Scheduled jobs do not run as expected after upgrading to 10.2.0.3 or 4

FYI, we've had a ticket open for several days because our scheduled jobs (dbms_scheduler) would no longer run as scheduled after an upgrade to 10.2.0.4 on HPUX, couldn't find the solution by searching in metalink, nor did I find it here or using Google - obviously I wasn't searching correctly. There is a note id that references a set of steps that appears to have resolved our problem. I am putting this note out here so that if you encountered the same difficulty you may come across this note earlier in your troubleshooting efforts rather than later. The full title of the note is: 'Scheduled jobs do not run as expected after upgrading to either 10.2.0.3 or 10.2.0.4'. The Doc ID is: 731678.1.

Thanks - our ticket should be getting closed out on it (our dba will be updating it), the scheduler has been running reliably since we took the steps in the doc mentioned.

Similar Messages

Scheduled Brio/IR Jobs are not running as expected in EPM 11.1.2.2

Hi All,
We are observing some scheduled jobs are not running as expected,they are not running on the scheduled time.
Given below are more details.
We have 2 Jobs running at 6:00 AM daily based on single Recurring Time Event and it is observed that this jobs are not running on time(ex: 6:06 AM EST).
I tried verifying Consolidate Job Status in workspace admin options and the v8_RecurtimeEvent table for any miss in the 'Next Run Time',
but they were having the scheduled date/time of run.No clue from EPM Logs.
Interesting observation is the same jobs are running after updating the schedule time a little bit further(ex: 6:06 AM to 6:07 AM),but again after some days
the updated job(6:07 AM ) will stop running.
Thanks,

Put the IR job logs in TRACE:32 mode which will give more information in the logs . Refer this document link to put in TRACE mode :http://docs.oracle.com/cd/E17236_01/epm.1112/epm_install_troubleshooting_1112200.pdf
Thanks,
KK

Scheduled jobs are not running DPM 2012 R2

Hi,
Recently upgraded my dpm 2012 sp1 to 2012 R2 and upgrade went well but i got 'Connection to the DPM service has been lost.(event id:917 and other event ids in the eventlog errors ike '999,997)'. Few dpm backups are success and most of the dpm backups consistenancy
checks are failed.
After investigating the log files and found two SQL server services running in the dpm 2012 r2 server those are 'sql server 2010 & sql server 2012 'service. Then i stopped sql 2010 server service and started only sql server 2012 service using (.\MICROSOFT$DPM$Acct).
Now 'dpm console issue has gone (event id:917) but new issue ocurred 'all the scheduled job are not running' but manully i can able to run all backup without any issues. i am getting below mentioned event log errors
Log Name: Application
Source: SQLAgent$MSDPM2012
Date: 7/20/2014 4:00:01 AM
Event ID: 208
Task Category: Job Engine
Level: Warning
Keywords: Classic
User: N/A
Computer:
Description:
SQL Server Scheduled Job '7531f5a5-96a9-4f75-97fe-4008ad3c70a8' (0xD873C2CCAF984A4BB6C18484169007A6) - Status: Failed - Invoked on: 2014-07-20 04:00:00 - Message: The job failed. The Job was invoked by Schedule 443 (Schedule 1). The last step to
run was step 1 (Default JobStep).
Description:
Fault bucket , type 0
Event Name: DPMException
Response: Not available
Cab Id: 0
Problem signature:
P1: TriggerJob
P2: 4.2.1205.0
P3: TriggerJob.exe
P4: 4.2.1205.0
P5: System.UnauthorizedAccessException
P6: System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal
P7: 33431035
P8:
P9:
P10:
Log Name: Application
Source: MSDPM
Date: 7/20/2014 4:00:01 AM
Event ID: 976
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer:
Description:
The description for Event ID 976 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The DPM job failed because it could not contact the DPM engine.
Problem Details:
<JobTriggerFailed><__System><ID>9</ID><Seq>0</Seq><TimeCreated>7/20/2014 8:00:01 AM</TimeCreated><Source>TriggerJob.cs</Source><Line>76</Line><HasError>True</HasError></__System><Tags><JobSchedule
/></Tags></JobTriggerFailed>
the message resource is present but the message is not found in the string/message table
plz help me to resolve this error.
jacob

Hi,
i would try to reinstall DPM
Backup DB
uninstall DPM
Install DPM same Version like before
restore DPM DB
run dpmsync.exe -sync
finished
Seidl Michael | http://www.techguy.at |
twitter.com/techguyat | facebook.com/techguyat

App updates not running on ipad2 after upgrade to iOS 5 - anybody know or a solution or have same problem?

App updates not running on ipad2 after upgrade to iOS 5 - anybody know or a solution or have same problem?

Operator error! The mute button was on.

Some Schedule jobs are not running in Oracle 10g

i have total of 8 Schedules jobs in Oracle 10g test database which were not in sync with prod database . So i re-created all of them again and then enbled them . but some 4 of them didnt ran on their NEXT_RUN_DATE . Showing NULL on LAST_START_DATE and LAST_RUN_DURATION . How to make them Run
select OWNER,JOB_NAME,START_DATE,STATE,SCHEDULE_NAME,LAST_START_DATE,LAST_RUN_DURATION,NEXT_RUN_DATE from ALL_SCHEDULER_JOBS
where OWNER='MESH_FOR' and last_start_date is NULL;
OWNER     JOB_NAME     START_DATE     STATE     SCHEDULE_NAME     LAST_START_DATE     LAST_RUN_DURATION     NEXT_RUN_DATE
MESH_FOR     REFRESH_TERMINALS_J     27.07.2010 11:00:00,000000000 +02:00     SCHEDULED     DAILY_EVERY_30_MINUTES     NULL     NULL     27.07.2010 11:00:00,000000000 +02:00
MESH_FOR     REFRESH_MN_SERVERS_J     27.07.2010 11:00:00,000000000 +02:00     SCHEDULED     DAILY_EVERY_30_MINUTES     NULL     NULL     27.07.2010 11:00:00,000000000 +02:00
MESH_FOR     REFRESH_EVENT_INFO_J     27.07.2010 11:00:00,000000000 +02:00     SCHEDULED     DAILY_EVERY_30_MINUTES     NULL     NULL     27.07.2010 11:00:00,000000000 +02:00
MESH_FOR     UPDATE_MV_CHANGES_J     27.07.2010 11:00:00,000000000 +02:00     SCHEDULED     DAILY_EVERY_30_MINUTES     NULL     NULL     27.07.2010 11:00:00,000000000 +02:00

Hi,
Could you please explain, what is OS authentication?
I created a new user for creating and runing jobs.
I have given following priveleges to the new User.'
1)Connect
2)SELECT_CATALOG_ROLE
3)Create Job
Then, I created the job as follows.
BEGIN
sys.dbms_scheduler.create_job(
job_name => 'SMPL_TST_JB',
job_type => 'PLSQL_BLOCK',
job_action => 'Declare
Result Integer;
begin
Result:=1;
/* Other statments */
Exception
when others then
Result:=3;
end;',
repeat_interval => 'freq=daily;byhour=10;byminute=00;bysecond=00',
start_date => systimestamp,
job_class => 'DEFAULT_JOB_CLASS',
auto_drop => FALSE,
enabled => TRUE);
sys.dbms_scheduler.set_attribute( name => 'SMPL_TST_JB', attribute => 'logging_level', value => DBMS_SCHEDULER.LOGGING_FULL);
sys.dbms_scheduler.set_attribute( name => 'SMPL_TST_JB', attribute => 'restartable', value => TRUE);
END;
Then, I run the job as following.
SQL> begin sys.dbms_scheduler.run_job ('SMPL_TST_JB'); end;
2 /
begin sys.dbms_scheduler.run_job ('SMPL_TST_JB'); end;
ORA-03113: end-of-file on communication channel
Thank you,
Regards
Gowtham Sen.

Conversion routines do not run for ALV after upgrade

Hi,
We just upgraded from 4.6 to 6.0 and the custom created ALV reports which had fields like MATNR , VBELN , AUFNR now show leading Zeros. It seems the conversion routines are run before the list is displayed.
If we add the REF_FIELD and the table in the Field Catalog, it seems to work, but that would a big change as we would have to manually change all the reports. Any suggestions.
Regards,
SG

Thanks - our ticket should be getting closed out on it (our dba will be updating it), the scheduler has been running reliably since we took the steps in the doc mentioned.

Access Control not working as expected after upgrade to 7.5.2

I have a Time Capsule set up with mac address access control on the main network plus a guest network. After the upgrade to 7.5.2, it seems that the access control is applying to my guest network and the main network is allowing all devices on it. Has anyone else seen anything like this and/or know what to do about it?

I am also seeing this behavior. The workaround is to add all the guest network devices to your ACL. But this is a regression - there isn't much point in having a guest network that requires updating the base station each time a new device joins.

Scheduled jobs fail to run after reboot

A couple of months back we moved our CF 8 server to a VM (VMWare). We have noticed that after the server (Windows OS) is rebooted, all scheduled jobs do not run. There are no errors in the logs. One oddity is that after the reboot in the scheduler log there are a series of entries for all jobs with the ThreadID of "main", after that there are no other entries. Normally when the job runs the ThreadID will be something like “Scheduler-1”. Here is where it gets really strange. Simply logging into the console will “trigger” the jobs and they will run. I do not have to manually initiate on of the jobs. This can be repeated over and over simply by rebooting the server. Manually stopping and starting the service does not trigger this issue nor will it “kick start” the jobs to run.

Update:
I opened up a case with Microsoft Support and resolved the issue. Apperantly this is a known issue and the bug will be addressed in CU6. Microsoft was able to give me a hotfix (QFE_MOMEsc_4724.msi) which I applied on all systems that have SCOM Console. I
am told that this issue occurs when SCOM 2007 R2 CU5 runs on SQL 2008 R2.
I hope it helps to others that run into same problem.
ZMR

Oracle automatic statistics optimizer job is not running after full import

Hi All,
I did a full import in our QA database, import was successful, however GATHER_STATS_JOB is not running after sep 18 2010 though its enable and scheduled, i did query last_analyzed table to check and its confirmed that it didnt ran after sep18,2010.
Please refer below for the output
OWNER JOB_NAME ENABL STATE START_DATE END_DATE LAST_START_DATE NEXT_RUN_D
SYS GATHER_STATS_JOB TRUE SCHEDULED 18-09-2010 06:00:02
Oracle defined automatic optimizer statistics collection job
=======
SQL> select OWNER,JOB_NAME,STATUS,REQ_START_DATE,
to_char(ACTUAL_START_DATE, 'dd-mm-yyyy HH24:MI:SS') ACTUAL_START_DATE,RUN_DURATION
from dba_scheduler_job_run_details where
job_name='GATHER_STATS_JOB' order by ACTUAL_START_DATE asc; 2 3 4
OWNER JOB_NAME STATUS REQ_START_DATE ACTUAL_START_DATE
RUN_DURATION
SYS GATHER_STATS_JOB SUCCEEDED 16-09-2010 22:00:00
+000 00:00:22
SYS GATHER_STATS_JOB SUCCEEDED 17-09-2010 22:00:02
+000 00:00:18
SYS GATHER_STATS_JOB SUCCEEDED 18-09-2010 06:00:02
+000 00:00:26
What could be the reason for GATHER_STATS_JOB job not running although its set to auto
SQL> select dbms_stats.get_param('AUTOSTATS_TARGET') from dual;
DBMS_STATS.GET_PARAM('AUTOSTATS_TARGET')
AUTO
Does anybody has this kind of experience, please share
Apprecitate your responses
Regards
srh

?So basically you are saying is if none of the tables are changed then GATHER_STATS_JOB will not run, but i see tables are updated still the job is not running. I did >query dba_scheduler_jobs and the state of the job is true and scheduled. Please see my previous post on the output
Am i missing anything here, do i look for some parameters settings
So basically you are saying is if none of the tables are changed then GATHER_STATS_JOB will not run,GATHER_STATS_JOB will run and if there are any table in which there's a 10 percent change in data, it will gather statistics on that table. If no table data have changes less than 10 percent, it will not gather statistics.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/stats.htm#i41282
Hope this helps.
-Anantha

Report job is not run at scheduled time

OS：WindowsServer2008R2
Oracle BI 11g(11.1.1.6.0)
CT defined a report job
====
Frequency Daily
Start 2013/01/14 AM 06:00:00
End 2020/01/14 PM 11:59:00
timezone [GMT+09:00]Osaka,Tokyo
====
but he found the report is not run at 06:00:00
at 2013/01/16 08:50AM,he login to BIP,and got to Report Job history.
he found the staus of this report is running and
start processing is 2013/01/16 08:51:32AM
It seems the report job is run after login.
In CT's environment , the followinig work are done Every Day
22:00　stop OracleBI　　(opmnctl.bat→stopManagedWebLogic.cmd→stopWebLogic.cmd）
00:00　restart server
05:45　clear cashe (nQCmd.exe)
05:45　start OracleBI(BI_START.bat)
06:00　report job is not run for no mail received.-->★
Could you tell me why the report job are not run at 06:00AM
Does any one can give me some advice on investigating this issue, which information are needed?

Any suggestion on this issue?

Job not running on expected time

Hi,
Please see the job details
X NUMBER;
BEGIN
SYS.DBMS_JOB.SUBMIT
*( job => X*
*,what => 'BEGIN INVS_RIM_DATA_LOAD(''01A'',''RIMADMIN'',TRUNC(SYSDATE)); END;'*
*,next_date => to_date('15/08/2011 23:09:00','dd/mm/yyyy hh24:mi:ss')*
*,interval => 'TRUNC(SYSDATE+1)+23.15/24'*
*,no_parse => TRUE*
SYS.DBMS_OUTPUT.PUT_LINE('Job Number is: ' || to_char(x));
END;
commit;
For taking the cold backup, db is shut down on every Friday 11:00PM and open by 02:30 PM Saturday. So job expected to run on Friday night will be running by Saturday 02:30AM. It is ok for us. But problem is job is not running on Saturday night.
When checked on Sunday morning the user_jobs shows details as
Last_date : 13-Aug-2011 02:30:14 AM
Next_Date : 14-Aug-2011 11:09:00 PM
Issue we are facing is job is not running on 13-Aug 11:09:00 PM
Please help me to fix this issue.

Well, it runs on the expected time (for me). This is your interval: TRUNC(SYSDATE+1)+23.15/24
If the last job run at 13-Aug-2011 02:30:14 AM, then the next one should be:
= TRUNC( '13-Aug-2011 02:30:14 AM' + 1 ) + 23.15/24
= TRUNC( '14-Aug-2011 02:30:14 AM' ) + 23.15/24
= '14-Aug-2011' + 23.15/24
= '14-Aug-2011 11:09:00 PM'
You can create an additional job which will work at Saturday nights. This is the easiest fix I can think.
Regards
Gokhan Atil

IDOC Monitoring issue - job BPM_DATA_COLLECTION* not running.

Hi all,
We are facing an issue with BPM "IDOC Monitoring" (under application monitoring), which we have setup to monitor Inbound and Outbound Idocs in 2 separate R/3 systems.
In one system it works fine, and measured values are returned each time the monitor is set to run according to the specified schedule.
However, for another R/3 system, the monitor has never run, even though the settings are identical in the monitoring setup.
From reading the Interfaces Monitoring Setup guide, I found that this monitor depends on a job called BPM_DATA_COLLECTION* which runs in the monitored system. In the system where monitoring is functioning correctly, I can see this job is completing successfully at the time the monitor is set to run. All I find is completed jobs - no scheduled or released jobs present.
However, for the system where the monitoring is not functioning, I found that this job is not running, but that the job is sitting in scheduled status instead.
When I tested manually running the job in this system, it ran successfully, and in Solution Manager the monitor brought back the measured value, so the monitor only ran successfully when I manually ran the job in the monitored system.
I read notes 1321015 & 1339657 relating to IDOC monitoring. 1321015 appears to be more relevant, yet it does not exactly describe my issue - it mentions the job BPM_DATA_COLLECTION* failing rather than just remaining in scheduled status which is what I see.
Anyone else see this issue before?
On a more general point - the standard BPM Setup guide doesn't really go into much detail on IDOC Monitoring, and makes no mention of what is happening in the background, i.e. the job BPM_DATA_COLLECTION* being created and run as per schedule. This info is found in a separate document "Interface Monitoring Setup Guide".
Is there any single document which describes fully what happens both in the Solution Manager and the Monitored systems when BPM is activated? For example, to describe which monitors require jobs to be run, which monitors require additional setup in monitored system, etc? A document such as this which describes exactly the process flow for each monitor would be very useful in troubleshooting issues going forward.
Thanks,
John

Hello John,
most probably the user assigned to the corresponding RFC READ connection that connects SolMan with the backend system doesn't have proper authorization to release a job. That's why it is only created/scheduled but not released. Verify if the RFC user on the backend has the latest CSMREG profile assigned according to SAP note 455356.
You can also check if the latest ST-PI support package is installed on your backend system as the ST-PI usualy contain the latest definition of CSMREG.
Best Regards
Volker

How to Schedule Jobs to only run during a time window

I have a long running task that needs to schedule jobs to process data.
I only want these scheduled jobs to start during a specific window of time each day, probably 10:00 PM to 6:00 AM.
If the scheduled jobs do not begin during the specified time frame, they must wait until the next day to start running.
Each scheduled job will only be executed once and then auto dropped.
How should I go about creating these scheduled jobs?

Hi Jeff,
I agree that the documentation isn't clear enough about the purpose of windows.
You can indeed use windows for changing the resource plan, but you can also use them for scheduling your jobs.
I did a simple test in real-time to illustrate the latter.
At around 10.30 am today I created a table that will populated by a job:
CREATE TABLE TEST_WINDOW_TABLE(EVENT_DATE DATE);
Then, I created a window whose start_date is today at 10.40 am :
dbms_scheduler.create_window(
                             window_name     =>'TEST_WINDOW',
                             resource_plan   => NULL,
                             start_date      => to_date('10/04/2014 10:40:00', 'dd/mm/yyyy hh24:mi:ss'),
                             repeat_interval => NULL,
                             duration        =>interval '5' minute
You can see that this window doesn't have a resource plan, and its repeat interval is NULL (so it will be opened only once).
The window will stay open for 5 minutes.
Finally, I created a one-off job whose schedule is the previously created window:
DBMS_SCHEDULER.create_job (
                           job_name      => 'TEST_WINDOW_JOB',
                           job_type      => 'PLSQL_BLOCK',
                           job_action    => 'BEGIN insert into test_window_table values (sysdate); COMMIT; END;',
                           schedule_name => 'SYS.TEST_WINDOW',
                           enabled       => true,
                           auto_drop     => true
Checking the user_scheduler_job_log before 10.40 would return no rows, which mean the job hasn't started yet since the window was not open.
Now, from 10.40, it shows one entry:
SQL> select log_date, status from user_scheduler_job_log where job_name = 'TEST_WINDOW_JOB';
LOG_DATE                                                                         STATUS
10/04/14 10:40:02,106000 +02:00                                                  SUCCEEDED
The TEST_WINDOW_TABLE has also got the row:
SQL> select * from TEST_WINDOW_TABLE;
EVENT_DATE
10/04/2014 10:40:02
Voilà.
In your case, since you want to run the jobs daily between 10 pm and 6 am (duration of 8 hours), the window would look like this:
dbms_scheduler.create_window(
                             window_name     =>'YOUR_WINDOW',
                             resource_plan   => NULL,
                             repeat_interval => 'freq=daily;byhour=22;byminute=0;bysecond=0',
                             duration        =>interval '8' hour
For your jobs, you may need to specify an end_date if you want to make sure the job gets dropped if it couldn't run in its window.

Job is not running in Source system.

Hi Experts,
One issue I have because of this I am not able to load data into Data sources.
I am in BI 7.0 environment.
when I execute infopackage, total and techinical status are in yellow.
I found in R/3 Job is not running, based on this statement in SM37. from the fallowing.
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 0 records
Result of customer enhancement: 0 records
IDOC: Info IDoc 2, IDoc No. 3136, Duration 00:00:00
IDoc: Start = 14.05.2009 07:23:39, End = 14.05.2009 07:23:39
Synchronized transmission of info IDoc 3 (0 parallel tasks)
IDOC: Info IDoc 3, IDoc No. 3137, Duration 00:00:00
IDoc: Start = 14.05.2009 07:23:39, End = 14.05.2009 07:23:39
Job finished
Job satrt time and end time are same, so job is not running in the sourcesystem, am i right. let me known if i am worng.
It is Standard Data source but in the above statement becasue *result of Customer enhancement:0 records.*
please help me to reslove this issue to load data into BI.
1. what I have to do to run job in source system side.
2. should I take any help from Basis.
Regards
Vijay
Edited by: vijay anand on May 14, 2009 3:02 PM
Edited by: vijay anand on May 14, 2009 3:04 PM

Hi Rupesh,
in RSA3 data is availbale,
but it is not coming to BI,
Messages from source system
see also Processing Steps Request
These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BI. The number of the records received in BI is checked against this information.
the abovemessage I am getting in details tab.
Regards
Vijay

Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ???

Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ?????????????????

1st problem see http://kb.mozillazine.org/Firewalls
2nd problem, to close Firefox properly use File > Exit
:not with the [x] in upper right corner which close window
:see http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit
:if restarting use "Restartless Restart" extension as mentioned there.
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

Scheduled jobs do not run as expected after upgrading to 10.2.0.3 or 4

Similar Messages

Maybe you are looking for