Scheduled process chain not getting triggered properly

Hi all,
Process CHAIN, variant ZPC_MASTER_COMMON is not scheduled waiting for event RSPROCESS 3Y7V2S5WLYJ5VGT8IMCSG068H, after this message the job gets cancelled for any process chain when i schedule it as a periodic job.

Hi,
Please check if in the job you have 3Y7V2S5WLYJ5VGT8IMCSG068H entered as the event name. If yes, please change and activate again.
-Vikram

Similar Messages

Change Process are not getting triggered

Hi,
I have changed the first name of the user in OIM but the same is not getting sycned in DSEE.
When I have added the Change First Name Process task from Resource then it got successfully completed and the user's first name got changed in DSEE.
Automatically Change First Name process task is not getting triggered. It worked for me earlier but now it is not working.
Could you please let me know the reason for the same.
Thanks

verify below
1. task name under DSEE process def and process trigger lookup is exactly same(remove if any white space etc.)
2. make sure the task is marked as conditional
3. Allow Multiple should be checked
--nayan

Process chain notification gets triggered on Success?

Hi,
I have enabled the process chain failure notification for our key process chains. However we have noticed that the process chain gets triggered even if the process chain is run successfully.
I am ONLY using the notification on ERROR message and NOT on success message.
Any idea why the process chain gets triggered when the process chain is run successfully? am i missing something?
Cheers

Hi there,
Why don't use another functionality of sending messages through the transaction RSPCM
In there, you can add the chains you wish to monotorize and click on "Plan Monitoring (F7)" and schedule a job.
With this method only chains with errors gets triggered.
Diogo.

Local process chain not getting started

Hi guys ,
we have a composit chain which ran 3 local chain when it comes to 4th local chain its says BI_PROCESS_CHAIN is ok
but its not starting when we see in the sm37 is says folloing things
Job started
Step 001 started (program RSPROCESS, variant &0000001009590, user ID BWEXTRACT)
Communication buffer deleted from previous run 487JGCGX7IC6WJ3SE6QEGFH2O (status X)
Version 'M' of chain IMPCB022 was saved without checking
Chain Is OK
can any one help me
thanks
dp

Hi DP
Since the local chain is not started, it seems that that is not active.
Goto local chain which didn't get started, check for jobs by context menus ( show all jobs) and if you find a job in released state that means chain is active and it should run, but if you don't find any chain in the released state that means you need to activate and schedule 4th local chain again.
Once you do that, then you need to activate the final parent chain also.
Please try to do this and then if you need you can start the local chain directly by repeating the process from there itself.
Cheers
Vishal

Event is not getting triggered in the process chain

Hi,
We had a process chain which was triggered by an Event, and it was running fine until few days ago. So I removed the chain from schedule and re-scheduled it again with these details:
File load: every 2 hrs
Process chain setting
Immediate tab: start immediately
After event: "event name" and "parameter name" and periodic job: ticked
I activated the chain and scheduled it. But the event is not triggered and the chain does not start. I even tried to trigger the process chain manually in sm64 but the process chain did not start.
Can someone please tell me steps to automate the event triggering and also any setting that should be taken care off in the info package and the process chain.
Thanks In advance.
Ram

Hello Ram, to start your Process Chain by an event, then you need to maintain the Start process of the process chain.
Select "Direct Scheduling".
In the Change Selections, press After Event. Put your event name and parameter (if any). Also click on Periodic job.
Press Save. Then Activate and Schedule your process chain. All your processes should turn green.
To verify, right-click on the Start process and select Displaying Scheduled Job(s).... You should see a job called BI_PROCESS_TRIGGER in a Released status. You can click on the job and look at the start conditions.
When you go to trigger the event, use the same event name and parameter (if any) as in the start condition. Your process chain will then execute. To insure, use RSPC to view your process chain and press the Logs icon (last one at the top).
Does this help?

In a metachain local chain are not getting triggered

Hi Experts,
I have a transaction metachain which includes 12 local chains. My query is some of the local chains are not triggering. Can anybody please help me in resolving this issue. <<removed>>
Regards
Sampada
Edited by: kishan P on Jan 10, 2012 5:10 PM

Hi ,
I dont see any reason why Process chain is not getting triggered . Just check the Metachain in change mode and activate it again .
Also please check display variant in all of the Local Process chains .It should be using metachain .
2. Can you please check the status of the Previous local Process chains and check the status of the same in tables RSPCPROCESSLOG , RSPCPROCESSCHAIN .The status should be successfully finished .
Hope it helps .
Thanks
Kamal

Search Incremental Crawl is not getting triggered at the scheduled time.

Hello All,
Since 1 week i am observing that the incremental crawl is not getting triggered on the scheduled day & time but the next schedule is moving to next day. Let me put down in a detail.
Content Incremental crawl is scheduled to run daily at 5.00 PM CST. Last 3 days i checked at 5.30 PM CST and found that the incremental crawl is not triggered and the status is Idle. But i noticed that the Next incremental crawl date is moved to next day
at the same time.
Can some one help me out how to get out of this issue. Thank You!

Hi,
Did you check the crawl logs? Please post here any error message that you come across in Crawl logs.
Also, does crawl operations are performed when you crawl manually?If yes, have a look at steps below:
Possible Cause:
Folder %WinDir%\Tasks is not added with SharePoint Local group WSS_WPG Where Indexer is Running
Resulution:
1. Login to the SharePoint Indexer machine with account which has Administrative previlages
2. Open Command prompt and run the command attrib –s %windir%\tasks.
%Windir% is the Default installation of Windows
3. Open Windows Explorer and go to the %Windir%\Tasks folder And open the properties of the Tasks folder
4. Click the Security tab and Check whether we have WSS_WPG, If it is not there Add the Group with Full Read and Write permissions
5. Now Open IIS Manager and restrat IIS or at the command prompt Type IISRESET so that the Chages will take place.
6. From the command prompt Run the command attrib +s %windir%\tasks so that the view goes back to default
7. Do the above Steps on all the SharePoint servers in the Farm
Ref: http://blogs.msdn.com/b/vrajas/archive/2012/02/08/moss-2007-schedule-crawls-are-not-starting-automatically.aspx
Hope it helps!
Thanks,
Avni Bhatt
If this helped you resolve your issue, please mark it Answered

Alert is not getting triggered in QA

Hai Experts!
i have transported the Alert Classification and Alert Category from development system to Quality system and i created the alert rule in QA. Now alerts mails are not tiggering. In se30 i have excecuted the RSALERTTEST that time i am getting a mail in the alert inbox and also to my mail box but for a real time data alert is not getting triggered.
Pls help me to solve this issue.
Regard's
Preethi

Hi
Schedule send job
please see as
help.sap says
Send Job
E-mails sent from an SAP application are first stored in a queue. A periodical background process, the SAPconnect send job, gets the e-mails from this queue and sends them over the Internet. To schedule this job in SAPconnect: Administration, proceed as follows:
i.         Choose View ® Jobs.
ii.       If no other job has been scheduled, choose Job ® Create.
iii.      Enter a job name and confirm it.
iv.      Select the variant SAP&CONNECTALL by positioning the cursor on it.
v.        Choose Schedule Job.
vi.      Choose Schedule periodically.
vii.     Select the interval you require, such as 10 minutes.
viii.   Choose Create.
Refer this.
http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm

Schedule lines are not getting generated during MRP Run

Schedule lines are not getting generated during MRP Run. I have maiantained source list for the material with proper validity date and also maintained scheduling agreement . MRP relevvant Indicator , I have marked - 2 which means -Record relevant to MRP. Sched. lines generated automatically.
Still I am not able to get schedule lines and instead of that *Purchase Requisitions* are getting generated.
Can any one help me and suggest me what to be done in this case .
Thanks & Regards ,
Nirmalya

Dear,
Welcome to SDN,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.
Regards,
R.Brahmankar

Alerts not getting triggered from Adapter Framework

Hi,
I have done the following steps for the Alerting:-
1. In configuration of RWB, activated monitoring for XI integration server & XIAdapterFramework and set the monitoring level to 'HIGH'.
2. Scheduled the Report 'SXMSALERT_PROCESS_DATA_GET' on ABAP stack.
3. In the 'further settings' link in End-to-End monitoring, activated the monitoring and set the frequency.
4.Created an alert category using t-code 'ALRTCATDEF' and assigned fixed users(myself) to it.
5.Defined an alert rule with '*' in all conditions and 'No restrictions' for the question 'Where did the error occur'.
Finally after all the steps:-
I am able to receive the alerts in the inbox -
a) by running the test report 'RSALERTTEST'
b) from a control step in BPM.
However, alerts are not getting triggered for an error in the Adapter Framework. (an exception in the Adapter Channel)
When i debugged the SXMSALERT_PROCESS_DATA_GET report, there was step where it was looking for process instances in table 'SSPICSPRHD' which was empty and the alert error log said -
 No process instances found for process type ID: 26460B43EB934C4C9ABBE9627380A89E ( XIDomain: domain.00.hqdvsapxi01 )
Any help/hint is welcome !!!
Thanks & Regards,
Renjith.

Hi,
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1382. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
I think this blog will be of help to you..
Cheers,
Divya

Workflow not getting triggered from Action definition in CRMD_ORDER

Hello Experts,
I have created a workflow which should send mail to partner team in a Change Request.This workflow should be triggered when a particular Zaction is performed on the CR.Zaction is created properly and my workflow is also assigned to it.I have also followed OSS note-733675 and created a workflow container with name "BUSINESSOBJECT" to get the application data into my workflow when the action is performed.My workflow is a background processing one.
I have tested it separately by providing GUID foreground and it works perfectly fine and mail is sent to partner team.But when i perform the action,mails are not getting triggered nor the workflow.I am not even able to check the logs.I am not even able to know if all the action has triggered my workflow.Kindly help.Would appreciate your contribution.
Regds
VLP

Please check in SWI2_FREQ whether the Workflow is really getting triggered.
Thanks
Arghadip

/BDL/TASK_PROCESSOR not getting triggered in satellite system from Solman

Hi,
We have scheduled EWA report in Solution Manager for one of the satellite system.
Solution Manager has sudddenly stopped creating of job /BDL/TASK_PROCESSOR0000002218 (ie job which is created immediately as EWA is scheduled in Solution Manager)
/BDL/TASK_PROCESSOR is running correctly and on hourly basis in satellite.
The EWA report is getting generated in Solution Manager after long time and without job /BDL/TASK_PROCESSOR0000002218 (is sessin specific job) being triggered.
Kindly help.
Regards,
Trupti M

Hi Paul,
My problem is solved.
Actually the Task: EarlyWatch Alert for Solution Manager under 'To Do' view of sdccn of satellite system was somehow getting scheduled as Back dated(ie instead of 30.04.2020 it was getting scheduled at 28.04.2010)
Due to this when we would do 'Start now' for the Task 'EarlyWatch Alert for Solution Manage' it was not getting triggered.
So I manually did refresh session which was mentioned under steps for manully sending data to SolMan under solution_mamanger tcode.
Due to this job BDL/TASK_PROCESSOR0000002237 got created.After this job got completed Task ''EarlyWatch Alert for Solution Manager ' got automatically generated.
I back dated the date for Task ''EarlyWatch Alert for Solution Manager" and started it.
Due to this the job /BDL/TASK_PROCESSOR0000002238 got created in satellite system for sending data to SolMan (This was not happening earlier.)
Extract from Solution_Manager tcode when scheduling:
When the Session Refresh task has been processed, a new task with the appropriate session type and session number appears in the To do view. This task collects and sends the data for your session. If a new task does not appear, search in the task-specific log for errors that ocurred during the Session Refresh task and make any necessary corrections.
To start the task immediately, select it and right-click to call up the context menu.
Choose Start Now. When the task has been processed successfully, it appears in the Done view. The data has been sent to your SAP Solution Manager system. You can check this in the task-specific log.
Thanks for all your help. Hoping my post will also be helpful for others.
Regards,
Trupti M

Workflow not getting triggered on status change

Hiii Everyone
Workflow is not getting triggered whenever I change the status of the Order (Lead). When we create a lead a workflow is triggered.
1. If the status is Open a mail is sent.
2. Then the status is checked for in process. And whenever the status is changed to inprocess it is assigned to the agent by the rule attached to the workflow.
3. And again when the status is changed to sanctioned a mail is sent.
Now problem is if I create a lead and change its status to inprocess and then save , then the mail is sent and it is assigned to the agent properly. But when I change the status to sanctioned , then the mail is not sent for sanctioned(i.e. no worklfow step is shown in swel).
If I open the lead and save it then the mail is sent properly. But then after that when I change the status to inprocess, the workflow is not showing agent assignment (jn swel).
Summary: Whenever I cahnge the status after saving the order , the workflow is not showing any further step .
Please suggest the solution.
Regards
Shafali

Hi,
Your workflow has been triggered when the status is open and then when change the status to in process,it is not sending mail as there is no agent assignment.
That means, workflow triggered, but it is not going to the next step.
Is it a standard or custom one?
Can you post the workflow log screenshot over here?
Cheers,
Raja.D

UNCAUGHT_EXCEPTION with msg CX_RSR_X_MESSAG while scheduling Process chain

Hi Gurus,
We are facing a short dump while scheduling process chains, as follows:
 
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_RSR_X_MESSAGE
 
Error analysis
 An exception occurred which is explained in detail below.
 The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
 and
 therefore caused a runtime error.
 The reason for the exception is:
 No text available for this exception
 
Information on where terminated
 Termination occurred in the ABAP program "SAPLRRMS" - in "RRMS_X_MESSAGE".
 The main program was "RSPC_MAINTAIN_SINGLE ".
 In the source code you have the termination point in line 82
 of the (Include) program "LRRMSU13".
 
We tried to schedule it as a remote process chain from some other system it cancelled the job there with an ERROR_MESSAGE. We checked the RFC Connections at the source system side but it is working properly. We then tried to schedule the chain manually, we had this exception. Then we tried to have a look at previous logs of the process chain. It had this exception. We tried to reactivate the chain it was successful but when tried to schedule the chain same issue again. We tried to run the Meta chains under the same chain separately. They too gave us the same exception.
Please help.
Regards,
Sourabh Deo

S Simran wrote:
Hi,
>
> Ours is a fresh installation..
>
> When i am loading for the first time till PSA it is successful..
>
> As HR data sources are 3.5 datasources, i am loading cube via infopackage..
>
> When i start the load to cube it is giving me dump with exception CX_RSR_X_MESSAG.
>
> i checked note 615389 which talks about "buffering of number range object BIM9999998". the 0REQID is not buffered, but it does not throw any error msg in RSRV to correct the error..
>
> and one more note 1157796 which talks about patches with version BI 7.0.
>
> Now we are in BI 730 with heighest level 0005.
>
> Not sure how to solve this error
>
> Any ideas?
What's your SP? Are you having any master data updates left unattended? Check the Master data objects, check the flows. Related SAP Notes : 914304 / Check 967202(SP10) and 998673(SP11), 1157796, 763203 and 615389
Edited by: Arun Bala G on Feb 12, 2012 9:50 PM

Modifiying, Transporting and Scheduling Process Chain

Hello ALL,
i have to create a new process chain for a delta Load and put this process chain in a big existing Meta Chain, after i have to transport to Quality System.
if i control the difference between Dev and Quality system to have an idea i see that the Infopackages in Dev have the execution tab: Load Data Immediately without job: BI_BTCH
in Quality some Infopackages have execution tab: run successively in batch with job like this:
BI_BTCH LX6CW08S1ICM04I4O06KOPL
can you tell me please in detail how should i complete this activity:
- wich type of control should i do before creating and modifiying process chain in DEV and Quality
- how should i do to control in Quality the scheduling of a process chain
- if i modify a process chain in DEV and after i will transport in Quality what will be the affect in Scheduling, the scheduling will be the same without problem or i have to schedule again
- in generale how can i schedule a process chain, wich transaction and how in detail
Thanks a lot for your help
Bilal

Hi Bilal,
1) EVENT: When you want to have a process chain 'A' to be started after completion of a process chain 'B' or any process in process chain 'B' we can use this event. These two chains can also be from different BI systems. Like Chain 'A' could be from one production system and Chain 'B' could be from different production system. As soon as the chain A finished an event will be triggered and this event will trigger the chain B. The start time of chain B might differ because it depends on the completion of chain A. To schedule a process chain using an event, Go to Tcode: RSPC look for your chain. Switch to change mode. Right click on the start variant and select maintain variant. Click on "change selections. click on "after event," give the event name in the slot and select the periodic job.
2) RUN JOB PERIODICALLY: When you want to have the chain run for more than once periodically we select this option. Suppose, chain B has to run after completion of chain A periodically we have to use this option. If you do not check this option, your chain B will run only once when the event is triggered after completion of Chain A. From the next time onwards, it not run even the event is triggered.
3) JOB: For every process when it runs a job will be created assainging it to a work process in the system. Similarly, when the chain starts a job will be created containing the log of the run. Also, in the scheduling options of a process chain, you can have your process chain started after completion of a particular job in the system (ex: an attribute change). For this, Go to Tcode: RSPC look for your chain. Switch to change mode. Right click on the start variant and select maintain variant. Click on "change selections. click on "after job" give the job name in the slot and save the settings.
4) SCHEDULING PROCESS CHAIN: Means to make settings to a process chain so that it will run on a periodic basis at a certain time. If you want to start a chain immediately, you will choose the option immediately and trigger it. It will run for only once. But, if you want to have your chain run everyday at 7:00 am in the morning, you have to schedule it using the scheduling options as below:
In Tcode: RSPC look for your chain. Switch to change mode. Right click on the start variant and select maintain variant. Click on "change selections." Click on Date/Time button. Give the start date and time in the Scheduled Start slots. (Ex: 09-04-2009, 7:00, to have the chain run at 7:00 everyday starting from tomorrow). Tick the check box Periodic job in the bottom and click on "periodic values" button and select the option as daily and save it. Then click on "Restrictions" button to specify the factory calander. The Tcode for calander is SCAL, where you can see all the factory calanders in the system and you can choose that suits your requirement. Save the changes and navigate back to process chain maintaince screen and click on "Schedule" button.
Now your chain is automated for trigger

Scheduled process chain not getting triggered properly

Similar Messages

Maybe you are looking for