Schedule WLAN configuration changes using CPI

I need to make some configuration changes to a WLAN on our controllers after hours, yet I cant figure out how to do it. The controllers are running v 7.3.101.0 (5508s & 2504s), CPI is version 1.3
When I go to Configure > Scheduled Configuration Tasks > WLAN Configuration I get the following message
No saved task exists. You can schedule WLAN task for required Controller from " Configure > Controllers > COntroller IP > WLANs > Wlan configuration" page.
When I go there I dont see any options to schedule a change. When I make configuration changes to a WLAN and click save I get a warning messages that leads me to believe that the changes will be effective immediately.
Am I missing something?

Please go to the below link and and see Configuring Scheduled Configuration Tasks. It will help you.
http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.3/configuration/guide/ctrlcfg.html#wp1098517

Similar Messages

How to set up 'Tansport Request' to move Configuration Change to Prod ?

I would like to know the steps to transport the Configuration Changes from Development to QA (or Production).
Thanks for your help.

Hi Oscar,
Request are of two types.
1.Customization Request.( functional Consultants)
2.Workbench Request( Abapers)
If you are doing any configuration change using you user id in Devlopment system.
1.while saving the changes it will ask for customizing Request, here you have to give the request and save the changes.
if you want to move the changes from Development System to Qualtity.
Goto Transaction SE09 or Se10 give your user id name then Click on Display
Here Go to your Request No.xxxxxxxx and Click the Tranfort Icon/Bus Icon or Press F9.then the changes will be moved to Quality System.
Please ensure that Task will be released first.
Hope this clarifies your doubts and Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Making a configuration change without using admin console

I am using the Platform Edition of App Server 7 so I don't have access to the web-based admin console.
I need to make a configuration change and the only directions I have are for the admin console.
Can anybody give me some pointers on what file to edit to acomplish the procedure below?
8. Log in to the Sun ONE Application Server administration console.
9. Select the application server Instance on which you installed the Identity Server.
10. Click JVM Settings and then JVM Options.
11. In the JVM Option field, enter the following string: -Dhttp.keepAlive=false
12. Click Add and then Save.

I think I've found it...
The file is server.xml and it is located at:
/var/opt/SUNWappserver7/domains/domain1/server1/config
There is a section under <java-config> with about 14 lines containing various <jvm-options>
I'll try adding this directive to the end of the <jvm-options> as follows:
<jvm-options>-Dhttp.keepAlive=false</jvm-options>

How to load the boot menu using the command line , after the configuration change ?

how to load the boot menu using the command line , after the configuration change ?

Hi @Bask-48
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp you are trying to change the boot order. Here is a link to Configuring the Boot Order in the System BIOS
that will assist you.
Good Luck and Happy Holidays!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

I have been using firefox for a long time, today when i tried to launch firefox i recieved "Firefox is configured to use a proxy server that is refusing connections." i dont know how to fix this. I didnt change any settings.

I have been using firefox for a long time, today when i tried to launch firefox i recieved "Firefox is configured to use a proxy server that is refusing connections." i dont know how to fix this. I didnt change any settings, im the only person who uses this computer

You can find the connection settings in Tools > Options > Advanced : Network : Connection 
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* [[Firefox cannot load websites but other programs can]]

I have Photoshop CS purchased many years ago for a LOT of money. Other day went to use it, got msg. "computer configuration changed, need to re-activate". Tried that for days, didn't work. Cannot call ANYONE to find out problem. Am not very computer l

I have Photoshop CS, purchased many years ago for a LOT of money. Other day went to use it, got msg. "computer configuration changed, need to re-activate. Tried that for days, didn't work. Cannot call ANYONE to find out problem. Am not very computer literate, so don't understand what that means. LOVE the CS program and know how to use it, so don't want to have to learn something new. Don't know what to do. Went to all the big name stores and no one can tell me anything, like what happened to CS or what is replacing it that is the same as CS. CAN SOMEONE PLEASE HELP!!!

jd49034389 wrote:
down further there is a Photoshop CS2, do I just do that one?
Yep. That's the one. Make sure to use the supplied key on the download page, not your old one.
Good luck.
--OB

Configuration changes needed or commands before using JRockit mission ctrl

What are the things I need to do before I start using jrockit mission control . I have configured weblogic server and used jrockit as my jvm. Now, I can start jrockit mission control by goint to : C:\Oracle\Middleware\jrockit_160_17_R28.0.0-679\bin\jrmc.exe but i do not see jrockit jvm and local jvms in my JVM browser. Do i need to do some extra configurations before using the tool?
Also, how do I see my ear files listed here so I can do application level monitoring too using the tool.
All help will be really appreciated !
Sid

Then you need to use the registry edit option:
use: regedit in the run option so that you can open the registry edit browser.
Then go to : My Computer --- HKEY_LOCAL_MACHINE----SYSTEM---- services ---- beasvc_weblogic_server
There will be services present with each weblogic server.
Within server name, go to the parameters option and there you can see the option: cmdline
You will have to edit the value of this cmdline.
Also before editing any values from the registry edit browser, make sure that the service is stopped first and then you should edit and save the values and then start the service.
Thanks,
Sandeep

How to prevent BGP code 6 (Cease) subcode 6 (Other Configuration Change)

Can anyone tell How to prevent BGP code 6 (Cease) subcode 6 (Other Configuration Change) ?
We are facing frequent problem with this error. Please suggest how to stop this....
Note :- We are using BGP VPN between this peers.
Logs :
Date/Time : 2015-04-30 00:49:40+05:30
State : Up
Date/Time : 2015-04-30 00:39:05+05:30
State : Down
Error Code : 6(CEASE)
Error Subcode : 6(Other Configuration Change)
Notification : Send Notification
Date/Time : 2015-04-29 18:22:11+05:30
State : Up
Date/Time : 2015-04-29 18:21:39+05:30
State : Down
Error Code : 6(CEASE)
Error Subcode : 6(Other Configuration Change)
Notification : Send Notification

on the same dates you mean the same request are posted in IT2001? ie both full days?
Please clarify
usually the Time collision checks are followed only via posting using report rptarqpost and not while applying through portal in ESS
This is very strange you indicate
SO you need to check the basic tables first
You may need to check the collision.
Collisions Tables V_T554Y and V_554Y_B reaction indicators.
and V_T508A
able T582A set to time constraint of "Z
In backend Pa30 collision works like this
1) the logical collision, checks if there is an overlap in the validity
interval of the IT´s (begda, endda).
2) the physical collision, checks if there is an overlap in the time
interval of the IT's.
In the logical collision it is checked if there is an overlap in the
validity interval if at least one of the records is a full-day
( that is the case when you enter a Daily Work Schedule (DWS) )
So when one of the records has a DWS it is considered to be a full day
record and the logical collision is taken into consideration.
If instead you enter the only the time interval manually the records
are considered to be partial-day and the physical collision is
performed. In that case only the time interval is important.
So if the clock times are not entered the physical collision can not
take place.
The collision functionality is always based on clock times and dates,
never on the total nr of hours.
Edited by: Siddharth Rajora on Sep 21, 2011 4:57 PM

How to connect to wlan with n97 using ca certifica...

Hi all I have been trying to get my wireless working on my N97 at work which uses WPA/WPA2 and after a week and lots configuration changes I finally got it working, So I thougt I will share this
Since my work WLAN uses EAP-PEAP I needed the root ca certificate which i got from my network team.
So the first thing I did was send the cert to my phone and saved it
   To do this I sent the cert to my phone eg E:downloads folder
   I then went to file manger and found the cert under E:download folder
   I doubled clicked the folder and was promted to save which I did
   The cert will be installed under Setting-->Phone-->Phone Mangement-->Security     Settings-->Certf mangement -->Authority certificate
Next you need to setup a new access point to do this i did:
go to Settings-->Connectivity-->Destinations-->Access point(add new)
you will then be promted to auto check to available access points which you will click yes
select the wlan you like to connect to and select internet
After doing the above go to Settings-->Connectivity-->Destinations-->Internet-->your wireless network ....open this to edit
Connection name -- leave defautl
Data bearer --leave default
Wlan Network name -- leave default
Network status -- leave default
Wlan network mode --leave default
WLAN security mode -- WPA/WPA2
Homepage --leave default
user access point --leave defualt
the only thing to change is WLAN security setting to do this
Double click WLAN security setting
WPA/WPA2 -- EAP
WPA2 only mode --off
Double click EAP plugin settings
enable EAP-PEAP
disable the rest
Double click EAP-PEAP to edit
Pesonal certificate ---Not defined
Authority certificate -- click and select the on you saved in the begining
User name in user -- user selected
User name -- your user name
Realm in use -- user selected
Realm -- your domain
TLS privacy --off
Allow PEAPv0 -- Yes
Allow PEAPv1 --no
Allow PEAPv2 --no
click right with the key pad or press the right arrow on top
enable EAP-MSCHAPv2 and disable the rest
Double click EAP-MSCHAPv2
User name -- you user name
Prompt passsword -- YES
Password -- you password
After this go back to Setting -->conectivity-->WLAN network
search for you WLAN select it and it should work..
this configuration worked for me

Hi guys, got some problems with my n97 and the eduroam eap-peap with mschap v2.
so we got this thing new in university, and i'm not able to connect to it.
all the iphone/windows guys just connect to the wlanpoint, accept the certificate, enter their userdata (without a realm ..) and its on. as we all know, its not that easy with symbian (and android) mobiles.
I allways find the eduroam with full signal strength, and add an accesspoint with the right settings.
I searched about an hour and i am sure i got the right settings.
Connection name -- blablabla
Data bearer --wlan
Wlan Network name -- eduroam
Network status -- open
Wlan network mode --infrastructure
WLAN security mode -- 802.1x
Double click WLAN security setting
WPA/WPA2 -- EAP
eap-only and at pos.1
Pesonal certificate ---Not defined
Authority certificate -- the certificate i downloaded from university (same as on IPhone, PC..)
User name in user -- user selected
User name -- eighter username@domain and blank realm or only username and domain in the realm field
Realm in use -- user selected
Realm -- see username
TLS privacy --off
Allow PEAPv0 -- Yes
Allow PEAPv1 --no
Allow PEAPv2 --no
enabled EAP-MSCHAPv2 and disabled the rest
User name -- you user name
Prompt passsword -- YES
Password -- you password
So i can't connect to it, i try to connect to it and after a while it wants me to put my username and passwort in it (when i use prompt password yes of course). i enter it, enter the password. after a while it asks me a second time.. after i do it again it says
EAP-PEAP Authentification failed
For me, as a technical interested guy, it seems to me, that the logininformation is not correct or not transfered correctly. Why else should it ask me a second time to input it.
But i tried all possibilities, even with other domains ... other possibility, that my account is banned is not possible because i tried it with an other one an it didnt work too.
I dont have a clue why this doesnt work.. as said before, i really tried every username possibility (leave it blank, with domain, without...)
thats what we got from the IT-Guys (some information):
http://www.hs-heilbronn.de/1401508/wlan_eduroam_en.pdf
It would be great if anyone got some help for me =)
btw: sorry for my english, i am german as you can imagine when you look at the pdf file

"configuration changed"

Hello,
I am getting strange emails when I know that nobody did not do anything with the router - WRVS4400N v2 with newest FW. I am sure because I am only one person who knows the password to the webinterface.
Long time ago I have turned on email norifications and I am getting info about dleting record in ARP table, initialization router and others.
But what is very strange for me from time to time I am getting information DATE 12:30:00 - Configuration changed!
What is impressive - router did not restart itself. And what is more impressive - time is always similar - please look - 12:30:01, 12:30:00
I have got more this messages earlier -
-below was exactly 7 days between notifications-
Mar 22 12:30:01 - Configuration changed!
Mar 15 12:30:01 - Configuration changed!
-below was exactly 7 days between notifications-
Mar 8 12:30:00 - Configuration changed!
Mar 1 12:30:00 - Configuration changed!
-below was exactly 7 days between notifications-
Feb 22 12:30:00 - Configuration changed!
Feb 15 12:30:00 - Configuration changed!
I am sure that any authorized person do not do anything with the router. I am only one person who knows password. I have changed this password long time ago by administration tab in the router web interfce. I have remote administration turned off.
Is it any other possibility to manage device? By ssh, telnet ? on which specific ports? Time suggests that this is not 'human modify', rather any script. I cannot disconnect router due to non-stop usage, so I have to ask you did you ever seen something similar.

Hi Miroslaw, thank you for using our forum, my name is Johnnatan I am part of the Small business Support Community. Do you have any configuration by schedule?Such an ACL or Internet Access Policy.?
It could be causing those logs, so you could check your firewalls and figure it out.
If the issue continues you could perform a factory reset and configure you device manually in order to avoid the same issue in the new configuration.
I hope you find this answer useful
“Please rate useful posts so other users can benefit from it”
Greetings,
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer.

Help me configure Change request management !!!

Dear friends,
I am Going to Configure Change request Management, so just to ensure that the configuration is not erronous, i would need Expert advise..
Just want to know Clear few things before i proceed..
I am also refering SPRO and related notes
Scenario :
I have two SYSTEMS SAP ECC 6.0 with System id R03 and Soluiton manager with SYSTEM id SOL,
R03 has 3 clients, 300 600 700..
In R03 300 is the development client, 600 is quality client, 700 is the production client.
SOL has 2 clients, 100, 200
With 200 as the production client.
Q.1) Do i have to configure CHARM in both the client (100 and 200 of SOLMAN).
Q.2) Initially I had tried to set CHARM in client 100 of solman, but later on realized that it has to be set up in client 200.
When i logon to client 200 and Execute IMG activity Spro-> sap soltion manger->basic settings-> sap solution manager system->activate integration with change request management.
Then by default it take the previous client ( client 100) as the change request management client.
( as we know there are three steps in the above activity ), the other activity are executed properly, only prblem being that the default client is always set to 100, which should not be the case).
I do get the prompt saying ( "The change request clent is set to clent 100, do u want to change to client 200, on clicking yes, still it is always set the same client 100 as charm client ")
Plz let me know what do i do to set the change request client to 200??
Q.3) Regarding TMS, we have local domain controller in solman and local domain in R3.
We are planing to establish domain links between the two systems( ie both the domain controllers) ??
Is this the right strategy ??
Any other method that u can recommend ??
Q.4)One of the IMG activity says, Generate Destinations to client 000 of all the domain controllers..
Whenever i do this these, destinations are created with errors, i am not able to create trusted RFC destinations without errors.
When i logon to satellite domain controler and excecute sm59 there are 2 destinations created Trusted and BACK.
These destinations works well,
but when i logon to Solman, got to sm59 , when i test the TMW and TRUSTED rfc destinations i test these destinations using Remote Logon i get error,
" no authorization to logon as trusted system"
I went thru one note which recomended Kernel upgrades to solve the problem,
I r3 my kernel relaese is 700 with patch level 56, the note recomends to apply patch 80, did u have these problems??
what is your kernel patch levels in sateliite and solman systems.
Q.5) TO be able to raise tickets from R3 to solman we create RFC destinations.
We also create RFC destinations to client 000 of all the sateliite system,
dont u think these RFC destinations might interfere with each other??
Q.6) Is there anyone who has successfully configured CHARM. Can you plz share the configuration documents with me..
Please note :
All the contributors would be handesomely rewarded with points .

Hi,
Check this
Note 128447 - Trusted/Trusting Systems
For your Q4.
Q3.)
Establishing Domain link - That's the right way. Go ahead.
These are the steps.
1.Define Transport Routes for System Landscape
assign exactly one development system to a production system, and that these two systems are connected by exactly one unique transport track. If a development system and a production system are connected by more than one transport track, this may lead to inconsistencies within the transport distribution. This type of transport configuration cannot be supported by Change Request Management, and may cause inconsistencies within the tools involved.
2. Activate Extended Transport Control
The CTC parameter should be '1'
3.Configure Transport Strategy
Deactivate the QA Approval.
4. Activate Trusted Services.
5.Activate Domain Links.
You have to activate domain link between systems.
6. Generate RFC Destinations to Client 000
Hope this helps.
feel free to revert back.
--Ragu

A new version of Firefox, which downloaded automatically, says Firefox is configured to use a proxy server that's refusing connections, even though I had access before the download.

I was using Firefox earlier in the day with no problem. About half an hour ago I tried to get on the Internet using Firefox (as always). When I did, I was greeted with a little dialog box showing that something was downloading. That's happened before.
This time, though, I was greeted by an error page that said Firefox was configured to use a proxy server that's refusing connections.
I'm not on a network. I have a desktop computer that connedts to a wireless modem that I share only with my wife. I didn't change my settings on either. Neither did my wife.
My "Connection Settings" box still says "use system proxy settings." There are no entries in the manual settings boxes.
I want to emphasize that I changed *nothing.*
I need to know, please, how I can set my computer to get back onto the Internet or, failing that, how I can go back to the previous version of Firefox.
Thank you very much.
Bob Murdich

You can find the connection settings in Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* [[Firefox cannot load websites but other programs can]]

For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
We are getting below error.
The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
COuld anyone please help us to know, How it can be resolved?
We also have this below error.
System Response
If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
Procedure
The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
Procedure for System Administration
Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
Additional Information:
System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
No authorization to log on as a trusted system (Tr usted RC=0).
/TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

Problem in configuring SSO using SAML for applications hosted on diff m/c

Hi Techies,
I am stuck in a weird problem for past month or so without any resolution. Not much help by googling. So I hope i get the answer from the mouth of the horses -
I am trying to use SSO using the sample application appA and appB as stated in the tutorial of SSO by BEA.
I am summarizing the problem below -
Steps followed for Configuring SSO using SAML
1. Created 2 domains on 2 seperate machines namely domainA and domainB
2. Source appliction is deployed on domainA and the target application is deployed on domaninB
The steps mentioned in the following tutorial has been followed-
http://dev2dev.bea.com/pub/a/2006/12/sso-with-saml.html
3. As mentioned in the tutorial the certificate is generated using keytool utility. The same certificate is copied
to WEBLOGIC_HOME/server/lib of destination machine.
4. The certificate was successfully registered on desitnation or host 2 but while activating the configuration
changes(SSL client Ientity Alias and SSL Client Identity Pass Phrase) for Federation services the following error
is thrown -
" SAMLBeanUpdateListener: SAMLKeyManager.prepareUpdate() failed with exception:
weblogic.descriptor.BeanUpdateRejectedException: SAML key Manage failed to validate key (SSL Client) configuration
in the FederationServicesMBean, key alias: testalias "
The interesting bit of the problem is that the same configuration works on 2 domains created on same machine. The
problem only occurs when domains are created on seperate machines.
Alterative to the problem: when the certificate is generated seperately for domainB and copied to
WEBLOGIC_HOME/server/lib, it works. However, the certificate generated in domainA should have been copied.
Note: I am using Weblogic portal 9.2.1
Any quick replies will be much appreciated. Thanks.
Edited by saurabh.agrawal at 02/06/2008 2:01 PM

Hi François,
You are right about the use of the NameID format. But the issue here is/was that OIF at SP is integrated with OAM, and the authenticated user at OIF-SP and OAM will be the Anonymous user rather than the user who was identified at the IdP even though the remaining attributes sent are for the IdP user. I think these attributes can be used by with OAM for authorization using custom authorization plug-ins but haven't tried that one out.
As for the attribute sharing profile, it's this one - http://www.oasis-open.org/committees/download.php/18058/sstc-saml-x509-authn-attrib-profile-cd-02.pdf, although for the life of me, I cannot remember why I suggested this in the first place!
-Vinod

Scheduling Agreements and relevant schedule lines configuration !

Dear Sapients,
I request you all to help me in providing the configuration steps for Scheduling Agreements and relevant Schedule lines configuration.
Its urgent please help me !!
Regards,
Sreedhar.
kodalisreedhar----
com

Hi Sreedhar,
Scheduling Agreement with Delivery Schedules
Definition
An outline agreement that is created for one or more materials and outlines the overall expected quantity of the material(s) to be delivered to the customer over a specific period of time.
Use
The scheduling agreement is used as a basis for delivering a material. The customer sends in scheduling agreement releases, referred to as delivery schedules, at regular intervals to release a quantity of the material.
Structure
The structure of scheduling agreements with delivery schedules resemble that of other sales documents in the R/3 System, in particular the standard scheduling agreement.
Data that applies to the entire document appears in the header; data about materials appears at item level; and delivery dates and quantities appear in the schedule lines within the delivery schedule. Additionally, the system maintains a history that permits you to compare and contrast various generations of delivery schedules.
Integration
Data in scheduling agreements comes from three sources:
The customer sends in requested quantities and dates, normally by Electronic Data Interchange (EDI)
The component supplier enters data manually
The system automatically copies data into the scheduling agreement from master records
Please go through the below link for further information
http://help.sap.com/saphelp_47x200/helpdata/en/93/7439fb546011d1a7020000e829fd11/frameset.htm.
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Schedule WLAN configuration changes using CPI

Similar Messages

Maybe you are looking for