Scheduled in Xl Reporter

When i create a scheduled in Xl reporter, i act on elearning 's advice but it still haven't acted. I received a notice" could not start'.I do not understand. I tested more time.
Can you hepl me. Thanks!

Please make sure the following condition are met if you need the scheduled jon to run properly:
·         The report job must include at least one report package link. The report job must also include a specification of the output that you want the report job to create.
·         You cannot log off the computer that runs the report job. (Locking the computer is not a problem.)
·         If a report definition is already open, the report job cannot run.
·         Two report jobs cannot run simultaneously for the same user account.
·         SAP Business One must be running.

Similar Messages

How to create a event at the time of scheduling a webi report

if event fires then only it schedules the webi report
give in a brief steps
pls its urgent for me.

Refer to the below blog
http://scn.sap.com/community/bi-platform/blog/2013/01/07/cmcevents-in-business-objects-and-its-usage
Thanks,
Prithvi

Schedule a Webi report

Hi All,
I am getting error "A database error occured. The database error text is: Failed to execute MDX query. Reason: Inconsistent input parameter (parameter: <unknown>, value <unknown>). (WIS 10901) " while scheduling a Webi report.
Could anyone help me regards the error?
Regards

This error message means the parameter assigned to the prompt of the report while scheduling, was not correct.
Please check the parameters in the prompt section while scheduling and assign proper values.

Getting error while schedule a webi report

Hi All,
I am getting error "A database error occured. The database error text is: The supplied XML is not valid. [Measures].[4KO5AOUTL3ZKE55WDDOMUB0AI]. (WIS 10901) " while scheduling a Webi report.
Could anyone help me regarding the error?
Regards

Hi Manoj,
Go to the controls tab in parameters in universe designer and there increase the "Limit size of result set to" and "limit execution time to".
Also in webi go to the edit query and increase the "maximum rows retrived" and "maximu retrievel time".
I think this should avoid partial results.
Thanks,
Neeraj

SharePoint 2010: Scheduled Web Analytics Reports workflow is not sending ANY email

Hello,
I've a SharePoint 2010 Enterprise farm. I setup a Scheduled Web Analytics Reports workflow in a site collection with different web analytics reports options checked. So far I've not got ANY email. When I went to Site Workflows, I'm seeing that the workflow
is running. When I click on Completed status, I see below outcome in the Workflow History section:
"Email sent but reports with no data were not attached."
And I see below information in the Workflow History list:
"Attached are the daily Web Analytics reports for 1/7/2015 through 1/7/2015 for SharePoint Site Collection
http://server/team/site scheduled by workflow "SharePoint Site Web Analytics Reports". "
I am able to generate the reports manually by going to Site Collection Web Analytics Reports, but I want to schedule them. The problem is I'm not getting ANY email in my inbox. What am I missing here? Are the emails getting filtered by Outlook or workflow
is not sending emails at all?
Please help! This is getting frustrated.
Thanks,
Ashish

Hi Ashish,
Based on your description, my understanding is that the email is not sent from the Scheduled Web Analytics Reports workflow.
I recommend to the things below:
1. Check if the Outgoing email has been configured for the web application where you run the Scheduled Web Analytics Reports workflow.
In Central Administration > Application management > Manage web applications > select the corresponding web application > click General Settings in the ribbon and select Outgoing E-mail.
2. Make sure that your account has email address configured.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Schedule a Webi report from the CMC

Hi, ALL
Is there a way to schedule a Webi report from the CMC without using an email account in the
'from' box? There are other placeholders that can be used but I don't know how
to use them please advise.
Thanks.

Hermant,
You need to make sure you configure the proper email server. Go to the CMC - Server > AdaptiveJobServer>Destination>Email. You may need to enable Email as one of the Destinations.
You must configure all the HIGHLIGHTED options.
Regards,
Ajay

Error when try to schedule a Webi Report

Good day every one:
Can anyone please help me to solve this problem??? the issue is this, I want to schedule a Webi report but when i clic on Schedule and go to Format and Destinations tab, i got this message:
displayErrorMessage="VIEWER:VIEWER_ERR_DEFAULT (Error: INF )"; traceErrorMessage="\u003Cinput type="hidden" name="BENCHERROR" value="Error Number : - Error Description : VIEWER:_VIEWER_ERR_DEFAULT"\u003E";
And i can not see the formats availables to schedule the report and of course i can not see the configuration and destinations options.
Looking for an answer i found this:
http://forums.sdn.sap.com/thread.jspa?threadID=1537527
but that is an old post and i can not find the file mentioned there, can somebody please help me to fix this???
We are using:
BOBJ 3.1 SP3
Windows Server 2003
32 bits
Regards

I just found this
I was able to fix the issue by replacing the webiviewer.properties file with the file from the WARFILES\WEBAPPS directory. The webiviewer.properties file looks like it was corrupt as there was only 1 line in the file. After replacing and restarting the servers there's no longer an error when selecting Formats & Destinations.
I checked those webiviewer.properties and like you , one of them had only 1 line, about the language.
So I replace the one from Tomcat55\webapps\AnalyticalReporting\WEB-INF\classes with the one in the folder Tomcat55\webapps\AnalyticalReporting\classes
My guess is that this properties is corrupted because of the installation of other language. What should be done is updating the file with the new language parameters but what is done is a replace of the file.
I foun that in this link
http://www.forumtopics.com/busobj/viewtopic.php?t=150796&sid=bad10669f42c6de2b77e37b03122334d
I will apply this and if im success i let you know
Regards
Edited by: Elio Javier Guzman Hernandez on Oct 21, 2011 6:25 PM
Well the solution that i gave you works fine.
Regardas
Edited by: Elio Javier Guzman Hernandez on Oct 21, 2011 10:42 PM

How to schedule the webi report based on data changes in the report data

Hello,
I want to schedule a webi report based on data change in a column in the report.
The scenario is something like below:
1. If a data of a particular column changes from 2 to 3 than I would like to schedule this report and sent it to users mail box.
I know how to apply alerts or schedule a report or data tracking for capturing changes in the report but I dont know how to schedule the report only for data changes.
Anybody done this before.
Thanks
Gaurav

Hi,
May be these links can help you:
http://devnet.magicsoftware.com/en/library?book=en/iBOLT/&page=SAP_R_3_Master_Data_Distribution_Defining_Change_Pointers.htm
SEM-BCS: Load from data stream schedule
Attribute Change Run

Is it possible to schedule a Webi report based on another input, i.e. expose a time in which a process was finished.

These are Webi, user created reports.
Is it possible to schedule a Webi report based on another input, i.e. expose a time in which a process was finished (this can be obtained via a SQL call, service call, etc).
The issue is that if a user schedules a report for 9PM but a process to move data, etc has not completed then that forces the user to keep re-freshing the report hoping that the process has been complete.
Ideally, in the selection UI add to the dropdown for 'when' the option 'Use Process X completion Time' (since it is a daily report).
Then starting around 9PM check to see if that 'time" value is populated then refresh (run) the report. Or it could just be a flag that the process has finished.
User's in the webi environment are asking for this, and moving their reprots to BO is not an option. That's why they have the custom webi enviroment.
Thank you.

There is no very good way to create a working event based on a file as the file will need to be deleted as soon as the event is triggered. However there are work around which can be done for this. Here is a link which is discussing about the process.. http://scn.sap.com/thread/1677109
Once you have created a file based even in CMC > Events> System Events and made a work around program to delete the file once the event is trigged all you would need to do in webi is in launchpad just schedule > Events > select the file based event from all available system events. Here is a screenshot how to make a report run based on a event..

Re: Schedule a WEBI report once the BW process chain loading is completed

Hello Guys,
I want to schedule a webi report once the process chain in bw is sucessfully completed .Did any one face this situation before ?
is it possible to trigger a event from bw to webi and schedule a webi report to end users once the process chain loads the data into cube sucessfully
i searched sdn but didnt find any help related to this topic
can any one help me with the above issue asap
step 1 : Trigger the process chain load the data till cube
step 2 : add a process type whcih has program - at the end of the process chain
step 3 : trigger a event in BO inorder to schedule a webi report to end users from this program ? how to do it
i want to know how to trigger a event in bo from bw using r/3 program inorder to schedule a WEBI report
any help on this topic is highly appreciated

Hi Venkat,
At present, there is no standard functionality available in SAP NetWeaver 2004s BW/BOBJ that offers this integration and automation.But you can do it as given in following link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c09033ab-4593-2e10-5fa0-b23bcfa1575a?QuickLink=index&overridelayout=true&51887500308956
Regards,
Pushkar Dhale

Schedule a Webi report to multiple folders in BOXIR2 InfoView

Hi All Expert,
I might need your kind advice on what is the alternative way to do the below in BOXIR2 InfoView.
In my InfoView, i have several sub-folders under one folder. For eg, i have one "Sales" folder which contained multiple sub-folders as "SG", "CHI", "MYS", "JPN" and etc. I have one webi report created which have a country name prompt in the report and exported to each different sub-folders which the report prompt have been selected for each country name before export to the sub-folder. Eg, "SG" sub-folder have a webi report with "Singapore" as country name in the folder. All of the sub-folder's report are using the same webi report design.
My problem now is i need to open each of the webi report in the sub-folder to everytime when i need to perform a schedule or perform changes on the report design. If i have 12 sub-folders, i need to open 12 times to perform changes one by one or schedule the report to run one by one.
Are there any other alternative way to schedule one time then BO will copy the relavant report or instance to the multiple folder?
Appreciated your kind advice.
Regards,
Chee Koon

Hi
a publication object allows you to schedule X webi reports (which reside in several subfolders in your system) at once.
If you want to first to create/overwrite copies of your report in X subfolders and then schedule them all at once then you have to go with the SDK (even in BO XI 3.x)
You can find more information about the SDK here: http://www.sdn.sap.com/irj/boc/sdklibrary
Regards,
Stratos

Getting error when schedule a webi report

Hi All,
I am getting error "Cannot initialize Report Engine server. (Error: RWI 00226) Error: INF) while schedule a Webi report.
Could anyone help me regarding the error?
Regards

Hai
Check this Links
http://www.sap-forum.org/f22/smtp-error-when-scheduling-webi-report-t483/
http://www.businessobjectstips.com/tips/server/sizing-limits-to-web-intelligence-report-server-maximum-simultaneous-connections/

Customize Scheduled Payment Selection Report in R12

Hi,
How can I customizing the Scheduled Payment Selection Report in R12?
I need to declare new concurrent for this report that submit from a payment process.
Rivka

Hi Rivka,
See note 564350.1.
Basically don't create a new concurrent program. Instead:
1. Create a new RDF and change the executable on APINVSEL to your new executable
2. Create a new BI Publisher RTF Template and duplicate APINVSEL rtf, making sure the Data Template is same as source one.
3. In System Administration (note not System Administrator) go to Concurrent, Program, query APINVSEL, click OnSite settings and change to your custom template.
Regards,
Gareth

How to copy schedules of a report

Hi,
I am using Hyperion IR 11.1. Is there any way to copy the schedules of a report into other server? I have created a report and have added a schedule to the report in the dev server. Then migrated the report into the test server. Now in the test server i could run the report but the schedule that was added in the dev server is missing in the test server. Do i need to add the schedules manually in the test server as well?

This is the SQL and PL/SQL forum.
You want the [Reports Forum|http://forums.oracle.com/forums/forum.jspa?forumID=84].

Schedule Mass Crystal Report

Hi,
Problem: Schedule a mass report for crystal report XI R2 in BO Enterprise XI R2
Example: If i would like to export the customer's report separately for 1000++ customers, how can I design the crystal report so that i can export the data individually for each customer to either PDF, or HTML or Email with the report name = customer name
all comments or suggestion appreciated
Thanks
Yii Ing

Hi,
You can use the features of schedule - email from BOSDK, which will solve your requirement.
thanks,
Amzad Basha.

Schedule Cluster Validation Report

Is there a way to schedule a validation report to run once a day? We would also need to have Storage deselected in the test selection. Thanks.

Alexey provided you with references to use PowerShell. Here is where you go to learn about the task scheduler -
http://technet.microsoft.com/en-us/library/cc721871.aspx Or, if you want to use PowerShell for that part, too -
http://technet.microsoft.com/en-us/library/jj649816.aspx
Your question really is not related to Hyper-V, though. Is there some other reason you posted in the Hyper-V forum?
. : | : . : | : . tim

Scheduled in Xl Reporter

Similar Messages

Maybe you are looking for