Scheduling Aggrement Error
Hi All,
I am using ME2L report to capture the Open PO's.
I am using a variant.
I found some wrong entries in that report.
I made a scheduling aggrement with one line item.
In line item the total quantity is 575.
I made that in to four schedule lines.
In first schedule line the Scheduled qty is 200 and GR done for 200 qty.
In Second schedule line the scheduled qty is 125 and GR done for 125.
In Third schedule line the scheduled qty is 125 and GR done for 125.
In Fourth schedule line the scheduled qty is 125 and GR not done.
After executing the report i am getting the following entries,
For first schedule line its showing
Scheduled qty 200 GR qty 200
To Be Delivered 125
For second schedule line its showing
Scheduled qty 125 GR qty 125
To Be Delivered 125
For third schedule line its showing
Scheduled qty 125 GR qty 125
To Be Delivered 125
For fourth schedule line its showing
Scheduled qty 125 GR qty 0
To Be Delivered 125
So for last schedule line its showing the corret "To be Delivered qty but not for the other schedule lines".
Help me in this regard.
Hi,
Thanks for the reply.
When i execute the report with variants i am getting a different layout.
After i click views and delivery schedule in Menu.
I will get a layout like this,
Vendor Purch.Doc. Schd. Type PGr Material Short text Matl Group
Plnt SLoc Doc. date Quantity BUn Net price Crcy Per
Sched.qty. Deliv.date GR qty To be del.
800477 300362 0001 LP 002 33111 L-ISOLEUCINE ORAL 20 KG B72 PB30 WHSE 05/27/2008 575.000 DRM 27.97 USD 1 200.000 06/27/2008 200.000 125.000
800477 300362 0002 LP 002 33111 L-ISOLEUCINE ORAL 20 KG B72 PB30 WHSE 08/06/2008 575.000 DRM 27.97 USD 1 125.000 09/22/2008 125.000 125.000
800477 300362 0003 LP 002 33111 L-ISOLEUCINE ORAL 20 KG B72 PB30 WHSE 08/06/2008 575.000 DRM 27.97 USD 1 125.000 10/20/2008 125.000 125.000
800477 300362 0004 LP 002 33111 L-ISOLEUCINE ORAL 20 KG B72 PB30 WHSE 08/06/2008 575.000 DRM 27.97 USD 1 125.000 11/17/2008 0.000 125.000
I am using BEST_ALV as scope of list.
How to proceed
Regards
KK
Edited by: Kishore Kumar Galla on Jan 13, 2009 7:03 PM
Similar Messages
-
Error while doing GR for scheduling aggrement
Dear Experts,
We are facing error while doing GR for scheduling aggrement.
we have done the following steps.
1) Scheduling aggreement in ME31L
2) Released in ME35L
3) Mainatined Sch.Agmt Schdule in ME38 for todays and date 200 qty and other line is 800 qty.
When we are trying to do GR in MIGO system is giving the following message.
Document 5500000152 does not contain any selectable items
can I know what I have missed in the above steps.
Please guide me to resolve this.
Regards,
PrasadHi,
Please check Please check if Gr is already done against this document. Also please check whether you have attached SA in the source list with line items.
T-code:ME01
Enter Mat.code & Plant.
In the next screen pl.do the following:
Valid from - commencement date of the SA
Valid to - End date of the SA
Vendor - Vendor on whom the SA is released
POrg - Your purchase organisation
PPL - Leave it blank(This is only for interplant)
OUn - Ordering unit
Agreement - SA number
Item - 1
I hope this will resolve your issue. Thanking you -
System not checking the source list while creating Scheduling Aggrement
Dear Gurus,
when i create a PO for a material(XYZ) which is not having a vendor(100) in the source list the system throws me a error message sayin that the vendor(100) is not maintained i the Source list.
but the same is not happenin when i create a Scheduling aggrement.
Can you please advice me which setting i am missin here?
Thanks...
KumarHi,
Are you trying to create the Scheduimg agreement for the same plant as that of the Purchase order?
As "Source list mandatoty" check box is in the plant specific view of Material master,it is possible that it is not ticked in case both the plants are different.
Please check & advise.
Thanks & regards,
Kaveri -
Schedule line error ,urgent,urgent
dea sap expert:
I have schedule line error , please help
I have part 9173191-04.
There is schedule line as below
10th Feb 72
10th Feb 72
17th Feb 172
On 23th Feb , the stock is zero.
Due to our factory want to GR early than 17th Feb.
Material planner change lastest schedule date from 17th to 10th .
After she change , schedule line as below
10th Feb 72
10th Feb 72
10th Feb 172
17th Feb 12
On 23th Feb , the stock is 12 PC.
Could you help to explain , why it generate another 12 PC .
And make there are 12PC we will never be used it.
Please help me on it .
Thanks so much.
Below is the material master information .
MRP Type P1
Reorder Point 0 Planning time fence 10
Planning cycle Z05 (Friday )
Lot size SB
Rounding value 72
Procurement type F Batch entry
Special procurement Prod. stor. location AS03
Quota arr. usage 3 Default supply area
Backflush 1 Storage loc. for EP XT06
JIT delivery sched. Stock det. grp REM
In-house production 0 days Planned Deliv. Time 0 days
GR Processing Time 0 days Planning calendar Z05(Friday )
SchedMargin key LOC
Safety Stock 0 Service level (%) 97.0
Min safety stock 0 Coverage profile
Safety time ind. 2 Safety time/act.cov. 7 days
STime period profileHi,
>Wish to know when & why does the schedule line Exist tab in sales order trigger.
Schedule line is a place where you can define different delivery dates for a single line item.
Let's say, you have one line item for quantity 1000. Now if your production department and planning department saying they can deliver it in a weekly basis.(Say 250 for each week)
In that case you have 2 options.
One is to create 4 separate line items instead of original line item with different delivery dates and relevant quantities.
You can create delivery from VL01N or VL10C here for relevant line item.
Else
have 4 different schedule lines with delivery dates and relevant quantities
You can do delivery from VL10E for this case for relevant schedule line.
Same is happening when ATP is triggered, where system suggest different delivery dates as different schedule lines.
So it's based on ATP or it can be your decision as well.
>when I try to do the delivery I get an error u201CNo schedule lines due for delivery up to the selected date u201D.
This can happen for many reasons.
1 - Because the "Selection Date" you have given in the VL01N screen is not equal or greater than the "delivery date" you have maintained in the schedule lines.
Always make sure below rule.
"Selection Date" of the VL01N > "delivery date" you have maintained in the schedule lines
Therefore change the date in the "Selection Date" of the VL01N to "delivery date" you have maintained in the schedule line or forward date and try.
2 - You don't have confirmed stock.
Check your schedule line tab for "Confirmed quantity" column, if you don't have a value there, this error comes. This happens when you haven't done ATP.
Best regards,
Anupa -
Delivery schedule-Scheduling aggrement
Dear All,
Based on what points or what all pre-requisties does the delivery schedule lines in delivery schedule gets generated?
Regards,
Indranilare u talking about delivery scheb\dule generasted auto with MRP
u have to creat Scheduling aggrement
create Source list in that put SA number and 2 in mrp field click on fix vendor
hope this helps -
BAPI for customer scheduling aggrement (VA31)
Hi,
I want to create customer scheduling aggrement using BAPI, but i hav't find any BAPI for this.
So please tell me is their any BAPI available to create scheduling aggrement.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Thanks,
Rahul
Edited by: Alvaro Tejada Galindo on Aug 22, 2008 4:21 PMDear Jelena,
'BAPI_SAG_CREATE' is used for creating Purchase Scheduling Agreement Tcode u2013 ME31L but my requirement is for creating customer scheduling agrrement Tcode - VA31.
Pl. confirm is it possible to use the above BAPI for VA31 or not.
Thanks,
Rahul -
Not able to put delivery completed indicator in scheduleing aggrement
Hi ,
We are unable to put delivery completed indicator in scheduling aggrement . We are geting following message and its common scheduleing aggremnt and material don't have any stock and sub contracting order . Still what the point s we need to check in this case .
"Delivery completed" indicator cannot be set for item 00010
Message no. 06 848
Diagnosis
You have set the "delivery completed" indicator for a stock transfer item.
System Response
You can only set the "delivery completed" indicator in stock transfer items if
the sum of the goods issue quantities in the supplying plant equals the sum of the goods receipt quantities in the receiving plant
the sum of the delivery note quantities is equal to the sum of the goods receipt quantities.
Procedure
Cancel the "delivery completed" indicator."
RBIs there an old/any STO pending.(Plant to plant delivery) of that particular item....
like Completion of stock transfers with GI qty > GR qty scenario....
plz check and revert back,if there is one plz close it and then put indicaor in SCHLD AGREE... -
Fixed freight value in scheduling aggrement schedule lines.
hello all,
i was trying to use Inland Freight - Val created for PO in SA .
it was not reflecting DCGR in scheduling aggrements so I unchecked the Group conditions and system was able to generate DCGR for SA against Value condition.
now i want my scheduling aggrement to calculate fixed delivery cost for each line items no matter how much quantity i am using for my GR in schedule line items but i am not able to do so..
please help me with this.
_nehaSAP always proportions the "fixed" price according to the ratio between PO quantity and received quantity.
In OSS note 304178 SAP says that there is no solution -
Stock Transport Scheduling Agreement - error message: 'Stock in transit exceeded'
Hi, I do have a question about transport scheduling agreements.
I have created a stock transport scheduling agreement via ME37, doc. type LU for a stock material from issuing plant TT01 to receiving plant TH01. The material is maintained in both plants.
After that,I maintain the delivery schedule via ME38 for a quantity for today. The quantity is available at issuing plant TT01, checked via MMBE.
Then, I try to post the goods via MIGO. When I try to post the document, I get the following error message: "PL Stock in transit exceeded by 1,000 T% : 794 TH01 S1". Why do I get that? My target is to decreate the stock quantity in TT01 and to increase the stock quantity in TH01.
Thanks, PeterHi,
This happens when you are issuing more on the schudle qty, Check you have anything on the transit receive it the try agin to process the issue.
Hope it helps.
Suresh -
We have a multithreaded CVI app (~20 threads) running on a PXIe-8135 (4 CPUs). The application never gets done starting all the threads before blue-screening with the following error:
Scheduler Asser: __1276
Scheduler Assertion Error: 80000004
Interrupt Disabled. Scheduler Enabled. ....
More details:
System
Chassis 1 PXIe-1085:
PXIe-8135 Controller
PXI-6704 (7 of them), initialize properly, thread runs successfully until blue screen
PXI-8431/8 (8 of these, total of 64 RS422 channels, about 40 being used currently for test), it is during the starting of these threads (one for each board) that it blue screens
PXIe-8374 (for using Chassis 2 as an extension of Chassis 1)
Chassis 2 PXIe-1075:
PXI-8370 (connected to PXIe-8374)
PXI-6528 (1) threads run fine
PXI-6529 (4) threads run fine
NI-8234 (4) not used currently
The scheduler error happens at different times, but always during the starting of the RS422 threads. Can anybody give a hint as to why the Scheduler Assertion Error occurs, and particularly this specific error?Hi,
I have a couple of questions for you.
1) Has this application ever worked?
2) Can you attempt to replicate this issue with less RS422 channels? Basically, is there a maximum number of RS422 channels where the error is received, or if you had only 1 channel being used, would the error still happen?
3) Do you have another PXIe controller that you can try?
4) Did anything change in your system that would have caused the error?
Kevin S
Applications Engineer
National Instruments -
Service Contracts Billing Schedule Creation Error
Hi,
I have a requirement of creating service contracts from back-end for which I am using the oks_contracts_pub.create_contract_header, create_service_line, and create_bill_schedule. I am creating my contracts with active status and renewal type of EVN (Header level), FUL(Line Level). My contract is of type subscription. The contract header and line are creating fine but the Bill schedule API is throwing an UNEXPECTED ERROR. The billing schedules need to be created based on accounting rule which can be quarterly or monthly. I have included the bill schedule code (hard coded values) for review. Any help is greatly appreciated.
Also the version I am working on is R12
________________________________________________CODE___________________________________________________________________
CREATE OR REPLACE PROCEDURE BILLING_SCHEDULE AS
l_strm_level_tbl OKS_BILL_SCH.STREAMLVL_TBL;
v_bill_qtrs NUMBER := 0;
v_bill_mths NUMBER := 0;
v_bill_days NUMBER := 0;
v_net_amount NUMBER := 468;
v_acct_rule_name VARCHAR2(50) := 'QUARTERLY';
v_amt_per_day NUMBER;
x_error_locator VARCHAR2(2000);
v_start_date DATE := '04-MAY-2010';
v_end_date DATE := '25-MAY-2010';
x_return_status VARCHAr2(3);
x_msg_count NUMBER;
x_msg_data VARCHAR2(2000);
v_billing_sequence NUMBER;
x_chr_id NUMBER := 17000;
x_line_id NUMBER := 223248604345353294444923586786456728480;
g_day_uom VARCHAR2(10) := 'DAY';
g_month_uom VARCHAR2(10) := 'MTH';
g_quarter_uom VARCHAR2(10) := 'QTR';
v_amt NUMBER;
v_invoicing_rule_id NUMBER := -2;
BEGIN
--Create Billing Schedule based on accounting rule
okc_context.set_okc_org_context;
MO_GLOBAL.INIT('OKS');
MO_GLOBAL.SET_POLICY_CONTEXT('S', 83);
v_bill_qtrs := 0;
v_bill_days := 0;
v_bill_mths := 0;
SELECT NVL(v_net_amount, 0)/(v_end_date - v_start_date)
INTO v_amt_per_day
FROM dual;
dbms_output.put_line('Calculated amt per day ' || v_amt_per_day);
IF v_acct_rule_name LIKE '%QUARTERLY%' THEN
--Quarterly billing schedule
SELECT FLOOR(MONTHS_BETWEEN( v_end_date,
v_start_date)/3),
v_end_date - ADD_MONTHS(v_start_date, (FLOOR(MONTHS_BETWEEN(v_end_date, v_start_date)/3)*3))
INTO v_bill_qtrs,
v_bill_days
FROM dual;
dbms_output.put_line('Calculated the qtrs and days');
IF v_bill_qtrs > 0 THEN
SELECT (ADD_MONTHS(v_start_date, (FLOOR(MONTHS_BETWEEN(v_end_date, v_start_date)/3)*3)) - v_start_date)*v_amt_per_day
INTO v_amt
FROM dual;
dbms_output.put_line('Calculated qtr amt');
SELECT NVL(MAX(sequence_no), 0) + 1
INTO v_billing_sequence
FROM oks_stream_levels_b
WHERE dnz_chr_id = x_chr_id
AND cle_id = x_line_id;
--Populating the stream line variables
l_strm_level_tbl(v_billing_sequence).sequence_no := v_billing_sequence;
l_strm_level_tbl(v_billing_sequence).dnz_chr_id := x_chr_id;
-- l_strm_level_tbl(v_billing_sequence).id := x_line_id;
l_strm_level_tbl(v_billing_sequence).cle_id := x_line_id;
l_strm_level_tbl(v_billing_sequence).uom_code := g_quarter_uom;
l_strm_level_tbl(v_billing_sequence).uom_per_period := 1;
l_strm_level_tbl(v_billing_sequence).level_periods := v_bill_qtrs;
l_strm_level_tbl(v_billing_sequence).start_date := v_start_date;
l_strm_level_tbl(v_billing_sequence).end_date := v_end_date;
l_strm_level_tbl(v_billing_sequence).invoice_offset_days := NULL;
l_strm_level_tbl(v_billing_sequence).amount := v_amt/v_bill_qtrs;
l_strm_level_tbl(v_billing_sequence).level_amount := v_amt/v_bill_qtrs;
l_strm_level_tbl(v_billing_sequence).lines_detailed_yn := 'Y';
l_strm_level_tbl(v_billing_sequence).due_arr_yn := 'Y';
dbms_output.put_line('Before calling the Bill Sch API for QTR');
OKS_CONTRACTS_PUB.CREATE_BILL_SCHEDULE ( p_billing_sch=>'E',
p_strm_level_tbl=>l_strm_level_tbl,
p_invoice_rule_id=>v_invoicing_rule_id,
x_return_status=>x_return_status);
dbms_output.put_line('After calling the Bill Sch API for QTR');
IF x_return_status <> 'S' THEN
x_msg_count := 1;
dbms_output.put_line('Quarterly schedule creation error ' || x_msg_data);
---DBMS_TRANSACTION.ROLLBACK_SAVEPOINT('OKS_A');
-- RETURN;
END IF;
END IF;
IF v_bill_days > 0 THEN
SELECT NVL(MAX(sequence_no), 0) + 1
INTO v_billing_sequence
FROM oks_stream_levels_b
WHERE dnz_chr_id = x_chr_id
AND cle_id = x_line_id;
dbms_output.put_line('sequence '||v_billing_sequence);
--Populating the stream line variables
l_strm_level_tbl(v_billing_sequence).sequence_no := v_billing_sequence;
l_strm_level_tbl(v_billing_sequence).dnz_chr_id := x_chr_id;
--l_strm_level_tbl(v_billing_sequence).id := x_line_id;
l_strm_level_tbl(v_billing_sequence).cle_id := x_line_id;
l_strm_level_tbl(v_billing_sequence).uom_code := g_day_uom;
l_strm_level_tbl(v_billing_sequence).uom_per_period := v_bill_days;
l_strm_level_tbl(v_billing_sequence).level_periods := 1;
l_strm_level_tbl(v_billing_sequence).start_date := v_start_date;
l_strm_level_tbl(v_billing_sequence).end_date := v_end_date;
l_strm_level_tbl(v_billing_sequence).invoice_offset_days := NULL;
l_strm_level_tbl(v_billing_sequence).amount := v_net_amount;--v_amt_per_day*v_bill_days;
l_strm_level_tbl(v_billing_sequence).level_amount := v_net_amount;--v_amt_per_day*v_bill_days;
l_strm_level_tbl(v_billing_sequence).lines_detailed_yn := 'Y';
l_strm_level_tbl(v_billing_sequence).due_arr_yn := 'Y';
dbms_output.put_line('Before calling the Bill Sch API for QTR days');
OKS_CONTRACTS_PUB.CREATE_BILL_SCHEDULE ( p_billing_sch=>'E',
p_strm_level_tbl=>l_strm_level_tbl,
p_invoice_rule_id=>v_invoicing_rule_id,
x_return_status=>x_return_status);
dbms_output.put_line('After calling the Bill Sch API for QTR days ' || v_bill_days || ' ' || x_return_status);
IF x_return_status <> 'S' THEN
x_msg_count := 1;
dbms_output.put_line('Day schedule, for quarterly accounting rule, creation error ' || x_msg_data);
--DBMS_TRANSACTION.ROLLBACK_SAVEPOINT('OKS_A');
--RETURN;
END IF;
END IF;
ELSE
--Monthly billing schedule
SELECT FLOOR(MONTHS_BETWEEN( v_end_date,
v_start_date)),
v_end_date - ADD_MONTHS(v_start_date, FLOOR(MONTHS_BETWEEN(v_end_date, v_start_date)))
INTO v_bill_mths,
v_bill_days
FROM dual;
dbms_output.put_line('Calculated the mths and days');
IF v_bill_mths > 0 THEN
SELECT (ADD_MONTHS(v_start_date,FLOOR(MONTHS_BETWEEN(v_end_date, v_start_date))) - v_start_date)*v_amt_per_day
INTO v_amt
FROM dual;
dbms_output.put_line('Calculated the mths amt');
SELECT NVL(MAX(sequence_no), 0) + 1
INTO v_billing_sequence
FROM oks_stream_levels_b
WHERE dnz_chr_id = x_chr_id
AND cle_id = x_line_id;
--Populating the stream line variables
l_strm_level_tbl(v_billing_sequence).sequence_no := v_billing_sequence;
l_strm_level_tbl(v_billing_sequence).dnz_chr_id := x_chr_id;
--l_strm_level_tbl(v_billing_sequence).id := x_line_id;
l_strm_level_tbl(v_billing_sequence).cle_id := x_line_id;
l_strm_level_tbl(v_billing_sequence).uom_code := g_month_uom;
l_strm_level_tbl(v_billing_sequence).uom_per_period := 1;
l_strm_level_tbl(v_billing_sequence).level_periods := v_bill_mths;
l_strm_level_tbl(v_billing_sequence).start_date := v_start_date;
l_strm_level_tbl(v_billing_sequence).end_date := v_end_date;
l_strm_level_tbl(v_billing_sequence).invoice_offset_days := NULL;
l_strm_level_tbl(v_billing_sequence).amount := v_amt/v_bill_mths;
l_strm_level_tbl(v_billing_sequence).level_amount := v_amt/v_bill_mths;
l_strm_level_tbl(v_billing_sequence).lines_detailed_yn := 'Y';
l_strm_level_tbl(v_billing_sequence).due_arr_yn := 'Y';
dbms_output.put_line('Before calling the Bill Sch API for MTHS');
OKS_CONTRACTS_PUB.CREATE_BILL_SCHEDULE ( p_billing_sch=>'E',
p_strm_level_tbl=>l_strm_level_tbl,
p_invoice_rule_id=>v_invoicing_rule_id,
x_return_status=>x_return_status);
dbms_output.put_line('After calling the Bill Sch API for MTHS');
IF x_return_status <> 'S' THEN
x_msg_count := 1;
dbms_output.put_line('Monthly schedule creation error ' || x_msg_data);
--DBMS_TRANSACTION.ROLLBACK_SAVEPOINT('OKS_A');
--RETURN;
END IF;
END IF;
IF v_bill_days > 0 THEN
SELECT NVL(MAX(sequence_no), 0) + 1
INTO v_billing_sequence
FROM oks_stream_levels_b
WHERE dnz_chr_id = x_chr_id
AND cle_id = x_line_id;
--Populating the stream line variables
l_strm_level_tbl(v_billing_sequence).sequence_no := v_billing_sequence;
l_strm_level_tbl(v_billing_sequence).dnz_chr_id := x_chr_id;
--l_strm_level_tbl(v_billing_sequence).id := x_line_id;
l_strm_level_tbl(v_billing_sequence).cle_id := x_line_id;
l_strm_level_tbl(v_billing_sequence).uom_code := g_day_uom;
l_strm_level_tbl(v_billing_sequence).uom_per_period := v_bill_days;
l_strm_level_tbl(v_billing_sequence).level_periods := 1;
l_strm_level_tbl(v_billing_sequence).start_date := v_start_date;
l_strm_level_tbl(v_billing_sequence).end_date := v_end_date;
l_strm_level_tbl(v_billing_sequence).invoice_offset_days := NULL;
l_strm_level_tbl(v_billing_sequence).amount := v_amt_per_day*v_bill_days;
l_strm_level_tbl(v_billing_sequence).level_amount := v_amt_per_day*v_bill_days;
l_strm_level_tbl(v_billing_sequence).lines_detailed_yn := 'Y';
l_strm_level_tbl(v_billing_sequence).due_arr_yn := 'Y';
dbms_output.put_line('Before calling the Bill Sch API for MTH days');
OKS_CONTRACTS_PUB.CREATE_BILL_SCHEDULE ( p_billing_sch=>'E',
p_strm_level_tbl=>l_strm_level_tbl,
p_invoice_rule_id=>v_invoicing_rule_id,
x_return_status=>x_return_status);
dbms_output.put_line('After calling the Bill Sch API for MTH days');
IF x_return_status <> 'S' THEN
x_msg_count := 1;
dbms_output.put_line('Day schedule, for monthly accounting rule, creation error ' || x_msg_data);
--DBMS_TRANSACTION.ROLLBACK_SAVEPOINT('OKS_A');
--RETURN;
END IF;
END IF;
END IF;
COMMIT;
EXCEPTION
when others then
dbms_output.put_line('Error ' || sqlerrm);
END;
Thanks,
Yash.Hi There,
I have a similar requirement to create rental service contracts and create billing schedules.
Can you please pass on your functional docs so that i can refer to them.
Thanks,
Raidu -
Hi Everybody,
I have an issue regarding Scheduling aggrement. I have maintainted the source list, purchase requisition, and maintained the scheduling agreement also. But in ME38 after selecting line item, when i click in delivery schedule tab, it is not displaying the PR number.
What are the changes to be done to display the PR number in ME38.
With Regards,
Bhaskar.hi bhakar
maintain agreement in me38
select the item go to delivery schedule
go to schedulinig agreement delivery schedule
select
create with ref to pur req u
pr number wiill be displayed -
Creation Output Message Type for Scheduling Aggrement
Hi,
Please share the detail configuration for the Output message type for scheduling aggrement, i need to use ALE IDoc so that i can send this SA to SRM system.
Regards,
PankajHi,
Output determination process for Scheduling aggrement.
SPRO-IMG-Material Management-Purchasing-Messages-Output Control-
1)First create condition table based which becomes condition record for accessing the data.
2)Create access sequence to access the data or search the based on the conditoin record in sequence of the condition table.
3)Define your message type like print,fax etc.
Maintain the conditon record for the MN07 for the output type which new one you created.
Regards
Ravi Shankar. -
Urgent help!! how to get schedule aggrement number from in bound delivery??
hello friends,
I have an urgent requirement for report. in which i have to diaply schedule aggrement number , in-bound delivery number , GR number and accounting document.
my input is inbound delivery date .
i found inbound delivery from likp-lips with type 'el' but not able to trace the schedule line number ,gr and ir , kidnly help me
thanks in advace
jaseright the query using table LIPS, EKKO, EKPO and EKBE
If you need than only use LIKP othre wise you will get the date from LIPS
make join from LIPS to EKKO than EKPO then EKBE
LIPS-VGBEL field can join to PO document of EKKO -
Delivery address in Scheduling aggrement
Hi All,
I have created scheduling aggrement with A1,A2,A3,A4 items and i defined the delivery address (Checked SC) for one A4 item and created source list also.
After MRP run the schedule lines are generated for A! A2,A3 but for A4 PR is creating in place of Schedule lines.
To create schedule line for A4 material what settings to be done and defined.
Without delivery address i am getting schedulelines for A4 material.
Thanks
ChindamHi,
If you want to use delivery address of SC on the scheduling line, you have to maintain the relevant MRP area for th part of item A4 in the material master data, then run MRP for the part with checked SC on the new MRP area! That will be fine!
Good luck
Tao
Maybe you are looking for
-
My iMac G5, OS X version 10.6.8 has a Photoshop CS2 and CS3 on it which have never started up, in the present configuration of the computer. (I had the capacity increased to 2 TB.) It has not been possible for me to uninstall them. The uninstaller
-
120 GB Needs To Be Restored Every Time Plugged In
Hi, this is my first post here as I've encountered a new issue I have been unable to find any answers for. I searched here and on Google repeatedly but a solution has yet to be found (for me). A little over a week ago I updated my iTunes to the newes
-
Using 3G cricket broadband to connect Wii to internet??
I really don't know what I'm doing, can anyone offer any advice? I'm trying to connect our Wii to the internet using my Cricket Broadband 3G USB modem, plugged into my MacBook. I've tried to create a network with internet on, and it won't work. Will
-
Screen blacks out at startup; what does it mean and can I fix it?
I've got a Macbook that has held up wonderfully over the past 6 months but just within the last week I've been having problems when trying to start my computer. I will turn it on like I normally do, the startup sound plays, the blue apple screen will
-
Photoshop will not open suddenly.
Photoshop windows error after launch "Photoshop has stopped working". Any thoughts??