Scheduled BEX Broadcaster reports does not work automatically after BW 7.3 upgrade

Hello,
We recently upgraded our BW system from 7.0 to 7.31
Since then broadcasting reports has been inconsistent. Not all the reports are broadcasted.
Some reports of object type Query has been scheduled to run everyday but I don't see that in released status in SM37.
Some WAD templates throws an error that states " JAVA SYSTEM ERROR : EXCEPTION in method process function"
WAD reports also flags this warning : "Transformation Exception while transforming BEX web templates" in all the reports.
System Version:
BI ABAP 7.31 SP11
BI JAVA 7.00 SPS 30 Patch.
Most of the suggested SAP Notes are covered in this release.
SAP suggests to upgrade BI JAVA. But we are looking for a quick fix since JAVA upgrade has to go through a process and that's time consuming.
Appreciate your suggestions on this.
Thanks,
Nithya.

Hi,
Please have a look to the Blog - BI-JAVA, BEx Web and EP: the real connection to resolve your Problems after the Upgrade to 7.31.
There a quite massive differences between BI-JAVA 7.0x and 7.3x.
See also the Section BEx Web Java 7.3x in the SCN Document - BEx Versions 3.5 and 7.x after Upgrade
Best Regards Roland

Similar Messages

Discoverer Reports does not work in Multi-org Environment after R12 Upgrade

Discoverer Reports does not work in Multi-org Environment after R12 Upgrade. Created a simple report using the below query:
SELECT po_header_id, segment1, type_lookup_code
FROM po_headers
WHERE segment1 = '5000002'
Query works perfectly fine; when i set the ORG_CONTEXT in the database using the command:
EXEC mo_global.set_policy_context('S',129)
But the report doesn't fetch any data when ran from an Org based responsibility. We've ensured that the MO: Operting Unit is set accurately and general Oracle reports (PLSQL Program OR XML Publisher) are working perfectly fine.
===========
I followed the steps provided in Metalink Note: 732826.1 - It works for some responsibilities where the MO: Security Profile is not set; but fails for those responsibilities where the MO: Security Profile is set.
I am looking for specific solution that works irrespective of either the MO: Operating Unit profile is set of not.
Please suggest. Appreciate your response.
Thanks,
Kesava Chunduri

Hi Hussein,
Thanks for the quick response.
Yes, I've gone thru both the notes specified below:
Discoverer Workbooks Based On Organization Enabled Views Are Not Populated [ID 1293438.1]
- Tried this option; but this option is messing up a couple of Oracle Standard Functionalities.
- For ex: If i set this profile option; we are not able to create any receipts using Custom Responsibilities.
I am able to create the receipt, when i remove this profile option.
No Data Shows for Reports in Discoverer 10g with Applications Release 12 [ID 1054380.1]
- I see that the products i am running these reports from AR/GL - already exists in these tables.
Anything other options??
Thanks,
Kesava

TS3899 Since i have updated my iphone 5s to ios 8 or higher, the push mail does not work automatically, i have to refresh manually !

Since i have updated my Iphone 5S to IOS8 or higher, the push mail does not work automatically, i have to refresh manually, I haven't this problem with earlier versions !
I use Microsoft Exchange Mail server.
Even with Iphone 5 and IOS8, the problem doesn't exist !

Why would you expect it to work in 8.3, if it didn't work in a previous version? What troubleshooting have you done? Have you tried putting the car system into Pairing mode?

Fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue

fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue Asked this question yesterday. I desperately need info, will I ever be able to use fast dial again?

I tried it and it WORKED....I even tried the other version BEFORE this one and it didn't work so I tried yours and it worked like a charm so THANKS brother....

My Iphoto does not work properly, after downloading Mavericks. How can I fix it ? loading Mavericks

My Iphoto does not work properly after downloading Maverick. How can I fix it ?

With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you mean by not working properly? Explain in detail.
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution?

Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]]

I have been using Adobe Photoshop Elements on an older Mac...just bought Mac Mini and migrated all my files...but 4.0 Does not work....can I upgrade PSE 4.0 to PSE 13?

I have been using Adobe Photoshop Elements on an older Mac...just bought Mac Mini and migrated all my files...but 4.0 Does not work....can I upgrade PSE 4.0 to PSE 13?

Yes, any version of PSE qualifies for upgrade pricing, but if you're in the US you might want to consider running the trial for now and waiting for the black friday specials, when the full version will be a lot less than the adobe upgrade price.

My new orkut page does not works anymore after uptading firefox from Firefox v9.0.1 to 10

My new orkut page does not works anymore after I uptaded this morning my browser firefox from Firefox v9.0.1 to 10 . How can I find that version mozilla Firefox v9.0.1???

Hello, friend. Thank you so much. I've already solved the problem once you sent me that link.
Cheers!

BPC75NW: Offline Distribution of reports does not work in Schedule mode

Hello BPC experts,
I'm new in SAP world.
I have the following problem.
In BPC 7.50.06 NW I'm trying to adjust the distribution on e-mail to schedule.
I set up Distribution List. When I start the Offline Distribution Wizard -> Distribute Now all works without problems.
The problem starts when I start the Offline Distribution Wizard in the Schedule mode. All the settings I do the same as at "Distribute Now".
Then I set the report should be sent daily, starting with 13.10.2011, indicating the Start Time. As a System password I'm pointing my domain password (I know no other passwords).
At the time specified in the Start Time nothing happens, i.e. the schedule does not work.
Tell me, please, if faced with a similar problem, how it can be solved?
Thank you for your help, this is greatly appreciated.
Regards,
Todoshi Takato

Moved to .NET SDK forum.
Search here, lots of post on IIS and setting Printer Access Permissions for your application.
Also search MSDN on what is required to for IIS to access local Printers.
Also search for ActiveX Controls and Browser permissions, you'll likely have problems there also since most Browsers will not or do not recommend allowing any ActiveX control.
Don

Smartview v11.1.1.3 drill through reports does not work in grids?

Hi,
I'm using v11.1.1.3 and know there is a drill through function to FDM from Smartview grids. I've tried but it does not work in the grids, only works in the forms. However, I'm able to drill through to FDM from workspace grids. Does anyone encounters the same?? Appreciate any kinds advices. Thanks!

Are you certian that the report is showing an input level cell? Often reports are designed to run at Total dimension members, i.e. <Entity Curr Total> which you can not drill into.

Web reporting does not work in BW system

Hi-
I'm a BW consultant with very little BASIS knowledge and have been asked to look into why web reporting is not working on our system.
We get the following message when trying to run BW queries on the web:
Not found
The following error occured:
%3cpre%3e%0aLOCATION+++MessageServeronhosttongue%0aERROR+++++Grouptonguenotfound%0a%0aTIME+++++++TueMar2004%3a21%3a132007%0aRELEASE+++640%0aCOMPONENT+LG%0aVERSION+++5%0aRC++++++++-6%0aMODULE++++lgxx_mt%2ec%0aLINE++++++3518%0aDETAIL++++LgIGroup%0aCOUNTER++++10%0a%3c%2fpre%3e
I've checked SICF and all services are activated. I suspect that the problem is in the RZ10 parameters, but do not know what needs to be set there. Here are our settings:
rdisp/max_wprun_time                        3600
abap/cache_area                             10000000
abap/buffersize                             1500000
login/system_client                         100
INSTANCE_NAME                               DVEBMGS00
SAPSYSTEM                                   00
rdisp/wp_no_dia                             10
rdisp/wp_no_btc                             6
rdisp/wp_no_vb                              2
rdisp/wp_no_vb2                             1
rdisp/wp_no_enq                             1
rdisp/wp_no_spo                             1
DIR_TRANS                                   /usr/sap/trans
ms/server_port_<xx>                          PROT=HTTP, PORT=8080
icm/server_port_0                           PROT=HTTP,PORT=8080,EXTBIND=1
DIR_ORAHOME                                 /oracle/BWD/920_64
ipc/shm_psize_10                            104000000
ipc/shm_psize_14                            0
ipc/shm_psize_18                            0
ipc/shm_psize_19                            0
ipc/shm_psize_30                            0
ipc/shm_psize_40                            114000000
ipc/shm_psize_41                            0
Is there anything obvious missing?
Thanks,
Tristan

Following seems a little odd....
ms/server_port_<xx> PROT=HTTP, PORT=8080
I would expect something like:-
ms/server_port_0 = PROT=HTTP,PORT=8102 (or other relevent port number)

Report does not work in 2nd instance after transported

My SAP Script report does not come out correctly after its transport into a 2nd instance. The fonts displayed in the report don't look the same like what we have in instance #1.
The report originally created in the instance #1 is good, but after the transport, the fonts in instance #2 are larger and some of the contents are not properly aligned. Some part of the boxes are also missing. I would appreciate any suggestions of how to fix them. Thanks, Sam

Hi,
There might be a possiblity that the necessary style used in the SapScript is not transported to the New Instance and hence the Cosmetic issues...
Check whether all the associated objects like Style are transported to nre Instance or not?

CRVS2010 Beta - Crystal Report does not work with VS 2010

After having installed vs 2010, as mentioned, I dowloaded crsytal report . But when trying to create a new crystal report object, I have a html page displayed but crystal report does not start. I would like to know how to make crystal report start to create new report ?
Thanks
Patrick
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Thread moved to NET Development - Crystal Reports
Edited by: Ludek Uher on Aug 27, 2010 6:48 AM

My OS is windows XP. Visual studio 2010 Professional version 10.0.30319.1.rtm rel. Visual basic is 01018-532-2002102-70383. dot net framework is 4.0.30319 rtm rel. When I add a new crystal report object to my project a file named CrystalReport1.mht. Its content is :
From: <Saved by Windows Internet Explorer 8>
Subject: Crystal Reports for Visual Studio 2010
Date: Fri, 2 Oct 2009 17:24:34 -0700
MIME-Version: 1.0
Content-Type: multipart/related;
     type="text/html";
     boundary="----=_NextPart_000_0000_01CA4385.35B07AB0"
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.5579
This is a multi-part message in MIME format.
=_NextPart_000_0000_01CA4385.35B07AB0
Content-Type: text/html;
     charset="utf-8"
Content-Transfer-Encoding: quoted-printable
Content-Location: file://C:\_Working\Projects\Cortez\Stub Templates\RTM\EN\CR for VS 2010 HTML\CRforVS2010.html
=EF=BB=BF<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
then followed by characters whch are not readable.
Thank you for your help
Patrick

My wacom tablet does not work correctly after updating to mavericks.

My wacom doesn't work.

Jason, how did you switch back? My tablet does not work either. All I can do for the moment is work on my laptop which has the old system.
Thanks,
Teresa
I was almost certain that the new osx would be trouble as was Lion and after that Mountail Lion. So, instead of my usual hard drive clone, which I make with superduper, I made a second one just to be certain. After 10 minutes of Mavericks, I am happy back to snow leopard.
I really think that it is the most developed, glitch free operating system. If it wasn't for all these money thirsty companies stopping the support of the previous op. systems perhaps we could stop at Snow leopard. What more to ask. Even aesthetically osx 10.9 is much worse that snow leopard.
Anyway, long answer. sorry. It is a good habit to clone your HD once in a while.
p.s. my only reason for wanting to upgrade is because Lightroom stopped support but I am still doing my work with the previous versions. I guess people will allways think that if they have the newest, biggest, baddest version of a software will make them better in what they do..or in who they are, really.

Bluetooth does not work well after upgrade to win 8.1 from win 8

System: Dell Inspiron 15R 5520
Bluetooth hardware: Intel(R) Centrino(R) Wireless Bluetooth(R) 4.0 + High Speed Adapter
Microsoft Bluetooth Enumerator
Ever since I upgraded from Win 8 to 8.1, the bluetooth has not been working well.
The option to browse a remote folder or send a file does not work.
I can send a file only by opening the contaning folder, right click, and send to bluetooth, but cannot receive a file unless I go to
run and then open fsquirt.exe .
I have unpaired and uninstalled the devices respectively, and then reinstalled and repaired them. But this does not work .either.
Unfortunately, I am unable to paste screenshots of the device manager and error messages until I am verified.
Can anyone give me a solution to this problem?

Verify that you have the latest drivers for Windows 8.1 installed from the manufacturer's website.
http://www.dell.com/support/drivers/us/en/19/Product/inspiron-15r-5520

Scheduled BEX Broadcaster reports does not work automatically after BW 7.3 upgrade

Similar Messages

Maybe you are looking for