SchedulerTask and external webservice problems

Hi,
I need to build an application that fetches some report from an external webservice (Axis) on the net and stores some data in a portal database.
However, I picked the KM-residing SchedulerTask to solve this issue because you can run it just like cron-jobs and the like.
In my SchedulerTasks code - it has been tested standalone and does a great job fetching data from webservice - the calls fails due to a "connection refused", see stacktrace way below.
My portal is a development machine and is therefore talking to and with everyone, fully open, un-proxied and should not hinder me from accessing such a webservice, I think.
I checked the webservice URL (wsdl-ended) is accessible from within my SchedulerTask by opening a simple java.net.URL on it which worked really nice.
My questions are:
- Did someone experience a similar behaviour and if so how did you solve this?
- Is there any additional configuration needed to make portal/KM speak with external webservices?
- Any other thoughts?
Thanks for your help!
regards,
Christian
The essential lines from the stacktrace:
{0}#1#AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
faultSubcode:
faultString: java.net.ConnectException: Connection refused
faultActor:
faultNode:
faultDetail:
        {http://xml.apache.org/axis/}stackTrace:java.net.ConnectException: Connection refused
        at java.net.PlainSocketImpl.socketConnect(Native Method)
        at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
        at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
        at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
        at java.net.Socket.connect(Socket.java:461)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)

For iSight help, consider http://support.apple.com/kb/HT2090
In addition to testing with iMovie, you can also test video recording with QuickTime Pro if you have it.
Because you have similar problems with Photo Booth when using another camera, you may be rushing Photo Booth. Consider the suggestions offered here:
http://discussions.apple.com/thread.jspa?messageID=7018319&#7018319
If apps other than Photo Booth record properly but you do not want to use one of those that work properly, it is possible that a corrupted Photo Booth Preferences file is causing your problem. Quit Photo Booth (and all other applications) and throw away the Photo Booth Preferences file (com.apple.photobooth.plist) from your Home / Library / Preferences folder. A new preferences folder will be generated when you restart Photo Booth to test whether it works now.
If resetting preferences did not help but you still want to use Photo Booth, reinstalling the Photo Booth app might help.
If no app works properly, see your Apple Authorized Service Provider for professional help.
EZ Jim
G5 DP 1.8GHz w/Mac OS X (10.5.7) PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Similar Messages

Mid 2010 Macbook Pro sleep and external display problem

I recently upgraded to the new 2010 15 inch core i7 Macbook Pro. The problem i have is that it will not detect an external display (23inch Cinema) after waking from sleep. This happens after using the display to extend the desktop and also when using the Macbook in closed mode.
I've managed to get it to detect the display only after either restarting the Macbook completely or by going into energy saver and switching to dedicated graphics then going back to detect display.
It seems that when on integrated graphics it doesn't register that an external display is connected. If i leave a program open and running that causes the dedicated graphics to kick in then it works ok. If i close all programs, shut the macbook pros lid, computer sleeps and external display shuts off. If i click the mouse to wake with lid closed, apple logo lights, machine starts up few seconds later macbook returns to sleep. If i open the screen the machine wakes as normal but the external monitor doesn't.
Any help is much appreciated as its starting to frustrate me now...
Many thanks
oh and im running OSX 10.6.3

I thought it was intermittent to begin with until i started looking into it. By leaving programs open, like aperture, before i put the machine to sleep it appears to wake the external monitor up without a problem. If i shut all programs or leave basic things open like safari and mail which don't require the dedicated graphics, then upon wake it wont register an external screen is connected.
Manually detecting displays in settings doesn't work.
Disconnecting and reconnecting mini display port doesn't work.
Turning off power to cinema display and powering back up doesn't work.
To get the display going again its either 1) turn off macbook pro and re-boot or 2) re-start the machine then the display is automatically recognised. Or 3) launch a programme that kicks in dedicated graphics then manually go in and detect displays again..... like magic the display then springs to life.
No ideas anyone??

10.4.7 update and external firewire problems with HD corrupion

Dear all,
Advised by Jpfresno I started this new topic about Tiger 10.4.7 update.
I will repeat my post and what was happening 2 weeks ago:
“In 5 years 10.4.7 update was a tragedy for my Powerbook Ti 667. When I update from 10.4.6 to 10.4.7 my 300 GB firewire drive gets corrupted, after repairing it with DiskWarrior and after connecting it to my PowerBook my computer freezes and I must shut it down via powerbutton. Safari also crashes after the update.
I just erase my Hard Drive and after that install 10.4 and update with combo to 10.4.7. But I had the same problems: finder freezes with connected firewire devices and also safari when browsing. I spend a week trying to solve the problem but no luck.
Yesterday and with no firewire devices, 10.4.7 freeze and I have big trouble in order to started my powerbook!!! Even when i insert the 10.4 install DVD it did not detected my HD. Finally I get it to work and install 10.4 and combo update to 10.4.6 and everything works. My external firewire drive and safari. I already diagnose my HD with disk utility, TechTool and directories with Diskwarrior and everything is ok.
I clone my 10.4.6 to firewire, boot from it and everything is working. I let my external drive connected and finder does not freeze.
My conclusion is that the problem is 10.4.7 update. It only give me problems and I was getting crazy with it. 10.4.6 is working good and I do not advice anyone to update to 10.4.7.”
Last week after reinstalling 10.4.6 I started to have HD problems with my Powerbook 667. I did a surface scan with TechTool I it reported bad sector. Then I done a zero disk format but after a second surface scan TechTool also reported bad sector. Then I take the decision to replace my internal HD. I bought a Samsung 40GB Hard Drive and installed it on my PowerBook. Then I have done a clean installation of 10.4.6 with all applications that I need and clone it to my hard drive with Intego Personal Backup software. Everything works on 10.4.6. and external firewire drive.
After that everything is ok. But I decided to test if my problem derivates from 10.4.7 update or from previous HD corruption. Then I install 10.4.7 update on my Internal Hard Drive. Everything is working good but after connecting my external Hard Drive the finder started to freeze!!!!!!!!!. After that I tried cloning HD to external firewire with Intego personal Backup. Everything was working good but when it was finishing the backup process started to give errors!! I started panic. I interrupted the backup process but after and after restart I found something strange with 10.4.7. The system started up, I login but I could not started any application!!!??? All my application died!
Then I have done one more clean installation of tiger and 10.4.6 update.
My conclusions are that the 10.4.7 update causes all the problems that I have on my PowerBook, because I used the same methods and same software/hardware on 10.4.6 and did no have any problem.
This last two weeks were very difficult to me. I tough that these problems do not happen with Apple computers but I was wrong!!! It is very hard to me to deal with it. I always said to my friends that I never had problems with Apple computers. I accept that a hard drive died because the use of it but I can not accept that a system update cause me 2 weeks of hard problems and make me loose precious work information! I always love apple computers and Apple OS but now I am disappointed
If anyone can explain what happen or have a solution for those problems?
Thanks for the comprehension and collaboration.
Best Regards
Mac OS X (10.4.6)

Hi, alsvieira.
There are some things you did not check in all of your troubleshooting:
1. Run the Apple Hardware Test (AHT) that came the affected computer. See my "Apple Hardware Test" FAQ for comprehensive advice on using the AHT in troubleshooting.
2. re: FireWire troubleshooting: Here is some general troubleshooting advice that may help if problems return with your FireWire drive:1. Review the AppleCare Knowledge Base document "What to do if your computer won't recognize a FireWire device".
2. If this problem occurred after installing a recent Mac OS X Update, and you are also unable to mount CDs, DVDs, or disk images perform the steps in this Mac OS X Hints article. This worked under Panther and may also work in certain situations under Tiger.
3. Power-on the FireWire drive before starting up (booting) your Mac.
4. Reset PRAM and NVRAM.
5. Resett the power-management chip in your Mac.
6. Try a different FireWire port. James Wiebe, CEO of WiebeTech, has published FireWire Port Failures in Host Computers and Peripheral Devices, a white paper providing backgroud information and technical analysis concerning the causes of failure for FireWire ports. This may provide additional diagnostic information.
7. Micromat TechTool Pro version 4 can test the FireWire bus in your computer: this tests the bus — not the ports — but if the problem is on the FireWire bus on the logic board, it should reveal it.
8. Check with the manufacturer of your FireWire drive or enclosure to see if any firware updates are available for such.
9. Hopefully, the partition map on the FireWire drive is not damaged. This can happen if the FireWire drive was not Ejected before being disconnected or powered off. If it still refuses to mount, you may need to employ data recovery tools or services: see my "Data Recovery" FAQ.Note that some of the information above is from the "FireWire Problems" chapter of my book, Troubleshooting Mac® OS X.
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

I need help with this Time Capsule and External HD problem!

my time capsule is working perfectly and i decided to hook up a seagate 500 external hd thru the usb on the back of the time capsule!
well i can see both drives on my macbook and i can transfer files from my mac to both hd with a breeze
one major problem i cannot extract files from my external hd only put files in! i tried checking the setting and everything but with no avail! anyone have this problem and how did they fix it? thank you!
Message was edited by: aphextwin007

Try connecting another USB storage device to the TC - HDD or memory stick. Format the device while it's connected to the TC, then try writing and reading to it.
It does seem very odd that you can write to the HDD but not read from it. Presumably when you copy files to it they appear in Finder - you can see them OK? Do they appear to be the right size ("get info", or click in "columns" view). What exactly happens if you try to drag them back to the desktop?
I can only think that you may have a hardware or formatting problem, hence trying a different, freshly formatted, drive.

JTAPI, CallManager 3.3 and external calls problem

Hi everyone,
I'm putting together an application that uses JTAPI to track call times.
When I'm tracking an internal call, the call time is pretty much exact and my application gets notified about all call events.
But when tracking external calls (calls that go to the public telephone network) I've noticed that as soon as the call is directed to the router (a Cisco 3800), CallManager sends a connected event when in fact the phone on the other side is still ringing.
Even if the external call never gets answered I get a connected (active call) event.
I have a trace dump of my application that shows the events when they happen and I can provide that if needed but for now I was wondering what, if anything, should be configured either in CallManager 3.3 or the Cisco 3800 so that events are triggered correctly, i.e. get one connected event when the call is actually answered and not when CallManager passes the call to the router.

Hey all
Just got a 17" i7 MBP a few weeks ago, anxious of all the spinning beachball freezes people have reported in the Apple forums. Thankfully, I have none of these problems, however, I have a problem that's just as annoying.
I have my laptop connected to an Eizo 24" Widescreen via a display port to DVI adapter, using the extended desktop functionality. I started fine, and I have pretty much the external monitor connected 90% of the time. But then after a few days (and this happens now 2-5 times ever day), the screens will go black, once entering sleep mode for the screens only, and I can't wake them up, only do a hard reboot via the power button. it's really annoying, as I can't leave the monitor plugged in, while I go do other stuff. When the MBP is on it's own, there's no problem.
Also, sometimes when starting up, a few seconds into the desktop showing, I get severe graphics corruption, all kind of colours on both monitors, and I can only o a hard reboot to recover it. No problem as well when only using the MBP without the external monitor.
The only good thing about these problems are that wen I push the machine hard (I am a graphic designer, so it get's pushed to max maybe 5 hours a day), there's no problems what so ever, it's like it's more tend to crash when cold. No problems during intense gaming as well.
I run solely on the geforce card, as I have read a lot of problems are due to the switching of cards.
Anyway, just wanted to chime in, hopefully Apple will deliver a solution for this soon. My old 2007 MBP was rock-solid, and so far this has been the least stable Mac I have owned. Love it still though.
Lars

T60p, Vista and External Displays Problem

I have a T60p with the ATI video running Vista that in the office gets dropped on a docking station and has 2 displays conncted to it, one through the DVI connection and one through the analog connection. If I start the machine with it on the docking station it uses the DVI display as the primary and the VGA/analog one as the secondary. That is fine.
When I leave the office I use it as a laptop or sometimes at home I'll drop it on another docking station that doesn't have anything but a network connection and sometimes an external drive connected to it, and then RDP to it from one of my home machines. When I come back to the office the display setup is always confused.
Usually it will reverse the 2 displays making the analog one the primary (this is very annoying), but sometimes it will only display to one of the external displays and sometimes it will just display to the built in display and to neither external display even though the thing is in the docking station and the lid closed. Nothing seems to fix this when it happens... I can go to the display adaptor settings or the ATI control pannel and swap the display positions, but it still treats the analog as the primary (start menu, taskbar...) which I don't want, and if I reboot it it will go back to using the DVI as primary no matter what I leave the display settings at.
Any ideas how to get it to do the same thing every time it's on the docking station in my office? (I don't care what it does on the docking station at home, I if it's on that docking station it only gets RDP'ed into)

Thinking out loud... is it possible it's the docking station? One of my guys here at work has done a little research about similar problems one of our users is having and there appeares to be some evidence that swapping docking stations might fix it.

IPod 4 touch and external gps problem

Hello.
iPod 4 touch with iOS 6.1.3 is connected to Pioneer AppRadio2. Everything works great only the external gps. The problem has started when the iPod has
been updated to 6.1.3. I've tried restart and reset device, changed privacy and location settings, changed time settings, but nothing helped. The problem is still
here and navigation is now useless.

Have you tried the standard fixes
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset the GPS/Pioneer unit
- Go to the unit's support site
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
Could be the IOS update broke compatibility
after updating to iOS 6 gps signals are...: Apple Support Communities
TS1702 magellan External gps not...: Apple Support Communities

H87M-P33 and external controller problem

I have MB MSI H87M-P33. I installed external PCI-E 1x SATA RAID controller (LSI) 3Ware 9650SE-2LP (controller firmware v4.10.00.027). When I power-up PC, controller initialization goes normal and system booting up. If I do software restart or reset by reset button, controller disappears. In BIOS boot list disappears to. I do power-off and when power-on, controller initialization goes normal, system boot. On other MB this problem not appear. Controller firmware is latest. BIOS version of MB MSI H87M-P33 latest v2.2 and was flashed to v2.3b3 problem still present.
How to resolve this problem? New bios version with correction?

FPT will fully erase the previous bios and ME extension then re-write. It is worth trying to re-flash it via FPT as that has been found to fix some issues. (remnants of old bios etc causing issues)
I was suggesting to test with a single stick of ram in the primary DIMM.
Most likely you will need to report this to MSI / LSI, but it is worth a shot.
>>How to contact MSI.<<

T60 2007-FUG ATI X1400 Windows 7 64-bit projector and external display problem

I have Windows 7 64-bit Enterprise on my T60. I have tried to install many different ati drivers, but nothing seems to work. I cant use a projector or external display via VGA port. I heard that if I boot with a projector then it works ok.
I have installed Ati Install Manager and so on. I have uninstalled drivers etc. I have search forums. I installed all updates from Lenovo site. BIOS is up to date. I installed X1400 driver from Windows update site. Driver date is 1.12.2008. I cant update it. Everything else works super.
What to do?

Looking at the ATI drivers on the T60 support site, I do not see one that supports Win7....don't know if there is a plan to.
You probably have basic functionality with the Vista driver, but I would not imagine that all options will be available.
If you cannot get the external VGA port to work through the Catalyst Control Center, then I would would chalk it up to a lack of Win7 support.
Regards

Internal and external domain problem

Host: oserver. sbsrv. local (internal address)
Version: 10.1.2.0.2
Installation Type: Portal and Wireless
I have installed the oracle portal and works well in the internal network.
The problem:
When I try to access from public domain (www.mycompany.com) i get the welcome page from application server (fine) ,but if I press the link (log on to Oracle Application Server Portal) it redirects me to the internal address (http://oserver.sbsrv.local/portal/page?_pageid=0,1&_dad=portal&_schema=PORTAL)
I edit httpd.conf (Apache) and i change the line from ServerName oserver.sbsrv.local to ServerName www.mycompany.com and i get something like, that : ??????: ??? ???? ?????? ? ???? ????????????? ??????? ??? ?? ???? ??????
Question:
How can I map the internal domain: oserver. sbsrv. local (IP 192.168. xx. xx) with public domain www. mycompany. com (IP 62. x. x. x) ?
thanks.
Message was edited by:
user543368

I did this 3 or 4 years ago and set up the Web-Cache to act as a reverse proxy. There is a paper on Metalink that explains how to set it up but I do not have the Doc ID.
Also check out the White Paper that illustrates a different method. "Expose your Intranet Portal to the
Outside World in a Secured Manner
(aka. A Secured Inside/Outside Portal)" see http://www.oracle.com/technology/products/ias/portal/pdf/admin_security_1014_secured_inside_outside.pdf
BG...

How To : Call External Webservice from BPEL and pass SOAP Message to the WS

Hello All-
Greetings to all BPEL gurus. I am currently facing difficulties in calling an External Webservice from my BPEL Process and passing SOAP Message to it. The details are below:
1. The BPEL process, using database polling feature of DB Adapter, will get the records from the database.
2. Transform the message
3. Call the External Webservice and pass the transformed message as the input to it. However the Webservice expects the BPEL process to send SOAP headers in the input message.
I am struggling on how to put the transformed message within a SOAP envelope in the BPEL process.
If anyone had similar requirements and have successfully been able to send SOAP messages from BPEL process to an external webservice, kindly let me know.
Also if there is some kind of documentation or any link in the forum that I can refer, please let me know that as well.
I am new to Webservice integration using BPEL and would really appreciate your help.
Thanks In Advance
Regards,
Dibya

Hi Dharmendra,
I am trying to send a SOAP message from my BPEL process to a web service. I have a complete SOAP message in a complex variable defined in the wsdl for the partnerlink (web service). My problem is that when I invoke the partnerlink it fails even though the content shown in the BPEL console looks valid.
I have set up obtunnel to see what I am actually sending out from BPEL. You mention that BPEL creates the SOAP envelope automatically.
I think that my problem is a result of this automatic SOAP envelope that BPEL is creating. Do you know if there is a way to turn it off?
This is what I see in the TCP monitor, please note the double SOAP env:Body:
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <env:Body> <RCMR_IN000002NR01 xmlns="urn:hl7-org:v3" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsa="http://www.w3.org/2005/08/addressing" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<env:Header>
<wsa:To xmlns:wsa="http://www.w3.org/2005/08/addressing">http://testhost/CCS/Service_Endpoint</wsa:To>
<wsa:From xmlns:wsa="http://www.w3.org/2005/08/addressing">
<wsa:Address>http://localhost/CCS/Service_Endpoint</wsa:Address>
<wsa:Metadata>
<device xmlns:hl7="urn:hl7-org:v3">
</device>
</wsa:Metadata>
</env:Header>
<env:Body>
<RCMR_IN000002NR01>
</RCMR_IN000002NR01>
</env:Body>
</RCMR_IN000002NR01>
</env:Body>
</env:Envelope>
Any help is appreciated.
Regards,
Aagaard
Edited by: Aagaard on Oct 30, 2008 8:59 PM
Should have mentioned. I am using BPEL 10.1.3.4
Edited by: Aagaard on Oct 31, 2008 8:43 AM
I have opened a new thread for this question so as to not confuse the issue more than necessary.
How many SOAP envelopes do you really need?

XML Parse problem consuming external webservice

Hi all,
I'm testing consuming an external webservice from a WAS 6.40 client. I generated an ABAP proxy for it .
I managed to get the correct soap request out and receiving the response, but while parsing the SOAP XML response back into the output parameter, I'm running into a parse error :
- <CX_XMS_SYSTEM_ERROR>
<ID>PARSE_APPLICATION_DATA</ID>
<P1>Response Message</P1>
<P2>CX_ST_MATCH_TYPE</P2>
<P3>/1SAI/TXS00000000000000000003</P3>
<P4>XML Bytepos.: 354 XML Path: root(1)ns1:checkValidSerialNumbersResponse(1)checkValidSerialNumbersReturn(1) Error Text: System expected a value for the type g</P4>
<INFO />
<CATEGORY>XIProxy</CATEGORY>
<AREA>ABAP</AREA>
<RETRY>M</RETRY>
</CX_XMS_SYSTEM_ERROR>
- <CX_XMS_SYSERR_PROXY>
<CO_AREA_ABAP>ABAP</CO_AREA_ABAP>
</CX_XMS_SYSERR_PROXY>
</cls:CX_XMS_SYSERR_PROXY>
- <cls:CX_ST_MATCH_TYPE id="o163">
The response parameter is defined as xsd:string ( and string in the generated ABAP structure ).
IF the byteposition is correct there would be a problem
with the '?' characeter being in the response.
What does the datatype 'g' mean ?
see also in the error message :
<ACTUAL_NAMESPACE />
<ACTUAL_VALUE />
</CX_ST_MATCH>
- <CX_ST_MATCH_TYPE>
<EXPECTED_TYPE>g</EXPECTED_TYPE>
</CX_ST_MATCH_TYPE>
Any ideas ? Using 2 other soap clients give no issue what soever...:(

<wsdl:definitions targetNamespace="http://shareTax.DataExchange.NonLiveSchema.Web.Service/">
u2212
<wsdl:types>
u2212
<s:schema elementFormDefault="qualified" targetNamespace="http://shareTax.DataExchange.NonLiveSchema.Web.Service/">
u2212
<s:element name="processInputXML">
u2212
<s:complexType>
u2212
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="InputXML" type="s:string"/>
</s:sequence>
</s:complexType>
</s:element>
u2212
<s:element name="processInputXMLResponse">
u2212
<s:complexType>
u2212
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="processInputXMLResult" type="s:string"/>
</s:sequence>
</s:complexType>
</s:element>
</s:schema>
</wsdl:types>
u2212
<wsdl:message name="processInputXMLSoapIn">
<wsdl:part name="parameters" element="tns:processInputXML"/>
</wsdl:message>
u2212
<wsdl:message name="processInputXMLSoapOut">
<wsdl:part name="parameters" element="tns:processInputXMLResponse"/>
</wsdl:message>
u2212
<wsdl:portType name="NonLiveSchemaSoap">
u2212
<wsdl:operation name="processInputXML">
<wsdl:input message="tns:processInputXMLSoapIn"/>
<wsdl:output message="tns:processInputXMLSoapOut"/>
</wsdl:operation>
</wsdl:portType>
u2212
<wsdl:binding name="NonLiveSchemaSoap" type="tns:NonLiveSchemaSoap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http"/>
u2212
<wsdl:operation name="processInputXML">
<soap:operation soapAction="http://shareTax.DataExchange.NonLiveSchema.Web.Service/processInputXML" style="document"/>
u2212
<wsdl:input>
<soap:body use="literal"/>
</wsdl:input>
u2212
<wsdl:output>
<soap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
u2212
<wsdl:binding name="NonLiveSchemaSoap12" type="tns:NonLiveSchemaSoap">
<soap12:binding transport="http://schemas.xmlsoap.org/soap/http"/>
u2212
<wsdl:operation name="processInputXML">
<soap12:operation soapAction="http://shareTax.DataExchange.NonLiveSchema.Web.Service/processInputXML" style="document"/>
u2212
<wsdl:input>
<soap12:body use="literal"/>
</wsdl:input>
u2212
<wsdl:output>
<soap12:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
u2212
<wsdl:service name="NonLiveSchema">
u2212
<wsdl:port name="NonLiveSchemaSoap" binding="tns:NonLiveSchemaSoap">
<soap:address location="http://89.234.8.200:8085/shareTaxDataExchangeWebService/NonLiveSchema.asmx"/>
</wsdl:port>
u2212
<wsdl:port name="NonLiveSchemaSoap12" binding="tns:NonLiveSchemaSoap12">
<soap12:address location="http://89.234.8.200:8085/shareTaxDataExchangeWebService/NonLiveSchema.asmx"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
I am facing same problem.
This is WSDL. Could you please tell if anything is wrong in WSDL?
I am not aware of WSDL files.

Problem in assiging header to invoke an external webservice.

HI,
I want to assign some additional elements to the header when invoking an external webservice.
I am creating a variable named customHeader and it contains an element of anytype.
later in the assign activity i am assigning the following
<copy>
<from expression="ora:parseEscapedXML('<payload><payloadManifest xmlns="http://www.starstandards.or/webservices/2003/12/transport"><manifest xmlns="" id="Content0" namespaceURI="http://www.starstandards.org/STAR" element="ProcessSalesLead"/></payloadManifest></payload>')"/>
<to variable="customHeader"
query="/client:CustomHeader"/>
</copy>
so in the soapmessage the header is added as below:
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:x
sd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchem
a-instance"><env:Header><CustomHeader xmlns="http://xmlns.oracle.com/BODMessageS
ender"><payload xmlns=""><payloadManifest xmlns="http://www.starstandards.or/web
services/2003/12/transport"><manifest id="Content0" namespaceURI="http://www.sta
rstandards.org/STAR" element="ProcessSalesLead" xmlns=""/></payloadManifest>
but I donot need that customHeader part to be added.My header should be like this:
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<soap:Header>
<payloadManifest xmlns="http://www.starstandards.org/webservices/2003/12/transport">
<manifest id="Content0" namespaceURI="http://www.starstandards.org/STAR"
element="ProcessPartsOrder" />
</payloadManifest>
</soap:Header>
<soap:Body>
<ProcessMessage xmlns="http://www.starstandards.org/webservices/2003/12/transport">
<payload>
<content id="Content0">
<ProcessSalesLead>
</ProcessSalesLead>
</content>
</payload>
</ProcessMessage>
</soap:Body>
</soap:Envelope>
can anyone Please help me on this.This is very urgent.
Thanks in advance
deepthi.

anybody has idea about this .Please let me know.

I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you have too many live channels

I'm frustrated, I am doing everything you recommend, I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you ave too many live channels, the disk is slow prepare...can you help?

Quote from: Richard on 15-November-07, 20:33:05
tornado2003,
What you need to do is boot into Safe Mode. Then delete the VGA Drivers.
After that boot normally and install the latest nVidia ForceWare Drivers
Take Care,
Richard
i guess you missed that:
Quote from: tornado2003 on 15-November-07, 17:26:52
ive tryed booting xp in safe mode but it just freezes after it loads up a couple of needed files .
ive even formatted my hard drive and tryed installing a fresh xp on it but it just keeps locking up when it gets to the "starting windows setup" .(this is just after it loads all the drivers from the xp cd)

I purchased a MyBook Studio 4gb external hard drive. I can't get it to work properly. WD have assessed it and say its fine and that the problem is with Apple?

I purchased a MyBook Studio 4gb external hard drive. I can't get it to work properly. WD have assessed it and say its fine and that the problem is with Apple? Any ideas?

Hello EucaBlue!
So in Disk Utility, with the external harddrive selected, go to the Partition tab, and then under "Partition Layout:" select 1 Partition.
After than, verify that it is formatting the drive as "Mac OS Extended (Journaled) under "Partition Information"
Also verify that it's using using the GUID Partition Map under the Options button at the lower left of this window.
Then click apply and confirm that you want to format the drive. It will ask you if you're sure, and probably for an Administrator password.
Once your harddrive is formatted properly, you should be able to use Time Machine, or any other Mac backup software.
Happy tinkering!
Paul

SchedulerTask and external webservice problems

Similar Messages

Maybe you are looking for