Scheduled process flows are not running automaticaly-OWB database clonning

What I did:
1.     Cloned the entire OWB repository database from live (bidb01.bh.xyz.com) server to new (green1.bh.xyz.com) server.
******     Source     New
Physical Hostname     bidb01.bh.xyz.com     green1.bh.xyz.com
DB Logical Hostname     xyzbidb      bidb-lh
Service Name     BIPROD     BIPROD
Listener Port     1521     1521
Oracle Home of RDBMS     /app/oracle/home/product/10.2.0     /orabidb/oracle/product/10.2.0
Oracle Home of OWB     /app/oracle/home/product/10.2.0/owb /orabidb/oracle/product/10.2.0/owb
2.     Followed the Metalink Note 434272.1 (How To Update Warehouse Builder After A Database Cloning)
Issue:
Before doing the step-2, every time we put the new database up the normal process flows which run every day (10 AM, 1 AM , 2 AM , 2 PM, etc.) got executed on the production environment and hung the original processes that are being run on the production environment.
After following the note 434272, scheduled process flows in production is working fine but in the new server it is not at all working.
Could anyone please help me to fix this?
Edited by: Padmanaban G on May 7, 2010 5:15 PM

The issue was resolved by renaming the workflow. What is learned here is, we should not have same workflow name for two different workspace.

Similar Messages

Process flows are not running in OWB

I have a process flow which has a main process and this main process calls 3 subprocesses and 1 externel process. This workflow was running fine and it suddenly stopped working and when I try to run it from WF monitor it is giving the following error.
Activity CALWINDW_INC_LOAD_PF_WE
Result Exception
Error Name -20001
Error Message ORA-20001: Task CALWINDW_INC_DELETE_PF does not exist. Please check that the ProcessFlow has been deployed successfully. ORA-01403: no data found
Error Stack Wf_Engine_Util.Function_Call(WB_RT_WORKFLOW_UTIL.EXECUTE_TASK, CLWNPKG, 200509200915, 37461, RUN).
I tried running it from OWB deployment manager but it didn't work.
I have checked all the process flows and the mappings all are deployed and all the mappings are running sepreatly. I tried dropping and deploying the process flow again and it deployed successfully without any error. We have tried rebooting the server, creating new PF location and new process flows, but nothing worked out. Becuase of this issue we can't run the whole process. Any help will be appriciated please.

May be your chain was in the wait at the scheduled time, as there were no adequate processes available at the app server to take up your job.
Check with your Basis ( and also your users ); about the optimal time to schedule the job and reschedule your jobs.
Ravi Thothadri

[solved] To display Processes which are not running from constant process

i have constant processes prostat1,prostat2,prostat3,prosta4,prostat6,prostat8,prostat9 (6 processes) runs to support the application
Now my problem is
i want to display the process which is not running (from the above 6 processes)
Thanks in advance

Try this
echo "Constant processes not running"
echo
for PROC in prostat1 prostat2 prostat3 prostat4 prostat6 prostat8 prostat9
do
        if [ ! "`ps -ef | grep $PROC | grep -v grep`" ]; then
                echo $PROC
        fi
doneBTW, those are 7....:-)

Process chains are not running in a given time.

Hi BI Experts, Good afternoon.
Daily we are running the process chains in the night time. And the first process chain starts at 22:30(master data loading).
But from 5 days onwards, our process chains are running in the morning time around 10AM.
We informed to our BASIS team but they could not do anything.
What may be the problem.
Can anyone tell me the solution?
Thanks in advance
Anjali

May be your chain was in the wait at the scheduled time, as there were no adequate processes available at the app server to take up your job.
Check with your Basis ( and also your users ); about the optimal time to schedule the job and reschedule your jobs.
Ravi Thothadri

OID is up & running but "ldap" process are not running

Hi all,
Oracle Internet Directory is up & running but LDAP processes ( Not Running ---- Process oidmon
Not Running ---- Process oidldapd
Not Running ---- Process oidrepld
Not Running ---- Process odisrv) are not running.
I am trying to configure SSO for reverse proxy server and ran the command ssocfg.sh https proxyServerName proxyServerPort
and when i am trying to go for next step that is ldapmodify -D cn=orcladmin -w welcome1 -v -f setdasurl.ldif
it is showing up cannot connect to LDAP server. and also when i am trying to acess SSO admin Server the redirection url is showing up with 404 page not found error.
pls help me
Thanks

Do 'oidctl status' and check if the 'oidldapd' is up and running. If not, start 'oidmon' by executing the command 'oidmon start'.
To start 'oidldapd', use 'oidctl' command.
Eg: oidctl connect=<sid_name> server=oidldapd instance=<instance_num> start
Sometimes, when you start 'oidmon', the 'oidldapd' process is also started. So, its a good idea to do 'oidctl status' after 'oidmon start'

Scheduled jobs are not running DPM 2012 R2

Hi,
Recently upgraded my dpm 2012 sp1 to 2012 R2 and upgrade went well but i got 'Connection to the DPM service has been lost.(event id:917 and other event ids in the eventlog errors ike '999,997)'. Few dpm backups are success and most of the dpm backups consistenancy
checks are failed.
After investigating the log files and found two SQL server services running in the dpm 2012 r2 server those are 'sql server 2010 & sql server 2012 'service. Then i stopped sql 2010 server service and started only sql server 2012 service using (.\MICROSOFT$DPM$Acct).
Now 'dpm console issue has gone (event id:917) but new issue ocurred 'all the scheduled job are not running' but manully i can able to run all backup without any issues. i am getting below mentioned event log errors
Log Name: Application
Source: SQLAgent$MSDPM2012
Date: 7/20/2014 4:00:01 AM
Event ID: 208
Task Category: Job Engine
Level: Warning
Keywords: Classic
User: N/A
Computer:
Description:
SQL Server Scheduled Job '7531f5a5-96a9-4f75-97fe-4008ad3c70a8' (0xD873C2CCAF984A4BB6C18484169007A6) - Status: Failed - Invoked on: 2014-07-20 04:00:00 - Message: The job failed. The Job was invoked by Schedule 443 (Schedule 1). The last step to
run was step 1 (Default JobStep).
Description:
Fault bucket , type 0
Event Name: DPMException
Response: Not available
Cab Id: 0
Problem signature:
P1: TriggerJob
P2: 4.2.1205.0
P3: TriggerJob.exe
P4: 4.2.1205.0
P5: System.UnauthorizedAccessException
P6: System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal
P7: 33431035
P8:
P9:
P10:
Log Name: Application
Source: MSDPM
Date: 7/20/2014 4:00:01 AM
Event ID: 976
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer:
Description:
The description for Event ID 976 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The DPM job failed because it could not contact the DPM engine.
Problem Details:
<JobTriggerFailed><__System><ID>9</ID><Seq>0</Seq><TimeCreated>7/20/2014 8:00:01 AM</TimeCreated><Source>TriggerJob.cs</Source><Line>76</Line><HasError>True</HasError></__System><Tags><JobSchedule
/></Tags></JobTriggerFailed>
the message resource is present but the message is not found in the string/message table
plz help me to resolve this error.
jacob

Hi,
i would try to reinstall DPM
Backup DB
uninstall DPM
Install DPM same Version like before
restore DPM DB
run dpmsync.exe -sync
finished
Seidl Michael | http://www.techguy.at |
twitter.com/techguyat | facebook.com/techguyat

Running of process flow does not show any Active session in Database

Hi Team,
I am running a process flow in OWB 11g ( From Design Center ) which is having around 100 maps within it. However, from Control Center I can see the Process Flow is running ( i.e. Green check is visible beside the process flow) but when I run SQL query in backend database ; I am unable to see any running object ( i.e. OWB map name as package object) there corresponding to this Process Flow
I am running the below query to check the availability of running session :-
SELECT A.LOGON_TIME,A.SID,B.OBJECT_NAME,A.*
FROM gv$session A, dba_objects B
WHERE A.PLSQL_ENTRY_OBJECT_ID = B.OBJECT_ID
AND A.STATUS = 'ACTIVE'
Could you please suggest if this is something wrong in the development of the Process Flow or we can`t see any running map there in backend when we execute any process flow from OWB ?
Thanks in advance
Nilava Sen

Try below query
select sid,module,program,status,sql_id from gv$session where status='ACTIVE';
select * from gv$access;

Scheduled Brio/IR Jobs are not running as expected in EPM 11.1.2.2

Hi All,
We are observing some scheduled jobs are not running as expected,they are not running on the scheduled time.
Given below are more details.
We have 2 Jobs running at 6:00 AM daily based on single Recurring Time Event and it is observed that this jobs are not running on time(ex: 6:06 AM EST).
I tried verifying Consolidate Job Status in workspace admin options and the v8_RecurtimeEvent table for any miss in the 'Next Run Time',
but they were having the scheduled date/time of run.No clue from EPM Logs.
Interesting observation is the same jobs are running after updating the schedule time a little bit further(ex: 6:06 AM to 6:07 AM),but again after some days
the updated job(6:07 AM ) will stop running.
Thanks,

Put the IR job logs in TRACE:32 mode which will give more information in the logs . Refer this document link to put in TRACE mode :http://docs.oracle.com/cd/E17236_01/epm.1112/epm_install_troubleshooting_1112200.pdf
Thanks,
KK

Golden gate extract and replicate process are not running.

All,
I am trying replicate data between two oracle databases using golden gate.
I am trying this scenario in a single machine(two databases and golden gate are on same windows machine)
1. I have two databases PROD, UAT both are running on 11.2 oracle home.
2. Created the ggate user both the databases, and enabled supplemental logging.
3. Ran the following scripts in both databases.
SQL> @marker_setup.sql
SQL> @ddl_setup.sql
SQL> @role_setup.sql
SQL> grant GGS_GGSUSER_ROLE to ggate;
SQL> @ddl_enable.sql
4. Connected the source database (PROD) in ggsci prompt
GGSCI (home-c07402bbc5) 79> add extract ext1, tranlog, begin now
add exttrail C:\app\Bhanu\Goldengate\lt, extract ext1
edit params ext1
EXTRACT ext1
USERID ggate@PROD, PASSWORD 123456
RMTHOST home-c07402bbc5, MGRPORT 7840
rmttrail C:\app\Bhanu\Goldengate\lt
ddl include mapped objname bhanu.* // bhanu is a schema in PROD database.
TABLE bhanu.*;
5. Connected the target database(UAT) in ggsci prompt
add checkpointtable ggate.checkpoint
edit params ./GLOBALS
GGSCHEMA ggate
CHECKPOINTTABLE ggate.checkpoint
add replicat rep1, exttrail C:\app\Bhanu\Goldengate\Mt,checkpointtable ggate.checkpoint
edit params rep1
replicat rep1
ASSUMETARGETDEFS
userid ggate@UAT, password 123456
discardfile C:\app\Bhanu\Goldengate\rep1_discard.txt, append, megabytes 10
map bhanu.*, target kiran.*;
After that started the extract, replicat using
start extract ext1, start replicate rep1
Now the status.
GGSCI (home-c07402bbc5) 103> info all
Program Status Group Lag Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED EXT1 00:00:00 00:11:43
REPLICAT STOPPED REP1 00:00:00 00:21:16
Can you please help me what is wrong in my setup and why extract and replicate process are not running.
Edited by: user12178861 on Nov 19, 2011 11:22 AM

Thanks for your quick reply.
I have done few changes but extract, replicate process not running.
couple of points I would like to share with you regarding my setup.
1. I am using single golden date instance to replicate the data between PROD and UAT databases.
2. GGSCI (home-c07402bbc5) 1> dblogin userid ggate@PROD,PASSWORD 123456
Successfully logged into database.
GGSCI (home-c07402bbc5) 2> info all
Program Status Group Lag Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED EXT1 00:00:00 01:23:29
REPLICAT STOPPED REP1 00:00:00 01:33:02
GGSCI (home-c07402bbc5) 3> VIEW REPORT EXT1
ERROR: REPORT file EXT1 does not exist.
GGSCI (home-c07402bbc5) 4> start er *
Sending START request to MANAGER ...
EXTRACT EXT1 starting
Sending START request to MANAGER ...
REPLICAT REP1 starting
GGSCI (home-c07402bbc5) 5> VIEW REPORT EXT1
ERROR: REPORT file EXT1 does not exist.
GGSCI (home-c07402bbc5) 6> info all
Program Status Group Lag Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED EXT1 00:00:00 01:24:10
REPLICAT STOPPED REP1 00:00:00 01:33:44
Target :
GGSCI (home-c07402bbc5) 1> dblogin ggate@UAT,PASSWORD 123456
ERROR: Unrecognized parameter (GGATE@UAT), expected USERID.
GGSCI (home-c07402bbc5) 2> dblogin userid ggate@UAT,PASSWORD 123456
Successfully logged into database.
GGSCI (home-c07402bbc5) 5> add replicat rep1, exttrail C:\app\Bhanu\Goldengate/lt,checkpointtable ggate.checkpoint
ERROR: REPLICAT REP1 already exists.
GGSCI (home-c07402bbc5) 6> delete replicat rep1
Deleted REPLICAT REP1.
GGSCI (home-c07402bbc5) 7> add replicat rep1, exttrail C:\app\Bhanu\Goldengate/lt,checkpointtable ggate.checkpoint
REPLICAT added.
GGSCI (home-c07402bbc5) 8> edit params rep1
GGSCI (home-c07402bbc5) 9> start er *
Sending START request to MANAGER ...
EXTRACT EXT1 starting
Sending START request to MANAGER ...
REPLICAT REP1 starting
GGSCI (home-c07402bbc5) 10> info all
Program Status Group Lag Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED EXT1 00:00:00 01:29:46
REPLICAT STOPPED REP1 00:00:00 00:00:48
3. Is mandatory that I need two golden gate instances running each side ?
Thanks for spending your time on this problem.

Help with scheduling Process Flows in Workflow in 10gR2

Dear All
I am after some help with the scheduling of process flows (PF) in Workflow in OWB 10gR2. I am trying to set up some PF’s to handle the refresh of some staging tables from various source systems. I have created a separate Process Flow Module for each source systems, mainly just to keep them separate and organised. I have a number of mappings which all run fine if execute manually or linked directly to a schedule/job. The problem I am encountering is when I try to run process flows from schedules. I have created process flows ok and have run them manually and they complete fine so I know that the content of the PF is ok. After linking and deploying the jobs I can never get all the process flows to run from the various schedules. What appears to happen is that the first PF works ok and any other PF that are within the same Process Flow Module/packages also runs ok even if its running off as different schedules. However PF’s under the other Process Flow Module fail with the following error
CC_DAILY_0400
Description :
Runtime User : OWBRT_USER
Started : 2006-08-31 04:00:00.0
Status      Log
Error      ORA-20002: 3114: Activity 'PACK_1/CC_DAILY_0400' is not a process.
ORA-06512: at "OWF_MGR.WF_ENGINE", line 3920
ORA-06512: at line 1
Following this error the PF will not even run manually! If I then stop the schedule and either drop or replace this failed PF thus redeploying, the PF then runs fine manually and if the restart the schedule it runs ok the next evening. My problem is that this then appears to impact on the other PF’s which all though have not been touched and ran ok the previous evening they then fail the following evening with the same error
WS_DAILY_2400
Description :
Runtime User : OWBRT_USER
Started : 2006-09-01 00:00:01.0
Status      Log
Error      ORA-20002: 3114: Activity 'PACK_1/WS_DAILY_2400' is not a process.
ORA-06512: at "OWF_MGR.WF_ENGINE", line 3920
ORA-06512: at line 1
ORA-20002: 3114: Activity is not a process.
I basically can not get both sets to run even though they are on separate modules and separate schedules.Has anyone any idea as to what could be wrong or if I am setting something up in a strange way which would cause these symptoms.
All help or advice greatly appreciated
Regards Kevin

Dear All
I am after some help with the scheduling of process flows (PF) in Workflow in OWB 10gR2. I am trying to set up some PF’s to handle the refresh of some staging tables from various source systems. I have created a separate Process Flow Module for each source systems, mainly just to keep them separate and organised. I have a number of mappings which all run fine if execute manually or linked directly to a schedule/job. The problem I am encountering is when I try to run process flows from schedules. I have created process flows ok and have run them manually and they complete fine so I know that the content of the PF is ok. After linking and deploying the jobs I can never get all the process flows to run from the various schedules. What appears to happen is that the first PF works ok and any other PF that are within the same Process Flow Module/packages also runs ok even if its running off as different schedules. However PF’s under the other Process Flow Module fail with the following error
CC_DAILY_0400
Description :
Runtime User : OWBRT_USER
Started : 2006-08-31 04:00:00.0
Status      Log
Error      ORA-20002: 3114: Activity 'PACK_1/CC_DAILY_0400' is not a process.
ORA-06512: at "OWF_MGR.WF_ENGINE", line 3920
ORA-06512: at line 1
Following this error the PF will not even run manually! If I then stop the schedule and either drop or replace this failed PF thus redeploying, the PF then runs fine manually and if the restart the schedule it runs ok the next evening. My problem is that this then appears to impact on the other PF’s which all though have not been touched and ran ok the previous evening they then fail the following evening with the same error
WS_DAILY_2400
Description :
Runtime User : OWBRT_USER
Started : 2006-09-01 00:00:01.0
Status      Log
Error      ORA-20002: 3114: Activity 'PACK_1/WS_DAILY_2400' is not a process.
ORA-06512: at "OWF_MGR.WF_ENGINE", line 3920
ORA-06512: at line 1
ORA-20002: 3114: Activity is not a process.
I basically can not get both sets to run even though they are on separate modules and separate schedules.Has anyone any idea as to what could be wrong or if I am setting something up in a strange way which would cause these symptoms.
All help or advice greatly appreciated
Regards Kevin

How to schedule Process Flow in OWB10gR2 ?

Hi,
I have a mapping and a corresponding process flow that has the mapping within. Both the mapping and process flow are deployed successfully and they also execute successfully when executed from control center.
Now I want to run the process flow daily at 4 am in the morning. I have created a schedule and defined the parameters. Then for the process flow, I have added the schedule to the "Referred Calander". Then in control center I got a new object with _JOB as suffix. I deployed that as well and that was successfull. This implies that I have now a job that is scheduled to run daily at 4 am.
But the next day when I checked the target table that the mapping (wrapped in the process flow which in turn was scheduled to run at 4 am ) was supposed to insert some records, there was no record at all !!! Seemed to me that the job was not kicked off at all at the specified time.
I am using --
OWB client version : 10.2.0.1.31
OWB repository version : 10.2.0.1.0
Oracle Workflow Version : 2.6.4.0.0
Database version : 10g Enterprise edition release 10.2.0.1.0
Does anyone have any idea how do I make this arrangement running?
Regards,
Swagata

Chino -
Once you start the job, do you have to leave the "Job Details" window open in order for teh scheduled task to run?
thanks for the help ....
txb

Problems scheduling process flow

Using OWB I have create a number of mappings and also a process flow using the defined mappings. All the mappings and the process flow are successfully deployed and can be executed without problems from Deployment Manager. I can even successfully execute my process from OS command line using the sqlplus_exec_template.sql file :
sqlplus vlad_proiect/vlad@proiect @F:\Oracle\OraWB92\owb\rtp\sql\sqlplus_exec_template.sql vlad_runtime ORACLE_WORK_FLOW PROCESS INCARC "," ","
where :
vlad_proiect/vlad my user name and passwd
proiect my database SID
vlad_runtime is the Runtime Repository owner
ORACLE_WORK_FLOW is the location of the process flow
INCARC is the process name.
I tried to do the same thing using OEM. I followed the example
http://otn.oracle.com/products/warehouse/htdocs/oem_scheduling_viewlet_swf.html
and the indication from WB User guide chapter Scheduling Mappings and Process Flows (13-19) but the scheduled job fails with the following reason :
VNI-2015 : The Node preferred credentials for the target node are either invalid or do not have sufficient privileges to complete the operation.
On Windows platforms, the Node credentials specified for the Windows target should have the "Logon as a batch job" privilege.
I have created the job as follows:
Tab General
Job name: TEST
Selected target: Proiect
Tab Tasks
Tasks: Run SQL*Plus script
Tab Parameters
Parameters: vlad_runtime ORACLE_WORK_FLOW PROCESS INCARC "," ","
Override preferred credentials: checked
User name: vlad_runtime_acc the Runtime Repository access user
Password: vlad the Runtime Repository acc user passwd
I have imported the script oem_exec_template.sql
And in the Preferred credentials (from Configuration->Preferences->Administrator preferences) I set :
Database : Proiect with user vlad_proiect and my passwd.
Node : localhost with user vlad_runtime and his passwd.
Somewhere something is wrong set (or not set at all?) or ?

Razvan,
When OEM executes a scheduled job, it will logon to the node (i.e. your machine) as the user that is specified in the preferred credentials of OEM. That user (provided there is one... which is not necessarily default) is an operating system user and must have the 'logon as batch job' privilege. You can set this option (on Windows 2000) by going into control panel, administrative tools, local security policy, local policies, user rights assignment. Look for 'logon as batch job' and make sure the user being used to logon to the node has the privilege.
This setup is actually provided in the installation guide as well.
Hope this helps,
Mark.

Scheduling process flows and mappings

Hello
I have created many process flows. Now i want to schedule it. I know i can use OEM, but i need to log in as DBA. i also know that you can use owb scheduler module to schedule a process flow. but i want to schedule it using sql plus. i found a link on scheduling process flow in sql plus for older versions of OWB. Can we use the same script for OWB 10.2? here is the link - http://www.dba-oracle.com/oracle_news/2005_7_7_Scheduling_an_OWB.htm
Please let me know how to schedule a process flow in OWB 10.2 in sql plus. It would be great if you could post the sql script required to schedule OWB 10.2 process flows.
Thank You

Hi,
the web server named by the link is down, so a general answer.
You can use the scripts sqlplus_exec_template.sql and oem_exec_template.sql from the directory <OWBHOME>/owb/rtp/sql and schedule it with cron or at or scheduler or ...
Regards
Detlef

Processing Instructions are not allowed in SOAP documents

Hi, there. I am trying to integrate WS-Security into our server using the api-sample in JWSDP 1.6 as it is the one that fits into our current architecture in place.
I have the following code:
DOMSource domSource = new DOMSource( indoc );
SOAPPart soapPart = msg.getSOAPPart();
soapPart.setContent( domSource );
ProcessingContext context = new ProcessingContext();
context.setSOAPMessage( msg );
where indoc is an org.w3c.dom.Document object.
The last line throws an exception that is ultimately caused by:
java.lang.UnsupportedOperationException: Processing Instructions are not allowed in SOAP documents
at com.sun.xml.messaging.saaj.soap.SOAPDocumentImpl.createProcessingInstruction(SOAPDocumentImpl.java:109)
(Please find the complete (partially edited) stack trace at the end of this message.)
The exception is thrown even when the following very simple (unsigned) SOAP message is submitted:
<?xml version="1.0" encoding="utf-8"?><soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><soap:Body><requestMessage xmlns="urn:schemas-company-com:transaction-data-1.17"><merchantID>ever03</merchantID><ccAuthService run="true"/></requestMessage></soap:Body></soap:Envelope>
As you can see, the only processing instruction is the XML processing instruction, which I don't believe is disallowed in SOAP documents, right? So, I'm not sure why it's complaining about processing instructions. I'm guessing during the transformation into whatever form ProcessingContext wants the document to be in, certain processing instructions are erroneously being inserted.
I would appreciate any inputs. Below is the stack trace, partially edited to show only the relevant lines.
Thanks,
Ever
com.sun.xml.wss.XWSSecurityException: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Unable to create envelope from given source:
at com.sun.xml.wss.SecurableSoapMessage.getEnvelope(SecurableSoapMessage.java:109)
at com.sun.xml.wss.SecurableSoapMessage.init(SecurableSoapMessage.java:89)
at com.sun.xml.wss.SecurableSoapMessage.setSOAPMessage(SecurableSoapMessage.java:400)
at com.sun.xml.wss.ProcessingContext.setSOAPMessage(ProcessingContext.java:199)
Caused by: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Unable to create envelope from given source:
at com.sun.xml.messaging.saaj.soap.EnvelopeFactory.createEnvelope(EnvelopeFactory.java:111)
at com.sun.xml.messaging.saaj.soap.ver1_1.SOAPPart1_1Impl.createEnvelopeFromSource(SOAPPart1_1Impl.java:39)
at com.sun.xml.messaging.saaj.soap.SOAPPartImpl.getEnvelope(SOAPPartImpl.java:98)
at com.sun.xml.wss.SecurableSoapMessage.getEnvelope(SecurableSoapMessage.java:107)
... 32 more
Caused by: javax.xml.transform.TransformerException: java.lang.UnsupportedOperationException: Processing Instructions are not allowed in SOAP documents
at com.sun.org.apache.xalan.internal.xsltc.trax.TransformerImpl.transform(TransformerImpl.java:647)
at com.sun.org.apache.xalan.internal.xsltc.trax.TransformerImpl.transform(TransformerImpl.java:279)
at com.sun.xml.messaging.saaj.soap.EnvelopeFactory.createEnvelope(EnvelopeFactory.java:97)
... 35 more
Caused by: java.lang.UnsupportedOperationException: Processing Instructions are not allowed in SOAP documents
at com.sun.xml.messaging.saaj.soap.SOAPDocumentImpl.createProcessingInstruction(SOAPDocumentImpl.java:109)
at com.sun.xml.messaging.saaj.soap.SOAPPartImpl.createProcessingInstruction(SOAPPartImpl.java:368)
at com.sun.org.apache.xalan.internal.xsltc.trax.SAX2DOM.processingInstruction(SAX2DOM.java:177)
at com.sun.org.apache.xml.internal.serializer.ToXMLSAXHandler.processingInstruction(ToXMLSAXHandler.java:583)
at com.sun.org.apache.xalan.internal.xsltc.trax.DOM2TO.parse(DOM2TO.java:224)
at com.sun.org.apache.xalan.internal.xsltc.trax.DOM2TO.parse(DOM2TO.java:121)
at com.sun.org.apache.xalan.internal.xsltc.trax.DOM2TO.parse(DOM2TO.java:85)
at com.sun.org.apache.xalan.internal.xsltc.trax.TransformerImpl.transformIdentity(TransformerImpl.java:592)
at com.sun.org.apache.xalan.internal.xsltc.trax.TransformerImpl.transform(TransformerImpl.java:638)
... 37 more

Me again... I just realized my second post sounded like I had figured out the problem. No, I still have the problem. I just added the one line that I forgot to include in my original post.
I would sincerely appreciate any help.
Ever

Jobs in oracle are not running properly -

Hi
In my database i have some 10 jobs and they are running successfully but the next date is not getting updated to athe new interval. Because of that the jobs are not running furhter.
Is there any solution for this
Oracle 9.2.0.6
O/S linux
Rp

RAJ> @JOBS2
scheduled jobs
Last This Next Run
WHAT LOG_USER Job B fail Date Date Date Interval
DQ_UPDATION; DOTSOFT 124 N 0 11-NOV-08: 15:59:35 : 16-NOV-08: 15:59:35 5.00
P_SEND_PG_MAILS; DOTSOFT 250 N 0 14-NOV-08: 02:00:03 : 15-NOV-08: 02:00:00 1.00
PLRANL; DOTSOFT 83 N 0 14-NOV-08: 00:00:03 : 15-NOV-08: 00:00:00 1.00
P_MAIL_DIS; DOTSOFT 492 N 0 14-NOV-08: 00:00:03 : 15-NOV-08: 00:00:00 1.00
FRSJOBS; DOTSOFT 106 N 0 14-NOV-08: 00:00:03 : 15-NOV-08: 00:00:00 1.00
bill_net_os_details_proc; DOTSOFT 24 N 0 14-NOV-08: 00:00:03 : 15-NOV-08: 00:00:00 1.00
FRS_REPEAT_UPDT; DOTSOFT 674 N 0 14-NOV-08: 07:00:03 : 14-NOV-08: 15:00:00 .33
FRS_REPEAT_FAULT_UPDT; DOTSOFT 675 N 0 14-NOV-08: 07:00:05 : 14-NOV-08: 15:00:00 .33
portal_application; DOTSOFT 692 N 0 14-NOV-08: 07:02:01 : 14-NOV-08: 08:02:01 .04
an_printpack.an_process(sysdat DOTSOFT 532 N 0 14-NOV-08: 06:35:40 : 14-NOV-08: 07:05:40 .02
e-1,sysdate, 'DOTSOFT', 'D');
MONTHCRON; DOTSOFT 164 N 0 11-NOV-08: 15:59:35 : 11-DEC-08: 00:00:00 29.33
npc_scan_job; DOTSOFT 392 N 11 14-NOV-08: 00:00:03 : 15-NOV-08: 00:00:00 1.00
RECON_ALLPAID_PKG.RECON_ALLPAI DOTSOFT 228 N : : 18-NOV-08: 16:48:15
D;

Scheduled process flows are not running automaticaly-OWB database clonning

Similar Messages

Maybe you are looking for