Scheduling agmt v/s Source list validity dates

Hi,
When the MRP runs it is considering the Source list validity even if the Scheduling agreement is invalid. Can you please advice if this is standard SAP behavior and if there exist any configuration to control this ?

Hello
Your question is very generic, so can you please provide a more detailed description of your issue?
What do you mean by "scheduling agreement is invalid"?
It is not valid on the date, the target quantity has been exceeded or what?
In the meantime, I wrote the following document with the most frequent issues reated to MRP source determination that may be useful to you:
MRP: Vendor is not selected and general problems on source determination
BR
Caetano

Similar Messages

  • Source List validity dates for MRP only

    Hi.
    Is there a way to do the following:
    Set purchasing view "source list required" so that the material must be purchased from ANY of the sources on the source list...  AND...
    Setup the source list so that there are no overlaps, and MRP sources from consecutive contracts based on the source list validity dates.
    For example, 1/1/10 to 5/1/10 -> Contract A (mrp relevant);  5/2/10-10/1/10 -> Contract B (mrp relevant).  But on 5/3/10 I want to be able to manually change the requisition away from "B" and release against Contract A.  In other words, I want MRP to get the sourcing close to correct, but allow the user the ability to override the MRP sourcing, AND still ensure that the source the user picks is on the source list somewhere.
    When I try this now, the system generates "Source list not included in list despite source list requirement."  The source list checking seems to be done all the way at the validity period level.

    hi,
    I understood your concept. Please explain it  clearly so that why this message
    is appearing " Source list not included in list despite source list requirement"
    can be found out
    Regards
    G.Ganesh Kumar

  • Source List Validity Start Date

    I have noticed that, if the source list validity start date and contract validity start date are same then, the contract price is not considered while creating PO and receive error message as "Source not included in list despite source list requirement"
    If I change the validity start date of source list to one day before the validity start date of Contract then system is picking the contract price in PO and able to save PO successfully.
    Is there any way to create PO even if the validity start date of source list and contract are same?

    from OSS Note 44368 - ME51 ME57 Contract as source of supply
    A contract that is valid on the delivery date but not on the current date is not taken into account in the source determination process.
    Cause and prerequisites
    This is programmed this way.
    Solution
    For reasons of upward compatibility, check will continue to be carried out on basis of current date.
    However, if you wish the check to be against delivery date, you can implement the modification described under the advance corrections.
    If Note 116464 is implemented in a 4.0B Release, use the advance correction from Release 4.5A, however, in Release 4.0B the program name is LMEQRF01.

  • Maintaining the scheduling agreement/ po number in the source list?

    Hi,
    What is the advantage of maintaining the scheduling agreement/ po number in the source list?
    Thanks

    This numbers will becomes mandatory if we go for "Optimized Purchasing".
    If we run MRP, the system will creates PR / Automatic Schedule lines.  For this purpose system will take the PO/Schedule Agreement Number from source list.
    Rgds.
    Karthi

  • Source List v/s Info record

    Hi ,
    I have created a source list for a vendor , Material , plant and Purchase org combination.(This is NON FIXED source)
    When I try to assign this source automatically (thry ME56) to a purchase req...... System is not showing me that source.
    But If the corresponding info record is also created , system assigns it automatically.
    Does it mean that in order to make a source list valid (so that sources can be appeared and assigned to PR) , it is mandatory to create corresponding info records.
    Regards
    Sandeep marwha

    Hi,
    The below are required(Must) for Auto PO Creation:
    1. Auto Po tick in Material master
    2. Auto Po tick in Vendor master
    3. Info record
    4. Source List.
    If it is Fixed vendor , even ME58 step is not required...you can directly used ME59N...
    If it is not a fixed vendor for that material,,,in ME58 you can choose(assign) any vendor and process the PO creation.
    Thanks,
    Kumar Arcot

  • GRN vs Schedule Agreement validity Date

    Dear All,
    We got very severe issue, we have created the Scheduling Agreements(document type -LP) between the two plants (Cross Company Codes) with the vendor code created under the Account Group : 0007.
    During the creation of the Scheduling Agreements , we have not assigned the Plant code in Vendor Master (In Purchasing organisation data-> Extras-> plant Assignment).
    So the shipping data did not get determined per material in scheduling agreement and scheduling agreements created as the normal Scheduling agreements (NOT as Stock transfer scheduling agreements)
    and plants started doing the transaction(In Production server) as Normal Purchase Sale (by creating sale order and GRN via Scheduling Agreement) .
    But now , it is required to change the process via Sale -Purchase to Stock Transfer , so we have changed the Vendor master and assign the Plant to the vendors.
    But the transaction has been going on already created scheduling agreements. So how Delete/Close the existing  scheduling agreements. and we need to create new scheduling agreements(Stock transfer scheduling agreements).
    I have tried out with Validity period (by shortning the Validity Period) , so that existing SA should NOT be invalid for GRN, but GRN date has no control with Validity period of SA.
    Please suggest how to go about it.
    Regards
    Nitiin

    Hi,
    Try This
    Do not maintain Delievry Schedule in Me38 or you can try with setting Block vendor in Source List or you can change validity period in source list.
    Regards,
    Vikas

  • No effective source of supply despite valid source in Source List

    Hi,
    Can somebody help me why I can't assign source of supply in PR when I already have multiple valid vendors with info records maintained on the material? I'm using MPN material to maintain info record. I have checked all my master data with validity dates and they are all valid. Also, I noticed that there are no effective source displaying when I do simulation inside ME01 (Source List). Maybe that is one of the reason why I can't assign source of supply in PR.
    hoping for an immediate reply.
    Thanks,
    MM

    If it can't find ANY source and you definitely have FULL info records (I mean manually manitained with ME11 / 12) and you definitely have sources in the source list, then are these entries correct, are the date ranges valid, is the P org correct?
    This functionality WILL work if the data is set up correctly but there are lots of small elements of that data that could stop the system from determining a valid source.
    Try changing one of the entries in the source list (just the date for instance) just to see if there are any warning messages triggered.
    Steve B

  • Source list Automatic with Info Record data ..ME05  ??

    Hi experts,
    how to create  source list  automatic with inforecord data.
    i mean how to use  T-code /ME05. what is the steps are involved.
    Thanks in Advance,
    Anthyodaya.

    Hi,
    For all those materials in that perticular plant you want to create source lists to be generated will be given as input materials and based upon the Genarate all records for material/plant ,excluding outline aggrements Or outline aggrements onlyradio button you selected system reads the documents as per the radio buttion and finds the vendor and for that vendor as per the valid from and valid to dates system creates source lists.
    Regards,

  • ME05 How to schedule source list job with steps?

    Can someone please give me instructions on how to create source list ME05 in background using "Steps"? I know how to create a background job in ME05 but need to have several jobs run back to back in the middle of the night. I am reluctant to shedule them at different times and would prefer to use the "Steps" function. Thanks for your input!

    Hello
    Steps:
    First create variant for the report in normal execution mode (to provide input selection parameters in backgrpund)
    1. Transaion code SM36
    Give Job name you want created (Give some meaningful name) and Press enter
    2. Give the ABAP program name
    3. Select variant and save the selections
    4. Come back to initial screen , select the Start condition button and provide the interval as per requirement to schedule the job and save.
    5. Save the job.
    Check the Job in SM37 and relase the Job.
    warm regards
    Rama

  • How to select column dynamically with sharepoint list as data source in ssrs report

    Hi all,
    I am creating reports from SharePoint list but i have requirements to select the column name dynamically with SharePoint list as data source. I didn't find any way of doing this.. 
    Can anyone help me to resolve this issue..
    There is no way of specifying column name dynamically here in data set query
    <RSSharePointList xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
      <ListName>test list</ListName>
      <ViewFields>
        <FieldRef Name="ID" />
        <FieldRef Name="ContentType" />
        <FieldRef Name="Title" />
        <FieldRef Name="Modified" />
        <FieldRef Name="Created" />
        <FieldRef Name="Author" />
        <FieldRef Name="Editor" />
        <FieldRef Name="_UIVersionString" />
        <FieldRef Name="Attachments" />
        <FieldRef Name="Edit" />
        <FieldRef Name="LinkTitleNoMenu" />
        <FieldRef Name="LinkTitle" />
        <FieldRef Name="DocIcon" />
        <FieldRef Name="ItemChildCount" />
        <FieldRef Name="FolderChildCount" />
        <FieldRef Name="test_x0020_date" />
        <FieldRef Name="title2" />
      </ViewFields>
    </RSSharePointList>

    Hi MNRSPDev,
    Sorry for the delay.
    According to the current description, I understand that you want to specify column name in dataset query designer dynamically when using SharePoint list data source.
    Based on my research, this is not supported by default. As a workaround, you can use XML data source. The XML content can be embedded directly within the query. This lets you use the expression capabilities within the processing engine to build queries and
    data dynamically within the report. And it can be used for retrieving XML data directly from an external data source, passing it using parameters, and embedding it within the query.
    Reference:
    http://www.codeproject.com/Articles/56817/Dynamic-Reports-with-Reporting-Services
    Hope this helps.
    Regards,
    Heidi Duan
    Heidi Duan
    TechNet Community Support

  • System not checking the source list while creating Scheduling Aggrement

    Dear Gurus,
    when i create a PO for a material(XYZ) which is not having a vendor(100) in the source list the system throws me a error message sayin that the vendor(100) is not maintained i the Source list.
    but the same is not happenin when i create a Scheduling aggrement.
    Can you please advice me which setting i am missin here?
    Thanks...
    Kumar

    Hi,
    Are you trying to create the Scheduimg agreement for the same plant as that of the Purchase order?
    As "Source list mandatoty" check box is in the plant specific view of Material master,it is possible that it is not ticked in case both the plants are different.
    Please check & advise.
    Thanks & regards,
    Kaveri

  • Can't see my Oracle stored procedure in the avalable data source list

    Post Author: Moori
    CA Forum: Data Connectivity and SQL
    Hello All,
    I've created an Oracle stored procedure which I need to use it's returned data in my crystal report but I can't find it in the data source list.
    I'm using the same schema & database and user as my sp was created on.
    Please advise.
    Moori

    Jim (also Geoff and Hal)-
    Still haven't solved this. Here's another try at a screenshot, showing just below this text for me, of my Library interface showing the C drive listed in the left panel and not showing the C drive contents. Only, as you said is intended, what is already in Lightroom.
    I thought if I was not in "Catalog" I had been able, in the past, to select from anything in my C crive simply by opening that folder in the panel.
    When I click import it is usually - from memory - to start the import of the already selected items. For a time that's what was happening from the above screen if I selected Import. It would apparently start re-importing the selected items and without presenting the usual familiar dialog asking about file naming, etc. Now, however, clicking Import bring up this:
    Never saw this black horizontal dialog box before this situation arose. I was able to import but not as usual and I would like to get back the square (moreso at least) "white" dialog box. No clue what's going on or how to get bact to familiar ground. Ideas?

  • The SharePoint list query is not valid: Data at the root level is invalid. Line 1, position 1. (rsSPDataProviderError)

    Hi there,
    All my reports are throwing below error in a sharepoint site configured with Access services. Does anyone have a clue what's causing it?
    An error has occurred during report processing. (rsProcessingAborted)
     Query execution failed for dataset 'Default'. (rsErrorExecutingCommand)
     The SharePoint list query is not valid: Data at the root level is invalid. Line 1, position 1. (rsSPDataProviderError)
    Thanks
    Manvir

    Hi Manvir,
    For troubleshooting your issue, please go to C:\Inetpub\wwwroot\wss\VirtualDirectories\ find your Web Application (represented by a port number), then delete an unknown folder created by sharepoint, namely vti_cnf from all the folders and sub-folders in
    your web application.
    Reference:
    http://forums.asp.net/t/985790.aspx?Data+at+the+root+level+is+invalid+Line+1+position+1
    Best Regards,
    Eric
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Upload of source list data

    Do we have any BAPI for uploading the source list?
    Can we upload source list via LSMW and BDC?
    I am pretty new to upload/ migration, pl advice.

    Hi
    LSMW is simple one, whcih can easy to use for a functional consultant, for other ones need tech consultant assistance..
    the blw are the lsmw links ..
    http://www.sap123.com/showthread.php?t=98
    http://help.sap.com/saphelp_erp2004/helpdata/en/7f/b6f45805b111d2b41c006094b944c8/content.htm
    http://www.mydatabus.com/visitor.php?pt=downloadFile&tc=6289701541332&cl=53&cn=000003&uid=6659
    http://www.erpgenie.com/sap/saptech/lsmw.htm
    /people/hema.rao/blog/2006/09/14/lsmw--step-by-step
    http://www.sap-img.com/sap-data-migration.htm
    http://www.erpgenie.com/sap/saptech/lsmw.htm
    http://www.allsaplinks.com/lsmw.html
    http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
    LSMW for Material Master
    http://help.sap.com/saphelp_46c/helpdata/en/f6/ca0766a7a911d1950500a0c930e0da/frameset.htm

  • Source list mandatory only for scheduling Agreement

    Hi Gurus,
    My client wants to make source list mandatory only for scheduling agreement. While creating scheduling agreement for a particular type and saving it should be mandatory. But for Purchase orders and contracts this is not required. If i do it through OME5 then it becomes mandatory for PO and SA both. Also if i set in material master it becomes mandatory for both.
    Please let me know if there is way to do it.
    Thanks and Regards,
    Yuvaraj

    It doesn't make too much sense, but... do you want to be sure (garantee) that the source list has been created and it is relevant to MRP when you have a schedule agreement? perhaps you can use a user exit when you save the schedule agreement to create the source list.
    There is no standard functinality that's allow you to requirer the source list according the po type.
    regards.

Maybe you are looking for

  • Help needed with Windows 8.1 boot and recovery issue

    Hi. I hope someone can help me out with this Windows 8.1 issue. A friends computer (HP 2000-2c27CL Notebook) was badly infected and while I was able to do some cleaning in normal Windows I had to do some in Safe Mode. I was not being able to access S

  • ITunes won't play .mov QuickTime files anymore

    My hard drive crashed two weeks ago and it has been replaced and almost all of the information was salvaged--thank god!  However, now in iTunes when I go to play a movie that previously played in iTunes, it says that the file requires QuickTime and t

  • How do I retrieve my Exchange contacts cache?

    I accidentally deleted an Exchange account from my iPhone that has most of my contacts linked to it.  Unfortunately, my contacts were not backed up in iTunes or on the iCloud and the Exchange account is from a former employer.  Does anyone know of a

  • Problem in proxy?

    hi all, i am generating INBOUND proxy and my structure in IR are..............datatype name:Empcards  and message type:Empcards so my quetion is were will i get the data and how can i declare it .....i have to pass all records into work area and i wa

  • Data Log File Refnum Type Def Bug??

    Hello, I just found some quirky behaviour (LV 7.1.1): 1. In the attached LLB, open "RefnumVI.vi" 2. Select the Data Log File Refnum control and open it for editing (Edit - Customize Control ... from the menu) 3. Close "RefnumVI.vi" but leave "Refnum.