Scheduled backups don't start.

I have to launch them manually.
What can I do?
Thank you!

A bit more details would definitely help.
What happens? Is there an error?
Does anything appear in /Applications/Utilities/Console.app>"All Messages"?
What format is the disk (select it and press ⌘+I). What partition table? (check by opening /Applications/Utilities/Disk Utility.app, selecting the disk that has a manufacturer's name and size, and looking in the bottom right.)
Report back those details, and then we'll be able to help you.
Good luck!
Message was edited by: joshz

Similar Messages

Sdccn - scheduled jobs don't start

i have scheduled several tasks in the sdccn. but there don't start at the scheduled timed.
is there a backup tasks which must run?

André Smoktun wrote:
> i have scheduled several tasks in the sdccn. but there don't start at the scheduled timed.
> is there a backup tasks which must run?
Check in SM37, whether the task processor job is executed successfully periodically (every hour).
This job executes all tasks, which are due.
Job name /BDL/TASK_PROCESSOR
corresponing report: /BDL/TASK_SCHEDULER
Check scheduling via SDCCN, Settings -> Task processor.
Best regards,
Ruediger

Schedule job don't start

Hi Gurus, for last 2 days, no Jobs are being started in my BI system.
Whenever I schedule or start any job.. it says job started..
But when I check in SM37, I find the start column empty. And the delay(secs) column has the number of seconds increasing.
It goes 500 or even more.. The job actually never get started.
What might be the problem ??
Is it regarding any space issue ?
Have anyone of you faced this problem ?
Please help, Akash

Not sure what those jobs are
You can actually do "Cancel Without Core" but better talk to BASIS and figure out whats happening.

Windows Server Backup scheduled task run successfully but backup do not start (not running) on Windows Server 2012

Hi,
A backup job has been setup on Windows Server 2012 (Platform: Win32NT; ServicePack: ; Version: 6.2.9200.0; VersionString : Microsoft Windows NT 6.2.9200.0) via Windows Backup Software UI (Local Backup 1.0).
It is appearing as a scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup" belonging to user 'nt authority\system' in task scheduler.
The problem is that the Backup job never start despite the scheduled task running and completing successfully (when run automatically or manually)!
Would you be able to explain why and assist in resolving that issue?
Here is what we know:
When the backup is run manually via the Windows Backup Software UI, it works fine.
When the backup is run via command line (as set in schedule task) in a cmd command prompt (as local/domain 'administrator' or as 'nt authority\system' which is possible by running command prompt via 'PsExec.exe -i -s cmd'), something like "%windir%\System32\wbadmin.exe
start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet", it works fine.
If you manually run the preset scheduled task while logged in as administrator, the task run and complete successfully but the backup job does not start.
Idem if you schedule task is run automatically at scheduled time.
The schedule task run and complete successfully but the backup job does not start.
It is confirmed by running the following in a command prompt as 'nt authority\system':
schtasks /run /tn "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup"
SUCCESS: Attempted to run the scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup".
Despite success result, the Backup job does not start running...
No errors or warning appears anywhere in Event Logs (Microsoft > Windows > Backup or Task Scheduler) nor in the scheduled task History tab. The schedule task complete successfully but no Backup job is run...
If scheduled task automatically set by Windows Backup software is duplicated (copied) and set manually it runs fine as 'administrator' and as 'nt authority\system' (subject that 'nt authority\system' is added to the 'Backup Operators' AD group).
Here is an export of the current pre-set schedule task, is there any settings that need to be changed to make it works?
<?xml version="1.0" encoding="UTF-16"?>
<Task version="1.4" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
    <Author>MYDOMAIN\SERVER1</Author>
    <SecurityDescriptor>D:AR(A;OICI;GA;;;BA)(A;OICI;GR;;;BO)</SecurityDescriptor>
</RegistrationInfo>
<Triggers>
    <CalendarTrigger id="Trigger 1">
      <StartBoundary>2014-07-14T21:00:00</StartBoundary>
      <Enabled>true</Enabled>
      <ScheduleByDay>
        <DaysInterval>1</DaysInterval>
      </ScheduleByDay>
    </CalendarTrigger>
</Triggers>
<Principals>
    <Principal id="Author">
      <UserId>S-1-5-18</UserId>
      <RunLevel>HighestAvailable</RunLevel>
    </Principal>
</Principals>
<Settings>
    <MultipleInstancesPolicy>Parallel</MultipleInstancesPolicy>
    <DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
    <StopIfGoingOnBatteries>false</StopIfGoingOnBatteries>
    <AllowHardTerminate>true</AllowHardTerminate>
    <StartWhenAvailable>true</StartWhenAvailable>
    <RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
    <IdleSettings>
      <StopOnIdleEnd>false</StopOnIdleEnd>
      <RestartOnIdle>false</RestartOnIdle>
    </IdleSettings>
    <AllowStartOnDemand>true</AllowStartOnDemand>
    <Enabled>true</Enabled>
    <Hidden>false</Hidden>
    <RunOnlyIfIdle>false</RunOnlyIfIdle>
    <DisallowStartOnRemoteAppSession>false</DisallowStartOnRemoteAppSession>
    <UseUnifiedSchedulingEngine>false</UseUnifiedSchedulingEngine>
    <WakeToRun>false</WakeToRun>
    <ExecutionTimeLimit>P3D</ExecutionTimeLimit>
    <Priority>7</Priority>
</Settings>
<Actions Context="Author">
    <Exec>
      <Command>%windir%\System32\wbadmin.exe</Command>
      <Arguments>start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet</Arguments>
    </Exec>
</Actions>
</Task>
Thank you in advance for your feedback.

Once again, the issue is not to run the backup manually from the command line but to have it run via the scheduled task setup by the Windows Backup software.
By default, the schedule task is to be run as NT Authority\System, and when run under this account, the backup does not start (even though account is member of Backup Operators) and job can manually be run via elevated command prompt. This is not a normal
behavior and constitute a major bug in Windows Server 2012.
From my understanding the NT Authority\System account is a built-in account from Windows that should by default be part of the Administrators group (built-in) even though it does not explicitly appears like it in AD by default.
This account shall have by default Administrators rights and Backup Operators rights (via the Administrators group) without being explicitly added to those groups (http://msdn.microsoft.com/en-gb/library/windows/desktop/ms684190%28v=vs.85%29.aspx). By design
it is supposed to be the most powerful account which has unrestricted access to all local system resources. If that is not the case (as it seems) then this would constitute a major bug in Windows Server 2012 edition.
As said previously and as you confirmed, currently by default NT Authority\System on Windows 2012 server cannot start backup manually via an elevated command prompt unless it is manually added to Backup Operators (or Administrators) group. But wouldn't that
constitute a bug of Windows Server 2012?
Our server has not yet been restarted since I added NT Authority\System account to the Administrators group explicitly manually so I cannot yet confirmed it would sort the issue. Indeed it is heavily in use so cannot easily be restarted. Will confirm when
done.
We also have an additional problem where after a while of last reboot, part of the Exchange ECP can no longer be properly loaded in the web browser due to compilation error (compilation is done via NT Authority\System account which seems to no longer have
sufficient right to compile .NET code). What is strange is that it works at first and then stop working at some point... I am hopeful that adding NT Authority\System to the Administrators group would sort this issue as well but once again, that shall not be
needed!!!
Could a Windows Server 2012 update introduced some security policy changes or else that prevent NT Authority\System to have full power?

Scheduling backups when wake from sleep is password protected

i'm just wondering if it's possible to wake a mac from sleep (at say 0200) in order to run a backup script, if a password is required to wake from sleep/screensaver ?
what's happening at the moment is that the computer wakes, the script starts to run, but then after about 1 minute, because the authentication dialog is not processed, it goes back to sleep, so interrupting the script
i had the same problem trying to sftp into a mac after using wake-on-lan to wake it from sleep remotely. i can successfully make the sftp connection and start file transfers, however it quickly goes back to sleep (as the authentication dialog is unanswered)
so does anyone know of a way to keep the security of require-password-from-sleep, as well as allowing useful things like running scheduled backup scripts ?
Powerbook Mac OS X (10.4.7)

I also had this problem and I worked with Apple Care. They are aware of the problem and apparently are working on a fix. The only way around this for now is to uncheck the option requiring a password to wake from sleep/screen saver in System Preferences/Security. I was amazed to find this problem, I can't believe Apple let this one past them because surely all those folks who use Backup with .Mac accounts have experienced this problem or don't realize their backup isn't happening. So, hopefully this is one item that will be fixed at some point.

My blackberry 9810 don't start

my torch 9810 don't start up. yesterday i send a bbm, and 30 minute later, when i look on my torch, it's just a black screen with red light blink, 25sec on and wait 1 minutes for other red blink
i call my phone provider and try
remove battery wait 10
plug on computer
remove battery and plug on computer
start blackberry software and software don't find anything like no phone
i xchange my battery between my two blackberry torch and my good one continu to work good and the bad one continu to red blink
my phone provider tell me that i need to buy a new one,
someone have a other solution ?

Hello!
From what you describe, I think you may have done these things, but I cannot tell for sure...
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain connected to a known-good wall charger (not PC USB):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain a known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem.
If it is your BB, these processes may help:
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
http://www.blackberryfaq.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
super666 wrote:
my phone provider tell me that i need to buy a new one,
Of course, if that is true, then there's nothing that can be done. Indeed, it's impossible to accurately diagnose a hardware level issue at this internet-distance.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Sleep, Passwords, and Scheduled Backups

Okay, I have a question that I've yet to find an answer to (and I've looked high and low). I would think it would be a common issue, but perhaps not.
I downloaded Deja Vu a few days ago to schedule backups for my computer. Ideally I'd like them to run at like 5am when I'm not near my computer. So far so good. The problem is that I would like my computer passworded, and there lies the trouble.
Ideally it would be nice if I could set it to sleep for the night, go to bed, schedule it to wakeup at 4:59am, start Deja Vu at 5am, make the backup and go back to sleep. The problem with that is that I originally had it set to ask for a password when coming out of sleep or a screen saver- when that's on and it comes on a scheduled wakeup, it prompts for password for 10-20 seconds, sees no password and goes back to sleep, bypassing my backup. Obviously that's not what I need.
I then thought, hey, that's fine, I guess I could just unpassword the sleep/screen saver functions and live with the need to lock my screen every time I'm away (I have it set up to lock my screen in a couple of keystrokes, so that's not that big of a deal). But then I realized that even if I did that, it would come back from sleep, perform the backup, head back to sleep, but at that point anyone could just come by, wake it back up from sleep and not need a password, because the screen doesn't get locked after the backup is made.
So here's the endpoint: I would like to keep my iMac secure throughout the day by requiring a password to use it, but on the same token I need it to be able to wake up from sleep in order to perform the backup.
I was thinking about never setting it to go to sleep and just locking my screen at night (with my monitor automatically turning off after X minutes), but I'm worried about keeping it on for a more than necessary amount of time- I figure that if I set it to sleep during the night it might theoretically prolong its life- can anyone comment on that? (I'm a recent OS X convert, so I'm still learning some things- and yes, I completely love OS X now!)
Thanks a lot for any insight you could provide.
Mac OS X (10.4.3)

Welcome to the Apple community:
You certainly don't need to worry about shortening your computer's life by leaving it on 24/7. I have my monitor set to sleep after a few minutes, but the computer never sleeps. One of the things that OS X does is run cron tasks (housekeeping, cleaning logs, caches and various mundane tasks) sometime early in the morning when you are unlikely to be using the computer. I think the latest iteration of 10.3 runs these at other times of the days, but the main thing is, don't fret about leaving your computer on, they are built to do this and you will save yourself a lot of fiddling about and accomplish what you want to do by simply leaving it on.
Miriam

Need help. Scheduled backup is killing the listener

I'm not sure what is going on. I scheduled a backup through the OEM and when the job kicked off, it shut down the listner, or killed it. The problem is that our startup/shutdown routines use the listener as a dependency, so when the listener dies, other Oracle servers also are shut down.
This server is in NOARCHIVELOG mode, so the backup has to happen offline, which I assumed meant simply shutting the database down, backing up and reopening it.
The main problem is that I can't seem to find the scheduled job, so everytime I restart the server, the job attempts to start again and kills the listener. I've done some searching, but I can't find the exact query/script to kill any scheduled backup job.

Is there software I can use to repair the boot record on my external HD?

Scheduled Backups in TM

Is it not possible to customize TM so that you can schedule backups less often than the default? Like just once a day at midnight? I really don't want it backing up while I'm in the middle of an intense graphics project. It seems to take up CPU power to do it's thing...

Changing the backup interval and scheduling the backups should be a mandatory update for Apple. I can't play iTunes while working anymore, because when Time Machine starts, my music skips all over the place which is annoying as ****!
Apple needs to get the Time Machine issue addressed with its first update, otherwise people will stop utilizing time machine, and will be subject to last data due to hardware or other failure like always, which completely defeats the purpose of having Time Machine (a touted major feature of Leopard).

ISE 1.2 scheduled backup not working

Hi all,
I have clean installation of ISE 1.2 (HA) Patch1 and tried to create scheduled backup from GUI. I can create it without problems but it does not start.
I have created manual backups which are working fine, so there is no problem with FTP server. I have checked CLI and there is no kron job in CLI as I would expect it from version 1.1.x.
Any idea or do you think its TAC case?
Thanks,
ML

There is known defect whereby if the timezone has more than 3 characters. Could you please check the timezone on the ISE CLI with "show timezone"
CSCui44324 ISE 1.2 scheduled backup can't be configured
Symptom:
Backup task can't be configured in ISE 1.2 UI
Conditions:
Install/Upgrade ISE to v.1.2
Login via GUI and try configure backup task under "Administration -> System -> Backup and restore".
ISE timezone shortname is more than 3 characters (e.g. CEST).
Workaround:
N/A
Further Problem Description:
Looks like patch 2 would fix this defect.
~BR
Jatin Katyal
**Do rate helpful posts**

EM Fails. Will scheduled backups be affected?

Hello.
I had a problem to our EM DBControl. It keeps on failing / or dying (issuing command emctl status dbconsole shows EM is not running). So i tried to drop all the repositories and recreate it. (+emca -create dbcontrol db -repos recreate -cluster+) Unfortunately, I wasn't able to complete it because it put our database to quiesce so i just kill the emca and unquiesce the DB. I planned to schedule it on low transactions. Now weird thing is when i try to use EM again the following day, its woking and its not failing anymore.
My major concern now is I used EM DBControl to facilitate backup and recovery. If ever EM will fail again, does the scheduled backup will also fail?
If during the process of backup the EM fails, will the datafiles,archives,control (whole DB) be corrupted?
Well I know that when I try prebackup that when I close the EM, the backup finished successfully, but I am not really sure if backup is done on all datafiles.
Hope someone would help.
Thanks,
Jay A

Thanks for the response, but I was referring more to where the metadata is stored. And unfortunately, the backup job is something associated with EM not the scheduler, as you will find no reference to these in dba_jobs. They are not visible in the administration > jobs page either. They are scheduled through the maintenance > schedule backup link, and can be viewed by selecting the scheduled,running,problem executions links on the homepage.
Thanks,
Jeremy

Schedule Backup on Oracle Enterprise Manager 10g

Hello All,
I am using Oracle enterprise manager 10g for schedule backup, i enter the user and password of operating system (windows XP) in Host Credentials part, but it return this error:
Connection to host as user khazaei failed: IOException in sending Request :: Connection refused: connect
khazaei is my windows username ,
any one can help me?
thanks in advance,
Hamzeh Khazaei

You need to add khazaei to the Local Security Policy "Logon as Batch Job". if you have already done so and you have logged on to a Domain, then add the domain to the username. e.g domain_name\khazaei.
BTW - you can get faster response to this issue in the EM forum
Enterprise Manager

EM Schedule backup,works only onces?

Hello ,
I have been working on EM for scheduling the backup of the schema level of one of the user's. I want to set that frequency to 30 mins. The hot backup should be taken every 30 mins each day. I set the whole thing, but the schedule backup get executed & succeeds only onces ... the 2nd time its dint get the job done ....
My question is ....
What should we do to schedule a backup in Enterprise Manager , & it should get executed regularly at the proper frequency ??????? Not just once's & stop .
I tried to find a lot on this on net , but dint get anything !!!! I also searched the forums on oracle.com but many people have asked the questions same as me but, no proper answers for it ....
Somebody please guide me how to schedule the backup in EM & it should work properly ....
ORACLE 10 R2
Windows Server 2008
Thanks in advance

DBA4 wrote:
Hello ,
I have been working on EM for scheduling the backup of the schema level of one of the user's. I want to set that frequency to 30 mins. The hot backup should be taken every 30 mins each day. I set the whole thing, but the schedule backup get executed & succeeds only onces ... the 2nd time its dint get the job done ....
My question is ....
What should we do to schedule a backup in Enterprise Manager , & it should get executed regularly at the proper frequency ??????? Not just once's & stop .
I tried to find a lot on this on net , but dint get anything !!!! I also searched the forums on oracle.com but many people have asked the questions same as me but, no proper answers for it ....
Somebody please guide me how to schedule the backup in EM & it should work properly ....
ORACLE 10 R2
Windows Server 2008
Thanks in advanceI don't know the answer to your immediate technical question, but I have a broader question for you. Why are you wanting to run a hot backup every 30 minutes? Most people find a full backup once a week and incremental backups once a day to be quite sufficient. With this schedule, your archived redo logs provide the final piece for full data recovery.

Personalization Scheduling Engine does not start -- Bug?

Hi there. I don't know if it's the correct forum to post my question. If I'm wrong I ask you to redirect to
the correct one.
I've correctly installed Oracle AS 10g release 1 according to the following topology, on the production
environment :
Server 1 --> Here we are three oracle homes : Identity Management , Middle Tier (Portal and Wireless) ,
Personalization.
Server 2 --> MetadataRepository
My problem focuses on Personalization. I advise that in my developing environment I've not got any problem.
So , I've installed Oracle AS Personalization without wornings. I've created RE,MOR and MTR schemas as the
procedure dictates. Problem's that Personalization Scheduling Engine does not start. It should start
automatically but It didn't. So I tried to start it by hand following "Oracle Application Server Hi there.
I don't know if it's the correct forum to post my question. If I'm wrong I ask you to redirect to the
correct one.
I've correctly installed Oracle AS 10g release 1 according to the following topology, on the production
environment :
Server 1 --> Here we are three oracle homes : Identity Management , Middle Tier (Portal and Wireless) ,
Personalization.
Server 2 --> MetadataRepository
My problem focuses on Personalization. I advise that in my developing environment I've not got any problem.
So , I've installed Oracle AS Personalization without wornings. I've created RE,MOR and MTR schemas as the
procedure dictates. Problem's that Personalization Scheduling Engine does not start. It should start
automatically but It didn't. So I tried to start it by hand following "Oracle Application Server
Personalization Administrator's Guide 10g(9.0.4)". Specifically , when I try to start the scheduling engine
with the command "execute OP_START_ENGINE" in the MOR schema I obtain an error linked to DBMS_JOB.run()
method. Digging deep into the Oracle alert log file I found this brief linked to the error executin the
script :
Thu Apr 14 17:57:28 2005
Errors in file E:\MetadataRepositoryHome\admin\asdb\udump\ORA01860.TRC:
ORA-12012: error on auto execute of job 119
ORA-29532: Java call terminated by uncaught Java exception: java.lang.Exception: Scheduler Workflow Error:
9756161113494248343 java.lang.NumberFormatException: 9756161113494248343
at java.lang.Long.parseLong(Long.java)
at java.lang.Long.parseLong(Long.java)
at oracle.dmt.op.util.messagelog.MessageLog.getExecutionContextID(MessageLog.java:857)
at oracle.dmt.op.workflow.SchedulerWorkflowClass.main_method(SchedulerWorkflowClass.java:101)
at oracle.dmt.op.workflow.SchedulerWorkflowClass.SchedulerWorkflowJava(SchedulerWorkflowClass.java:91)
ORA-06512: at "MOR_PORTALE.DMT_CLIENT_IDARWIN_WORKFLOW", line 0
ORA-06512: at line 1
So as the main error is "NumberFormatException" , I executed reverse engineering decompiling two Oracle
classes , just to know the origin of the error :
oracle.dmt.op.util.messagelog.MessageLog and
oracle.dmt.op.workflow.SchedulerWorkflowClass
After simple tracing I think I reached the origin and I shocked myself to see it!! The problem starts in the
main_method of oracle.dmt.op.workflow.SchedulerWorkflowClass, i.e. :
private void main_method()
throws Exception
String event_msg_args[];
traceMsg += "Start";
moduleID = "SchedulerWorkflowClass.main_method";
traceMsg += "-executionContextID";
executionContextID = MessageLog.getExecutionContextID();
The problem resides in the getExectiongContextID() method of oracle.dmt.op.util.messagelog.MessageLog class.
Code of this method is this :
public static long getExecutionContextID()
String hostIP = null;
try
InetAddress host = InetAddress.getLocalHost();
hostIP = host.getHostAddress();
catch(UnknownHostException ex) { }
StringBuffer buf = new StringBuffer(20);
if(hostIP != null)
for(StringTokenizer st = new StringTokenizer(hostIP, "."); st.hasMoreTokens(); buf.append
(st.nextToken()));
buf.append((new Date()).getTime());
String tmpString = buf.toString();
String idString = tmpString.replace('?', ' ');
idString = idString.trim();
int len = idString.length();
if(len > 19)
idString = idString.substring(len - 19);
long id = Long.parseLong(idString);
return id;
Simply , code obtains IP address of the Host , concats it with the current time and if the length of the
result string is longer than 19 it obtains substring of (len -19) length!! I think , Oracle programmer
thought to prevent NumberFormatException with the control "if(len > 19)
idString = idString.substring(len - 19);"
but that's strange , very strange!! In fact , in my case(with my IP Address 160.97.*.*) , method outputs
NumberFormatExceptio 'couse long "id = Long.parseLong(idString);" is not able to convert the String
"9756161113494248343" to java.lang.Long!!! 'couse it exceedes maximum value ( 2EXP(63)-1)!! So , I think
it's bug but I don't know how to solve it!! Problem's in method's semantic. It should control that the
String it creates is lower that the maximum value allowed for a long , not its length lower or equal 19!!!
I mean , I cannot modify Oracle Java Class file.
With kind regards,
Nicola

Fix in OracleAS 10.1.2.0.2 if you file a bug referencing bug 4397235 a backport of the fix can be provided on metalink.

ICloud backup doesn't start

Hello,
I have an iPhone 6 and it have always done iCloud backup without problems. Since a couple of week the backup doesn't start automatically when i connect it to the power (and with wifi). I can't find the cause, someone can help me?
Thank you

Greetings xamyr,
Welcome to the Apple Support Communities!
I understand that you are concerned about your iCloud Backup is not starting automatically. Along with being connected to power and connected to a Wi-Fi network, the iPhone display also must be locked. Please read over the attached information and let me know if the issue continues.
Get help creating an iCloud backup - Apple Support
Cheers,
Joe

Scheduled backups don't start.

Similar Messages

Maybe you are looking for