Scheduline Date to follow Past Date
Dear SD Expert,
My users are doing a back log for Sales Order in December 2008 & January 2009.
In Sales Order i enter the Request Delivery Date as a past date, i will then proceed to enter my materials to be sold.
But in the schedule line of the material is has 2 lines:
1. First line is the past date
2. Second line is today's date (greyed out)
Now i know system does an ATP that's why its giving today's date. But is there a way to configure the schedule line to follow a past date instead of proposing a second line which is today's date?
Please advise. Thanks.
Regards,
LEE
Dear Lee,
Scheduline lines will be happened based on the material availability.
For Example:- If you create sales order on today and material is available today then scheduline will get conformed on today itself.
-->If stock not available system will generate the another scheduline in the future date with conform quantity.
-->If the stock is not available then system will calculate conform date or material availability date based on the material Replenishment leade time.
+But is there a way to configure the schedule line to follow a past date instead of proposing a second line which is today's date?
So through configuration you can't change material conformation dates in the scheduline this is depend upon the availability of the material.
I hope this will help you,
Regards,
Murali.
Similar Messages
-
How to cummulate the quantity based on the date condition?
hi,
In my query,i need to cummulate the open quantity based on the two date condition.
If my Schedule line date > system date, i need to cummulate the open quantity.
But in my query level i am getting 0 or 1 based on the above condition.
i am struggling to cummulate the open qty based on the above condition.
can any body throws an idea to resolve my issue.
Regards,
ravi.Thanks for suggestion,Almost i narrow down my issue to get the proper result.
But i have one doubt.
Is it possible to user Formula variable (Processing by replacement path-Reference char as Scheduline date) in my Calculated Key Fig calculation.?? But here i am created Scheduline date as Characher infoobject.
Actually i am created Scheduline date as Character InfoObject,If i am using the following condition like
(Schedule line date > system date) its throwing "X" value.
For the above issue,if i am changing the Scheduline date as Key figure InfoObject means i will get the proper output for the condition(Schedule line date > system date) either 0 or 1.
Is it correct????
Regards,
Ravi. -
Hi SAP Prof,
1.what are the possible questions in Header level data, Item Level data and scheduline data.Dear Rajesh Johnston,
I would request you to spend some time with ths link. It will help you to get the overview of SAP SD module. http://sap-img.com/sap-sd.htm
If you go to the search on SDN forum you will find lot of help on the similar data.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh
P.S. you can send me a mail at my mail id [email protected] for any specific details -
Pasta Landscape Printing via XML Publisher
Hi ,
I have followed Pasta Config Guide 3.0 .
We're on 11.5.10 and Purchase Orders Report(Both Landscape and Portrait are configured - two separate "reports") via XML Publisher comes out fine in PDF in Portrait and Landscape when viewing the PDF , but when I set the conncurrent request to print to a printed , the Portrait report prints Portrait , but the Landscape report prints on Portrait. (Im missing the whole right hand side of the data)..
Any ideas?
Cheers
StephenHi ,
Sorry , should have replied earlier...
I actually turned off the ps2pdf in the config files and the PDF printed direct perfectly both Landscape and Portrait.
I had followed the Past Config Guide to the tee which was the pain !!
Cheers
Stephen -
Join with count() issue, please help!
Hello All,
I have this (probably really simple) issue that I cannot seem to resolve...I have 2 tables here (tbl_system_engineer and tbl_task_request)...(only relevant columns are listed below)
tbl_system_engineer
- id NUMBER
- full_name VARCHAR2
tbl_task_request
- tr_number NUMBER
- submitted_on_date DATE (date task was submitted)
- ass_comp_date DATE (date task is due)
- closed_date DATE (date task was officially closed)
- requestor NUMBER (the system engineer id, the person who created this task)
The query is supposed to summarize how many of the system engineers tasks are as followed:
- "past completion date" - how many tasks have tbl_task_request.closed_date > tbl_task_request.ass_comp_date OR SYSDATE > tbl_task_request.ass_comp_date for the engineer
- "Approaching Completion Date" - how many tasks have a tbl_task_request.ass_comp_date in this month but not "past completion date" for the engineer
- "On Schedule" - how many tasks have a tbl_task_request.ass_comp_date > the end of SYSDATE month and year
The result set rows are supposed to look like...
"System Engineer full name", past completion date count, approaching completion date count, on schedule count
Please help!Hi,
Welcome to the forum!
That's an example of a Pivot , where you want to GROUP BY a combination of columns, and have some of the columns appear as different columns, not different rows.
The way to do that is to GROUP BY the expression(s) for which you want rows, and use CASE expressions for the others.
For example:
SELECT e.full_name
, COUNT ( CASE
WHEN r.closed_date > r.xyz_comp_date
OR SYSDATE > r.xyz_comp_date
THEN 1
END
) AS overdue
, COUNT ( CASE
WHEN xyz.comp_date < ADD_MONTHS ( TRUNC(SYSDATE, 'MONTH')
, 1
AND r.closed_date <= r.xyz_comp_date
AND SYSDATE <= r.xyz_comp_date
THEN 1
END
) AS approaching
, COUNT ( CASE
WHEN xyz.comp_date >= ADD_MONTHS ( TRUNC(SYSDATE, 'MONTH')
, 1
THEN 1
END
) AS on_schedule
FROM tbl_system_engineer e
JOIN tble_task_request r ON r.requestor = e.id
GROUP BY e.full_name
;I don't have versions of your tables, so I can't actually test this. I suspect that some consideration for NULLs needs to be added to the CASE conditions.
if you post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) then people can test their ideas.
Sometimes, especially when the columns are mutually exclusive, it's simpler to calculate a value in a sub-query, telling with which column of output each row is associated. That computed value is then used in very simple CASE expressions in the main query,
Among the annoying features of this site is ithat ir replaces what it thinks are naughty words with s. I suspect that happend in your post. I assume all the columns with ** are the same, for which I substituted above. -
Hai experts
I need one report in SD regarding party ordered 100 quantity on 19.11.2008
First delivery 19.11.2008 50 quantity
Second delivery 30.11.2008 20 quantity
Third delivery 25.12.2008 30 quantity
These r the scheduline dates my report is total ordered quantity, first delivered quantity with dates second delivery quantity with dates pending quantity to be delivered with date.
where I will i get
thankuGo to SQVI and do the following:-
- Give some description in "Quickview"
- Click "Create" button
- Give some description in "Title"
- From the tab "Data Source", select "Table Join" and click blue tick
- Press "Shift + F1"
- Give the table you wanted and press enter
- Again Press "Shift + F1"
- Again give the table you wanted and press enter
- Press F3
- On your left screen you can see those two tables with header "List fields" and "Selection Field"
- Whatever data you want to give as input, (say for example based on sales organisation, you want some report), select the white box under selection field
- Whatever data you want as report format, select those fields under "List fields"
- Execute the report
thanks
G. Lakshmipathi -
Compile error: How to modify .ini in 2010 SP1
Hello,
I am using the attached VI to stack cycles of data. Ideally, I would like to stack 200-300 cycles, but anytime I get above 100-125 shift registers/cycles, the VI will not compile. After 20-30 minutes, the error "out of memory exception caught in llvm gencode" appears.
Follow past searches, I have increased the virtual memory as detailed below, which did not solve my problem.
http://zone.ni.com/reference/en-XX/help/371361G-01/lvhowto/enable_lrg_ad_aware/
I see this posting detailing modifying the .ini file as another possible solution.
http://digital.ni.com/public.nsf/websearch/BA4B9038D01F3C99862577CA004BE1AD?OpenDocument
Being unfamiliar with modifying the .ini file, how do I exactly do this? Is it as simple as adding a line "LLVMLargeVIThreshold=12000" ? (or something greater than the standard 7500 value). I have adding this line to the .ini file and still get the compiler error llvm issue.
Any other suggestions or thoughts? I dont want to have to roll back from 2010SP1 in order to be able to run this vi and get around this issue...
Thank you
Attachments:
cyc_.vi 513 KBI can get it above 200 shift register elements and still get it to compile, but that may be due to system differences.
However, that design does not scale well. Any time you want to change the number of elements you need to modify the program.
Have you considered a queue of datatype Array of Double?
If you look at buffer allocations in your program you get one buffer for each shift register element and one for the 2D array. Each must have contiguous memory due to the way arrays are stored in memory. If the input array array grows in length, then all of the buffers need to be reallocated. This should be a run time problem rather than compile-time, but the compliler may try to do some optimizations, particularly since it knows all the shift register buffers will be the same size.
The Queue stores each array separately and the arrays can be different lengths. To get all the data, use Get Queue Status with return elements? set True. This will return an array of clusters with each cluster containing one of the input arrays.
Lynn
Attachments:
cyc_3.vi 7 KB
test Array of Queues.vi 10 KB -
DP_How to lock KF in the interactive Planning table
Dear Expert!
I want to lock the data in the Interactive Planning table according to each Key figure and a period of time (that mean I can not change the data of KF after locked). How can I do?
e.g: I created a Planning book and data view with following Key Figure:
- Forecast
- GDP
- CPI
- Historical Data
And the time bucket profile of this planning book as following:
- Past: 24 months
- Future: 12months
Now, I want to lock data of the KF "Forecast" in all past and future; lock data of other KF (GDP, CPI, Historical data) in past period.
How can I do now!
I hope to know the question soon. Thanks for your support!
LeGiangHi LeGiang,
If you would like to not allow any manual input for ALL the key figures in the past, then the solution for this "history" part would be quite easy.
When you define the planning view, specify the "input from" date as the current date. This way, no-one would be able to change any data in the past manually.
The above would also take care of not allowing any manual changes to "Forecast" in the past.
If however, you want only certain KFs should be non-editable while others should be editable, then you should use the function CELL_INPUT:
Syntax would be like
<Macro Name>
<Step Name> ( <Maintain 'processing Area' as 'past'>)
Cell: <Key Figure Row name> ( Attributes ) =
CELL_INPUT(0)
In above, remember that in <Step> row, you should double-click and change the value of the field 'change scope' to "attributes" from 'values'.
For the future and past, if you want that Forecast should be non-editable, then you could do this by another macro. Define a default macro that would change the attribute of the KF for Forecast as "no input allowed" for all the time periods. You could do this by using the function ROW_INPUT.
Your macro would look like -
<Macro Name>
<Step Name> : ( 1 Iterations :INITIAL;INITIAL )
Row: <Key Figure name e.g. Forecast> ( Attributes ) =
ROW_INPUT( 0)
In the row line above, remember to double click and change the value of the field 'change scope' to "attributes" from 'values'.
If you need more help, do let me know. This second macro would actually make the whole row non-editable. You could create these macros as a default macro, and have them run in the end after the other default macros.
Thanks - Pawan -
Activate extended classic scenario
Hello, when I try to activate extended classic scenario to create contracts in SRM and then transfer them to R/3 I have these options:
Extended local PO
BE Purch Grps Resp.
Back-end check reqd
Back-end errors, show as error msg
Which options may I have to select?
Thanks in advanceHi,
I think Rosa's requirement is to create a manual and local contract in SRM. Indeed you mentioned an excellent BADi, but my understanding is this badi gets called from the sourcing application. I am not sure whether this gets called from the SRM local contract. This is the help documentation I am pasting here. It would be wonderful if this works. See the highlighted "importing parameters" part of the following pasted one.
Thank you,
DV
Determine Target System of Contract
Use
With method CONTRACT_LOGSYS_DETERMINE, you can control the target system determination for contracts.
In the standard, the Sourcing application and SAP Bidding Engine create contracts locally in SAP Enterprise Buyer . With this method, you can create a contract in the backend system instead.
Requirements
You are using a backend system with Release 4.6B or higher.
You have created the logical system in activity Define Logical System
Parameters
Importing
The BAdI takes this data from requirements in SAP Bidding Engine (bid) or from requirements in the Sourcing application.
IT_HEADER
Header structures
IT_ITEMS
Item structures
IT_PARTNER
Business partner data such as vendor or location
IT_ORG
Organizational data
Changing
In the method you can overwrite the following field:
CV_LOGSYS
Name of the system in which a contract is to be created.
If this field remains empty or contains the name of the local system, then the contract is created locally.
If this field contains the name of a backend system, then the contract is created there.
Notes
When coding the method, use the delivered sample coding as a guide.
See also
BAdI Determine Backend System / Company Code -
Error in package while deploying in jDev 11g
Hi,
I am following tutorial at http://static.springsource.org/docs/Spring-MVC-step-by-step/part1.html . I am using jDev 11g as IDE and its integrated weblogic as server.
I did made index.jsp and web.xml as said in the tutorial. In the step *"1.8. Create the Controller"* where HelloController.java is created, I am getting following error.
Project: C:\JDeveloper\mywork\springapp\NewProj\NewProj.jpr
C:\JDeveloper\mywork\springapp\NewProj\src\springapp\web\HelloController.java
Error(3,43): package org.springframework.web.servlet.mvc does not exist
Error(4,39): package org.springframework.web.servlet does not exist
Error(11,34): package org.apache.commons.logging does not exist
Error(12,34): package org.apache.commons.logging does not exist
Error(16,41): cannot find symbol
Error(18,21): cannot find class Log
Error(20,12): cannot find class ModelAndView
Error(18,34): cannot find variable LogFactory
Error(25,20): cannot find class ModelAndView
But I hv included the jar files in library by Tools-> Manage Libraries. Also Deploy by Default is checked.
Kindly check the link below to see the screen shots of included libraries and error.
https://docs.google.com/open?id=0B1QmVEE-TXMpYTc1NTE2NDItYWQ5NC00NGZkLWJjMTAtMTJiZmNkMTE4Zjg5
https://docs.google.com/open?id=0B1QmVEE-TXMpODAyMWM3YjItMTZjMC00NGMzLTkyN2MtMDMxNDE4ZGM5YWQ1
https://docs.google.com/open?id=0B1QmVEE-TXMpZDIyZjYyM2YtYzZkMy00NzJmLTliMDQtMjQzYWE5NTllODE2
Please guide me.Hi,
Try as follows
paste relevant libraries to
"*C:\Documents and Settings\YourLogin\Application Data\JDeveloper\system11.1.1.3.37.xx.xx\DefaultDomain\lib*" path
and restart the server.
[This is the domain library directory and is usually located at $DOMAIN_DIR/lib.
The jars located in this directory will be picked up and added dynamically to the end of the server classpath at server startup. The jars will be ordered lexically in the classpath. The domain library directory is one mechanism that can be used for adding application libraries to the server classpath.
-Suresh -
Another problem variation on the "using terms from"
Using either Script Editor.app or Script Debugger, the following pasted into the editor window works:
set AppName2 to "Finder"
set WinName2 to "Photos"
tell application AppName2
set WinBnds to bounds of window WinName2
end tell
(as long as there is a window "Photos" open)
BUT
if the very same code appears, isolated, in a handler of a script, there's a "can't make bounds into type reference" error. None of the tricks discussed earlier (using terms from) changes that.
So I assume there must be some special approach for doing this within a handler. I also assume the problem is to somehow pass the terms of Finder.app to the handler. If so, how might that be done?
(In this test, AppName2 and WinName2 are being defined as shown, in the handler)Hello Noaks,
My first and only guess is that you're using a repeat loop in the form — 'repeat with loopVariable in <list>' — and using the loopVariable directly without de-referencing it. This sort of loopVariable is indeed 'a reference to item k of <list>', not the 'item k of <list>' itself, and it will cause problem when used directly in equality test and also it may cause error -1700 when used directly in application's object specifier:
-1700 errAECoercionFail Data could not be coerced to the requested descriptor type
-1700 errOSACantCoerce A value can't be coerced to the desired type.
The solution is to de-reference it by getting its 'contents' explicitly.
E.g., run the following code with and without the line marked with '-- # required' and see the results. Here it's assumes there're at least two Finder windows open.
--SAMPLE CODE
tell application "Finder"
set {n1, n2} to name of windows
end tell
return getBounds("Finder", n1, n2)
on getBounds(appn, n1, n2)
set rr to {}
tell application appn
repeat with n in {n1, n2}
--set n to n's contents -- # required
try
set end of rr to {name, bounds} of window n
on error errs number errn from erob
set end of rr to {errs, errn, erob}
end try
end repeat
end tell
return rr
end getBounds
--END OF SAMPLE CODE
cf.
ASLG > Control Statements > repeat Statements > repeat with loopVariable (in list)
http://developer.apple.com/documentation/AppleScript/Conceptual/AppleScriptLangG uide/
If this is not the case, I have no idea about what is going on in your script.
Cheers,
H -
DPM 2012 R2 installation error ID: 812
Server 2012 R2 Datacenter (virtual).
Installed SQL server 2012 SP1 locally, with all default settings.
Changed accounts according to DPM requirements for agent, server and reporting services
DPM setup complains as below, reporting service is running and, I believe, it is configured correctly, any clue ?
(error log is available, but does not give me valuable information).
EDIT:
Just realized that reporting services relies on web server so I installed IIS and fiddled a little with reporting services encryption key which brought me to the next error as follows:
Pasted from error log (just prior to error):
Information : Querying WMI Namespace: \\dpm01\root\cimv2 for query: SELECT * FROM Win32_Service WHERE Name='SQLSERVERAGENT'
Information : Sql Agent account name = ad\DPM01$
Information : Add user: ad\DPM01$ to local group: Distributed COM Users on server: DPM01
I don't know the ad\DPM01$ user, however it looks like it is the builtin Local System
I also tried to add this builtin to the group manually, but DPM still reports error.
Is DPM really designed to be so complicated and giving so much headache ?
Anyone able to help me out ?[19.3.2014 9:21:22] Data : checkId = SQLServerService
[19.3.2014 9:21:22] Information : Running the check: SQLServerService
[19.3.2014 9:21:22] Information : Getting the check for the checkId : SQLServerService
[19.3.2014 9:21:22] Information : Calling the method: CheckSqlServerServiceConfig
[19.3.2014 9:21:22] Information : Check SQL Server service configuration.
[19.3.2014 9:21:22] Data : SQL Server instance name = MSDPM2012
[19.3.2014 9:21:22] Information : Querying WMI Namespace: \\MyDpmServer\root\cimv2 for query: SELECT * FROM Win32_Service WHERE Name='MSSQL$MSDPM2012'
[19.3.2014 9:21:22] Data : Credentials of the service = MyDomain\sqlsvc
[19.3.2014 9:21:22] Information : SQL Server service configuration is correct.
[19.3.2014 9:21:22] Information : Adding the check result entry for checkId: SqlServerService and result: 0
[19.3.2014 9:21:22] Information : Got Error Message: Check Succeeded
[19.3.2014 9:21:22] Data : Result = 0
[19.3.2014 9:21:22] Data : checkId = SqlServerReportingServices
[19.3.2014 9:21:22] Information : Running the check: SqlServerReportingServices
[19.3.2014 9:21:22] Information : Getting the check for the checkId : SqlServerReportingServices
[19.3.2014 9:21:22] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\SqlServerReportingServices.
[19.3.2014 9:21:22] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\SqlServerReportingServices is absent.
[19.3.2014 9:21:22] Information : Calling the method: CheckSqlServerReportingServices
[19.3.2014 9:21:22] Information : Check if SQL Server 2008 Reporting Services is installed.
[19.3.2014 9:21:22] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services.
[19.3.2014 9:21:22] Information : Querying WMI Namespace: \\MyDpmServer\root\Microsoft\SqlServer\ReportServer\RS_MSDPM2012\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='MSDPM2012'
[19.3.2014 9:21:22] Data : Path of configuration file for SQL Server 2008 Reporting Services = C:\Program Files\Microsoft SQL Server\MSRS11.MSDPM2012\Reporting Services\ReportServer\RSReportServer.config
[19.3.2014 9:21:22] Information : Adding the check result entry for checkId: SqlServerReportingServices and result: 0
[19.3.2014 9:21:22] Information : Got Error Message: Check Succeeded
[19.3.2014 9:21:22] Data : Result = 0
[19.3.2014 9:21:22] Data : checkId = SqlReportServerService
[19.3.2014 9:21:22] Information : Running the check: SqlReportServerService
[19.3.2014 9:21:22] Information : Getting the check for the checkId : SqlReportServerService
[19.3.2014 9:21:22] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\SqlReportServerService.
[19.3.2014 9:21:22] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\SqlReportServerService is absent.
[19.3.2014 9:21:22] Information : Calling the method: CheckRosettaServicesConfig
[19.3.2014 9:21:22] Information : Check SQL Server 2008 Reporting Services report server service configuration.
[19.3.2014 9:21:22] Information : Querying WMI Namespace: \\MyDpmServer\root\cimv2 for query: SELECT * FROM Win32_Service WHERE Name='ReportServer$MSDPM2012'
[19.3.2014 9:21:23] Data : Credentials of the service = MyDomain\sqlsvc
[19.3.2014 9:21:23] Information : Report Server service configuration is correct.
[19.3.2014 9:21:23] Information : Adding the check result entry for checkId: SqlReportServerService and result: 0
[19.3.2014 9:21:23] Information : Got Error Message: Check Succeeded
[19.3.2014 9:21:23] Data : Result = 0
[19.3.2014 9:21:23] Data : checkId = ActiveDirectory
[19.3.2014 9:21:23] Information : Running the check: ActiveDirectory
[19.3.2014 9:21:23] Information : Getting the check for the checkId : ActiveDirectory
[19.3.2014 9:21:23] Information : Calling the method: DetectActiveDirectory
[19.3.2014 9:21:23] Information : Adding the check result entry for checkId: ActiveDirectory and result: 0
[19.3.2014 9:21:23] Information : Got Error Message: Check Succeeded
[19.3.2014 9:21:23] Data : Result = 0
[19.3.2014 9:21:23] Data : checkId = SQLEval
[19.3.2014 9:21:23] Information : Running the check: SQLEval
[19.3.2014 9:21:23] Information : Getting the check for the checkId : SQLEval
[19.3.2014 9:21:23] Information : Calling the method: DetectSqlEval
[19.3.2014 9:21:23] Information : Detect if SQL Server is evaluation edition
[19.3.2014 9:21:23] Information : Starting service
[19.3.2014 9:21:23] Data : Service name = MSSQL$MSDPM2012
[19.3.2014 9:21:23] Data : Current status of service = Running
[19.3.2014 9:21:23] Information : Service is already running
[19.3.2014 9:21:23] Data : Edition = Standard Edition (64-bit)
[19.3.2014 9:21:23] Information : Adding the check result entry for checkId: SqlEval and result: 0
[19.3.2014 9:21:23] Information : Got Error Message: Check Succeeded
[19.3.2014 9:21:23] Data : Result = 0
[19.3.2014 9:21:23] Data : checkId = ClientTCPEnabled
[19.3.2014 9:21:23] Information : Running the check: ClientTCPEnabled
[19.3.2014 9:21:23] Information : Getting the check for the checkId : ClientTCPEnabled
[19.3.2014 9:21:23] Information : Calling the method: CheckIfClientTCPEnabled
[19.3.2014 9:21:23] Information : Check if SQL Server has DPM Server already installed on it.
[19.3.2014 9:21:23] * Exception : Expecting the following exception. Ignoring intentionally. => System.Management.ManagementException: Invalid namespace
at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObject.Initialize(Boolean getObject)
at System.Management.ManagementObject.Get()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectPrerequisites.GetSqlToolsWMINameSpace()
[19.3.2014 9:21:23] Information : Adding the check result entry for checkId: ClientTCPEnabled and result: 0
[19.3.2014 9:21:23] Information : Got Error Message: Check Succeeded
[19.3.2014 9:21:23] Data : Result = 0
[19.3.2014 9:21:23] Data : checkId = RemoteDbDPMInstalled
[19.3.2014 9:21:23] Information : Running the check: RemoteDbDPMInstalled
[19.3.2014 9:21:23] Information : Getting the check for the checkId : RemoteDbDPMInstalled
[19.3.2014 9:21:23] Information : Calling the method: CheckRemoteDbDPMInstalled
[19.3.2014 9:21:23] Information : Check if SQL Server has DPM Server already installed on it.
[19.3.2014 9:21:23] Information : The SQL and DPM machine are same so not checking for DPM installed
[19.3.2014 9:21:23] Information : Adding the check result entry for checkId: RemoteDbDPMInstalled and result: 0
[19.3.2014 9:21:23] Information : Got Error Message: Check Succeeded
[19.3.2014 9:21:23] Data : Result = 0
[19.3.2014 9:21:23] Data : checkId = ReportingSecureConnectionLevel
[19.3.2014 9:21:23] Information : Running the check: ReportingSecureConnectionLevel
[19.3.2014 9:21:23] Information : Getting the check for the checkId : ReportingSecureConnectionLevel
[19.3.2014 9:21:23] Information : Calling the method: CheckReportingSecureConnectionLevel
[19.3.2014 9:21:23] Information : Check Reporting SecureConnectionLevel.
[19.3.2014 9:21:23] Information : Getting the reporting secure connection level for MyDpmServer/MSDPM2012
[19.3.2014 9:21:23] Information : Querying WMI Namespace: \\MyDpmServer\root\Microsoft\SqlServer\ReportServer\RS_MSDPM2012\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='MSDPM2012'
[19.3.2014 9:21:23] *** Error : ReportingConfiguration.RemoveReportingConfigurations COnfiguration file path: C:\Program Files\Microsoft SQL Server\MSRS11.MSDPM2012\Reporting Services\ReportServer\RSReportServer.config
[19.3.2014 9:21:23] Information : Setup detected that the Reporting SecureConnectionLevel is 0.
[19.3.2014 9:21:23] Information : Adding the check result entry for checkId: ReportingSecureConnectionLevel and result: 0
[19.3.2014 9:21:23] Information : Got Error Message: Check Succeeded
[19.3.2014 9:21:23] Data : Result = 0
[19.3.2014 9:21:23] Data : checkId = RemoteDbDiskSpace
[19.3.2014 9:21:23] Information : Running the check: RemoteDbDiskSpace
[19.3.2014 9:21:23] Information : Getting the check for the checkId : RemoteDbDiskSpace
[19.3.2014 9:21:23] Information : Calling the method: CheckRemoteDbDiskSpace
[19.3.2014 9:21:23] Information : Check the disk space for remote database.
[19.3.2014 9:21:23] Information : Querying WMI Namespace: \\MyDpmServer\root\cimv2 for query: select FreeSpace from Win32_LogicalDisk where DeviceID='C:'
[19.3.2014 9:21:23] Information : Remote DB disk space required : 900 MB disk space available = 1096246 MB
[19.3.2014 9:21:23] Information : Adding the check result entry for checkId: RemoteDbDiskSpace and result: 0
[19.3.2014 9:21:23] Information : Got Error Message: Check Succeeded
[19.3.2014 9:21:23] Data : Result = 0
[19.3.2014 9:21:23] Data : checkId = RemoteDbTCP
[19.3.2014 9:21:23] Information : Running the check: RemoteDbTCP
[19.3.2014 9:21:23] Information : Getting the check for the checkId : RemoteDbTCP
[19.3.2014 9:21:23] Information : Calling the method: CheckRemoteDbTCP
[19.3.2014 9:21:23] Information : Check the Named Pipes protocol for remote database.
[19.3.2014 9:21:23] Information : Adding the check result entry for checkId: RemoteDbTCP and result: 0
[19.3.2014 9:21:23] Information : Got Error Message: Check Succeeded
[19.3.2014 9:21:23] Data : Result = 0
[19.3.2014 9:21:23] Data : checkId = RemoteDbMsi
[19.3.2014 9:21:23] Information : Running the check: RemoteDbMsi
[19.3.2014 9:21:23] Information : Getting the check for the checkId : RemoteDbMsi
[19.3.2014 9:21:23] Information : Calling the method: CheckRemoteDbMsi
[19.3.2014 9:21:23] Information : Check whether the remote DB msi has been installed.
[19.3.2014 9:21:23] Information : Adding the check result entry for checkId: RemoteDbMsi and result: 0
[19.3.2014 9:21:23] Information : Got Error Message: Check Succeeded
[19.3.2014 9:21:23] Data : Result = 0
[19.3.2014 9:21:23] Information : Getting the string form of report object
[19.3.2014 9:21:23] Information : Writing the xml string into the file : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
[19.3.2014 9:21:23] Information : End Inspect.
[19.3.2014 9:21:23] Information : **************************************************************************************
[19.3.2014 9:21:23] Information : Instantiating inspect component.
[19.3.2014 9:21:23] Data : Path of output xml = \PostInstallInspect.xml
[19.3.2014 9:21:23] Information : Deserializing the check XML from path : C:\Users\administrator.MyDomain\AppData\Local\Temp\2\DPM4657.tmp\DPM2012\setup\checks.xml
[19.3.2014 9:21:23] Information : Loading the check XML from path : C:\Users\administrator.MyDomain\AppData\Local\Temp\2\DPM4657.tmp\DPM2012\setup\checks.xml
[19.3.2014 9:21:23] Information : Deserialising the scenario XML from path : C:\Users\administrator.MyDomain\AppData\Local\Temp\2\DPM4657.tmp\DPM2012\setup\scenarios.xml
[19.3.2014 9:21:23] Information : Loading the check XML from path : C:\Users\administrator.MyDomain\AppData\Local\Temp\2\DPM4657.tmp\DPM2012\setup\scenarios.xml
[19.3.2014 9:21:23] Information : Getting scenarios for the product: DPM
[19.3.2014 9:21:23] Information : Getting scenarios for DPM
[19.3.2014 9:21:23] Information : Getting scenario for Mode:Install, DbLocation:Remote, SKU:Retail and CCMode:NotApplicable
[19.3.2014 9:21:23] Information : Query WMI provider for SQL Server 2008.
[19.3.2014 9:21:23] Information : Querying WMI Namespace: \\MyDpmServer\root\Microsoft\SqlServer\ComputerManagement10 for query: Select * from SqlServiceAdvancedProperty where ServiceName='MSSQL$MSDPM2012' and PropertyName='Version'
[19.3.2014 9:21:23] * Exception : => System.Management.ManagementException: Invalid namespace
at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetWmiObjectCollection(String wmiNamespace, String wmiQuery, ConnectionOptions wmiConnectionOptions)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetSqlServerVersion(String instanceName, String sqlServerMachineName, ConnectionOptions wmiConnectionOptions, String sqlNameSpace)
[19.3.2014 9:21:23] * Exception : Expecting the following exception. Ignoring intentionally. => System.Management.ManagementException: Invalid namespace
at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetWmiObjectCollection(String wmiNamespace, String wmiQuery, ConnectionOptions wmiConnectionOptions)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.GetSqlServerVersion(String instanceName, String sqlServerMachineName, ConnectionOptions wmiConnectionOptions, String sqlNameSpace)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Inspect.InspectHelper.DetectSqlServer(String instanceName, String sqlServerMachineName, ConnectionOptions wmiConnectionOptions, String sqlNameSpace)
[19.3.2014 9:21:23] Information : SQL Server 2008 R2 SP2 instance MSDPM2012 is not present on this system.
[19.3.2014 9:21:23] Information : Query WMI provider for SQL Server 2008.
[19.3.2014 9:21:23] Information : Querying WMI Namespace: \\MyDpmServer\root\Microsoft\SqlServer\ComputerManagement11 for query: Select * from SqlServiceAdvancedProperty where ServiceName='MSSQL$MSDPM2012' and PropertyName='Version'
[19.3.2014 9:21:23] Information : SQL Server 2008 R2 SP2 instance MSDPM2012 is present on this system.
[19.3.2014 9:21:23] Information : Inspect context initialized with
SQL Server namespace: \\{0}\root\Microsoft\SqlServer\ComputerManagement11
Reporting namespace: \\{0}\root\Microsoft\SqlServer\ReportServer\RS_{1}\v11\admin
SqlServerDetected: True
[19.3.2014 9:21:23] Information : Check if SQL Server 2012 Service Pack 1 Tools is installed.
[19.3.2014 9:21:23] Information : Inspect.CheckSqlServerTools : MsiQueryProductState returned : INSTALLSTATE_DEFAULT
[19.3.2014 9:21:23] Information : Deserialising the Report XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
[19.3.2014 9:21:23] Information : Loading the check XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
[19.3.2014 9:21:23] Information : Getting the checkResult for the checkId : SqlServer
[19.3.2014 9:21:23] Information : Getting the checkResult for the checkId : SqlServerReportingServices
[19.3.2014 9:21:23] Information : Getting the checkResult for the checkId : SqlServerTools
[19.3.2014 9:21:23] Information : Getting the installables which were not detected
[19.3.2014 9:21:23] Information : Getting the string form of report object
[19.3.2014 9:21:23] Information : Writing the xml string into the file : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\\PostInstallInspect.xml
[19.3.2014 9:21:23] Information : Deserialising the Report XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
[19.3.2014 9:21:23] Information : Loading the check XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
[19.3.2014 9:21:23] Information : Getting the falures while performing checks
[19.3.2014 9:21:23] Information : Getting the error results
[19.3.2014 9:21:23] Information : Getting the warning results
[19.3.2014 9:21:23] Information : Deserialising the Report XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\\PostInstallInspect.xml
[19.3.2014 9:21:23] Information : Loading the check XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\\PostInstallInspect.xml
[19.3.2014 9:21:23] Information : Getting the falures while performing checks
[19.3.2014 9:21:23] Information : Getting the error results
[19.3.2014 9:21:23] Information : Getting the warning results
[19.3.2014 9:21:23] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services.
[19.3.2014 9:21:23] Information : Querying WMI Namespace: \\MyDpmServer\root\Microsoft\SqlServer\ReportServer\RS_MSDPM2012\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='MSDPM2012'
[19.3.2014 9:21:23] Data : Path of configuration file for SQL Server 2008 Reporting Services = C:\Program Files\Microsoft SQL Server\MSRS11.MSDPM2012\Reporting Services\ReportServer\RSReportServer.config
[19.3.2014 9:21:24] Information : <<< Dialog >>> Inspect Page : Leaving
[19.3.2014 9:21:24] Information : <<< Dialog >>> User Information Page : Entering
[19.3.2014 9:21:36] Information : <<< Dialog >>> User Information Page : Leaving
[19.3.2014 9:21:36] Information : <<< Dialog >>> Install location Page : Entered
[19.3.2014 9:21:36] Information : Check if the media is removable
[19.3.2014 9:21:36] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
[19.3.2014 9:21:36] Data : Drive Name = C:\
[19.3.2014 9:21:36] Data : Drive Type = 3
[19.3.2014 9:21:36] Information : Check attributes of the directory
[19.3.2014 9:21:36] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
[19.3.2014 9:21:36] Data : File Attributes = Directory
[19.3.2014 9:21:36] Information : Query free disk space
[19.3.2014 9:21:36] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
[19.3.2014 9:21:36] Data : Free Space = 1096246
[19.3.2014 9:21:36] Information : Query free disk space
[19.3.2014 9:21:36] Data : Folder Path = C:\Windows\system32
[19.3.2014 9:21:36] Data : Free Space = 1096246
[19.3.2014 9:21:36] Information : Check if the media is removable
[19.3.2014 9:21:36] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
[19.3.2014 9:21:36] Data : Drive Name = C:\
[19.3.2014 9:21:36] Data : Drive Type = 3
[19.3.2014 9:21:36] Information : Check attributes of the directory
[19.3.2014 9:21:36] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
[19.3.2014 9:21:36] Data : File Attributes = Directory
[19.3.2014 9:21:36] Information : Query free disk space
[19.3.2014 9:21:36] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
[19.3.2014 9:21:36] Data : Free Space = 1096246
[19.3.2014 9:21:36] Information : Query free disk space
[19.3.2014 9:21:36] Data : Folder Path = C:\Windows\system32
[19.3.2014 9:21:36] Data : Free Space = 1096246
[19.3.2014 9:21:36] Information : Check if the media is removable
[19.3.2014 9:21:36] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[19.3.2014 9:21:36] Data : Drive Name = C:\
[19.3.2014 9:21:36] Data : Drive Type = 3
[19.3.2014 9:21:36] Information : Check attributes of the directory
[19.3.2014 9:21:36] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[19.3.2014 9:21:36] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[19.3.2014 9:21:36] Information : Query free disk space
[19.3.2014 9:21:36] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[19.3.2014 9:21:36] Data : Free Space = 1096246
[19.3.2014 9:21:36] Information : Caught Exception DatabaseInfoRegKey RegKey shouldn't be null, set DPM DB name to default value
[19.3.2014 9:21:38] Information : Check if the media is removable
[19.3.2014 9:21:38] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
[19.3.2014 9:21:38] Data : Drive Name = C:\
[19.3.2014 9:21:38] Data : Drive Type = 3
[19.3.2014 9:21:38] Information : Check attributes of the directory
[19.3.2014 9:21:38] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
[19.3.2014 9:21:38] Data : File Attributes = Directory
[19.3.2014 9:21:38] Information : Check if the media is removable
[19.3.2014 9:21:38] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[19.3.2014 9:21:38] Data : Drive Name = C:\
[19.3.2014 9:21:38] Data : Drive Type = 3
[19.3.2014 9:21:38] Information : Check attributes of the directory
[19.3.2014 9:21:38] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[19.3.2014 9:21:38] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.GetAttributes(String path)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
[19.3.2014 9:21:38] Information : Caught Exception DatabaseInfoRegKey RegKey shouldn't be null, set DPM DB name to default value
[19.3.2014 9:21:38] Information : Check the filesystem on which DPM and prerequisites are installed
[19.3.2014 9:21:38] Information : C:\Program Files\Microsoft System Center 2012 R2\DPM
[19.3.2014 9:21:38] Information : C:\Windows\system32
[19.3.2014 9:21:38] Information : Query free disk space
[19.3.2014 9:21:38] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
[19.3.2014 9:21:38] Data : Free Space = 1096246
[19.3.2014 9:21:38] Information : Query free disk space
[19.3.2014 9:21:38] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[19.3.2014 9:21:38] Data : Free Space = 1096246
[19.3.2014 9:21:38] Information : Query free disk space
[19.3.2014 9:21:38] Data : Folder Path = C:\Windows\system32
[19.3.2014 9:21:38] Data : Free Space = 1096246
[19.3.2014 9:21:38] Data : Location of program files = C:\Program Files\Microsoft System Center 2012 R2\DPM
[19.3.2014 9:21:38] Data : Location of database files = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[19.3.2014 9:21:38] Information : <<< Dialog >>> Install location Page : Leaving
[19.3.2014 9:21:41] Information : <<< Dialog >>> Commit Page : Entering
[19.3.2014 9:21:41] Data : An instance of SQL Server to be used to create database = MSDPM2012
[19.3.2014 9:21:41] Data : Target directory for installation = C:\Program Files\Microsoft System Center 2012 R2\DPM
[19.3.2014 9:21:41] Data : Physical location of database = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[19.3.2014 9:21:42] Information : <<< Dialog >>> Commit Page : Leaving
[19.3.2014 9:21:42] Information : **************************************************************************************
[19.3.2014 9:21:42] Information : Log setup inputs =>
[19.3.2014 9:21:42] Data : ProgramFiles = C:\Program Files\Microsoft System Center 2012 R2\DPM
[19.3.2014 9:21:42] Data : UIProgramFiles = C:\Program Files\Microsoft Data Protection Manager
[19.3.2014 9:21:42] Data : DatabaseFiles = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
[19.3.2014 9:21:42] Data : IntegratedInstallSource = E:\SCDPM\
[19.3.2014 9:21:42] Data : SqmOptIn = 2
[19.3.2014 9:21:42] Information : **************************************************************************************
[19.3.2014 9:21:42] Information : <<< Dialog >>> Progress Page : Entering
[19.3.2014 9:21:42] Information : Function >> MsiSetInternalUI
[19.3.2014 9:21:42] Information : MsiSetInternalUI returned INSTALLUILEVEL_DEFAULT
[19.3.2014 9:21:42] Information : Function >> MsiSetExternalUI
[19.3.2014 9:21:42] Data : Path of main msi = C:\Users\administrator.MyDomain\AppData\Local\Temp\2\DPM4657.tmp\DPM2012\msi\msdpm.msi
[19.3.2014 9:21:42] Data : Path of log file = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\DpmSetup.log
[19.3.2014 9:21:42] Information : Getting the string form of report object
[19.3.2014 9:21:42] Information : Writing the xml string into the file : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\\PostInstallInspect.xml
[19.3.2014 9:21:42] Information : Getting the reporting secure connection level for MyDpmServer/MSDPM2012
[19.3.2014 9:21:42] Information : Querying WMI Namespace: \\MyDpmServer\root\Microsoft\SqlServer\ReportServer\RS_MSDPM2012\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='MSDPM2012'
[19.3.2014 9:21:42] *** Error : ReportingConfiguration.RemoveReportingConfigurations COnfiguration file path: C:\Program Files\Microsoft SQL Server\MSRS11.MSDPM2012\Reporting Services\ReportServer\RSReportServer.config
[19.3.2014 9:21:42] Information : Present Secure Connection Level:0
[19.3.2014 9:21:42] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services.
[19.3.2014 9:21:42] Information : Querying WMI Namespace: \\MyDpmServer\root\Microsoft\SqlServer\ReportServer\RS_MSDPM2012\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='MSDPM2012'
[19.3.2014 9:21:42] Data : Path of configuration file for SQL Server 2008 Reporting Services = C:\Program Files\Microsoft SQL Server\MSRS11.MSDPM2012\Reporting Services\ReportServer\RSReportServer.config
[19.3.2014 9:21:42] Information : **************************************************************************************
[19.3.2014 9:21:42] Information : Deploy reports
[19.3.2014 9:21:42] Data : Path of configuration file of SQL Server Reporting Services = \\MyDpmServer\C$\Program Files\Microsoft SQL Server\MSRS11.MSDPM2012\Reporting Services\ReportServer\RSReportServer.config
[19.3.2014 9:21:42] Information : Starting Service:ReportServer$MSDPM2012 on machine:MyDpmServer flag restart:True
[19.3.2014 9:21:47] Information : Starting Service:ReportServer$MSDPM2012 on machine:MyDpmServer flag restart:True
[19.3.2014 9:21:52] Data : Source folder for reports (.rdl files) = C:\Users\administrator.MyDomain\AppData\Local\Temp\2\DPM4657.tmp\DPM2012\setup\DpmReports
[19.3.2014 9:21:52] Data : Path of dll to invoke = C:\Users\administrator.MyDomain\AppData\Local\Temp\2\DPM4657.tmp\DPM2012\setup\DlsUILibrary.dll
[19.3.2014 9:21:52] Information : Set report rendering extensions in Reporting Services
[19.3.2014 9:21:52] Information : Set tracing level in Reporting Services
[19.3.2014 9:21:52] Information : Deploy reports
[19.3.2014 9:21:52] Data : Source folder for reports (.rdl files) = C:\Users\administrator.MyDomain\AppData\Local\Temp\2\DPM4657.tmp\DPM2012\setup\DpmReports
[19.3.2014 9:21:52] Data : Path of dll to invoke = C:\Users\administrator.MyDomain\AppData\Local\Temp\2\DPM4657.tmp\DPM2012\setup\DlsUILibrary.dll
[19.3.2014 9:21:57] * Exception : => System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException:
No connection could be made because the target machine actively refused it 192.168.11.35:443
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Reporting.ReportingService2005.ListSecureMethods()
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.ConnectToReportServerUrl(String RSUrl, Boolean throwExcecption)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.ConstructReportServerUrl(String sqlServerName, String sqlInstanceName)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.GetReportServerUrl(String sqlServerName, String sqlInstanceName)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateReportProxyObject(String sqlServerName, String sqlInstanceName)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateReportRootFolder(String serverName, String instanceName, Boolean recreate)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.InstallReports(Boolean calledFromSetup, String sourceFolderPath, String sqlServerName, String sqlInstanceName, String dbConnectionString)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.DeployReports(Boolean isRemoteReporting, String sqlMachineName, String sqlInstanceName, String rsMachineName, String rsInstanceName, String installerPath)
[19.3.2014 9:21:57] * Exception : => Report configuration failed.Verify that SQL Server Reporting Services is installed properly and that it is running.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException: exception --->
Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ReportDeploymentException: exception ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.WebException: Unable to connect
to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.11.35:443
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Reporting.ReportingService2005.ListSecureMethods()
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.ConnectToReportServerUrl(String RSUrl, Boolean throwExcecption)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.ConstructReportServerUrl(String sqlServerName, String sqlInstanceName)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.GetReportServerUrl(String sqlServerName, String sqlInstanceName)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateReportProxyObject(String sqlServerName, String sqlInstanceName)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateReportRootFolder(String serverName, String instanceName, Boolean recreate)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.InstallReports(Boolean calledFromSetup, String sourceFolderPath, String sqlServerName, String sqlInstanceName, String dbConnectionString)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.DeployReports(Boolean isRemoteReporting, String sqlMachineName, String sqlInstanceName, String rsMachineName, String rsInstanceName, String installerPath)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.DeployReports(Boolean isRemoteReporting, String sqlMachineName, String sqlInstanceName, String rsMachineName, String rsInstanceName, String installerPath)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.DeployReports(String reportserverConfigFilePath, Boolean isOemSetup, String sqlMachineName, String sqlInstanceName, Boolean isRemoteReporting, String reportingServerMachineName, String
reportingInstanceName)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.DeployReports(String reportserverConfigFilePath, Boolean isOemSetup, String sqlMachineName, String sqlInstanceName, Boolean isRemoteReporting, String reportingServerMachineName, String
reportingInstanceName)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.DpmInstaller.DeployReports(Boolean isRemoteReporting, Boolean isUpgrade)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ProgressPage.InstallerThreadEntry()
*** Mojito error was: ReportDeploymentFailed; 0; None
[19.3.2014 9:21:57] *** Error : Report configuration failed.
Verify that SQL Server Reporting Services is installed properly and that it is running.
ID: 812
[19.3.2014 9:21:57] Information : Data Protection Manager installation has failed. All the items that were copied during the installation process have been removed.
For details, click the Error tab.
[19.3.2014 9:21:58] Information : <<< Dialog >>> Progress Page : Leaving
[19.3.2014 9:21:58] *** Error : Application_ThreadException
[19.3.2014 9:22:17] *** Error : Application_ThreadException
[19.3.2014 9:22:18] *** Error : Application_ThreadException
[19.3.2014 9:22:18] *** Error : Application_ThreadException
[19.3.2014 9:22:19] *** Error : CurrentDomain_UnhandledException -
Asha 501 - Problems Compiled HERE
Hello members,
I felt there should be a compilation of all the defects/problems/complains towards Asha 501 phone ONLY in one thread. Every one also adds their own observations and experience with the Asha 501 than it will be easy for the others to read and hopefully for the Nokia team to look into the complains as well.
Here is the list:
PDF Reader, MS Office Documents viewer/editor (the inbuilt app is not at all good with .xls & .ppt files to view)
No Cut/Copy/Paste feature outside browsers for the documents viewed within them and from the app "Notes"
No feature to minimise opened apps and switch between them.
Recent call logs don't display date for last 7 days other than days following past week . There is only "time" displayed for the calls last 12 hour and "name of the day ( ex: Fri, Sat or Sun )" for the last 7 days.
No option to clear a single Fastlane entry
The Music Library shows the name of the song(s) NOT as per the title of mp3's saved in the "Music Folder" of the Memory Card/Phone Memory
The Music Library search function hides a significant portion of "search results" due to the pop up of the keyboard. As a result, it's difficult ( almost impossible ) to view more than ( or nearest ) 2 results.
Can't delete pre-installed apps
Facebook and Twitter app seems a lot buggy with their notifications are almost non-existent and stopped working ( in many cases )
Support for "Alarms" to work when the phone is switched off. Low model non-touchscreen nokia handsets do have this feature and it ould be great addition to touchscreen models as well.
"Alarms" sound is too low for custom music selected as "alarm tone"
Option for "Counters" to "Clear counters" daywise and not clear entire history to date
Screen turns off completely while you are attending a call and requires to push "home" key. A better and easy approach to this is requested, mostly, keeping the screen ON always while the Call is active.
Java apps supported but no access to stuff online that requires java? Browsers lack support for Java plug-in
Support for Whatsapp
Support for custom "Wallpaper for home screen" to choose from Memory card/Phone Memory
Support for Flash in Browsers to view /flv videos and play saved content
Support for higher file sizes to upload in Emails as attachments
Support for compression tools like .zip or .rar, etc.
Addition of "Battery icon" and display "date" on the pull down notification centre.
Please provide your list in a concise manner so as to track down as many user responses as possible.Hello,
Your suggestions are good food for thought, but I think some of them are not realistic, at least for the current generation of Asha devices...
Others would be nice improvements, though.
1 - This is due to technical limitations of the platform. See my post here: https://discussions.nokia.com/t5/Asha-and-other-Nokia-Series-30/pdf-reader-for-asha-311/m-p/2128113#...
3 - this is an OS limitation, not likely to change
6 - agreed, they should fix it
7 - agreed, they should fix it
8 - this is the same for example non-rooted android devices, not likely to change
9 - agreed, they should fix it
10 - agreed, it would be nice to have. As a workaround, if you put your phone to flight mode, the alarm will still activate but the phone will use considerably less power.
11 - agreed, they should fix it
12 - this would be nice to have
13 - powering off the screen during conversation is a power saving feature, your suggestion has questionable benefit. Besides, most people are not capable of sensing light with their ears Automatic screen poweron would require a proximity detector (plus hardware omitted due to cost-saving).
14 - the two javas are different and not compatible. The phone has J2ME (Mobile java), the websites use desktop java (J2SE).
15 - it would be nice to have
17 - flash seems to be less and less supported, even deprecated on most mobile platforms. I don't think it'll come.
18 - this is likely due to a technical limitation (either device heap size or bandwidth consideration on the supporting background services - since Nokia email is proxied)
19 - this is possible to implement by a third party but not part of other mobile OSes, either
20 - it would be nice to have
Nokia Lumia 520 3046.0000.1329.2001 RM-914
Nokia Asha 302 V15.09 22-05-13 RM-813 -
Purchasing cube designing, update rule mapping for 0calday
Hi All,
Iam designing cube for Purchasing module in BW. Iam having doubt in mapping for 0calday in update rules, is it with document date or scheduline date. I have searched in SAP cube 0PUR_C01, it is mapped with 0SCHED_DATE( schedule line date). How the difference comes when we choose document date and schedule line date.
FYI, we are using only schedule line data source, which is giving relevant information.
Thanks,
RamHi Ram,
Please note:
0SCHED_DATE: The schedule line date is the day on which the scheduled quantity of the material is to be delivered.
0DOC_DATE: The date on which document has been craeted.
Use the first one for purchasing.
Thanks...
Shambhu -
Hi Experts
in the schedule lines generally we find that there may be two schedule lines items that come for the same date one with rounded qunatity and order quantity and the second schedule line item comes with the confirmed quantity even if the same date is there both the line items,
please let me know would like to know exactly on what condition/ situation is the schedule line date
split up into 2 lines ? What are the possible cases for these schedule lines to split up ?
ThanksHi,
Pl. check requested delivery date in sales tab in sales order, as scheduline date pick up by default as requested delivery date . Also check First Date column at item level. There also you will get requested delivery date.
Hope this will help you
Thanks
Trupti
Maybe you are looking for
-
HT204088 How to know the rest of money in a credit card and the total of purchase amount?
How to know the rest of money in a credit card and the total of purchase amount?
-
Manual Price Ajusted for Quantity Variance
During sales order entry a customer service rep enters a manual price. This price applies to the entire order independent of quantity delivered. During Billing creation configuration is setup to copy manual pricing elements unchanged but the manual
-
Save Thumbnail as PSD? - PSE 7.0
My backup has become corrupted for about a month's worth of family photos. I would like some images to put in my scrapbook, so my question is... Is there some way to save the thumbnails in Organizer to a PSD? I realize the resolution will be bad but
-
After failing to open it I have uninstalled itunes & tried a new download but it asks to 'verify sufficient privileges to start system service' for mobile device and then fails, what is happening?
-
Can I extract images from PDFs using Batch Processing as I have many separate PDFs all with images t
I have about 500 separate PDF pages all that need their images extracting, surely there must be a way to run a batch command on it? PLease help! it will take me for ever!