Scheduled restart fails due to connected user

Hi
Here's another 'feature' Apple have added in Mountain Lion which is really irritating. Under Lion and previous if you scheduled a restart for a set time, you got a restart. Under ML, if any other pc or mac on my network has copied a file to or from my restarting machine since the previous restart, it cancels the restart because the restart will disconnect other users. I can understand why, in some circumstances, disconnecting another user would be a bad thing and why they have 'fixed' it. But for me it is just another pointless change which breaks something which worked well. They might at least have added another preference control in the energy saver/restart system pref to enable you to decide whether to disconnect users or not!
I can find various posts on line about ways to use Cron or launchd in the command line to do a forced restart (which I'm a bit nervous about, not least because none of them come with instructions about how to undo or edit what you did if it isn't effective), and various apps in the app store which need to be running 24/7 to do it, but nothing which really replaces the old pre-ML functionality.
Has anyone found a way round this irritation, please? And is there a feature request anywhere on Apple.com so I can bring this to apple's attention?
Thanks in advance for any help.

Hai i guess you previous change run have not completed fully wait and check in the joblog once its done restart it will solve your problem .Also be sure no other load is updating 0customer in some other master data chain.
sm12 solves but be careful if somebody else editing check it since its a shared object.
Goodday.
Edited by: SapBuddy on Aug 25, 2008 3:07 PM

Similar Messages

R12.1.1 upgrade driver failed due to OKC user connectivity (RHEL 5.9)

Hi Team,
I was in the middle of the R12.1.1 upgrade and the driver failed due to OKC user connectivity .
I have checked all the possibilities.
Please let me know how to proceed from here. Though I restarted the patch it is failing due to OKC user login denied.
Assigned: file as_accesses_n17.xdf on worker 1 for product as username APPS.
Assigned: file cnpln.odf on worker 2 for product cn username CN.
Assigned: file invtxhi.odf on worker 3 for product inv username INV.
Assigned: file mscplan.odf on worker 4 for product msc username MSC.
Assigned: file MSC_SYSTEM_ITEMS.xdf on worker 5 for product msc username APPS.
Assigned: file OKCDAUT.odf on worker 6 for product okc username OKC.
Assigned: file OKCDSUP.odf on worker 7 for product okc username OKC.
Assigned: file OKCOTH1.odf on worker 8 for product okc username OKC.
Assigned: file OKCPTY1.odf on worker 9 for product okc username OKC.
Assigned: file OKCREP1.odf on worker 10 for product okc username OKC.
Assigned: file OKCSHD1.odf on worker 11 for product okc username OKC.
Assigned: file OKCVARL.odf on worker 12 for product okc username OKC.
Assigned: file OKCXRPT.odf on worker 13 for product okc username OKC.
Connecting to OKC......Unable to connect.
AutoPatch error:
The following ORACLE error:
ORA-01017: invalid username/password; logon denied
occurred while executing the SQL statement:
CONNECT OKC/*****
AutoPatch error:
Error while evaluating "Check Object"
Telling workers to quit...
2 workers have quit. Waiting for 14 more.
12 workers have quit. Waiting for 4 more.
13 workers have quit. Waiting for 3 more.
15 workers have quit. Waiting for 1 more.
All workers have quit.
AutoPatch error:
Error running SQL and EXEC commands in parallel

user11962637 wrote:
Hi Srini,
Thank you for the update.
The password is working fine no issues with the connectivity from my end, but upgrade driver is failing with the same error.
sqlplus apps/apps
SQL*Plus: Release 10.1.0.5.0 - Production on Fri May 17 18:18:03 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> conn okc/okc
Connected.
SQL> conn system/crp2system
Connected.
SQL> exitThis will happen if you change the password using the ALTER USER command rather than using the FNDCPASS executable
Srini

Attribute Change run failed due to the User Lock

Hi Friends,
attribute change run has failed due to the user lock.
can any one tell me how to process and what is the main cause behind on this.
thanks in advance

if master data is loading at same time while the attr/hier change run is occuring,it cause the change run to fail.
Usually u get error message like..user ALEREMOTE has locked the MD tables..
Wait for some time and then try attr change run manually by going to rsa1->tools->apply hier/attr change..
if it still shows locked..try to see in rsmo if a MD load has got stuck..
else..see in sm12 to find lock is on which tables..
last resort..delete lock forcefully from sm12..
first option is wait for some time and give a try again..
cheers,
Vishvesh

BIEE Scheduler error - Failed to open connection to SMTP Server

I get the following error while runing an iBot.
nQSError: 75003 Failed to open connection to SMTP Server. Delivery to same user's Dashboard works fine. Warning is as shown below. Any help is greatly appreaciated. This is for internal customer.
==============================================
Eventually succeeded, but encountered and resolved errors...
Number of skipped recipients: 2 of 5
+++ ThreadID: 1264 : 2009-06-17 16:57:31.246
iBotID: /users/administrator/_ibots/Open Issue Alert
[nQSError: 75003] Failed to open connection to SMTP Server.
+++ ThreadID: 1264 : 2009-06-17 16:57:31.246
iBotID: /users/administrator/_ibots/Open Issue Alert
...Trying SMTP Delivery loop again
+++ ThreadID: 1264 : 2009-06-17 16:57:31.246
... Sleeping for 5 seconds.
+++ ThreadID: 115c : 2009-06-17 16:57:31.637
iBotID: /users/administrator/_ibots/Open Issue Alert
[nQSError: 75003] Failed to open connection to SMTP Server.
+++ ThreadID: 115c : 2009-06-17 16:57:31.637
iBotID: /users/administrator/_ibots/Open Issue Alert
...Trying SMTP Delivery loop again
+++ ThreadID: 115c : 2009-06-17 16:57:31.637
... Sleeping for 3 seconds.
+++ ThreadID: 115c : 2009-06-17 16:58:16.602
iBotID: /users/administrator/_ibots/Open Issue Alert
[nQSError: 75003] Failed to open connection to SMTP Server.
+++ ThreadID: 115c : 2009-06-17 16:58:16.602
iBotID: /users/administrator/_ibots/Open Issue Alert
...Trying SMTP Delivery loop again
+++ ThreadID: 115c : 2009-06-17 16:58:16.602
... Sleeping for 5 seconds.
+++ ThreadID: 1264 : 2009-06-17 16:58:18.414
iBotID: /users/administrator/_ibots/Open Issue Alert
[nQSError: 75003] Failed to open connection to SMTP Server.
+++ ThreadID: 1264 : 2009-06-17 16:58:18.414
iBotID: /users/administrator/_ibots/Open Issue Alert
...Trying SMTP Delivery loop again
+++ ThreadID: 1264 : 2009-06-17 16:58:18.414
... Sleeping for 8 seconds.
+++ ThreadID: 115c : 2009-06-17 16:59:03.614
iBotID: /users/administrator/_ibots/Open Issue Alert
[nQSError: 75003] Failed to open connection to SMTP Server.
+++ ThreadID: 115c : 2009-06-17 16:59:03.614
iBotID: /users/administrator/_ibots/Open Issue Alert
...Trying SMTP Delivery loop again
+++ ThreadID: 115c : 2009-06-17 16:59:03.614
... Sleeping for 8 seconds.
+++ ThreadID: 1264 : 2009-06-17 16:59:08.644
iBotID: /users/administrator/_ibots/Open Issue Alert
[nQSError: 75003] Failed to open connection to SMTP Server.
+++ ThreadID: 1264 : 2009-06-17 16:59:08.644
iBotID: /users/administrator/_ibots/Open Issue Alert
...Trying SMTP Delivery loop again
+++ ThreadID: 1264 : 2009-06-17 16:59:08.644
... Sleeping for 6 seconds.
+++ ThreadID: 115c : 2009-06-17 16:59:53.859
iBotID: /users/administrator/_ibots/Open Issue Alert
[nQSError: 75003] Failed to open connection to SMTP Server.
+++ ThreadID: 115c : 2009-06-17 16:59:53.859
iBotID: /users/administrator/_ibots/Open Issue Alert
Exceeded number of delivery retries.
+++ ThreadID: 1264 : 2009-06-17 16:59:56.687
iBotID: /users/administrator/_ibots/Open Issue Alert
[nQSError: 75003] Failed to open connection to SMTP Server.
+++ ThreadID: 1264 : 2009-06-17 16:59:56.687
iBotID: /users/administrator/_ibots/Open Issue Alert
Exceeded number of delivery retries.

You have a problem with your smtp parameters. Verify them. Here an article to see how you can do with telnet.
http://gerardnico.com/wiki/smtp_telnet
And here an article when you are sure of the parameters to configure delivers :
http://gerardnico.com/wiki/dat/obiee/bi_scheduler/obiee_scheduler_configuration_mail
Success
Nico

AD MA Large Group (9000+ users) export failing due to connectivity timeout:: cd-connectivity-error

I am currently implementing FIM 2010 in a test environemnt. I have MAs connected to the FIM Portal, an Oracle view, AD, and eDirectory 8.8SP6. All agents are working fine, users attribute flow is working great to all connected systems and groups are flowing
into the MV without issue. I have a few criteria-based groups in the FIM portal that I am synchronizing to AD. All but one of those groups is synchronizing correctly. The failing group contains by far the most members of any group I've attempted to export
so far, numbering around 9000 members. The only error I receive on an export run on the AD MA is "cd-connectivity-error" for the group object itself and the agent shows a run status of "dropped-connection." Event Viewer simply shows:
The management agent "Test Active Directory MA" failed on run profile "Export" because of connectivity issues.
Additional Information
Discovery Errors : "0"
Synchronization Errors : "0"
Metaverse Retry Errors : "0"
Export Errors : "1"
Warnings : "0"
User Action
View the management agent run history for details.
While 9000 members in a group is not insubstantial I can't help but feel like this should work. Are there configuration changes I need to make to AD in order to allow a longer timeout on the connection itself? I have tried increasing the timeout on the export
run profile without success. Any guidance would be greatly appreciated.
~Jeff

@Evgeniy Oddly enough, that is exactly the timeout change I made - 300 seconds. I am currently populating the group throung the FIM Portal. It's a criteria-based group. Basically I am taking every employee status type (we have ~12 of them) and I am creating
sub-groups for each. The largest one of these is the one I'm timing out on. The second largest one has ~2500 members and functions as expected. If I need to change this to provision with .dll code I certainly can - I was just hoping to provide some transparency
for our support staff and my fellow admins on these groups.
@Carol Good idea. I will do just that. I have 2 DC's isolated in a site with an exorbitantly high site link cost specifically to service our LDAP clients and other back end services. Those 2 DC's also happen to host the majority of our FSMO roles here as
well. I'll hardocde the link to one of those DC's and report back.
As a secondary question, would it be better perhaps if I simply used set transitions on the user accounts to individually add them to these groups? I don't plan on using employee status for any other functions beyond this one so it seems like it may be more
complicated to go that route but it may also be more stable.
Thanks for all the great replies! I'll keep you posted.

Scheduled Report Fails To Run If User Password Has Expired

Why can't a report, that has been scheduled for a user whose password has expired, continue to run and go to its predefined destinations?
A user doesn't know until he/she attempts to log in that there is a password expiration issue. They may have scheduled the report to go to a multitude of inboxes, but if their password has expired, the report doesn't run.
I can understand "some" issues with the necessity to stop the report until credentials are updated correctly. However, Business Objects doesn't notify a user until it has expired, thus making it too late for those expecting something in their inbox.
Is there any method of notifying users that their password is going to be expiring soon, in advance? In other words, is there any "proactive" feature within Business Objects for notifying the user of an upcoming need to change their password?
HepMe

There is nothing built in to BusinessObjects for this, but there may be third-party tools available or you can write code that would do this.
In Query Builder, run this query:
Select SI_ID, SI_Name, SI_LAST_PASSWORD_CHANGE_TIME, SI_UPDATE_TS, SI_LASTLOGONTIME
from CI_SYSTEMOBJECTS where SI_Kind = 'User' and SI_NAME != 'Administrator' and SI_NAME != 'Guest' and SI_PASSWORDEXPIRE = 1
order by SI_LAST_PASSWORD_CHANGE_TIME desc, SI_UPDATE_TS desc
Users who are new and haven't yet changed their password will not have a value for SI_LAST_PASSWORD_CHANGE_TIME, so you can use SI_UPDATE_TS to determine when they were created.
You could build an application that uses this query to determine who is getting close to password expiration and send out an email reminding those users to change their passwords.
-Dell

GPP Scheduled Task Fails in Group Policy Modeling depending on DC

We have multiple domain controllers running at a 2003 functional level.
We have 1 DC running Server 2003 x86 SP2 and the rest run Server 2008 (maybe R2)
I created a GPO that includes a Scheduled Task Group Policy Preference under Computer Configuration.
In order to test this I used Group Policy Modeling in the GPMC on a 2008 R2 Machine where I am editing Group Policy.
If I run the modeling (perform the simulation on the 2003 DC it fails. (Note I am modeling the GPO for a different computer, not the 2003 SP2 DC, I am running the modeling for a Workstation)
Information from the Component Status on the Summary Tab of the Modeling Report
Component Name Status
Group Policy Infrastructure Success
EFS recovery Success (no data)
Group Policy Scheduled Tasks Failed
Group Policy Scheduled Tasks failed due to the error listed below and failed to log resultant set of policy information.
Additional information may have been logged. Review the application event log on the domain controller on which the simulation was run for events between 2/28/2014 10:07:36 AM and 2/28/2014 10:07:36 AM.
Registry Success
Security Success
Info on the Settings Tab of the Modeling Report below.
An error has occurred while collecting data for Scheduled Tasks.
The following errors were encountered:
An unknown error occurred while data was gathered for this extension. Details: Invalid class
If I run the modeling using a 2008 DC to perform the simulation it works fine.
Per the instructions on the Summary Tab regarding the scheduled task failure I look at the event log on the 2003 domain controller and this is what i find.
The event I get on the 2003 DC is 8196 and I will place the details below.
Event Type:   Error
Event Source:           Group Policy Scheduled Tasks
Event Category:        Disk
Event ID:       8196
Date:              2/27/2014
Time:             4:48:47 PM
User:              NT AUTHORITY\SYSTEM
Computer:     <computername>
Description:
The client-side extension caught the unhandled exception '0xC0000005' inside: 'threadEntry : client main' See trace file for more details. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
So, should I be concerned that this is failing on the 2003 DC, does this mean that if my workstations authenticate to my 2003 DC that the preference will not process?
I was reading that in 2003 client side extensions were not there and can be installed, would this make the modeling succeed?
How do I get verified, I tried to post screenshots, but I could not. :(

Hi Jonathan,
As you have found the reason, I want to confirm whether the issue has been fixed.
In fact, for Windows Server 2003 to apply or process Group Policy Preferences settings, we must install client-side extensions of GPP for Windows Server 2003.
Although this is not related to this case, for your information, if our clients are Windows XP or Windows Vista, to use GPP, we must install client-side extensions for these
workstations respectively.
Regarding GPP, the following article can be referred to for more information.
Group Policy Preferences Getting Started Guide
http://technet.microsoft.com/en-us/library/cc731892(v=WS.10).aspx
Best regards,
Frank Shen

Connect failed due to dbsl

Hi gurus,
We are upgrading the test server.we face a problem.the error message is "connect failed due to dbsl load lib failure".
"cannot find the dll dboraslib.dll in path"
But dboraslib.dll in the Dir_executable path.
Please provide the solution.
regards
gunamoorthy d

you must check the system path or user path, not dir_executable.
try this:
start -> Run
CMD
set
you will see a list of parameters, check the values for PATH. you must have an entry equivalent to your dir_executable. if not, do this:
right click on MY COMPUTER
choose PROPERTIES
click on ADVANCED tab
click on button ENVIRONMENT VARIABLE
change PATH to add the needed path.
once this is completed, you will need to restart SAP services and close down all command prompts... then try again.

Connection AFW failed, due to: RecoverableException : SOAP Adapter.

Hi All,
We are using XI3.0 Sp14 . the message flow is
IDOC> XI> SOAP ADPATER (receiver side)--> External system.
Here everything is fine, we are using https URL of the extrnal system to send the cXML file on there side. The external URL is fine and working.
When we send the idoc from R/3 to XI. then it gives very common message. I dont know what is wrong with this message. .
Please check this , what I got in Audit log:
2007-04-16 10:14:03 Error Exception caught by adapter framework: null
2007-04-16 10:14:03 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
2007-04-16 10:14:03 Success The asynchronous message was successfully scheduled to be delivered at Mon Apr 16 10:19:03 EDT 2007.
2007-04-16 10:14:03 Success The message status set to WAIT.
I don't know why I am getting this error message. Please help me to resolve this. Thanks
regards
Ram Singhal

Hi,
For SOAP receiver adapter, you have the WSDL file from the provider of the webservice, either from a URL link or physically receiving the file.
The WSDL file contains the attribute "location" from the element "address", and the attribute "soapAction" from the element "operation". These 2 values must be entered exactly as is into the SOAP comm chan config.
Also, insure the proxy information are also entered correctly, include the userid/password if required. The webservice provider may also require authentication, so make sure it is also entered.
If possible, execute the webservice using a generic SOAP client tool to test. Use the exact configuration entries as those you used in XI. There are many free tools from the internet.
Regards,
Bill

TP error: connect failed due to DbSL load lib failure

Hi All,
I have prepared Quality system from Production system as System copy.I have upgarded Kernel from 620 to 640 in Quality system.
After Kernel upgrade , Server details are as below
Operating System : windows 2003 IA 64
Database : SQL server 2000 IA 64
Kernel :640 and compiled for 64 bit non unicode system ,
patch number is 43.
SAP : SAP R/3 4.7
Before kernel upgrade , server details are as below
Operating System : windows 2000 server
Database : SQL server 2000
Kernel :620 and compiled for Non unicode system ,patch number
is 1363
SAP : SAP R/3 4.7
I am able to transport request from Development to Quality . But when I try to import request from Quality I am getting error message "Connect failed due to DBSL Load lib failure"
Error message is " connect failed due to DBSL load lib failure
cannot find the DLL dbmssslib.dll in path( K:\usr\sap\NBQ\SYS\exe\run)
problem when loading DB-dependent DLLs."
I have set Environmnet variable ( DBMS_TYPE value as mss) for nbqadm user.
I have seen that dbmssslib.dll file is exist in exe/run path.
Does anyone having an Idea , how to resolve this issue.Pls help me
Thanks in advance
Regards
Venu

Hi ,
Thanks for all
Issue is resolved by myself.
Instead of update Kernel to 640 , I have downloaded latest 620 kernel patch on IA 64 .
Since my production server is running on x86 and 620 kernel , i have downloaded 620 kernel for IA 64 .
That resolved my issue.
Regards
Sai

LIS job failed due to server restart

Hi Experts,
One of out LIS jobs on queue MCEX11 is failed due to a system restart in ECC. What are the steps we need to take to make sure no data is lost or how we can confirm that there is no data loss due to this restart.
Regards
Jitendra

Hi Rama,
Please find attached screenshots from failed job, LBWQ & RSA7. Looking on them I guess there will be surely a data loss.
Failed Job
LBWQ
RSA7
Regards
Jitendra

Connection AFW failed, due to: Received HTTP response code 500

Hi,
I have tried to develop a file to file scenario in XI 3.0. The Sendor File adapter is reading the file but the message is not getting transfered to Integration engine.
The audit log for the message is as follows:
2005-05-07 04:10:24 Success Channel FileSendor: Send binary file "/tmp/xi_input.dat". Size 324 with QoS EO
2005-05-07 04:10:24 Success Application attempting to send an XI message asynchronously using connection AFW.
2005-05-07 04:10:24 Success Trying to put the message into the send queue.
2005-05-07 04:10:24 Success Message successfully put into the queue.
2005-05-07 04:10:24 Success The application sent the message asynchronously using connection AFW. Returning to application.
2005-05-07 04:10:24 Success Confirmation mode test found. File will be resent next time
2005-05-07 04:10:24 Success The message was successfully retrieved from the send queue.
2005-05-07 04:10:24 Success The message status set to DLNG.
2005-05-07 04:10:24 Error Transmitting the message to endpoint http://nadcp517:8020/sap/xi/engine?type=entry using connection AFW failed, due to: Received HTTP response code 500..
Any suggestion...

hi
This problem comes due to the post installation steps might be at the time of post installation some wrong might be done.
step1 : In sxmb_adm configure the integration server by giving the path as http://<host>:<abapport>/sap/xi/engine?type=entry
step 2 : Check ur business system created at the time of post installation there u need to main the path as it as above.
Reward points if useful,
Regards,
Srinivas.D

Schedule a report with custom datasource cause "failed to open connection"

Dear all,
I have a BOE enterprise Xi 3.1 SP 2.3 running on a RED Hat Enterprise kernel 5.3 with tomcat as web server. I have a report design with crystal report designer. The report default use JDBC as connection to Oracle 11g database. If I select to "Use original database logon information from the report" I can schedule the report and a success instance returned. If I select "Use custom database logon information specified here" and the custom driver inputted "crdb_jdbc". I can not schedule a report and obtain a success instance. It throw "Failed to open connection. {Report Name}"
I have add the Oracle 11g JDBC driver (ojdbc5.jar) to the classpath in bobje/java/CRConfig.xml.
Anything I have missed, Please advice.
Gabriel.

Please help

Import of a request failing : ERROR: connect failed due to DbSL load lib fa

Hi,
I am using ecc6, on hp-unix and oracle as database.
When i try to import a request from stms, i get this error.
DURING IMPORT ERROR:
    Transport control program tp ended with error code 0249
    Errors: connect failed due to DbSL load lib failure
TP ERROR:
Transport control program tp ended with error code 0249
    Message no. XT200
Diagnosis
    An error occurred when executing a tp command.
      Command:        IMPORT E07K901512 DEV client100 U01 pf=/usr/sap/tr
      Return code:    0249
      Error text:     connect failed due to DbSL load lib failure
      Request:        E08K901525
System Response
    The function terminates.
Procedure
    Correct the error and execute the command again if necessary.
THEN I TRIED TO IMPORT USING TP COMMAND:
WITH OUT DIR_LIBRARY
% ./tp connect DEV
This is ./tp version 370.00.09 (release 700, unicode enabled)
E-TPSETTINGS could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in TPSETTINGS: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
% ./R3trans -d
This is ./R3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
unicode enabled version
2EETW169 no connect possible: "environment variable DIR_LIBRARY is not set."
./R3trans finished (0012).
% # export DIR_LIBRARY=/usr/sap/DEV/SYS/exe/run
% ./R3trans -d
This is ./R3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE                           --- ORACLE_SID =
'DEV'"
./R3trans finished (0012).
% ./tp connect DEV
This is ./tp version 370.00.09 (release 700, unicode enabled)
E-TPSETTINGS could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in TPSETTINGS: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
COULD SOMEONE GIVE ME A SOLUTION TO OVERCOME THIS.
YOUR SOLUTION AND GREATELY APPRITIATED.
REGARDS,
DHANANJAY

Hi Dhanajay,
Firstly check if R3trans -d is working fine.
If so, please chek if the following parameters are set properly.
DIR_LIBRARY=/usr/sap/<SID>/SYS/exe/run
TRANSDIR = ....\trans
<SID>/DBHOST = <HOSTNAME>
<SID>/DBNAME = <SID>
<SID>/DBTYPE = ora
Execute the below command and check the transport profile:
tp check all pf=/usr/sap/trans/bin/TP_DOMAIN_<SID>.PFL
Please confirm the permission of the /oracle/ directory
The permission of the /oracle should be 755.
Also check if the import queue is not locked.
Also please ensure the Kernel is of latest version, if not, please update the DBSL shared library.Please look at the note 19466.
Finally you can try once distributing and activating the transport routes once.
When you executed command R3trans -d logfile trans.log will be created.
Please check this file for exact error information.
Paste the log file here.
Let us know the outcome.
Regards,
Sujit.

Cannot connect to olap service. Cannot connect to Essbase Server. Error:Essbase Error(1051293): Login fails due to invalid login credentials

Hello All,
I am getting following error, when trying to expand essbase from calculation manager, "Cannot connect to olap service. Cannot connect to Essbase Server. Error:Essbase Error(1051293): Login fails due to invalid login credentials",
I am using EPM 11.1.2.1
Thanks
Yash

If you have moved the server to a new data center and an issue has started occurring then it could point to the change.
Are you able to log into essbase directly with Maxl using the same account?
If you run a registry report do you see any of the configuration with IPs instead of DNS/hostname
Cheers
John
http://john-goodwin.blogspot.com/

Scheduled restart fails due to connected user

Similar Messages

Maybe you are looking for