Schedule Reporting doesn't work

Morning all,
I have a question regarding scheduling reports. I created two reports and set their schedule to:
First Report
1: Run Daily for 8 days
2: Start from 29/07/2008 to 08/08/2008
3: Specific recipients
4: specific parameters
5: Schedule time 22:30
Second Report
1: Run Daily for 31 days
2: Start from 01/08/2008 to 31/08/2008
3: Specific recipeints
4: specific parameters
5: Schedule time 22:30
Both reports scheduling is set by going into Infoview and set the scheduling by clicking on schedule.
I can see the scheduling is set properly because when I click on reschedule it showed the right settings however, it is not working.
Well it worked for one day meaning I set schedule for the first report on the 29th and I recieved an email with pdf yesterday however, i didn't recieve anything today.
I cannot see any error messages under Report server nor under History of Report Object.
The report object history shows:
29/07/2008 22:30   LabReworkDailyReport steven 300.000; 359.000 Adobe Acrobat Success Reschedule
     29/07/2008 22:30   LabReworkDailyReport steven 300.000; 359.000 Adobe Acrobat Recurring Reschedule
     29/07/2008 22:30   LabReworkDailyReport steven 100.000; 202.000 Adobe Acrobat Success Reschedule
     29/07/2008 22:30   LabReworkDailyReport steven 100.000; 202.000 Adobe Acrobat Recurring Reschedule
This report only ran for one day but not running daily.
where and what am I doing wrong please advise.
Many thanks
Kind Regards
Jehanzeb

Fixed!!!
The Frequency should have been set to 1 day not 8 days. I was wondering what it was until I clicked on the Recurring link and saw it said
Object Runs once every 8 days!
I was like nooooooooo it should run every day!
So changed it to 1 day and set it again and now it should work.
Regards
Jehanzeb

Similar Messages

All of a sudden, report doesn´t work anymore

Getting really tired of this whole SCOM-thing the last days.
Now the reporting doesn´t work anymore. We changed NOTHING.
State went from Zero to Healthy 4:14 PM on friday last week. Alright.
But a few hours later, when nobody was here anymore, it changed to EROR.
How can that happen?
Reports are EMPTY suddenly. You can't start report-tasks anymore. They disappeared.
We checked:
- Discovered Inventory -> Data Warehouse Synchronization Server
- State is Critical.
- Display name is wild numbers+characters, is this normal?
- Health explorer says:
'DeploymentException': Failed to deploy reports for management pack with version
dependent id '471cffe4-2085-cf71-2513-ecbac52be31f'. Failed to deploy report
'Microsoft.Windows.Server.Reports.PerformanceBySystem'. AdjustDataSources:
Exception <ErrorCode
xmlns="http://www.microsoft.com/sql/reportingservices">rsItemNotFound</ErrorCode><HttpStatus
xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">The item '/Data
Warehouse Main' cannot be found.</Message><HelpLink
xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsItemNotFound&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.2100.60</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server
Reporting Services</ProductName><ProductVersion
xmlns="http://www.microsoft.com/sql/reportingservices">11.0.2100.60</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem
xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message
msrs:ErrorCode="rsItemNotFound"
msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsItemNotFound&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.2100.60"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">The item '/Data
Warehouse Main' cannot be
found.</Message></MoreInformation><Warnings
xmlns="http://www.microsoft.com/sql/reportingservices" />

Hi,
Generally these errors are caused by improper SQL SRS configuration, to confirm SRS is initialized correctly, are you able to navigate to http://localhost/reports or http://localhost/reportserver?
Are you upgraded to SP1 RC yet and have you the latest versions of the MP' as a lot of these reporting issues have been resolved?
Also re-check all your SRS accounts have the relevant permissions and all permissions in IIS are correct?
You could try resetting the SRS configuration and re-install Reporting.
1. COPY the ResetSRS.exe file in SupportTools folder of the OM 2007 media to
C:.
2. Open a Command Prompt and change your path to C:.
3. Type "ResetSRS.exe MSSQLSERVER" where MSSQLSERVER is your SQL instance
name.
4. Then open Reporting Services Configuration Console, select Web Service
Identity and click Apply.
5. Finally, reinstall your reporting service by running OMSetup.exe again.
In addition, please provice the event ID under event vierwers, so that we could analyze it further.
http://social.technet.microsoft.com/Forums/systemcenter/en-US/0a66dfa4-a39c-44c4-93cf-ca064d6bc52c/scom-reporting-error-rsitemnotfound-?forum=operationsmanagerreporting
Hope this helps.
Regards,
Yan Li
Regards, Yan Li

UCCX 8.0(2) SU4 - Schedule future report doesn´t work

Hi Guys,
I and my Customer are trying to do schedule future report and doesn´t work. We setting the time feature and another features correctly. Any have idea about this?
Thanks,
Wilson

Hi Wilson,
You can find the information regarding the scheduling of HR reports in the HR user gude. It is similar for 8.0 as well:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/user/guide/uccx85hrug.pdf
What is the OS on which HRC is installed? ALso please ensure that the Scheduler is running on the system tray. If not then manually run the scheduler. If it still fails, then please collect the Scheduler and the HRC logs.
Regards,
Arundeep

Link to detail Report doesn't work.

Hi, we are using Webi for On Demand reports (against Salesforce universe) and the hyperlinks to details reports are not working.
my URL in master report looks like this:
="<a href=https://na.crystalreports.com/opendoc/openDocument.do?iDocID=48877773&sType=wid&sWindow=New&lsMFocusBook="[Focus Book]"&lsMSegment="[Segment]"&lsMAccount="[Account Name]">"[Segment]"</a>"
and UR in detail report appears as:
https://na.crystalreports.com/opendoc/documentXML.jsp?cmdP1=untitled488777731wid*&token=&cmd=askPromptView&cmdBlock=all&cmdP2=lsMSegment%3D%255BSegment%255D%26sWindow%3DNew%26useCustomPrompts%3DY
Some how details report doesn't recognise the propmpt values and always asks to fill prompts.
can some one advise?
Thanks

Hello,
The openDocument.do url was really only designed for use with Crystal Reports documents.
It is not officially supported for webi documents, or any of the other document types.
That being said, it sounds like opening webi docs with openDocument.do does work, it is just the parameter passing that is problematic.
Cheers
Steve

Web fault reporting doesn't work

My phone line was tested and it came back as working but it isn't. I have removed all extensions and tested with 2 different phones at the master socket and a fault still occurs. The line works after a fashion but doesn't ring properly and also sometimes loses the incoming phone number information. Broadband is ok.
But the BT web site won't allow me to report it because the line was tested as ok but I know it isn't. This is a failure of customer service.
Also this link doesn't work (I am using Mozilla Firefox not Internet Explorer but this shouldn't make a difference)
https://www.bt.com/consumerFaultTracking/public/faults/reporting.do?pageId=21&s_cid=con_FURL_faults
So I can't use the web site to report the fault and I had to call an 0800 number with a mobile.
Not good.

The website is working fine from your link posted also you can call BT from this number From a mobile: 0330 123 4151 the charge for this call will come from you mobile calling plan
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Scale of the graphic in interactive report doesn't work in french

Dear all,
I created a calculation column in an interactive report an put the format 9999999D99. When I displayed the information everything is ok.
After that I tried to create a graphic with this column.
The graphic is the type line
The value is this new column
The function is SUM
order by label ascending
The graphic show the good information, when I click on the dot the right number is displayed (19459,10). But if I look on the scale on the left the numbers are not good, we see 25,00000 instead of 25000,00.
The application use the navigator information the first language use is french. If I use english the numbers are ok.
What I need to do to use french and have the right decimal ?
Thanks for your help
Eric

Hi Pranay and Mohd,
here is the screenshot:
If I logon as Admin user (or I grant user Admin rights), it looks like this:
So the prompt is visible but is empty. I changed privileges in CMC / Applications / Web Intelligence, so normal user has same right as Admin, but it still doesn't work. I also tried change user security in Connections and Universes, but none of them work.
Please, do you have any idea what i miss?
Thank you

Scheduled reports are not working

Hi!
We have a couple of scheduled reports that we have had for a while now.
They have now stopped working. All of them have the following error:
Error: Thread was being aborted.
I have seen people have this problem if the servers load is to high and all reports are running at the same time.
That is not my case. I have tried to scheduled just one report and I get the same error then.
Where can I start the troubleshooting?
Best Regards
Askunge

Look at the SSRS logs located in the folder "C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\LogFiles" if you leave default path durning installation.
Number "10_50" depends on the version of the SSRS.
Regards,
Ivan
This is what I found. Anyone have a clue what I should do to resolve the problem?
notification!WindowsService_802!79c!04/28/2014-08:00:41:: Error thrown by delivery provider: System.Threading.ThreadAbortException: Thread was being aborted.
   at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.Deliver(Notification notification)
   at Microsoft.ReportingServices.Library.NotificationQueueWorker.HandleNotification(QueueItem item)
library!ReportServer_0-815!1cdc!04/28/2014-09:31:05:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: This operation is not supported on a report server that runs in native mode., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: This operation is not supported on a report server that runs in native mode.
notification!WindowsService_803!1a68!04/28/2014-13:10:03:: Error thrown by delivery provider: System.Threading.ThreadAbortException: Thread was being aborted.
   at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.Deliver(Notification notification)
   at Microsoft.ReportingServices.Library.NotificationQueueWorker.HandleNotification(QueueItem item)
notification!WindowsService_803!79c!04/28/2014-13:00:11:: Error thrown by delivery provider: System.Threading.ThreadAbortException: Thread was being aborted.
   at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.Deliver(Notification notification)
   at Microsoft.ReportingServices.Library.NotificationQueueWorker.HandleNotification(QueueItem item)

Interactive Reports - group by in SQL - download reports doesn't work

Hi,
I have the following SQL as the region source of an interactive report.
select SERVICELEVEL, SUM(CONTRACTVALUE), SUM(DOLLARVALUE), count(SERVICELEVEL) from "ACSPROD"."CONTRACT" where CONTRACTSTATUS='Active' group by SERVICELEVEL
The report shows exactly as expected. I have also integrated BI Publisher 10.1.3.4.1 with APEX 3.2.0.00.27
Problem 1
The report download doesn't work for any of the formats (CVS/XLS/PDF/RTF). When I rewrite the SQL without the group by clause (not the wanted results), then the report downloads work.
What am I doing wrong?
Problem 2
Irrespective of the above issue - when I add a sum aggregate and download the report (any format) - it doesn't show the summed value.
What am I doing wrong?
Please advise!
Cheers
Mynhardt

Hi Pratadamski ,
I could reproduce this issue at my end. This is a bug. So, I have filed on your behalf (6432429).
When i use tables ( not views) directly in my SQL and use column alias for computed column, it does work fine!
i.e., this query is good with databinding at designtime and runtime:
SELECT ALL trip.PersonID,
COUNT(*) AS Num_Trips
FROM trip
GROUP BY trip.PersonIDThanks & Appreciate your feedback,
Sakthi

6i Reports doesn't work in 9IDS through web.

when I generate the report(which I built directly in 9IDS) through web it is working fine and also I can see contents in .html,.jsp and .gif (web source) files.
But if I try to run the report which I have built in Reports 6i, I am getting blank page(browser-IE6) and when I see the contents of .html,.jsp nothing is there, even in the web source also through report builder.Although I compiled it in 9IDS.
So how can I run my reports through web which I have developed in Report 6i?

The reports created in 6i is not directly target for jsp, so there is no web source even you open it in 9iDS. It is not possible to convert a paper layout to native web layout (otherwise, we don't need to distinguish it in 9i). There are some fundamental differences between these two models. If you want to reuse some report objects in jsp, we do provide <rw:include> tag to bridge these two on the object level.
Thanks,
-Shaun

Report doesn't work in BE but it works on Crystal Developer

Post Author: Suyin Ferro
CA Forum: Crystal Reports
I have a group of reports that don't work on the BE but when you run them locally, same data, same users they run. I moved one of this reports to a test environment and it worked, then I created a folder in my PROD environment and this time, after a while, I got an error in the screen
Error
null null
and a back button. Nothing else, I don't know what is causing this. These reports where running fine and like a couple of weeks ago, they stoped running. They just hang there forever, we already changed the time out setting and same behavior. Please, help!
I work in a school systems and the teacher reports are the one that don't work. Thanks in advance.

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Report doesn't work after upgrading Apex 4.1

Hi,
We have configured Apex to use BIP report, everything works fine until upgrading to 4.1.
The error message we got is below:
Error processing request. ORA-06502: PL/SQL: numeric or value error ORA-06512: "APEX_040100.WWV_FLOW_RENDER_QUERY", line 690 ORA-06503: PL/SQL: Function returned without value
Technical Info (only visible for developers)
is_internal_error: true
apex_error_code: APEX.UNHANDLED_ERROR
ora_sqlcode: -6502
ora_sqlerrm: ORA-06502: PL/SQL: numeric or value error ORA-06512: "APEX_040100.WWV_FLOW_RENDER_QUERY", line 690 ORA-06503: PL/SQL: Function returned without value
component.type: APEX_APPLICATION_AUTH
component.id: 136283513153502444
component.name: HTML DB
error_backtrace:
ORA-06512: "APEX_040100.WWV_FLOW_RENDER_QUERY", line 690
ORA-06512: "APEX_040100.WWV_FLOW_RENDER_QUERY", line 1544
ORA-06512: "APEX_040100.WWV_FLOW_RENDER_QUERY", line 1681
ORA-06512: "APEX_040100.WWV_FLOW", line 7154
It seems there's some problem with the source of the query (Shared Components->Report Queries). But we couldn't find the reason. Is it some kind of bug? Also, is there a way to know which line of the query raise the error?
Thank you in advance.

Hi Patrick;
I'm Xavier from Barcelona(Spain), I have teh same problem after upgrade my Apex 4.0.2 to 4.1. I print across BI Publisher, but now is impossible, when I try to print Apex send me this message :
Error Error processing request.
ORA-20001: The printing engine could not be reached because either the URL specified is incorrect or a proxy URL needs to be specified.
Technical Info (only visible for developers)
is_internal_error: true
apex_error_code: APEX.UNHANDLED_ERROR
ora_sqlcode: -20001
ora_sqlerrm: ORA-20001: The printing engine could not be reached because either the URL specified is incorrect or a proxy URL needs to be specified.
component.type: APEX_APPLICATION_AUTH
component.id: 6517320063874096
component.name: ESTUDIVIVES
error_backtrace:
ORA-06512: en "APEX_040100.WWV_FLOW_PRINT_UTIL", línea 117
ORA-06512: en "APEX_040100.WWV_FLOW_RENDER_QUERY", línea 1619
ORA-06512: en "APEX_040100.WWV_FLOW_RENDER_QUERY", línea 1681
ORA-06512: en "APEX_040100.WWV_FLOW", línea 7154
I try to use APache FOP, with the same result, and try with a new version of Apex 4.1 (not upgrade) in a new server, but with the same result.
Please Patrick, can you help me ?
Thanks in advance.
Xavier.

Pagination and interactive sort for drilldown report doesn't work fine

Hi Anyone,
I have a drilldown report includes three groups. I add the last group for pagination. But the details in each page doesn't accord to I specified and the detail record number is different in different page.
Another issue is the interactive sort always sort in the first page scope. I set the data region or grouping to the table, and evaluate expression scrope to Detail scope.
Anyone has experience on that?
Thanks a lot

Can you explain your scenario giving screenshot to make us understand how your groups are?
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

My JSP Report doesn't work !!! Help me !!!

What's up friends! I holp that so good!
My question is very simple, I've been building a JSP Report with JDev and Report Builder, but when I has tryed to run the report from inside JDev, the IE has started with the LOADING... page and nothing happened.
I have Oracle9iDS and Oracle91AS installed on the same machine, I started the HTTP Server and Oracle9i Report Service before run the report.
I've been reading a lot of documents but I don't know what I need to do.
What is missing to configure to work well?
Please, help me!!!

You need to create a JSP report from JDev's new object gallery from 'File -> new... -> Reports Objects', so that the project settings can be prepared to run JSP report.
If you want to run JSP report on a standalone Reports server, put 'server=<server_name>' in 'parameters' attribute of <rw:report> JSP tag.
You can also use rwservlet's in-process Reports server, by not specifying 'server=...' in 'parameters' attribute. No standalone Reports server is needed. Make sure JVM is set to'hotspot' in JDev's project settings -> runner.
When running JSP in JDev, it uses JDev's embedded oc4j web server.
Regards,

Adding insult to injury. Adobe's Wishlist / Bug reporting doesn't work.

I sure hope Adobe is reading these forums, because I haven't been able to submit a single bug / feature request through the proper channel, and I've given up trying. It's one thing to make is all BETA testers without warning us. It's just fanning the flames of fury when Adobe Staff tell us to submit a bug. It's at least implied that Adobe will not be reading / hearing the messages on this forum. And I can't even submit a bug report because that form is broken!
I've spent around 24 hours so far BETA testing their software for them, so I hope they are reading these forums with gratitude for our free services.
Unfortunately, I must get back to work, now. No more time for BETA testing today.

I haven't been able to submit a single bug / feature request through the proper channel,
Since it is not mentioned in this thread:
Copy/pasting is often the culprit when bug report/feature requests fail. The was a problem some time back when we were copy/pasting suggested text from a forum post. While it appeared there was a character limit (and there probably is), I suspected that invisible "junk" (html code or Word stuff) was being pasted. I have better luck pasting from a pure text editor. I have best luck typing it, and copying from the bug/feature form to keep a copy.
Another thread today complained they could not post a link in a bug report. I have had no difficulty posting a link to a forum thread.
There are of course times where web submissions fail for no good (apparent) reason. I find that very frustrating; don't get me started on Adobe forums and Jive. But as far as I know, the bug/feature system is not part of that.

Scheduled wake doesn't work

When I schedule a wake up at a certain time, it simply does not work. (Wake up is not password-protected.) I ran a test, setting a time for wake up a few minutes later, put my computer to sleep, waited, and nothing happened.

I finally found the solution, after having (needlessly) reinstalled Tiger: it was merely a corrupt preference file (/Library/Preferences/SystemConfiguration/com.apple.AutoWake.plist).
In case anyone from Apple Computers is listening, may I ask a couple of questions?
1) Why didn't a reinstall correct that? and, more importantly,
2) As there are frequent problems related to corrupt plist files, wouldn't it be a good idea for the Help to mention that possiblity, along with the location of the plist file in question?

Schedule Reporting doesn't work

Similar Messages

Maybe you are looking for