Scheduled ECO on Routing causes JO creation problems.

Discrete job order creation picks up BOM changes but not Routing changes of Scheduled ECO.
This is when revised item eff. date is prior to JO start date, but only if ECO is not implemented yet.
Four TARs later, wondering if anyone else creates job orders while scheduled ECOs for item exists?
-Gerry

Hi Robert,
Please check settings for Procurement type <it should be either X or E> in product master.
Also check model assignment for all Master data objects (Product, Location, Resource & PPM)
Thanks
Mangesh A. Kulkarni

Similar Messages

HT4356 will router cause a probelm?

I use hp laser jet p1102w with update firmware. Sometimes my ipad can recoginze the printer but most times doesn't.
I don't know why this going to happen. I use asus wireless router rt-n10. Is this router causing me this problem.

Maybe you should try changing:
1. Security setting WEP, WPA, WPA2
2. Wireless protocol e.g. a,b,g,n
3. Channel 1,6 or 11
4. Update router firmware

Routing Error - Scheduled ECO for Alternate Routing

Hi,
I'm creating routing using API ( and manually too, get same result)
Error Message Says:
ALT-2 routing for item 13662020 is pending from change notice 1475023.You must either make all changes to it through change notices or implement 1475023 first.
ALT-2 is the alternate I'm creating for item Routing 13662020 . I want to ask what is the link between ECO and Routing Alternate.
The ECO 1475023 has Alternat ALT-2 in it.
Thanks
Manu

The ECO 1475023 is trying to change the routing and you are trying to change it too.
So Oracle asks you to either implement or cancel the ECO.
The link is the change_notice field in the bom_operation_sequences table.
If you open the routing screen, change the drop down at the top from current/future to all and also uncheck the implemented box.
You will see the unimplemented changes.
Hope this answers your question,
Sandeep Gandhi

Database creation problems and parition consolidation

This is my first time on here so please look past my green-ness. =)
I Installed Oracle 8.1.7 successfully and opted to setup the database creation later so I could put the database on another partition. Well, I tried once to create the database on the partition I installed oracle onto (/oracle) but I had insufficient space, It said I needed 1.3 gigs. My "/database" partition is only a 1 gig parition (and /oracle is 2 gigs). My plan was of course, to seperate them.
Ok, I didn't see an option to create the db on another partition so I resigned to using /oracle. My question now is, is the 960 megs on /oracle enough to create the database? I used the custom setup so I could see how everything was broken down and I noticed that my rollback segment is 500 megs. Is this necessary? Can I get by with 100 megs and be fine? Also, if I did do this, I'd have approximately 100 megs free for data, this is enough I hope??
Lastly, I need to combine the partitions somehow without effecting /. The hard drive is broken down into:
gigs
5.5 /
2.0 /oracle
1.0 /database
Does anyone have any ideas? In windows, I used partiton magic but I don't know if there is a linux version.
One more thought (last one for real =), it had 50 megs allocated for it's shared memory pool. I'm assuming this will take away from the 128megs I have thus effectively making only 78 available to X, will this cause any noticeable problems other than a bit of slowdown? I have most if not all of my virtual memory free at all times. I know I should get more ram, but you know how the budget thing goes...
Any help would be greatly appreciated,
Rob

Try running the catalog and catproc sql scripts.
$ cd $ORACLE_HOME/rdbms/lib
$ svrmgrl
connect internal
@catalog
@catproc
That will set up all of the internal views and packages that
oracle needs to do DDL.
Scott
Don DeLuca (guest) wrote:
: I'm gotten through the install and created the database. The
: database comes up, I can do some simple stuff like create a new
: user, create a simple table but when I try to run SQL DDL
: statements I get errors saying: "recursive SQL error". I
: looked at the sql.log file after the install. It doesn't look
: like all the packages were created successfully. Have others
had
: similiar problems with the system table/package creation? To
me
: it looks like a DDL that was needed was not called during the
: install and later caused problems during package creation.
: This is my fourth time installing and I have the same problem
: each time. I also tried to run the plsql.sql file to recreate
: some of the packages but this did not work either.
: I've just about given up and I'm starting to realize why its
: free.
null

Pro Tools files imported to FCP X causing QuickTime movie problem

Well 2 days later and hours on the phone with Apple tech support Senior Advisors, and problem still not solved. HELP.
Everything works fine in FCP X, but when I create the QuickTime movie, it is way out of sync (by many seconds).
We have isolated the problem to audio files that I am exporting to Pro Tools, processing, and then importing back into FCP X. I can create a QuickTime movie with the original video/audio and it is fine.
Information
The original video came from Canon HF M40 camcorder: AVCHD (using MPEG4-AVC / H.264 compression codec), MTS format. Audio is 48kHz, 24 bits.
I used ClipWrap to rewrap the video into ProRes 422 and decompress the audio and save as LPCM.
I simply provide this FYI. As I said earlier, the original video works fine and the resulting QuickTime movie works fine. So the original files imported into the FCP project are not the problem.
The creation of the problem audio occurs as follows:
- Detach the original audio from the original video, and export
- Import this audio into a 48.0 kHz/16-bit Pro Tools HD session and EQ/limit the audio
- Import the resulting audio into FCP X (exact same length file, audio waveforms aligned with the original audio).
This audio works fine in FCP. It is in sync with the video, everything looks great.
I ran Pro Tools at 16-bits because a senior advisor told me FCP runs at 16-bits but does not convert imported stand-alone audio (as opposed to combined video/audio) to 16-bits; thus the Pro Tools session had to be at 16-bits. I changed from 24-bits to 16-bits, and this didn't solve the problem. (FYI, when Pro Tools imports the original audio exported from FCP, it says the audio is 24-bits, not 16-bits).
What is the problem?
The basic question is why does this audio cause QuickTime a problem?
Something is going on in the conversion to the QT movie. In FCP X, I don't have a way to play with the conversion variables except to set "Video and Audio" and "Use current settings" (which is ProRes 422).
The only difference I see between the original audio and the Pro Tools audio is that the original audio is stereo and Pro Tools works with dual mono files (L & R). The mono files work fine in FCP and I can't imagine why QT would have a problem with these, but I haven't tried converting the files to stereo before importing into FCP.
I should also mention that I selected the stabilization and roll correction algorithms in FCP. I assume these don't create problems in QT. I mention this because I didn't use them when I tested making a QT movie with the original video/audio files.
FCP and Pro Tools are used together all the time to do exactly what I am doing......improve the sound of the original audio. They are the premier video and audio professional programs. Of course, the final product is often not a QuickTime movie, but many times it is a QT movie.
What the heck is going on???
HELP.

(1) It is immediately out of sync. It even appears to be speeded up to me initially, but this is subjective. But it is clearly out of sync throughout, not a gradual drift.
(2) When I create the audio files in the Pro Tools session, the files are automatically stored in the audio folder of the Pro Tools session. So I don't actually have to go through an export process. I just close the Pro Tools session, then open FCP X and import the audio from the Pro Tools folder.
I'm not sure what additional specifications you seek, other than:
- wav files
- sample rate = 48 kHz
- Bit rate = 16-bits (and earlier I used 24-bits)
- Files are dual mono, rather than stereo (name_01.L.wav, name_01.R.wav). As I mentioned above, I have not yet tried converting these to stereo before importing into FCP, to see if dual mono causes an issue with QT. It does not cause a problem in FCP. I will try this today if we don't solve the problem.
(3) I can upload a portion of the audio to a server and send you a link to the file so you can download it. Is there a way to private message on the forum so I can get an email address to send you the link?
(4) The original video came from Canon HF M40 camcorder: AVCHD (using MPEG4-AVC / H.264 compression codec), MTS format. Audio is 48 kHz, 24 bits.
I used ClipWrap to rewrap the video into ProRes 422 and decompress the audio and save as LPCM.
The FCP Project was set up at:
- Starting time code - 01.00.00.00
- Format - 1080p
- Resolution - 1920 x 1080
- Frame rate - 29.97p
- Audio channels - stereo
- Sample rate - 48 kHz
- Rendering format - Apple ProRes 422

Rogers and Shaw ISP are the cause of iTunes Problems

Hi Everyone,
Over the past month Rogers (ISP) in Canada has put some software on their networks that prevents activity for BitTorrents, P2P, IRC, and also along with that is a rule that if you are trying to download a large media file from more then 1 server it will be dropped. When you download a Podcast from iTunes it downloads that file from multiple servers in the background (I confirmed this by watching my cable modem logs). As soon as it tries to use more than 2 different servers for the download, it just stops. That's the reason why Podcast downloads stop at random places - it's the point where a 2nd server is involved in the download. The same issue causes timeouts and cut-offs in the iTunes music store.
Here is the problem - when anyone calls Rogers about the problem they say it is either a router, firewall or Apple problem and they shrug you off.
Hundreds or thousands of people in Canada can no longer get Podcasts or purchase music from the iTunes Music store. This is BAD. Please, Apple, contact Rogers and sort it out. So many people have called Rogers with no luck.
It took a while to find out the problem and a lot of people have no idea what is going on. It isn't related to iTunes 6 - it just happened that Rogers made this change at about the same time as the iTunes 6 release.
[email protected]

I'm also experiencing the same problems using Rogers High-speed here in west Toronto.
If Mr. Brace's assertion is correct then it's absolutely unacceptable for Rogers to just arbitrarily modify their clients' networking mechanism simply because they're trying to manage "BitTorrents, P2P, IRC" etc.
Are we Rogers clients not all subject to enforced bandwidth quotas? Beyond the quota what right does Rogers have to deny my internet usage should that extend to "large media files from more than 1 server"?
Considering the ever-increasing spotlight on the iPod and all things Apple, I'd have to hope that Rogers aren't totally asleep at the helm and realize that they need to address the situation (or disprove it!) before current subscribers vote with their wallets and take their business elsewhere.
I'm going to contact Rogers during business hours tomorrow and have my call escalated as high as I can get it before explaining the situation and asking them what they plan on doing about it - stay tuned... I'm sure that they'll tell me that they've taken care of everything and we're back in business
Stonewall
iBook G4 / Mac mini Mac OS X (10.4.3)

New router solved my Safari problems

This is just an FYI. I have had many of the problems with Safari (both v4 and v5) discussed here. Frequent hangs, occasional crashes, Flash crashing, etc, especially when visiting pages with Flash Content. Also, after a hang I would quit (or force quit) Safari, yet would still have temporary connectivity issues (e.g., unable to connect to internet through Safari, Firefox, dashboard, etc) that would last about 20 seconds before regular internet connectivity was restored. During this time, activity tracker wouldn't show any obvious processes that could account for this. However, I connect to the internet using a wireless router so this was one possibility.
I tried all the remedies chronicled here, including checking for add-ons/plug-ins, deleting plist, clearing Safari and Flash caches, deleting and reinstalling Flash, reinstalling Safari, open DNS, turning off DNS prefetching, etc. I struggled with this (and have been frustrated by it) for quite some time, and had almost given up on Safari. However, being an original Mac user (I remember being excited about upgrading my 128K to a 512K) I really didn't want to admit defeat.
Accessing Flash-rich pages through Safari seemed to cause the connectivity problems, but the problems seemed to persist even after quitting Safari. For this reason, I decided to try using a new wireless router. I had been using a Netgear WGR614v5 (from 2004), and I had updated the firmware. I now have a new router (Netgear WNDR3400, N600) and all of these problems are gone. The old router was otherwise working fine (on an older, non-Intel iMac, a Powerbook, my iPhone and a windoze machine running Windows 7) so the problem seems to be how Safari (or OS 10.6) interacts with the router or its driver. I can now relate to those who are very happy with Safari and its speed and reliability.
So if someone is having similar problems, perhaps this info could be useful. Or, if the problem was unique to just my machine, then (if nothing else) this was just a chance for me to vent.
Also, there are a few users on this forum who have been very helpful (even for a lurker). So a big shout-out to you folks (you know who you are) and the very patient help you provide here.

Ditto what Bee said!
That is just the kind of really useful information based on user experience we need more of in the forums!
Please feel free to keep it coming!

Is XML Publisher causing shared memory problem..?

Hi Experts,
Since this week, many of the Requisition/PO are erroring out with the below errors or similar to these errors:
- ORA-04031: unable to allocate 15504 bytes of shared memorny ("sharedpool","PO_REQAPPROVAL_INIT1APPS","PL/SQL MPCODE","BAMIMA: Bam Buffer")
ORA-06508: PL/SQL: could not find program unit being called.
-Error Name WFENG_COMMIT_INSIDE
3146: Commit happened in activity/function
'CREATE_AND_APPROVE_DOC:LAUNCH_PO_APPROVAL/PO_AUTOCREATE_DOC.LAUNCH_PO_APPROVAL'
Process Error: ORA-06508: PL/SQL: could not find program unit being called
Few days back we were getting heap memory error for one of the XML Publisher report.
I heard that XML Publisher requires lot of memory for sources/features,So I want to know whether XML Publisher can be one of the cause for memory problem to occur or this shared memory is not related with XML Publisher sources at all.
Please advice.
Many thanks..
Suman
Edited by: suman.g on 25-Nov-2009 04:03

Hi Robert,
Thanks for your quick reply...
Apps version: 11.5.10.2
database version: 9.2.0.8.0
As I am a beginner in this so dont know much about this.. Can you please guide me on this.
DBAs has increased the shared memory and problem has resolved but here I am more concrened whether the XML Publisher was or can be one od the cause for shared memory problem. Is there any way to check that or this occurs randomly and we can not check this.
Please advice something.

My time capsule seemed to have given up so I have just got a net gear router, I have no problem connecting wirelessly but when I connect an Ethernet cable it says it's connected but pages will not load

My time capsule seemed to have given up so I have just got a net gear router, I have no problem connecting wirelessly but when I connect an Ethernet cable it says it's connected but pages will not load

Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

Firefox 5 has caused so many problems, I want to uninstall and go back to a previous version. how?

firefox 5 has caused so many problems, I want to uninstall and go back to a previous version. the problem is that one of the issues 5.0 has caused is an error message when I click on "add or remove " on my control panel, so I can't remove Firefox 5. I have downloaded and run 3 supposedly good "fixers", but nothing has corrected my error issue. how can I uninstall 5.0 if I can't open the "add or remove" option? edit
Details

''I figured it was going to be FAFSA causing your problem.''
Install Portable Firefox 3.6.x to your hard drive for that one website. It won't affect your current Firefox installation at all. <br />
http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

My iPhone is split from front panel on top, and back cover of my is swollen too. I am not able to use my phone and I cannot access my data in the phone. Please suggest what could be the cause of this problem?

My iPhone is split from front panel on top, and back cover of my is swollen too. I am not able to use my phone and I cannot access my data in the phone. Please suggest what could be the cause of this problem?

It sounds like the battery might have gone bad, and is swelling and causing the symptoms you describe. Do not attempt to use the phone, but take it to Apple for evaluation.

HT1349 When I send a text, it goes through as "text message" instead of an "imessage" and the person has an iphone. What can be the cause of this problem?

When I send a text, it goes through as a "text message" instead of an "imessage" and the person I am texting has an iPhone. what could be the cause of this problem?

It's not enough for the other person to just have an iPhone. They must be on iOS 5, have iMessage enabled and connected to the Internet.

HT3965 i put an emoji in my ipod name , and itunes will not recongize my ipod. could the emoji be the cause to my problem? what should i do?

i put an emoji in my ipod name , and itunes will not recongize my ipod. could the emoji be the cause to my problem? what should i do?

If you think the emoji is the cause of the problem, why not remove the emoji from your name?

What cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?

what cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?

SSince Apple does not support downgrading the iOS I suggest you start a new question that gives a good title to a specific problem. Then in the body of the thread describe the problem in detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received.

I am not accessing flash programs on mozilla3.5 like youtube videos although I have the flash software 10 installed it can play on ie explorer and other websites can you please tell me the cause of that problem and how it can be retified?

Also I am getting javascript error error on certain sites like ehow and facebook photo section can you please tell me the cause of that problem and how it can be retified?Finally I cant update ADobe reader to 10 at all its simply not downloading.Can you please tell me the cause of that too and how it can be retified so full flash services can be restored?

Oh no... NOT THE 99-PAGER!!! Anything but THAT!!!

Scheduled ECO on Routing causes JO creation problems.

Similar Messages

Maybe you are looking for