Scheduled background job for FBV0 transaction is not working.

Hi All,
We have impleted OSS note 971193. This is program which deletes parked documents in the system and it behaves good when we run in the foreground and doesn't work when it is scheduled in background. I debugged background job which is scheduled and program fails after call transaction. I get this following error "Error in Document Deletion. Runtime error RAISE_EXCEPTION has occurred".
Can anyone please help me if you have any info on this or if you see similar kind of problem.
Thanks in Advance.
Regards,
M

any idea ?

Similar Messages

Error in Schedule Background Job for Deadline Monitoring of swu3

While Auto Customization swu3 i am getting error message 'Output device "" not known' in 'Schedule Background Job for Deadline Monitoring'
Please advice what could be cause of it

the earlier problem of background job was solved by changing the output device assigned to user wf-batch .
regarding the transport request :
when i was trying to execute the step : "Schedule bakgrd for missed deadlines " MANUEL it was giving me an option of SAVE AND SCHEDULE . which was creating the transport request . but when i executed it automatically it worked fine without asking a request to me ... i don't know why )-: ... probablly we can specify a different interval then the standard of three minutes and which will be transported (it's just a guess) . i have executed it automatically ...
well thanks all for u r help

Automatic workflow customizing :Schedule background job for condition evalu

Hai,
I have one problem in automatic customizing SWU3(Maintain runtime environment)-Schedule background job for condition evaluation.
How to turn green tick from red cross? All other steps are OK in SWU3 except this problem.
Please give me some tips.
-Jaheer
_______Thanks in terms of BIG points_______________________

Hi Jaheer
If the only red cross is next to the condition evaluation job, I suppose you could just schedule up the job automatically in SM36. Just be sure that the RFC Destination is correctly configured.
The program that you need to schedule is <b>RSWWCOND</b>. The SAP default is to call the job SWWCOND and schedule it to run every 30min. That should get rid of the red cross. And if not, you might find along the way why the Auto-Customising didn't work.
Cheers
Lyal

How to deactivate *Schedule Background Job for Work Items with Errors* SWU3

Hello Guys,
Can any one tell me how do I DEACTIVATE Schedule Background Job for Work Items with Errors in sap workflow SWU3.
Currently it is green which I don't want. I want to stop this service.
Regards
NK

Hello,
You could also just stop the job in tx SM37.
But why would you want to do this? As a test?
regards
Rick Bakker
hanabi technology

How to create a background job for call transaction

hi gurus
can any one suggest me
how to create the background job for call transaction.
thank you
regards
kals.

Hi,
Refer
https://forums.sdn.sap.com/click.jspa?searchID=10926107&messageID=889652
Regards
Kiran Sure

Issue in background job for call transaction

Dear All,
I am facing a strange issue with call transaction. I need to add some Purchase requisitons in the APO using Call transactionmethod. It is working fine In All screen mode and No Screen Mode. But when I schedule the program in BAckground processing it is not wokring fine. It is not creating any Purchase requisitioins. When I debug the background Job it is creating Purchase requisitions.
Please find the code below
    DATA: l_wa_params TYPE ctu_params.
    l_wa_params-dismode = l_c_mode.
    l_wa_params-updmode = 'A'.
    l_wa_params-defsize = 'X'.
    l_wa_params-racommit = 'X'.
    CALL TRANSACTION '/SAPAPO/RRP3' USING fp_i_bdcdata OPTIONS FROM l_wa_params
                                        MESSAGES INTO l_i_bdcmsgcoll.

Hi,
I have exactly the same problem with transaction /SAPAPO/RRP5.
Thanks in advance for your help,
Yannick CAREL

Error while scheduling Background Job for User/Role Full Synchronization

Hi all,
We have installed RAR 5.3 Component and uploaded the authorization data & established the connectors to the backend system.
We have performed all the post installation activities and everything is complete.
When we have scheduled User -Full Synchronization with the Back End system as a part of Post Installation Activity we are receiving the below error message
"Error while executing the Job:Cannot assign an empty string to host variable 2."
Also the VIEW LOG/ Terminate Job buttons are disabled in this screen.
Can somebody please help us in resolving the above issue
Thanks and Best Regards,
Srihari.K

Hi,
We are copy pasting the error log (Part as it is huge) below here. We could able to do Full Synch for Roles and also for Profiles. Only for User Synch we are getting this error and none of the users are sychronized to RAR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: Update user WILSONA of HL2-QAHR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: Update user WINDC of HL2-QAHR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: Update user WLADICHJ of HL2-QAHR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: Update user WUK of HL2-QAHR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: Update user ZENGS of HL2-QAHR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: Update user ZHENGL of HL2-QAHR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: All System Flag:false=====Last Batch Flag:true
Jan 13, 2009 12:34:27 AM com.virsa.cc.xsys.bg.BatchRiskAnalysis loadUserData
INFO: @@@ User sync completed for params true: Syskey List is [HL2-QAHR]
Jan 13, 2009 12:34:27 AM com.virsa.cc.xsys.bg.BgJob run
WARNING: *** Job Exception: Cannot assign an empty string to host variable 2.
com.sap.sql.log.OpenSQLException: Cannot assign an empty string to host variable 2.
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:85)
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:124)
     at com.sap.sql.types.VarcharResultColumn.setString(VarcharResultColumn.java:57)
     at com.sap.sql.jdbc.common.CommonPreparedStatement.setString(CommonPreparedStatement.java:511)
     at com.sap.engine.services.dbpool.wrappers.PreparedStatementWrapper.setString(PreparedStatementWrapper.java:355)
     at com.virsa.cscext.dao.CSCDAO.updateIgnoredUserData(CSCDAO.java:1388)
     at com.virsa.cscext.dao.CSCDAO.populateGenObjUser(CSCDAO.java:1169)
     at com.virsa.cc.xsys.bg.BatchRiskAnalysis.populateGenObj(BatchRiskAnalysis.java:868)
     at com.virsa.cc.xsys.bg.BatchRiskAnalysis.insertBAPIUserData(BatchRiskAnalysis.java:142)
     at com.virsa.cc.xsys.bg.BatchRiskAnalysis.loadUserData(BatchRiskAnalysis.java:390)
     at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchSyncAndAnalysis(BatchRiskAnalysis.java:1275)
     at com.virsa.cc.xsys.bg.BgJob.runJob(BgJob.java:402)
     at com.virsa.cc.xsys.bg.BgJob.run(BgJob.java:264)
     at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.scheduleJob(AnalysisDaemonBgJob.java:240)
     at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.start(AnalysisDaemonBgJob.java:80)
     at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:436)
     at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1225)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
     at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:481)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:319)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Jan 13, 2009 12:34:27 AM com.virsa.cc.xsys.bg.BgJob setStatus
INFO: Job ID: 13 Status: Error
Jan 13, 2009 12:34:27 AM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
2@@Msg is Error while executing the Job:Cannot assign an empty string to host variable 2.
Jan 13, 2009 12:34:27 AM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO: -
Background Job History: job id=13, status=2, message=Error while executing the Job:Cannot assign an empty string to host variable 2.
Jan 13, 2009 12:34:27 AM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
INFO: -
Complted Job =>13----
Please let us know how to resolve this error
Thanks and Best Regards,
Srihari.K

Page-break in alv background job for alv output variant not coming correctl

Hi,
I have created an ALV grid report. When i run the report in background i get the output with correct page-break on FIELD1. Now when i run the report in background with an "ALV output variant" (its the ALV variant that controls the fields display in the output; this is not the program variant), i do not get the page-break on FIELD1. I have already build the sort criteria and using:
gs_sort-group = '* '.     "New-Page
Please let me know what could be reason for not getting the page-break in background when i am using the alv output variant and how do i correct this problem.
Regards,
Rakesh

Hello Everyone,
I have solved the problem. While running the program in background, we get the page-breaks when we use the below part of code in the sort catalogue with the condition that the program variant should not use any ALV layout variant.
gs_sort-group = '* '.     "New-Page
If you are using the ALV layout variant in the program variant then we can check the ROWPOS, COLPOS, and NO_OUT for that ALV layout variant and pass them along in the fieldcatalog table. You should be careful with not to pass the layout variant in the DISVARIANT. You can notice that i have cleared it and simply passing the program name into that.
*C-- Process separately for jobs running in Background. Actually
*C-- sortcat-group solves the problem only in Foreground. In background
*C-- when ALV layout variant is not selected then it works otherwise it
*C-- fails. So for background jobs we are reading the fieldcat and then
*C-- passing the same in the display FM.
IF sy-batch = 'X'.
    CALL FUNCTION 'REUSE_ALV_VARIANT_SELECT'
      EXPORTING
       i_dialog                  = ' '
       i_user_specific           = ' '
       i_default                 = ' '
*   I_TABNAME_HEADER          =
*   I_TABNAME_ITEM            =
        it_default_fieldcat       = gt_fieldcat
        i_layout                  = gs_layout
*   I_BYPASSING_BUFFER        =
*   I_BUFFER_ACTIVE           =
     IMPORTING
*   E_EXIT                    =
       et_fieldcat               = lt_fieldcat
*     et_sort                   = gt_sort[]
*   ET_FILTER                 =
*     es_layout                 = gs_layout
     CHANGING
       cs_variant                = gs_disvariant
     EXCEPTIONS
       wrong_input               = 1
       fc_not_complete           = 2
       not_found                 = 3
       program_error             = 4
       OTHERS                    = 5
    IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CLEAR gs_fieldcat.
    LOOP AT gt_fieldcat INTO gs_fieldcat.
*C-- Transfer all position changes to gt_fieldcat from lt_fieldcat
      CLEAR ls_fieldcat.
      READ TABLE lt_fieldcat
            INTO ls_fieldcat
            WITH KEY fieldname = gs_fieldcat-fieldname.
      IF sy-subrc = 0.
        gs_fieldcat-row_pos = ls_fieldcat-row_pos.
        gs_fieldcat-col_pos = ls_fieldcat-col_pos.
        gs_fieldcat-no_out = ls_fieldcat-no_out.
        MODIFY gt_fieldcat FROM gs_fieldcat INDEX sy-tabix.
        CLEAR gs_fieldcat.
      ENDIF.
    ENDLOOP.
*C-- Clear the disvariant for the background job as it contains the ALV
*C-- layout varinat
    CLEAR gs_disvariant.
    gs_disvariant-report = 'ZGPPMP0001'.
Then pass gt_fieldcat to 'REUSE_ALV_GRID_DISPLAY'.
The reason i'm doing it this way is that when we pass the layout variant name, the contents in gt_fieldcat were getting modified.
One more thing i'd like to point out is that that, i tried to delete the fields with no_out = 'x'. Now when i ran the program in background with all the fields in sort catalog (suppose there are 2 fields field1 and field2) also in fieldcatalog it ran fine. In the next run in background i removed one of the fields in sort catalog from the fieldcatalog (delete the fields with no_out = 'x') and i got dump. Basically i had hidden field1 and so the code which was deleting fields with no_out = 'x' deleted this field from gt_fieldcat. So basically we should not delete fields with no_out = 'x'.
I was getting ABAP runtime errors    MESSAGE_TYPE_X in the following part of the standard code.
000310     LOOP AT CT_SORT INTO LS_SORT.
000320
000330       READ TABLE IT_FIELDCAT ASSIGNING <LS_FIELDCAT>
000340            WITH KEY FIELDNAME = LS_SORT-FIELDNAME BINARY SEARCH.
000350       IF SY-SUBRC NE 0.
     >         MESSAGE X000(0K).
000370       ENDIF.
000380
000390       LS_SORT-SELTEXT = <LS_FIELDCAT>-SELTEXT.
i have just mentioned this part because when i checked the forum many people were getting such errors "MESSAGE_TYPE_X". This could also be one of the reasons.

Schedule background job for working days

Hi,
I would like to schedule a background job, but only runs on working days (from Monday to Friday), I am wondering whether it is possible to run as mentioned or not?
Kindly advise!
Thanks!!
br,
hy

hi
F9 - > click date/time, after the at operation mode tab, there is an arrow mark, click it, in taht mention your factory calendar id (which includes public holidays and specify from which workday it should start, time), then check and come back to the main screen, check periodic job, click the periodic values tab, in that specify it as daily...will solve your requirement
if helpful, reward
Sathish. R

BPM - Background Job for Reorganization = Not Scheduled

Good afternoon, first of all thank you very much for the support they can provide. I have developed a JDBC interface -> BPM (Multimapping) which works well. Modify a Message Mapping in the BPM that I use for an RFC Lookup, I have added the Configurable Parameters in the BPM and Integration Directory and everything works fine at design time. But when running the interface at run time the message reaches the BPM and the error "error in BPE inbound Permanent processing".
I have reviewed the Business Process Engine in the RWB and the item is Red Schedule Background Job for Reorganization and detail reads: "Background Job for Reorganization = Not Scheduled".
As I can solve this problem. Thank you very much.

Re: Importing trans request failed
Re: Transports Erroring
Re: What is RDDIMPDP .....
have a look it may help you
Message was edited by:
Vinod Udapudi
Message was edited by:
Vinod Udapudi

Schedule a job for traansaction code not for program

Hi All,
I have a TR Code for aprogram with a screen (not selection screen, not an executable program)
Can we schedule a job for SAP TR Code (not for program name);
Can you confirm this please
Iver

Dear Iver,
You intend to execute that SAP Trxn code in background. You cannot schedule a job. Did you think in background who will populate the values in the screen?
Alternatively, you can create a BDC program & schedule that program.
BR,
Suhas

Schedule Background Job : Remove delivery Block in Sales order

Hi Gurus,
I have a requirement to select all sales orders as per a condition and remove delivery block at
VA02-> Go to -> Header -> Status
For that I have to write a program which will be run only in background and i have to schedule background job for the same.
I have a parameter at selection - No of records
If no of records = 500 , I have to submit 500 jobs ie one job each for each sales order for removing delivery block.
I need to know
1) Which function module/bapi I can use to remove delivery block at sales order header level.
For blocked delivery the status is 'BSTK" . to remove block i need to change status to "RSTK".
2) How to schedule a background job for my program and how to submit one job each for each sales order.
Regards
Avi.

Hi Avi,
Would like to seek for your advice. I am facing the same scenario too which is to delete the delivery block but is deletion of the delivery block is done in the user exit MV45AFZZ. The subroutine which needs to have the extra logic of deleting the delivery block is USEREXIT_SAVE_DOCUMENT_PREPARE.
Need your advice on how do you solve this scenario? Thanks in advance.

Scheduling a Background Job for PM/CO Settlements (KO8G)

Hi All,
I've created variants for settlements of PM & CO orders using transaction KO8G. Now I want to schedule a background job using TCode SM36. What program name/ABAP name should I use for settlements when scheduling background jobs?
Regards,
Tso

Hello Tso,
Try transaction SCMO which provides you the option to set
the start date to finish date and can also set the start time and
finish time and allows you to specify the variant to be used.
When in transaction KO8G fill out the fields as you wish them for
the background job and then same the selection as a variant. There is
an option to have the variant for background jobs and save the variant
then you can specify this variant in the SCMO screen.
SCMO is the sceduele manager which will allow you to scehedule many
jobs as necessary.
Some notes:
332149 SCMA: Required workflow settings
325118 Schedule Manager: link customer-specific reports
317601 Schedule Manager: Customer reports for multilevel worklist
332149 SCMA: Required workflow settings
891042 SCHEDMAN: Automatic start of several flow definitions
I hope this helps.
Regards,
Lucas

BackGround Job for Transaction VF06

Hi Experts,
We are having problems with the background Job for transaction VF06. We run this job every day except weekends but this job runs and takes only 0 sec without creating Invoices.
Allthough running this transaction Manually creates Invoice with same variant.
Kindly help me on this.
Thanks and Regards,
Neha Kapoor

Hi,
I have the seen the Log it tells:
Date       Time     Message text                                                                 Message class Message no. Message type
29.06.2008 22:00:48 Job started                                                                       00           516          S
29.06.2008 22:00:48 Step 001 started (program RV60SBAT, variant SOIE AUTO BILL, user ID GGBATCH)      00           550          S
29.06.2008 22:00:48 Job finished                                                                      00           517          S
But Invoices are not getting created.
Thanks and Regards,
Neha Kapoor

Schedule a background job for a program using ABAP code.

Hi,
I have to write a program to schedule a background job for another program.
Need your help to understand how we can achieve this functionality.Any example of an abap code would be of great help.
Need it urgently.
Thanks in advance.
Sandeep.

Hi Sandeep,
Here is the demo program regarding the BDC For the background job.
report zprprbdc1
       no standard page heading line-size 255.
include bdcrecx1.
parameters: dataset(132) lower case.
***    DO NOT CHANGE - the generated data section - DO NOT CHANGE    ***
*   If it is nessesary to change the data section use the rules:
*   1.) Each definition of a field exists of two lines
*   2.) The first line shows exactly the comment
*       '* data element: ' followed with the data element
*       which describes the field.
*       If you don't have a data element use the
*       comment without a data element name
*   3.) The second line shows the fieldname of the
*       structure, the fieldname must consist of
*       a fieldname and optional the character '_' and
*       three numbers and the field length in brackets
*   4.) Each field must be type C.
*** Generated data section with specific formatting - DO NOT CHANGE ***
***data: begin of itab occurs 0 ,
***       matnr(20) type c,
***       mbrsh(30) type c,
***       mtart(30) type c,
***       kzsel(20) type c,
***       maktx(40) type c,
***       meins(5) type c,
***       end of itab.
data: begin of record occurs 0,
* data element: MATNR
        matnr_001(018),
* data element: MBRSH
        mbrsh_002(001),
* data element: MTART
        mtart_003(004),
* data element: XFELD
        kzsel_01_004(001),
* data element: MAKTX
        maktx_005(040),
* data element: MEINS
        meins_006(003),
* data element: MTPOS_MARA
        mtpos_mara_007(004),
      end of record.
*** End generated data section ***
start-of-selection.
*perform open_dataset using dataset.
perform open_group.
**do.
**read dataset dataset into record.
**if sy-subrc <> 0. exit. endif.
call function 'GUI_UPLOAD'
exporting
    filename                      = 'c:\jitu\bdc\10002.txt'
   filetype                      = 'ASC'
   has_field_separator           = 'x'
*   HEADER_LENGTH                 = 0
*   READ_BY_LINE                  = 'X'
*   DAT_MODE                      = ' '
*   CODEPAGE                      = ' '
*   IGNORE_CERR                   = ABAP_TRUE
*   REPLACEMENT                   = '#'
*   CHECK_BOM                     = ' '
*   VIRUS_SCAN_PROFILE            =
*   NO_AUTH_CHECK                 = ' '
* IMPORTING
*   FILELENGTH                    =
*   HEADER                        =
tables
    data_tab                      = record
* EXCEPTIONS
*   FILE_OPEN_ERROR               = 1
*   FILE_READ_ERROR               = 2
*   NO_BATCH                      = 3
*   GUI_REFUSE_FILETRANSFER       = 4
*   INVALID_TYPE                  = 5
*   NO_AUTHORITY                  = 6
*   UNKNOWN_ERROR                 = 7
*   BAD_DATA_FORMAT               = 8
*   HEADER_NOT_ALLOWED            = 9
*   SEPARATOR_NOT_ALLOWED         = 10
*   HEADER_TOO_LONG               = 11
*   UNKNOWN_DP_ERROR              = 12
*   ACCESS_DENIED                 = 13
*   DP_OUT_OF_MEMORY              = 14
*   DISK_FULL                     = 15
*   DP_TIMEOUT                    = 16
*   OTHERS                        = 17
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
loop at record .
perform bdc_dynpro      using 'SAPLMGMM' '0060'.
perform bdc_field       using 'BDC_CURSOR'
                              'RMMG1-MATNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RMMG1-MATNR'
                              record-matnr_001.
perform bdc_field       using 'RMMG1-MBRSH'
                              record-mbrsh_002.
perform bdc_field       using 'RMMG1-MTART'
                              record-mtart_003.
perform bdc_dynpro      using 'SAPLMGMM' '0070'.
perform bdc_field       using 'BDC_CURSOR'
                              'MSICHTAUSW-DYTXT(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(01)'
                              record-kzsel_01_004.
perform bdc_dynpro      using 'SAPLMGMM' '4004'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BU'.
perform bdc_field       using 'MAKT-MAKTX'
                              record-maktx_005.
perform bdc_field       using 'BDC_CURSOR'
                              'MARA-MEINS'.
perform bdc_field       using 'MARA-MEINS'
                              record-meins_006.
perform bdc_field       using 'MARA-MTPOS_MARA'
                              record-mtpos_mara_007.
perform bdc_transaction using 'MM01'.
**enddo.
endloop.
perform close_group.
*perform close_dataset using dataset.
&*****************Reward point if helpful************&

Scheduled background job for FBV0 transaction is not working.

Similar Messages

Maybe you are looking for