Scheduled Stop and Start all PI communication channels

Hi,
Is there a way to Schedule Stop all PI communication channels at perticular time and start back at pertuclar date and time?
or is it only a munual way? stop all sender communication channels? if so, how do i keep track of the channels proprties details? like automatic control, external control off etc?
Thanks.
Prema

Hi Prema,
You may try the below steps to start and start the channels automatically.
1> Open page http://<<hostname>>:<<portnumber>>/mdt/channelmonitorservlet
2> click on "Availability Time Planning" on right top of your page.
3> click on create. Fill up the requied details. Please note the below example is for the channel for which I want to be up only from Monday to Saturday and for only one hour on these days from 11AM to 12PM.
Go to "communication channels" tab enter the channel name as below and it will select the channels for which you want this schedule to work.
Activate this and in communication channel make sure that these channels are in "automatic control". You may do further trial on this and it should serve your purpose if your system has fixed start downtime and fixed start up time.

Similar Messages

Communication Channel Stop and Start

Hello everyone,
We are using XI along with MQ for queing messages to our 3rd party logistics. Due to some issues happened in the past, it is decided to stop and restart the MQ channels every weekend. Now the problem is, when the MQ is down, some of the XI communication channels will go down, and will not start automatically, when the MQ bounces back. Now this had created a manual activity every weekend to stop and start all communication channels.
Question is, is there any way we can schedule it as a job to stop and start the channels, at a specific time ?

Hi!
It is possible in scheduling the messages in XI...
1. But before doing this make sure that at what time you want to be schedule ?
2. Is that time will be uniform for every week or else is it may varies ?
3. If Uniform please make schedule or else if it is varying note the difference between those timings I mean
     If your Messages are flowing for every Tuesday and also every Thursday...., etc..
4. You can schedule what ever may be the time it is suppose if those timings are varying weekly once a
     day but in that single day or next day if it was more than once..then better scheduling the
      communication channels to be start for and to be process for that particular 2 days and remaining days
      it wont work I mean stopping Cc
5. Now when come to process...in scheduling...
a) Click RWB>Component Monitoring>Communication Channel monitoiing
b) Right side u can check Availability TIme planning option click that..a seperate window will opens
    THere u can observe these options..
c) also u can see the log
I hope it will be useful to you...
Availability plan--> ONCE /DIALY / WEEKLY/ MONTHLY based on your req select any one...
Create: to create the scheduling...
change: to change the existing one
Save: to save
Reset if u want toreset alll
Delete and copy also as u know these..
While creating you can again see these options 3 main TABS
details: --> Corresponding details
CC: select ur chanel
OPTION 2
In XI 3.O you can directly do scheduling there after selecting the radio button of any Comunication channel and there adjacent to Audit log u can see availability time plan other than rt side top corder..
I hope it will be useful to u
Regards
Amar Srinivas Eli

Tools and Script for stopping and starting SAP instances in the landscape

Hi All,
All our SAP system are on Windows 2003 and very few on Windows 2000.
Is there any possiblity for having a script which will stop and start SAP on all the instances in the Landscape from a central system?
Lets say we have some 200 SAP instances and we need to down all the instances for Windows patching.
In this case, we need to manually take remote desktop to stop and start all the instances one by one.
Also, do we have any 3rd party automated tools for this purpose?
Regards,
Siva.

Hi Siva,
You can configure ACC for your system landscape.
http://help.sap.com/saphelp_nwmobile71/helpdata/en/83/43cd574af1489aadd4d71b2f47b77d/content.htm
Thanks
Atul

Stopping and starting RAS

Hi! I was having trouble viewing my reports this morning (even though nothing has changed, everything worked fine yesterday) so I thought I would try stopping and starting all the servers to see if that would help. All stopped and restarted okay with the exception of RAS. It's stuck on the status of 'stopping'. It's been that way for at least 45 minutes. I don't have the option to restart. Anyone have any ideas on why it won't offically Stop? I've done it in the past with no problems.
Thanks for your help!
Cyndi

Never mind - I finally got it to stop. Thanks!

My video download gets about 2/3 of the way through, stops, and starts over

My video download gets about 2/3 of the way through, stops, and starts over (as if I had never downloaded anything). I have DSL, and it's the only video downloading. Why does it stop and start all over again, over and over? It's really bumming out my iTunes experience. Oh, and I'm running XP, not XPpro.

Let it go... these DL's take forever, depending on the spped of your connection and the traffic on the servers.
If by morning it is still sitting there restart and the DL should pick up from where it left off.

TS1424 I am trying to download a song and it gets to about 3.5mb and stops, then starts all over again. It has done this several times. Could the file be corrupt?

I am trying to download a song and it gets to about 3.5mb and stops, then starts all over again. It has done this several times. Could the file be corrupt?

Turn off the Firewall in System Preferences > Security (or Securtiy & Privacy) > Firewall
If you have anti virus software installed, you may need to disable that before downloading.
Restart your Mac and try again.

How to Stop and Start Scheduler Service

Does anyone know how to stop and start the Scheduler service for Hyperion Financial Reporting in release 9.3.1?

please see the metalink note
How to Start/Stop MWA Services Using Control Scripts adstrtal.sh/adstpall.sh? [ID 731320.1]
This is how i startup and shutdown WMA
for stopping :
1) login to Applications tier
2) To see if the MWA (telnet) server is running use:
ps -ef|grep DPID
3) cd $MWA_TOP/bin
3) ./mwactl.sh -login sysadmin/xxxxx stop_force 10200;
4) check the wma process from OS level
ps -ef|grep mwa
for starting
1) login to Applications tier
2) cd $MWA_TOP/bin
3) ./mwactl.sh -login sysadmin/xxxxx start _force 10200;
4) check the wma process from OS level
ps -ef|grep mwa

While playing videos on itunes, audio and video will stop and start. It just started doing this recently and it does it with all my itunes videos..help!!

While playing videos on itunes, the audio and video will stop and start several times during playback. This just started recently and it does it on all my videos. Help!!

Try to download the application VLC.
It is a media player that should be able to play any audio or video file you may have. If your videos play flawlessly using that application, then the issue is with iTunes and Quicktime, as they are both essentially similar software types when it comes to playing media.
In that case you may need to install a plug-in file called Perian, in order for the videos to play correctly within iTunes or at least Quicktime...

Some songs starts on my iPod, then stop and start from the begining and play all the way through

Hey,
While listening to songs on my iPod Classic 120gb, some songs will start to play, after 2-3 seconds, stop and start again from the beginning and play through the entire song no problems. On iTunes the songs still plays fine no stopping or starting. All songs are random artists and songs.
Help! its really frustrating!

Hey andy8299,
Do you have any other music software (i.e Limewire) installed? If so perhaps these files are not compatible.
See this for compatible song formats:
http://docs.info.apple.com/article.html?artnum=61476
Hope this helps,
Generik

Why can I not watch a video all the way thru without it stopping and starting, & freezing?

I like to go to abc or cbs pbs etc. and watch their videos but they do
not run all the way thru. They stop and start and stop and start and
freeze and start and quit.

If there are problems with updating then best is to download the full version and uninstall the currently installed version.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/sessionstore.js
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore
Some have reported that increasing the session store saving interval worked for them. 
See:
* http://kb.mozillazine.org/browser.sessionstore.interval
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
You can use the Filter bar at to top of the about:config page to locate a pref more easily.

Apple TV problem- Netflix message not availabale at present etc. On Itunes playing a movie the sound stops and starts how can the downloading hurry up. On the computer all OK.

Netflix keeps posting not available- have restarted it as directed but still a problem. Itunes movies dont download fast enough and stop and start. On the Imac computer no problem with sound or viewing.

What is your current connection using speedtest.net
I would check for interference using istumbler
Make sure DNS is set correctly on ATV (settings - general - network - configure DNS - automatic)

SSRS Report queries begin running slowly, have to stop and start report server to restore performance

We have had a production issue crop up twice now where reports begin running slowly seemingly at random.
When this happens we can see from running SQL Profiler that the report queries are taking an extremely long time to execute. The same queries when run directly in management studio run quickly.
Initially I suspected parameter sniffing, and tried using OPTION (RECOMPILE) in the reports, as well as clearing out the particular query from the plan cache and running the SQL in SSMS to try and get a better plan etc but no amount of jiggery pokery by
me could get the queries to run any faster.
The really weird thing - is that stopping and starting the report server via the reporting services configuration manager instantly cures the problem.
I'd really love to know - why this might be? Is it something to do with the report server closing and re-opening its connections to the database? That's the only sort of thing I can think of...any ideas? Anyone? Any suggestions would be much appreciated.
LucasF

Hi LucasF,
In your scenario, usually we can monitor the execution log in Report Database. If you run below query, you can get the results how long the report takes to render (TimeRendering), how long to process the report(TimeProcessing) and how long to retrieve data
from Database(TimeData). You can check the starttime and endtime to know the total time for executing a report.
SELECT TOP1000 *FROM[ReportServer].[dbo].[ExecutionLog2]
More details information, please reference to similar thread below:
Steps for troubleshooting a slow SSRS 2014 server
Troubleshooting Reports: Report Performance
In SQL Server Reporting Services, a job will be created by SQL Server Agent if any of the following processes is underway:
query execution on a remote or local database server
report processing
report rendering
To cancel a job that is running on the report server, we can cancel the job directly or reduce the report execution time-out value in the SQL Server Management Studio and then will stop query execution. Please refer to the steps below:
Open SQL Server Management Studio, and connect to "Reporting Services".
Under the Report Server node, right-click on the "Jobs" folder and select "Refresh". Then, right-click on "Jobs" again and click "Cancel All Jobs".
Right-click on the Report Server node and open the "Server Properties" dialog.
Click the "Execution" option, and set the "Limit report execution to the following number of seconds:" to a much smaller number. After this issue is resolved, this configuration should revert to the previous state.
Reference:
Managing a Running Process
Setting Time-out Values for Report and Shared Dataset Processing
In addition, we can also use the KILL Transact-SQL statement to terminate a normal connection by terminating the transactions that are associated with the specified session ID. For the details information, you can refer to:
KILL (Transact-SQL)
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Stop and Start Services

Hi All,
We are stopping and starting the services for daily backup. Is it advisable to stop and start services.
Because client wants to stop the services before taking the backup anf start the services after backup.
In this scenario, what services do we need to stop for backup process.
Regards,
Kumar

Hi Saichand,
Thanks for the response.
Do u have any idea on the below:
Our scenario is the below:
We have a daily back of BI folders and Loading data from ERP to 10g database.
We logged in with remote desktop user A from ABC system to BI system and We created a batch file to start and stop all the BI the services and scheduled this batch file using windows schedule tasks. These batch files will stop the BI services and after 30 minutes another batch file will load data into the database, after 2 hours start services batch file will start the BI services.
When we open the BI Dashboards in the morning, all the dashboards and reports are working fine. But when I login to BI system, OC4J windows is not visible and dashboards are not coming and when we check the logs, LOGs says OC4J is running.
Please suggest us the solution.
Regards,
Kumar
Regards,
Kumar
Edited by: user597882 on Aug 26, 2010 3:35 AM

Every video or podcast stops and starts every second

Any help would be appreiciated, using Chrome, Windows XP Pro with SP3, Pentium 4 2.4GHz, with 2GB Ram, with Nvidia Gforce 5200 video card! Too old a system??

hi, all three are pretty much the same, and its not a buffering issue. I hav Verizon Fios and had a WUGNET speed test show download speed being 11.3 Mbps and upload of 1.24. It was possible the Html was slightly better but not by much.
Jim
Date: Thu, 25 Oct 2012 15:22:01 -0600
From: [email protected]
To: [email protected]
Subject: Every video or podcast stops and starts every second
    Re: Every video or podcast stops and starts every second
    created by Chris Campbell in Using Flash Player - View the full discussion
That should be fine for system specs. My first guess would be network bandwidth issues. Does it seem like the video/audio buffers fast enough or does the buffer continue to run out when the item is played? Try these two links out, do either of them play better? HTML5 videoNon-HTML5 video Thanks,Chris
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4801142#4801142
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4801142#4801142
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4801142#4801142. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Using Flash Player by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Order of stop and start of reporting services

Hi All,
I am using 11.1.1.3 version in my laptop,i want know the correct order of stop and start the services,please help me on this.
Thanks
Hypuser

The full order list can be found at :- http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_install/ch05s02.html
Cheers
John
http://john-goodwin.blogspot.com/

Scheduled Stop and Start all PI communication channels

Similar Messages

Maybe you are looking for