Scheduled status MEssage
Hi Frnds,
I saw in SXMB_MONI THAT FEW XML MESSAGEDS HAD stuck up in sheduled status. Can anyone tell me why is it stuck in sheduled status. When i try restarting it then it says the message is already sheduled. I see some more message stuck in queu before this one. but i want only this message.
PLS HELP.
Thanks
Rohit
Hi Rohit,
Do you see any RED color LED under the Queue status for the scenario you have designed ? If so double click it -> go to the QUEUEID (example XBT..)in the same line-> Dobule click it->again double click the queue name ->Press F5 or click the button (Unlock Queue) in the menu tab.You can also try in this way.
Thanks,
Ram.
Similar Messages
-
Scheduled Status in Message Monitoring
Hi All,
We have a scenario from DB- DB using Java Proxies. The Message interfaces are defined as Asynchornously with EO mode.
Usually the sender channel picks data and tirggers Java Proxy. Proxy process all records and send the status back to sender in 5 mins.
But when I started multiple interfaces at the same time, I observe that one interface is taking 15 min and while that interface is in processing state, the other interface which started at that time are also in Scheduled status. But the sender channel picks data for every 5 mins, which is creating duplicate records.
The interfaces which are in Scheduled status are getting processed only after that interface ( taking 15 min) gets processed.
Why is this dependency on other interfaces and is there any way to avoid this dependency?
Please suggest.
Regards,
Sriniyou can do queue/message prioritization.
but I suggest to use one status field in DB, when you are polling DB to select records , immidiately change staus to picked and after processing successfully change it to processed. -
Proxy messages are stucked in SMQ2 as scheduled status
Hi,
I am doing File(FCC) >PI 7.0>ABAP proxy. (ECC) Scenario.
Once i pick and process the file, the resultant message is updating the table in ECC through ABAP proxy. These messages are getting stucked in queues (SMQ2) in ECC. My message is not having much data , it is very less in size.
And there is no messages in Queue.
I register all queues in SMQR in PI and ECC.
Does I need to do any activity in ECC or PI? What could be a problem. Please suggest .
Thanks
AyubHi Venkata,
Thanks for very quick replay.
Are the messages stuck with any error?--> First I can see the Green Color Flag as scheduled status, I open the message I can see there is no error message.Bt when I have look at end of the message in SXMB_MONI at Q.Status , I can see Message Has error
In SMQ2 -->
Cl. Queue Name Entries Status Date 1 Time 1 NxtDate NxtTim Sender ID Wait for queue
200 XBTR0009 1 SYSFAIL 24.02.2012 10:53:34 24.02.2012 10:53:34 R3DEVQA_RDV_01
And when I double click the XBTR009 I can see the below message :
Cl. User Function Module Queue Name Date Time StatusText
200 ALEREMOTE SXMS_ASYNC_EXEC XBTR0009 24.02.2012 10:53:34 Screen output without connection to user.
This are status of the messages. Please help me.
Regards,
Ahmed -
How to clear the message which are in scheduled Status in PI 7.3
Hi,
We want to clear/cancel the message in Message monitor which are in scheduled status in PI 7.3.
It only a JAVA Stack System , We have been trying to clear the message manually but it take more time resulting into performance issue.
Is there some other way we can clear it from Database level.
Our Database is Db2 9.7 with Fix Pack 5
Can anyone help me in clearing the message at fast speed ?
Thanks in advance
Amit ShedgeHi,
First we check the status of Message
a) db2 => select count(*) COUNT, status from sap<sid>db.bc_msg group by status
COUNT STATUS
110 DLVD
641623 NDLV
2 record(s) selected.
Then we update the status of Message to Failed
b) UPDATE BC_MSG SET STATUS='FAIL' WHERE STATUS IN ('DLNG', 'TBDL', 'WAIT', 'HOLD', 'NDLV') AND SENT_RECV_TIME <= '2014-22-03 00:00:00'
c)
select count(*) COUNT, status from sap<sid>db.bc_msg group by status
COUNT STATUS
183 DLVD
641623 FAIL
d) Then we started the Standard deletion Job in NWA
db2 => SELECT COUNT(*), STATUS FROM SAP<sid>DB.BC_MSG GROUP BY STATUS
1 STATUS
98 DLVD
And the message got deleted.
Thanks & Regards
Amit -
Send Commit to message stuck in "Message Scheduled" status
Hello,
I generated some messages using ABAP Proxy. However, the commit work never happened in the program that created the message. Now these messages are stuck in "Message Scheduled" status. How can I push the message forward. Can I trigger a commit? If so, how?
Regards
CerishHi Cerish,
Are you getting this status in the XI ? If so, go to Queue Monitor and try to activate the same.
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
Also check the SXMB_MONI of Application System(R/3) if you have a access about is proxy message is executed or not .
If the status is restart not possible, then you need to reprocess that.
Hope this helps,
regards,
moorthy -
Manage Queues - Messages are in Schedule status after upgrade to ERP2004
Hi,
We upgraded SAP to version ERP2004. ABAP proxy XI messages are in schedule status even though we deregister and register & activated all queues.
When I click on the queues it is in running status.
Does anyone has any idea where should I look?
Thanks in advance!
MrudulaHi,
my scenario is file to idoc....
I have set paraemter in SXMB_ADM as below.
Category Parameters CurrentValue DefaultValue
RUNTIME HTTP_TIMEOUT 100000 0
I have gone through as you suggested still when i double click on message in SXMB_MONI...i am getting Runtime Error (TIME_OUT).
Please do help me..
Thanks in advance.
Krish -
XML Messages in "Scheduled" status
Hi all,
The case is at ERP side running transaction SXMB_MONI, some XML messages from XI to ERP are found in "Scheduled" status. Around the same time, siimilar messages using same receiver interface are processed successfully. When we manual restart the "Scheduled" message, there will be an entry in READY status at inbound queue and we have to unlock the queue. After that, the message will be processed successfully.
Here are my questions:
(1) Why some messages in "Scheduled" status but similar messages are processed successfully?
(2) Is there any alert or notification mechanism that we can setup instead of running transaction SXMB_MONI manually?
(3) Is manual restart XML message a proper way to handle those scheduled message? Any way to automatically handle this message in ERP side?
Thanks in advance.Donald,
Here are the answers to ur questions.
(1) Why some messages in "Scheduled" status but similar messages are processed successfully?
Some times the queues get stuck for various reasons. one msg will cause bottleneck for all other msgs behind it. there is no proper reason why this happens, however if it happens regularly then u will have to give it a thought.
(2) Is there any alert or notification mechanism that we can setup instead of running transaction SXMB_MONI manually?
Well, if the msgs r in the scheduled state then NO.
(3) Is manual restart XML message a proper way to handle those scheduled message? Any way to automatically handle this message in ERP side?
Manual restart is not the best way to handle msgs bcause you might loose track/ some msgs might error out together causing issues. (that has happend to us). its tough to keep track if that is the case and if its critical from business point of view.
If it is going out of R/3 then may be you can configure jobs to push the data periodically.
Regards,
Pavan -
Messages goes into scheduled status in adapter engine
Hi all
we are doing idoc to file scenario with direct mapping. the messages are getting processed in integration engine sucessfully. the messages are getting into scheduled status in the adapter engine even when there is less load in the server.
Thiis specially happening for IDOC to file scenario only. Any help is highly appreciated
Thanks>
> the system is quite good at the moment but the some of the messages again into scheduled status like ( 10 out of 1000 messages ) . the system is not performing at 100 % rate since some messages moves to scheduled status. Is still the performance can be improved in any other ways ?
>
This is really strange behaviour , If Communictaion channel functioning correctly then all succesfull messages should deliver to Receiver system.
Better to check payload of scheduled messages(if wrong payload obiously it goes schedule status),try to to reprocess them.
I never used XCOPY command,so no comment on that.
Regards,
Raj -
Messages remain in Scheduled status in message monitoring in RWB
Hi PI experts,
I have got a situation where there are several messages showing in the Scheduled status. I followed the path RWB > Message Monitoring > Adapter Engine > Database (Overview) > Display.
QoS for these messages is EOIO, however there are no messages stuck in the queue. All other channels are running smoothly. Only with this particular channel the messages remain in Scheduled status for a long time.
I am neither able to make out the roor cause nor reprocess/resend these messages. Pleaes help.
Regards,
DhawalHi Suraj,
What you said is absolutely correct. However, as I mentioned, the error message was not visible in RWB.
My problem just got resolved. What I did is this,
I followed the link http://<server>:<port>/MessagingSystem/monitor/monitor.jsp which is SAP Message Display Tool.
Here in EOIO Sequence Monitor I found the error message and it's predecessor. When I resent the erroneous message from here, all subsequent Holding messages got processed.
Thank you everyone for your help. Have a gr8 day...
Best Regards,
Dhawal -
Messages in Schedule status in SXMB_MONI and going into queue in SMQ2.
Hi Experts,
All messages in XI going to schedule status in SXMB_MONI. When i check in SMQ2 to release after some time the messages are going to "SYSFAIL (Time limit exceeded)" status.
When i double click on the message in SXMB_MONI, the system is going to "Runtime Error (TIME_OUT)".
Could anyone please help me how to fix this issue.
Thanks in advance,
GRKHi,
my scenario is file to idoc....
I have set paraemter in SXMB_ADM as below.
Category Parameters CurrentValue DefaultValue
RUNTIME HTTP_TIMEOUT 100000 0
I have gone through as you suggested still when i double click on message in SXMB_MONI...i am getting Runtime Error (TIME_OUT).
Please do help me..
Thanks in advance.
Krish -
Delete Successfull Message but error or schedule status in outbound ?
Hi XI Expert,
I have problem to delete the xml message with status Processed Sucessfully but got error / schedule status in outbound message. I can cancel this type of message, so this message will be persistent forever in my database.
could you advise how to cancel this message so the deletion job will remove automatically.
Thank you and Best Regards
FernandHi All,
I already set PESIST_DURATION for DELETION and also running RSXMB_DELETE_MESSAGES.
but then those message with Status = Success but having error / schedule status still in database, i can't even cancel the message.
so any idea how to cancel or delete this type of message.
Best Regards
Fernand -
Hi Vadim,
Thanks for your help in my previous issue.
My client wants to setup the error message when the user enter >1 value in input schedule against to each month(Jan,Feb and March etc) it is basically HC planning where as they have average headcount value is 1 (So that the user has to enter the value between 0 to 1). The requirement is when the user enters more than 1 then the system needs to thrown an error message and it has to restricted the user.
I have found the normal excel function to setup this error status message through data validation in excel. Can you please tell me is there any EPM function available for this kind of setups in SAP BPC 10.0 EPM. So that we can use that option instead of normal excel function.
Please see my current setup message in the above screen shot.
Regards,
SatishHi Satish,
No EPM functions available, you have to use Excel data validation.
BPC can validate data only afte data was sent to database.
Vadim -
Proxy messgs on ECC in scheduled status - released for processing (PI 7.1)
Hi guys,
I have set up a scenario (ABAP Proxy(ECC)->(using WS adapter)PI7.1->SOAP) and the outbound messages on the ECC remain in the scheduled status (green flag) saying "Released for processing (WS)". Why? Must there be some processing be executed? Manual? Or job?
Any help on this appreciated, OlianHi Olian
Try applying the solution in the SAP note #1129614 SP2: WSRM sequences process only the first 3 messages.
Regards
Mark -
Channels getting in scheduled status
Hi ,
All the channels in PI is getting in scheduled status , the channels were working fine till 1 PM , but all of a sudden the status oof massages are going to scheduled state.
There is no blocked queue in SMQ1 and SMQ2 , even there is no error in RZ20 .
Please help , this is a prod issuehi,
*Whenever we set the sender communication channel as FTP/NFS and Quality of Service as Exctactly Once in Order ....*
*Sometimes, the status of the messages in the message monitoring of the adapter framework is Holding status.*
*To clear the holding status messages from Adapter engine ............*
*process*
*http://hostname:port/MessagingSystem -click on EOIO Sequence monitor.*
*If messages are stuck then you can see HOLD and NDLV status.HOLDreprasents holding the messages in adapter engine in EOIO queue.NDLVreprasents the messages not delivered to Integration Server.*
regards,
kesava -
XML Status : 'Message recorded, commit missing"
Hi,
I am calling my proxy in a BADI. After triggering it, when I go and check in SXMB_MONI, the status of XML message is "Message recorded, commit missing". And it is in Scheduled status.
Could you please let me know, why this message will come, and how to make it run successfully.
Thanks,
SandeepI think you are gettking this error in transaction SXI_MONITOR in ERP system. As replied earlier by Divyesh, you need to write commit work statement in ur BADI after calling the proxy method.
If you test this proxy from transaction SPROXY, then also u will see this error with ur message and u need to trigger Commit work/Rollback explicitly to send message to central PI server. While testing ur proxy from SPROXY u can trigger Commit/Rollback from menu
Extras - > Trigger COMMIT WORK / Trigger ROLLBACK WORK
Maybe you are looking for
-
Sorry for the long title, this is the first time I have used this place. The local Mac engineering support in Jamaica is a small shop in town. They told me I could go up to 750 gig, which appeals to me as I use this for my business. And oldie but goo
-
JSP xml syntax, taglibs not found
Hello, I have JSPs look so: <?xml version="1.0" encoding="ISO-8859-1"?> <!DOCTYPE jsp:root [ <!ENTITY nbsp " "> ]> <jsp:root version="1.2" xmlns:jsp="http://java.sun.com/JSP/Page" xmlns:afc="http://afclabs.com/tags/afc"
-
Background Colour displays over my flash work
Dont know what this problem is. I've got a clients game that needs to be handed on Wednesday and cant get any help from my flash tutor because im not in college UNTIL wednesday. Anyway for some reason when i test scene the box comes up showing my fla
-
Best Practice to Migrate from XI R2 to 2008
Hello, We currently have a server which is running Crystal Reports Server XI R2. I have a new server which I have installed Crystal Reports 2008 on and want to migrate our reports to that server. Ideally though, I want to get everything working and
-
Distribution Provisioning Profile Help
Hi, I have an application that I've already uploaded and is available for sale ( using a distribution provisioning profile ). However, something seems to have happened and when I view my "Build" settings I can no longer see the distribution profile i