Scheduling Agreement Release Strategy Issue

Hi,
We have a typical problem in Scheduling Agreement Release Strategy.
Once the SA is released for the first time it should restart the release strategy again if there is a change in Quantity or Value or Purchasing group. The release strategy is getting restart for some of the release strategies and not for others. I compared the characteristics, class for both the release strategies and I am not seeing any difference.
Can anyone please help me in this regard.
Thanks in advance.
Regards
Ram

release strategy can be rerigger in case where qty or price change and the changes is over the percentage you defined for Release indicator
goto release indicator config and in SPRO for release strategy and check the Value change %
maintian 0.1 here
so any change above 0.1 will retrigger
and maintian value 4 in chgable field.

Similar Messages

  • Schedulling agreement release output issue/.........

    Hi All,
    This issue is related to scheduling agreement release. I've mentained condition record for doc type/ purch. org/ vendor through transaction MN10 for this.
    Now i am maitaining Delivery schedule for this, but system is not fetching the output type automatically here. Nor its is allowing me to put it manualluy as the whole field is greyed out.
    Can anybody help in resolving this issue?
    Thanks in advance.

    >
    aakansha kumar wrote:
    > Hi All,
    >
    > This issue is related to scheduling agreement release. I've mentained condition record for doc type/ purch. org/ vendor through transaction MN10 for this.
    >
    > Now i am maitaining Delivery schedule for this, but system is not fetching the output type automatically here. Nor its is allowing me to put it manualluy as the whole field is greyed out.
    >
    > Can anybody help in resolving this issue?
    >
    > Thanks in advance.
    Check if your output type is present in the output type determination in the following path:
    Materials Management -> Purchasing -> Messages -> Output Control -> Message Determination Schemas ->  Define Message Schema for Scheduling Agreement Release/Expediter
    Also check the analysis tab while you check the SA release, it will give you clearer idea about the problem.
    Regards,
    Aroop

  • Scheduling agreement Release strategy release indicator

    Hi all
    For the Scheduling aggreement Release strategy is present & release indicator is 6 , Now the requirement is whenever user is changing the any value Scheduling agrrement it should go for rerelease. for any minor change in value even the value lies between the same Release strategy 
    Release strategy is configured on Purchase group & Value character
    Also what is the difference between release indicator 4 & 6. for any changes in the SLA release strategy will be reset in this two release indicator.
    Thanks & Regards,
    Rajesh

    Hi,
    This is a standard phenomena any change in value (increase)will reset the release stategy
    and indicator 4 & 6 are same only in case od indicator 6 if you have taken the oout also it will get affected

  • Schedule Agreement release report

    All,
    Is there any report to have the Schedule agreement releases to be generated online or in background?
    Kindly advice.
    Thanks

    Hi,
    Pls go to ME3N, choose dynamic selection on the top
    Release group
    Release Strategy
    Release indicator
    Release status
    Subject to release
    and execute, you get the report accordingly.
    Reward points
    Thx
    Raju

  • Scheduling Agreement Release Comparison

    Hi Experts
    does Scheduling agreement release comparison works for JIT delivery schedule (Doc Type LP) in SNC?
    if yes then how it works and how it is different than forecast delivery schedule release comparison (Doc Type LPA)
    Thanks

    Hi Indira,
           The are two ways to address your business case :
    1. The simple way is to forward the work item to the concerned person (by selecting the user from user list) for releasing the work item.
    2. In the second option, we need to modify the workflow. A conditional work item (Accept/Reject) needs to be inserted immdtly after the SA workitem to accept or reject the user decision. Based on the decision, the workitem will either show him the SAP user list to redirect the same for releasing or it should go to the concerned user automatically (in static agent assignment). In case of acceptance, it will go to next step bypassing the rejection loop.
    In case of any further queries, please revert.
    Regards,
    Ashish J. K.

  • Delete/Stop Scheduling Agreement Release (Purchasing)

    Hi,
    I have a question concerning releases of a purchasing scheduling agreement in SAP APO. Basically very simple - how can I delete them or at least stop them? I did not find any transaction or report to do so (only for SD scheduling agreement releases). I know that there is a functionality of "dynamic stopping" of release done by the system but how can I do it manually? If there is no such function (which I could not really believe) what would be the business scenario to stop such a release (releases are created by APO, but I manually want to delete them). There has to be such functionality...
    Many thanks in advance
    Christian

    Hi Christian,
    Pl check this document..
    if it helps that would be great for me..
    http://help.sap.com/saphelp_SCM700_ehp01/helpdata/en/22/ec9d3b0ec10670e10000000a114084/frameset.htm
    Thanks,
    Bala.

  • Print scheduling agreement release with zero demand

    Hello all,
    we have a print problem with purchasing scheduling agreements:
    when I go to ME38 to the scheduling agreement release docu and print out the latest release which has a zero amount for scheduled quantity, I'll get the error message
    no print relevant changes to document xxxx exist.
    ME140
    I know there are already some threads about this topic in the forums but I was not able to find a helpful answer yet.
    Thanks
    Anne

    hi
    please check the message which are already available status is "Green". if its green you have to create another message and you have to print it again..

  • How ro delete/cancel procurement Scheduling Agreement Release in APO system

    Hi,
    Can you please tell me the ways to delete procurement schedule agreement release in APO system.
    I have gone through the thread "How to delete the old schedule line release? and found two transactions but it seems both the transactions like /sapapo/cmds_del  & sappao/cmds_sc02 are used for sales scheduling agreement release deletion.
    The system is not allowing me to delete the same in APO system as these are APO scheduling agreements.
    Please help me on the same.Thanks in advance.Revert back if any further clarification is required.
    regards,
    kaushik

    Hi,
    Thanks for your reply again.
    The /SAPAPO/DELETE_PP_ORDER program does not select the release schedule lines though it selects the Scheduling Agreement Schedule Line (Not released) for deletion.
    The transaction /SAPAPO/PWBSRC2 for Deleting External Procurement Relationship but as long as the released schedule line exists , it is not possible to delete the scheduling agreements.
    I have gone through the help.sap.com site and I was not able to found anything about deletion or cancel/closing of Scheduling Agreement Release.
    Still waiting for the solution.
    regards,
    kaushik

  • Deactivate Scheduling Agreement Release Profile

    Hi,
    We have configured scheduling agreement release profile for JIT and forecast delivery schedules.
    For some reasons we do not want to use the release profile, we do not wont schedule line release using ME84.
    Can any one pls suggest how to deactivate the release and also if any other settings has to be unchecked.
    Pls do the needful.
    Regards,
    Neha

    Hi Prashanth,
    Changing the setting from 2 to 1 in source list will not be relevant as schedule lines has to be generated while MRP run.
    I understand that if the material is checked for JIT in material master and when the Doc type is LPA then the scheduling agreement automatimatically goes for release. Correct me if I am wrong.
    Should the config setting for creation profile to be deleted from SPRO settings.
    Pls lemme know.
    Regards,
    Neha

  • Scheduling Agreement Release

    Hi All
    Scheduling agreement is created & released. Release indicator is 6, after the release again some line items are blocked & some line items are deleted without affecting any characteristic of release strategy
    ( No Change in value , Document type , Purchase group on which release strategy is based)
    Wheteher release strategy will be reset in this condition form release to unrelease
    Please suggest
    Thanks in advance
    Regards
    Rajesh

    Hi,
    If no user exit is activated in support for your release strategy, then any change which results in no revision of your original value will not cause any release strategy reset.
    Cheers,
    HT

  • Schedule agreement releases

    How I will come to know the Schedule Agreement is released or not in ME84? LPA is agreement type.
    ME84 I have executed and next screen green light is coming.
    But while going to ME33L and seeing Release number ,its 0.
    Please explain how I can do this?
    Thanks

    Hi PS,
    You need to output the last relase. Once you process it's output successfully, it would be considered. Otherwise not.
    Any release which is not transmitted, is not considered as valid for use in SA.
    Sanjeev
    Edited by: Sanjeev Shrivastava on Mar 24, 2008 6:50 AM

  • Purchase requisition release strategy issue

    I have created release strategy in development, it was working fine with work flow. When I try to import the TR's I found that the document types in development are not in quality so I changed the document type. then I tried to create a PR and when I clicked on messages its not triggering the release strategy don't know why. In total there are 2 characteristic plant and document type.I even tried to delete the plant characteristic and tried again creating PR but still no use. let me put some screen shots comparing the development and quality. Please do help.

    Thanks for the quick reply, I just checked that the over all indicator for the development and quality, I found that in development its not activated while its activated in quality will that be of any issue.
    In development
    In Quality

  • Scheduling agreement release in APO

    Hey Gurus,
    We are planning and releasing scheduling agreements in APO through the product view.  The problem that we are having is that we can't see these released schedule lines in MD04 after the schedule lines are released in APO.  Is there somethign with the CIF that needs to be set up for this?  We already have integration models set up for PIR's and SchAgreements already.
    Also, we checked the /SAPAPO/CCR reconciliation report and didn't see anythign stuck in there   Do you guys have any suggestions for us?
    Sincerely,
    Kris

    Hi Kris,
    Please check the the distribution definition has been maintained for each location
    SPRO:
    Integration with SAP Components
    Integration via APO Core Interface (CIF)
    Basic Settings for Creating the System Landscape
    Basic Settings for Data Transfer
    Publication
    Maintain Distribution Definition
    Publication type: "confirmaiton for scheduling agreement"
    Regards
    Julien

  • PO Release Strategy Issue

    HI,
    We have created a PO release strategy workflow.All scenarios are working fine except 1 scenario.
    That is,when a PO is created and rejected by a user in user decision step.The workflow will end.If the PO is changed(amount) again,the release strategy is triggered for the same user.But the workflow is not triggering.
    If the release strategy is for a different user,its triggering the workflow.
    I have used a fork inside which 1 parallel branch contains a wait for significantly changed event & another branch contains the user decision step,po release step & rejection reason scenario.
    Can anyone tell the solution for why the workflow is not triggering for only this scenario?
    Thanks,
    Aparna.

    Feddie wrote:>
    > Kjetil, I am not clear still, could you explain me a bit clear. I have not seen any tool tip in my release tab.
    Don't you see any buttons in the subscreen? The tooltip is not for the tab (title) it is for the button. I am quite sure there is a button there for cancelling the rejection, but without access to a system where this has been set up I can't check it. I just had the same issue before Christmas, where the users said the solution didn't work for the same reason mentioned here - no workflow was sent after changes where made. In fact the solution did work flawlessly as soon as they cancelled the rejection.
    See also [documentation at help.sap.com|http://help.sap.com/erp2005_ehp_02/helpdata/en/4c/16443c4a089537e10000000a114084/frameset.htm|ERP release ECC 6.0] for the workflow for rejected purchase orders.

  • Scheduling agreement releases in ME84

    Hi All,
    I have create a scheduling agreement and maintained the same in a source list. The after I executed MRP (MD02) schedule line were created for the scheduling agreement from the MRP run.
    But now when I go to Txn ME84 and try to create releases I do not get the scheduling agreement I created here. I have maintained the condition record for conditions LPH2 and LPJ2 in NACR. But still I get error as "No data for chosen selection" for my SA.
    What am I missing here?
    Regards,
    V S

    I checked further and found that the SA was not released. so released it in ME35.
    But now again I get an error that "No schedule lines exist"
    I get this error if the scedule lines have been created by MRP, buit if scedule lines are created manually in ME38 in ME84 schedule lines are released properly.
    Any clues why it is so?

Maybe you are looking for