PST to 5:00 PM PST daily.
We tried scheduling the report but there is no option present in BO where we can select the start time or end time for a day.
Could you please let us know how we can achieve this?
Thanks,
Nikhil

Hi Ashwini,
I believe its not a good idea to set the date daily. After a lot of research on this, I found that there are 2 possible solutions for this.
1. Create 24 daily schedule for the report(s).
             i.e.
              1.     daily 8 am
              2.     daily 8:30 am
              3.     daily 9 am
              4.     u2026
              24.                daily 5 pm
2. Create a batch file that will craete a file and delete it after 10 secs. Upload that into Windows scheduler as it will run this batch file at every half hour and till 5PM only. The file created by batch file will be trigger to run report.
Does that sound good?
Thanks and Regards,
Nikhil

Similar Messages

Scheduling scenarios for every half hour in ODI 11g

Hi,
I am using ODI 11g.
My requirement is to execute a scenario after every half hour.
I can just see that scenarios can be scheduled on hourly basis only.
Please guide me how can i schedule scenarios on half hourly basis also.
Thanks,
Divya

Hi Divya,
Open your scheduling and go to Execution Cycle tab and Under Repetition select "Many Times", then set "Interval Between Repetitions " as 30 minutes or so.
Thanks,
Guru

Job to execute every half hour

Hello,
I need to create a job which should execute every half hour starting from morning 6:AM to evening 4:PM every day.
How can I do this?
Thanks

Try something like this
VARIABLE jobno number;
BEGIN
DBMS_JOB.SUBMIT(:jobno,
'begin if (to_char(sysdate, 'HH24MI') between '0600' and '1600') then my_proc; end if; end;'
TRUNC(SYSDATE, 'HH')+ 1/24,
'TRUNC(SYSDATE,''MI'')+30/(24*60));
commit;
END;
Message was edited by:
Jens Petersen

Radio streaming stops every half hour or so.

I stream a radio station. However it stops every half hour or so. How can I keep it going? Internet speed is down 80 and up 9 megabits.

Well, I don't know if you actually read my post, but I've already upgraded the firmware and power cycled it. Those setting are at their defaults: 100 for beacon interval, 2346 for frag thresh, and 2432 for RTS thresh. But, I did change them to the provided numbers yesterday; no change.
Let me provide some more info. I also share my wireless internet connection on my laptop and hook up my Xbox 360 to it. Also, the router is three years old. Is it normal after this time frame for it to start malfunctioning? Should we go out and get a new one? I'm talking purely by hardware lifespan right now, we don't need a new one just because it has some more bells and whistles; the one we have now has worked well up until now.
Thanks again.

Report for every 1 hour

I wanted to take out a report for every one hour, the count, i used trunc(x_date,'hh24') to take the report, but the problem is, for few hours there wont be any count, so i have to substitute with zero there, any ideas ?,

Hi,
If you want to make sure all hours appear in the result set, even if they don't appear in the table, then outer-join to a table (or, in the example below, a sub-query) where you know they do exist.
For example, if your table_x has columns entry_dt and amt, and you want results for every hour of the day, you can do somehting like this:
WITH     all_hours     AS
     SELECT     TO_CHAR ( SYSDATE + (LEVEL / 24)
               , 'HH24'
               )     AS hr
     FROM     dual
     CONNECT BY     LEVEL     <= 24
SELECT       a.hr
,       COUNT (entry_dt)     AS cnt
,       NVL ( AVG (amt)
           , 0
           )               AS avg_amt
FROM           all_hours a
LEFT OUTER JOIN      table_x    x      ON   a.hr = TO_CHAR (entry_dt, 'HH24')
GROUP BY a.hr
ORDER BY a.hr
;COUNT never returns NULL, so you don't have to use NVL with COUNT.
For other aggregate functions (such as AVG) you do need to use NVL to get 0 instead of NULL.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only), and the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say what version of Oracle you're using.

Weird Sync Message Every Half Hour

About Every half hour, I get the following message or something very similar from RIM. It is filling up my Blackberry and my Outlook Inbox and is very annoying. I deleted my e-mail once and it stopped for a few hours before resuming.
I am connecting to my Outlook through the Web. My e-mail is on an exchange server.
I would love any thoughts that anyone may have. Here's the message.
The message comes from:
[email protected] or something similar. The etp# is usually changed slightly.
Here's the message...
This message is used to carry data between the BlackBerry handheld and an associated server. Please do not delete, move or respond to this message - it will be processed by the server.
BEGINETP 112
AYgCa94AAAAAIBAIMjA4Qjk3QkIgFWppbUBzdG1vdG9yc3BvcnRzLmNvbQBd4WLyUAVDTUlN
RQNAgICAgDIAADA5MDEwRjU5QStHKzEAmGpxyGHZr92CGJWLpbQFSgAZa1oD/MpIpQgJLLtK
lEG0kQ!!
ENDETP 1895240953
Solved!
Go to Solution.

9/10 times this is caused from someone installing the blackberry desktop manager program as 'BES' rather than BIS...
The email you are getting is for when a device is to be connected to the Blackberry Enterprise Server within a company.
You have either install the Desktop manager program incorrectly (highly likely so uninstall it) and also check under options > advanced options > Enterprise Activation - that you have nothing in here..
See here >>>> Network@etp messages arrive on the BlackBerry smartphone
If your issue is resolved, put a checkmark in the green box that contains the resolution.
OR
If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
~Gday from Down Under~

Phone dings every half hour

Hi there
I'm wondering if anyone knows why my landline is making a little ding noise twice every half hour? It's a Wild and Wolf series 302 plug in phone. It doesn't have a separate power supply, and is plugged into an asdl filter.
It's been dinging every half hour since we first plugged it in on Saturday. Phone line normal (had engineer out on friday for separate issue).
It does it at 5 past the hour and 35 mins past the hour which is a bit strange.
Any thoughts?
Thanks in advance

A phone line has 50DC V on it provided by an Exchange Battery... When you receive an incoming call it converts to 75AC, it sends the 75AC in two short bursts repeatedly which hits a capacitor within the NTE/LJU and in the case of most modern phones, especially cordless a capacitor in them, this then trips the bell in the phone to go Ring Ring, Ring Ring, Ring Ring......
Anyway, your phone may not have a capacitor, just because it's modern doesn't mean it will. What kind of phone socket do you have? Is it a BT or Openreach branded NTE5a?
I was gonna suggest if you have a non standard LJU such as a decorative one it could be it has no capacitor and AC leakage from other circuits causes your phone to tinkle but as its every 30 mins that's unlikely?????
if the ringing was random it would make more sense, i know the Exchange does routine night testing but that's not every night and it's only done at night, never during the day and they would test the same line every 30 mins so it won't be that.......

Internet connection deconnects every half hour ! can i prevent that ??

It's getting me crazy. I can't find where to turn off the bloody reminder from Internet Connect that wants to deconnect me every half hour if i don't click OK.
If i download something i always get cutoff ! Help please...

Follow the instructions in this FAQ.
(15883)

How to schedule reports to be run and sent from Ad-hoc query.

Dear Abapers,
I got a requirement in which the user wants to know how to schedule reports to be run and sent from Ad-hoc query.
Regards
Venkat

Ask him to look more carefully at the menu : Quickview > Execute > Exec. in background, then click on schedule
Regards,
Raymond

How to put sync on automatic. example , every hour or every half hour.

is it possible to have sync on automatic.
so i have every (half) hour a new update?
thanks rené

Hi Rene!
Sync synchronizes the status when some changes happen. The team has been working in create a Instant Sync feature that will arrive in the next version of Firefox (Firefox 7).
What you are trying to do it's not an available feature.

Disconnection every half hour on 802.11A and G

Hello,
we installed our 14 APs "1131", WLC version is 5.2.178.0.
we are testing it at the moment, but it seems that each clients are disconnected every half-hour, on all radio slots and we have only one WLAN.
I thought it was DHCP lease issue because I configured for renewal every hour and DHCPREQUEST start at 50% of lease, but I reconfigured it for DHCP lease at one day.
Can you help me on how to debug it ?
thanks

Check the parameters for things like your authentication timeouts & key rotation times.
It might also be worthwhile to do a spectrum scan (netstumbler - www.netstumbler.com - it's free) and see if there's some external interferer.
You don't provide many details about the size, spread, number of users, etc, so answers are going to be fairly general. Post your(sanitized)config if possible.
Good Luck
Scott

Why every half hour or so does my iPad camera app stop working?

Every like half hour or so my iPad camera app stops working. I tap and It and a blank screen appears. If I turn my iPad off and on again it works fine.

There are any number of reasons why that might be happening. An app confict, low memory (that's not supposed to happen but ...), so it's hard to say for sure what the issue could be.
You could try closing the camera app until you need again, and see if that makes any difference. Unless you really need to get to the camera app every half hour for whatever reason, there should be no problem in quitting the app.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps.
Then just launch the app again when you need it.

Autorun Package in every half hour

Hi All,
I have a package and i want this package to run every half and hour. Can anyone help me in writing a scheduler for same.
Regards

I have a package and i want this package to run You cannot run a package. You run individual program units contained within the package.
i want [a program unit in] this package to run every half and hour. Can anyone help me in writing a scheduler for same.You don't have to. Oracle already has one.

Schedule run after every 2 hours

hi all,
i want to create a schedule which will run after every 2 hours.. mean.......ist run 12 AM then 2AM then 4Am.............10PM.
how its possible.....

Yes it is possible,
1. Go to scenario, right click on scheduling and click on 'create schduling'
2. give the neceessary information for agent and context
3. select execution type as daily and enter 12.00 am
4. click on Execution cycle, select 'Many times' , enter, maximum cycle duration = 24 hours
interval between repitition 2 hours
And save
Hope u have created the schduler agent
Regards
Reshma

Signed out by forum every half hour!

If I've posted a topic and and following replies throught hte day - I am only kept signed in for a half hour at most! It is so frustrating to have to sign in 10x a day to use the forum. Can I adjust this setting anywhere? and no matter how many times I click the "remember me" checkbox - it NEVER does. Please help!

karenf1 wrote:
But it never happened here before the Adobe hacking. And I belong to meany forums and have never seen anything that approached this in severity. Sometimes I don't even get 20 minutes grace period!
Have you cleared the browser cache files using two different methods:
1) By going to Tools >> Options >> Privacy >> Clear your recent history
2) Launching your Windows explorer and going to:
<C:\Users\USERNAME\AppData\Local\Mozilla\Firefox\Profiles\yqbn3ldc.default\Cache>
replace USERNAME with your Windows profile ID
In December I wasn't able to login at all and miraculously, everything started working again in mid January.
So a clean start may be required for some user profiles.
My suggestions above applies to Mozilla Firefox only but it can be adapted for other browsers.

Schedule report at every half hour interval from 5:30 AM to 5:00 PM

Similar Messages

Maybe you are looking for