Scheduled series are not recording

About 2 weeks ago I noticed that some of my scheduled series (record new only) were not being recorded. After checking that there were no programming conflicts I manually programmed the following week's episode, and when I tried to program it as a series I received the message that the series was already programmed, so i chose to just record that episode. Now I have to manually record these series. What's up?
This is happening with the new season of Parenthood, Revolution and Top Chef. Does anyone know why this is happening?
Solved!
Go to Solution.

Are you sure the programs you are trying to record are brand new (meaning they have never aired before). You may want to change the setting to "new and repeats". This setting will make sure each episode will be recorded, even if the system is not sure if it is a re-run or a brand new episode, but it will not record duplicate episodes.

Similar Messages

Schedule lines are not getting generated during MRP Run

Schedule lines are not getting generated during MRP Run. I have maiantained source list for the material with proper validity date and also maintained scheduling agreement . MRP relevvant Indicator , I have marked - 2 which means -Record relevant to MRP. Sched. lines generated automatically.
Still I am not able to get schedule lines and instead of that *Purchase Requisitions* are getting generated.
Can any one help me and suggest me what to be done in this case .
Thanks & Regards ,
Nirmalya

Dear,
Welcome to SDN,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.
Regards,
R.Brahmankar

Schedule lines are not in sink for PO

Hello Everyone,
We are using ECS.
So we create PO in SRM with some schedule lines and transfer it to the ECC system.
But sometimes the schedule lines are not in sink on both the sides because buyer update the schedule lines on SRM side.
So we need to check that is schedule lines in SRM and Basic quantity in SRM are same or not?
So is there any OSS note to check this?
Regards,
Khushbu.

Hi,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.

Scheduled jobs are not running DPM 2012 R2

Hi,
Recently upgraded my dpm 2012 sp1 to 2012 R2 and upgrade went well but i got 'Connection to the DPM service has been lost.(event id:917 and other event ids in the eventlog errors ike '999,997)'. Few dpm backups are success and most of the dpm backups consistenancy
checks are failed.
After investigating the log files and found two SQL server services running in the dpm 2012 r2 server those are 'sql server 2010 & sql server 2012 'service. Then i stopped sql 2010 server service and started only sql server 2012 service using (.\MICROSOFT$DPM$Acct).
Now 'dpm console issue has gone (event id:917) but new issue ocurred 'all the scheduled job are not running' but manully i can able to run all backup without any issues. i am getting below mentioned event log errors
Log Name: Application
Source: SQLAgent$MSDPM2012
Date: 7/20/2014 4:00:01 AM
Event ID: 208
Task Category: Job Engine
Level: Warning
Keywords: Classic
User: N/A
Computer:
Description:
SQL Server Scheduled Job '7531f5a5-96a9-4f75-97fe-4008ad3c70a8' (0xD873C2CCAF984A4BB6C18484169007A6) - Status: Failed - Invoked on: 2014-07-20 04:00:00 - Message: The job failed. The Job was invoked by Schedule 443 (Schedule 1). The last step to
run was step 1 (Default JobStep).
Description:
Fault bucket , type 0
Event Name: DPMException
Response: Not available
Cab Id: 0
Problem signature:
P1: TriggerJob
P2: 4.2.1205.0
P3: TriggerJob.exe
P4: 4.2.1205.0
P5: System.UnauthorizedAccessException
P6: System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal
P7: 33431035
P8:
P9:
P10:
Log Name: Application
Source: MSDPM
Date: 7/20/2014 4:00:01 AM
Event ID: 976
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer:
Description:
The description for Event ID 976 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The DPM job failed because it could not contact the DPM engine.
Problem Details:
<JobTriggerFailed><__System><ID>9</ID><Seq>0</Seq><TimeCreated>7/20/2014 8:00:01 AM</TimeCreated><Source>TriggerJob.cs</Source><Line>76</Line><HasError>True</HasError></__System><Tags><JobSchedule
/></Tags></JobTriggerFailed>
the message resource is present but the message is not found in the string/message table
plz help me to resolve this error.
jacob

Hi,
i would try to reinstall DPM
Backup DB
uninstall DPM
Install DPM same Version like before
restore DPM DB
run dpmsync.exe -sync
finished
Seidl Michael | http://www.techguy.at |
twitter.com/techguyat | facebook.com/techguyat

Scheduling parameters are not defined for production orders

Hi All,
when i convert the planned order to production order i got this massage popup coming Scheduling parameters are not defined for production orders . please let me know this .

Hi,
One of major customization steps for the order type is missing. Run OPU3 and maintain settings for the order type you are using. You may copy settings from an older type.
Regards.

KSPP -Scheduled Activity are not updated for last 2 periods

Hi All,
When we run KSPP by using LTP, noticed that for one cost center and activity type the plan scheduled Acivities are not updated for last 2 period's.(shows Zero)
Do we miss any thing.
Regards,
Raj

Hi,
It can be due to the sales demand you have uploaded and the Lead time in the material master
because of the that, the demand gets shifted before (say, Dec demand gets shifted for manufacturing in October) and the activity qty in the last month comes zero
So, upload 14 months demand where 13 and 14th month is the same as 12th month... Most of the companies do this way
Ajay M

I have downloaded an ical subscription. It appears on the sidebar as checked, but the data (holidays) are not recorded in Ical. I tried re-downloading, but the same problem exists.

I have downloaded an ical subscription. It appears on the sidebar as checked, but the data (holidays) are not recorded in Ical. I tried re-downloading, but the same problem exists. Can you assist?

drjil,
It is possible that the subscription is not valid or up-to-date.
If you are looking for U.S. Holidays, here are three alternative choices besides Apple - Downloads - iCal Calendars - US Holiday Calendar.
1. Welcome to iCalShare
2. iCal World - Holiday Calendars by Country
3. US Federal Holidays, ICS format, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015.

Scheduled crawls are not crawling all available database rows while manual

We have "Sales" and "Lettings" properties are indexed separately. The data for these 2 types of property types are being indexed on tables "dbo.SESSalesPropertiesRollup" and "dbo.SESLettingsPropertiesRollup" respectively. The SES scheduling is indexing at 11:45 PM UK time for these 2 tables. We randomly picked few records which exist in these tables but they are not shown up when we search for those properties in the search page of SES

Hard to know what's going wrong from this description. Have you tried running a complete recrawl? (Edit the schedule, go to Update Crawler Recrawl Policy and select Process All Documents).
Any errors in the crawler log file?
Suggest you should probably raise an SR with Oracle Support - or email me directly - you probably have my email address already.
- Roger

Schedule lines are not coming after MRP run for HALB material

Dear All,
I am not getting schedule line after mrp run, inspite of all required setting only purchase requisitions are coming.
Material type is HALB and involve a subcontracting process (30). For raw material I am getting the schedule line but in the case of HALB, it is not coming.
Pls let me know if I am missing something and guide me further on this.
Thanks & Regards
Kundan Kumar

Dear All,
I am closing this thread. As the vendor mentioned in scheduling agreement is not a subcontracting vendor. Its a individual vendor.
Thanks for all the reply.
Thanks & Regards'
Kundan Kumar

Schedule lines are not generating properly in MD04

Hello All,
I have a issue in MD04, in which schedule line for Schedule agreement is not getting generated on the same day as sales order is created (09.05.2014). But Schedule line is getting created in different date. Because of which i am creating schedule lines manually at required dates.
Note: I have attached screen shot of MD04
Kindly help me to overcome this issue.
Regards,
Manoj

Hello Manoj
Please observe that there are rescheduling exception messages and rescheduling dates for your scheduling agreements. It generally happens when you have sales orders in the past and you don't allow "start in the past" for replenishment proposals generated by MRP.
Go to the customizing transaction OPPQ and change the customizing "start in the past". After that, run MRP again for your material and the schedule line dates should match the sales order. Please observe that firmed schedule lines wont't be changed.
BR
Caetano

User changes in tab strip ui element are not recorded in context change log

Hi All,
We are using a tab strip ui element in webdynpro component. But user changes inside tab strip ui element are not getting recorded to the context change log. I have an input field on the same view besides tab strip ui element. User changes to this input field are getting recorded to the context change log.
Is there any restriction on context change log usage with tab strip ui element?
Could you please suggest If there is any way to record changes inside tab strip ui element.
Thanks,
Sudheer.

I think there are some limitations exists, context change logs are not complete when you do value help , i am not sure about tab strip.
[http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/a8e5d273b12fe2e10000000a42189d/content.htm|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/a8e5d273b12fe2e10000000a42189d/content.htm]

Schedule dbms_job are not runing

Hi all,
we have database link between two database ysccapps on IBM-AIX 5.2 and bmms IBM-AIX 4.3 before one month bmms database was on windows platform but i migrate from window to ibm aix 4.3 my probelm is some dbms_jobs are running and some are not runing.these job invoking procedure.those not rununig jobs we can run it manually but we need to run these jobs daily basis in schedule time. there is database link between two database.i saw on the net about this job_queue_interval and job_queue_processes, in both the database job_queue_proceses are 10 but job_queue_interval is obselete.
my question how to run these job daily, can any one suggest me. i daily see through toad also.quick response will higly appreciated.thank a lot in advance
Best regards

Are any of the jobs marked as broken? It could be that they have failed enough times that they system marked them broken.
Or, are the jobs scheduled to run. When are they due to run next?

Leading Zeros of Consumption in historical time series are not considered

We are using VM MRP Type and weighted average model to calculate forecast value using historical consumption values. I have 36 historical periods(months) but have consumption incurred only in last period i-e "1". I have choosen a weighted group 01 (20% for 1-12 month, 30% for 13-24 month, 50% for 25-36 month). Using these setting it should calculate the basic value as 1*0.5/12 = .042 but it gives "1" as basic value not considering leading zero consumption value in historical time series. If i put a value in first period it calculates correctly and considers the leading zero.
We have implemented note 1113276, 1145764 & 1113277 and have chosen CV_OPTION="X" in the interface as per theses notes instructions but still while executing the forecast it is not considering the leading zeros.
We are using ECC 6.0 MM with 602 support pack.
Need urgent help in this regard.

Have you followed the steps as per SAP Note 1113276 , Just check below link with same subject discussed check it helps you,
[Forecast with consumption zero are not considered |Forecast with consumption zero are not considered]

Scheduled program did not record

I scheduled a program to record on the MRDVR. The first time I scheduled the program, I scheduled it from the STB. I scheduled it to record first-runs. The program recorded, no problem.
This week, when I went to watch the recorded program, I saw it was not recorded. I checked the scheduled recordings and the program was not there. Yesterday, I scheduled the program again, this time from the MRDVR. Today when I checked it, the program again did not record.
I'm was thinking maybe the problem was the program does not broadcast the same time everyday, but then I remember it was recording the program at different times last week.
Any suggestions to what the problem is?

You can also check DVR and it will tell you why something didn't record.
Go to DVR - All Activity.
Scroll down tot he show you were joping to record,. It will tell you what happened.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

MRP schedule lines are not created by MRP

Hi !!
I have a finished product ""111-2523-64"" and in its BOM i have a semifinished product ""111-2523-64-010"" produced(Inhouse)& three raw materials .
For the Raw Materials I have made the scheduling agreement & source list with indicator ("2"" create schedule lines automatically""
Problem -: Now when I run the MRP using T-Code MD02 the system is planning the finished & semifinished product
*but no schedule lines are created for the raw materials.*
Please Guide , Itz very urgent.

Vijay , Pleae clear
I have a doubt
I am having one finished product & in its BOM i have three raw materials.
I have created the scheduling agreement for these three raw materials and source list too.
now when i run the MRp for finished product using t-code md02 the schedule lines must be generated for these three raw materials.
or
i have to run the MRP (seperately using T-Code Md01 ) for these three raw materials
Please guide , its very urgent.

Scheduled series are not recording

Similar Messages

Maybe you are looking for