Schedule run after every 2 hours

hi all,
i want to create a schedule which will run after every 2 hours.. mean.......ist run 12 AM then 2AM then 4Am.............10PM.
how its possible.....

Yes it is possible,
1. Go to scenario, right click on scheduling and click on 'create schduling'
2. give the neceessary information for agent and context
3. select execution type as daily and enter 12.00 am
4. click on Execution cycle, select 'Many times' , enter, maximum cycle duration = 24 hours
interval between repitition 2 hours
And save
Hope u have created the schduler agent
Regards
Reshma

Similar Messages

Schedule my report to run after every hour

Hi All,
Can someone please tell me how can I schedule my report to run after every 1 hour so that the dashbaord performance increases.I have started the scheduler service .
Thanks a lot for your help

Hi,
create an ibot for the report.
first configure the BI delivers, you can find the steps here,
http://oraclebizint.wordpress.com/2007/09/13/oracle-bi-ee-10133-configuring-delivers-ibots/
sorry. as you have already started the scheduler service you don need to go thru the above link.
thanks,
karthick
Edited by: kart on May 24, 2010 12:44 PM

Exchange 2013 disconnects externally after every hour but works fine internally

Hello All,
I have a very strange problem in my office. At the new years eve, there was a disconnection in our Internet from our ISP and everything came back online again after 1 hour. before this happened everything was working fine such as externally all the mobile
devices were able to connect to exchange 2013 and event owa was working fine and laptop devices as well. All was good, but once the disconnect happened, i am only able to access my emails over 3 G connection but not over the ISP connection, what i mean from
that is that if i try to connect to owa or my outlook from home DSL connection i cannot connect but with my 3g connection on my phone i can connect and everything works fine. i have re issued the certificates and installed them again, but still the same thing,
after every hour or sometimes less the exchange 2013 sort of disconnects and starts working when i restart the CAS server where the traffic is routed to.
Has any one faced this issue, please help, i was thinking that something wrong with my firewall as i was not even able to connect to my ssl vpn so i thought that firewall is culprit, but i have replaced the firewall as well and still the same issue.
Please help, i am trying to troubleshoot this problem since last 10 days but with no luck.
Thank You.

Have you checked the network settings? Do you have multiple network adapters? May be DNS related also. Check, if you have configured DNS correctly.
Regards from ExchangeOnline.in|Windows Administrator Area | Skype:[email protected]

Update table after every hour

Hi friends,
I want to write a database trigger, function or a procedure that fires after every hour. check a certain condition and if satisfied update records of the table.
How can i do this????
Pliz help
mirza Imran Baig

If you have access to this site you have access to the documentation: there's a link from the OTN home page. For your convenience, here is the link to the DBMS_JOB docs: http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96612/d_job.htm#999107
You don't say which version of the database you have - this the 9i docs, but the 817 docs are also on OTN. Besides, I don't think DBMS_JOB has changed much.
Cheers, APC

HT3275 Time Machine on Macbook Pro and iMac both running 10.7.4 don't react the same. Macbook Pro runs back every hour even if asleep, and iMac only when it's awake. Why?

Time Machine on Macbook Pro and iMac both running 10.7.4 don't react the same. Macbook Pro runs back every hour even if asleep, and iMac only when it's awake. Why?

I thought the backup whilst asleep was only used on Mountain Lion.. but perhaps it was also introduced with Lion.. anyway it is only enabled on later firmware.. in latest laptops.
http://reviews.cnet.com/8301-13727_7-57480490-263/mountain-lions-powernap-featur e-requires-firmware-update/
A quick google finds all sorts of info.. remember google is your friend.

After upgrading to Firefox 9.0.1, on first run after every reboot, the following warning apears for every installed Add-on. "Another program on your computer would like to modify Firefox with the following add-on"

After upgrading to Firefox 9.0.1, on first run after every reboot, the following warning appears for every installed Add-on.
"Another program on your computer would like to modify Firefox with the following add-on"
So, i have to "Enable" my installed Add-ons on each reboot.
Would you please help me !
P.S.: I found that these files (and some others) will be deleted on each reboot, and it happens on computer start up (not at shut down)!
extensions.ini
extensions.sqlite
extensions.sqlite-journal
And as i mentioned, i have the same anti virus on my laptop and desktop, but i have not any problem on laptop.

Do you have security software that acts like a sandbox or uses virtualization to restore files on a next boot?
See also:
*http://kb.mozillazine.org/Preferences_not_saved
*https://support.mozilla.org/kb/Preferences+are+not+saved
It is possible that there is a problem with the file(s) that store the extensions registry.
Delete the files extensions.* (e.g. extensions.sqlite, extensions.ini, extensions.cache) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
*https://support.mozilla.org/kb/Profiles
New files will be created when required.
See "Corrupt extension files":
*http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
*https://support.mozilla.org/kb/Unable+to+install+add-ons
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to do a compatibility check or see if there is a compatibility update available.

Run function every hour

Can anyone help? I need to be able to run a function every hour.
One way is:
javax.swing.Timer rateTimer=new javax.swing.Timer(3600000,new ActionListener(){
public void actionPerformed(ActionEvent evt){
// your code here
it there any other way or is this the best?

Should mention that if the timed service is the only thing the application is going to do (rather than many things) then you might want to look to your OS to see what scheduling services it already has. Then the OS could run your application once an hour.

Changing Automaticaly WPA key After/Every hours Airport / Widget

Hello all,
I was wondering if there is a way or an app that could change the WPA key (of Aitport) automatically, either at regular intervals or else.
Thanks

I'm not a wireless security expert, but I do read a bit. I guessing that you used a pretty weak password.
I don't know if what you propose is possible, but I suspect it's not in consumer level electronics. People who do security for a living don't find it 'tedious'. It's a fact of doing business. I don't see where it would be workable on a network with more than just a couple of devices. Recent history has shown that just about every wireless security method chosen will eventually get hacked. Wireless is insecure by nature and should not ever be used if a network must be 'secure'. Reference TJMaxx.
The acceptable risk factors can be adjusted for by taking the time to set up and use the highest levels available today on the consumer market, even if this means buying later model wireless equipment. At present, the best consumer level of wireless security is WPA2. I've still got clients running wireless wide open because they can't be bothered, or they are running WEP because that's the level on the router the phone company provided. Those are the targets for the War Drivers.
Since even WindowsXP with Service Pack 3 can now use WPA-AES, if the hardware supports it, then there is no valid reason not to upgrade your wireless hardware to that standard. The problems I run into is with clients who have to maintain lower standards for older equipment, then worry that they can be hacked. You don't get it both ways. If the old laptop can only do WEP which has been cracked since 2001 then chuck it or get a different wireless card for it.
Here is a related thread:
http://discussions.apple.com/thread.jspa?threadID=1852904
As a side note: every demonstration I've bothered to watch on YouTube that purports to having cracked WPA wireless is an exaggeration. There are methods available to see some of the data in the stream, and guess the rest, and then run a dictionary attack to eventually be able to login to an access point. When you use a 26 digit alphanumeric password, the time it takes to actually get the password becomes many years using several computers 24x7. The resources for this kind of hack wouldn't be cheap and probably not in your apartment building or on the neighborhood block (think governments). Running VPN deals with this pretty well - re-encrypt the data in the tunnel that's inside the encrypted connection.
Only the people who update their equipment, and their OS will have any sort of protection over time. People who don't become roadkill.

NTFS server keeps dies every hour.

I have iFS up and running on an NT 4.0 machine. I am using SMB for users to access their information.
(1) I would like to know why the NTFS server keeps dying after every hour or so.
(2) How I can avoid this from happening again.
Thanks.

You need to make sure first that if you have enough memory. See our installation guide for memory requirements. If you have your Database on the same machine as iFS, you need at least 512 MB of memory.
If the problem still exists, we need more information to diagnose what is wrong. Can you provide your NTFS log file?
null

Scheduler Runs Twise

Hi All,
I have created scheduler which executes one procedure daily at 8 pm.. Everything is very simple but the scheduler running twise every time. I am not getting why it happening.
Create script of the scheduler is :-
begin
DBMS_SCHEDULER.CREATE_JOB(
JOB_NAME           =>      'JOB_FOR_TRANSACTION',
JOB_TYPE           =>      'PLSQL_BLOCK',
JOB_ACTION         =>      'begin MIS_TRANSACTION; end;',
START_DATE         =>      SYSTIMESTAMP,
END_DATE           =>      NULL,
COMMENTS           =>      'JOB IS CREATED FOR TRANSACTION.',
ENABLED            =>      TRUE,
REPEAT_INTERVAL    =>      'freq=daily; byhour=20; byminute=0; bysecond=0;');
end;Will someone put some light on it.

Chanchal Wankhade wrote:
Hi All,
I have created scheduler which executes one procedure daily at 8 pm.. Everything is very simple but the scheduler running twise every time. I am not getting why it happening. post SQL & results that support the statement above.
How do I ask a question on the forums?
SQL and PL/SQL FAQ
>
Create script of the scheduler is :-
begin
DBMS_SCHEDULER.CREATE_JOB(
JOB_NAME           =>      'JOB_FOR_TRANSACTION',
JOB_TYPE           =>      'PLSQL_BLOCK',
JOB_ACTION         =>      'begin MIS_TRANSACTION; end;',
START_DATE         =>      SYSTIMESTAMP,
END_DATE           =>      NULL,
COMMENTS           =>      'JOB IS CREATED FOR TRANSACTION.',
ENABLED            =>      TRUE,
REPEAT_INTERVAL    =>      'freq=daily; byhour=20; byminute=0; bysecond=0;');
end;Will someone put some light on it.

How to schedule a Stored procedure to run every hour in SQL server express

Hi,
I am using SQL server express and I want to schedule a Stored procedure to run every hour.
The Stored Procedure name is UpdateData.
Can someone please give an example of how i can schedule this to run every hour, given that I do not have SQL Server agent on my express edition.

Hello,
You will find more options on the following thread.
http://stackoverflow.com/questions/1675206/how-to-run-a-stored-procedure-every-day-in-sql-server-express-edition
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

I want to schedule a dbms_job to run for every one hour

Hi Guys,
I want to schedule a dbms_job(in oracle 10g) to run for every one hour. Can any one provide some idea on this.
KLR

Thanks for your reply, but I am getting the error below
'ORA-06550: line 1, column 112:
PLS-00103: Encountered the symbol "END" when expecting one of the following:
:= . ( @ % ;
The symbol ";" was substituted for "END" to continue.
ORA-06512: at "SYS.DBMS_JOB", line 82
ORA-06512: at "SYS.DBMS_JOB", line 139
ORA-06512: at line 7'
can you please check this error and let me know how can I execute one package for every one hour and how to see whether the job is running every one hour or not.
Thanks in advance.
KLR.

ICal keeps sending email notifications from all agenda items from the last 2 years. After laptop start up this action is repeated every hour. How can I stop these 300 emails coming in every hour?

iCal keeps sending email notifications of all agenda items from the last 2 years (then I bought my laptop). After laptop start up this action is repeated every hour. How can I stop these >300 emails coming in every hour?

Hi,
We have rolled out a fix for this issue.
Please log off and log back in to your machine and the issue should be resolved automatically. In case that does not work, please manually run the msi installer posted here (may require reboot).
For details, please refer to the KB article here: Multiple RunOnce keys created 11.0.10 and 10.1.13 Acrobat | Reader
Please let us know if you still face any issues.
Thanks,
Ashu Mittal

Why is the purge command running every hour, and freezing my system?

I noticed over the past several days that my mac pro will freeze for several seconds (clock stops, mouse/keyboard don't work. completely frozen) every hour, to the minute.
I've tracked it down to the "purge" command, which is causing the problem. But, I can't find where it's being called. Any hints where I might look to find the cause?
I don't believe this was happening a few days ago. I have installed all software updates.
I'm running 10.7.5 on a 2x2.66Ghz 6-core mac pro.
Thanks!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). Post the lines of output (if any) that appear below what you just entered. You can do that by copying and pasting as well. Omit the final line ending in “$”. No typing is involved in this step.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time you'll be prompted for your login password, which you do have to type. It won't be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

How can I get Automator to run every hour

Hello,
I want to run a Unix Shell executable every hour (measuring network bandwidth), but automator only seems to be able to go down to once a day. Is there anyway of getting automator to run the executable every hour?

If you already have the shell script then skip Automator and use launchd(8) to run the script on what ever schedule you'd like.
There are many good tutorials and examples of using launchd see Creating Launch Daemons and Agents - Apple Developer and Mac OS X launchd examples for a start.
Also see http://launched.zerowidth.com/ as one way to automate making the plist file.
regards

Schedule run after every 2 hours

Similar Messages

Maybe you are looking for